speaker cleaning Z580

Similar Questions

• Z580 - speaker cracking

  the output in the left and right speakers in my Z580 is not equal. I suspect it's done on purpose, so that the sound will be in stereo and 'deep' etc, but the left speaker has a tendency to crack at very low and very high frequencies. is there any solution for this?

  I wasn't on the VLC Player and, as you may have read, the speaker creaked to any software I used (e.g. tests of sound in the control panel - I don't think that could influence the VLC). the solution was to send the laptop to Lenovo Service and they replaced the faulty speaker.

• How do I eject the speaker (audio beats) for cleaning coverage

  My laptop is hp (dv6-7180se) and I want to clean the perforated lid which exists on speakers beats... Look at the picture:

  

  I can open it without screws open back?

  Please I need a few details to eject safely

  Hello @Fantastico,

  I read your post on how you're looking to clean the surface of your laptop speaker, and I'd be happy to help you in this case!

  As noted in Service and Maintenance Guide for your laptop, the only way to remove the top cover, where the speaker is to:

  1. Turn off computer
  2. The laptop power down by unplugging the power cord
  3. Disconnect the battery (see battery page 46), then delete the following:
  • Hard drive (see hard drive on page 47)
  • Optical drive (see optical drive on page 54)
  • Keyboard (see Keyboard page 57)

  Unfortunately, some removal of the screws will be necessary to remove the top cover and the speakers. The steps below should help to remove the cover in order to clean underneath:

  1. remove the seven Phillips PM2, 5 × 8. cover the 5 screws that anchor the top of the computer

  

  2. remove the three Phillips PM2, 5 × 5. cover the 5 screws that anchor the top of the computer.

  

  3. remove the nine Phillips PM2, 5 × 3. cover the 5 screws that anchor the top of the computer.

  

  4 place the right computer, with the front facing you.

  5. open the computer.

  6. release the corresponding ZIF connectors and then disconnect the following cables
  map of the system:

  Office button power cable (1)

  (2) TouchPad button Board cable

  (3) to fingerprint card reader cable

  (4) top of page cable speakers

  

  7. remove the three Phillips PM2, 5 × 5. cover the 5 screws that anchor the top of the computer.

  

  8. lift the back edge of the top cover (1) to the left and right sides have abandoned
  the base box.

  9. remove the cover (2). Make sure not to damage the thin base (3) around inside of blade
  Bay optical drive when you remove the top cover.

  

  10. reverse this procedure to install the lid once more.

  reference: http://h10032.www1.HP.com/CTG/manual/c03582006.PDF 

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• {a} speaker on a clean install, XPS 410 - Spware Possible problems / Malware *.

  I recently did a clean install on my XPS 410 due to blue screen problems when you set up a wireless network in my house.  Everything seemed to go well--is something that I did several times on multiple computers, this one included.  But this time my speaker system (Dell A525 30 Watt stereo speakers with subwoofer 2.1) obviously caused a problem.  I have the drivers for all my devices on my external hard drive, and they are labeled.  The driver for the loaded speaker system but was still yellow in Device Manager.  I also kept getting the message directly after loading windows: "entry point procedure LocalizeString is not found in the dynamic library STLang.dll."  I could click OK and continue. Slowly.  I looked on the net and find it is quite frequent - everyone seems to have a way to heal, but there are always strings, and none of them work in all cases.  One thing all agreed terms of sound equipment.  And it was the only yellow marked item, I had.  In fact, he showed in device as Manager: "SigmaTel High Definition Audio CODEC".

  I became exasperated to the point I disconnected the sound system and removed from the room!  I have attached an old Dell speaker system and it worked for a few sounds and then stopped.  Finally, I removed the original system, as shown just on top, using Add/Remove programs.  After the message has disappeared so I am sure it was the problem.  Then, when I couldn't others in work, I decided to restore to the point just before I removed this system 'SigmaTel '.  Fake!  Of course, he came back as did the error message and I have been unable to get these old speakers installed no matter how hard I tried!  (I don't have the driver for that precisely, but the required system to come with something that didn't work).  Again, I tried to uninstall the SigmaTel program but it wouldn't let me!  It would take me to a Web site that was of no use to me.

  In its current form, I spilled the system restore point and the SigmaTel is gone as is the error message.  But I have no system of his work on my 410.

  Any ideas out there?  I was a member of this community almost since the first day and have had excellent results in the past.  I bet that someone knows how to help me.  (Anyone remember Denny Denham?  I know he's not there to help more. Always wondered what happened to him.)

  Thanks in advance.  Bessie

  It is up to you, but analysts on sites like SpywareInfoForums, SpywareHammer, Bleeping Computer, Geeks to go, The technical support Forumsand MalwareRemoval Forums, in contrast to support tech OEM and other forums, are trained to stay with you to the resolution and to remove their tools (assuming that yields of poster for tracking) so that they do not remain on the system to help you "trouble." They probably perform you analyses to one or two who will spot (hopefully) corresponding to this registry entry. After that, they will give you a registry file that you can download and double-click to merge with your registry. This should solve the problem. We have used to do this free individual support here, but Dell abandoned a year ago.

  I wish you luck for any route you choose to take.

  Kind regards

  Bugbatter

• speaker to ear iPhone 6 seems very small

  speaker to ear iPhone 6 seems very small

  Hey Chief Nir.

  From what you describe, the sound of the receiver seems low for you. Let's go over some troubleshooting to get smooth it.

  Start by taking a look at your receiver if something blocks or if it needs to be cleaned. Read the article below for more details and additional details to help solve this problem for you.

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone
  https://support.Apple.com/en-us/HT203800

  Take care!

• I dropped the cream cheese in my speaker

  I dropped my phone down speaker in my bagel and penetrated my speaker of cream cheese and now the sound is muffled and I can barely hear at full volume.

  There is no way to clean that. Try to introduce something to remove the cheese would only push it more later in, or if you've tried some type of liquid, it would be still worse. I suggest make you an appointment at the Apple store nearest Genius Bar, explain the situation and they can explain your options. It would be more than likely one out-of-warranty replacement. Good luck.

• IPhone price 6 spare speaker?

  I have a problem with my iphone 6 speaker, the sound come out of her is not high either pure I heard other devices, I know it's maybe a hardware problem, I tried to clean the dust, but the sound remains the same

  here in Egypt we have no support from apple, so I want to know how much it will cost you if want to get it from apple as an original spare part

  I'll ask a friend to get it and send it to me with any shredding company

  Apple doesn't sell parts, so you can't get it from Apple.

• Speaker problems on I phone 6

  My phone I have 6 was originally blocked on the headset mode. However, I cleaned the plug of the listener with a q tip that seems to have taken off headset mode. The problem I have now is that during phone calls my voice vibrate and may not be heard by the other person when you call. I have only heard when it is on the speaker. Help, please.

  Hello Banjo7,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to make calls reliably, so I'll do everything I can to help and get your phone works as expected. It sounds like you were on the right track with the headphone of cleaning, it is possible, there is debris still in decision-making that makes contact with the material that triggers the phone looking for an external Microphone. Before get us too far though, go ahead and reboot the iPhone just to be sure it is not hooked on this mode.

  If you have canned air as the type that is used to clean computer keyboards you can have the cleaning with this chance, and there is little risk of damaging anything with this method. If the problem persists you can contact your local Apple retail store or authorized, service provider you can find here:find

  If you experience problems or have questions, the entire community is here to help.

  -Best regards-

• A new facility to clean impossible Yosemite (France)

  Hello, here is a summary of my current problem: (4 months of problems)

  1. - Etrecheck Software v2.9.11 refuse to run on my Yosemite 10.5.5
  2. -Usual utility of Apple to Report system does not work, unfortunately, I can't tell you the details of my setup.
  3. -Little disk space left on the disc SSD on which the iMac booted.
  4. -Impossible to Run Time Machine on a Time capsule 3 To, in anticipation of this relocation. the backup does not complete. (7 x a day of waiting)
  5. -Ofother partitions of the disk internal to back up however. But I don't have a big enough external drive.
  6. (- A system current completely corrupted which generates many system crash) seen the of in Console.
  7. -Many to many senior Apple Avisors of AppleCare calls unanswered. Without convincing results.
  8. -The installer on a USB bootable backups impossible (even with X DiskMaker 9.0.3 compatible El capitan) car myself the Applescripts seem to no longer be accepted normal system.
  9. -Recovery at inoperative startup procedure.
  10. -Start without the by extension shift key at startup, repairs the permissions from the ineffective recovery partition.
  11. -No malware to my knowledge, little consolation.

  Issues related to the:

  • What drives me GEN it pour out of this impasse (USB2, Thunderbolt) preferably available France
  • What alternatives do I have?

  I am contactable on *.

  -An attempt to translation-

  1. I can't use the latest version of the app EtreCheck (crash)
  2. I can't read/copy/past utility used to Apple on the system details.
  3. I have on my iMac 12.2 (see my Apple hardware, if you can) 3 different partitions, 1 only on the SSD drive that contain the system disordered with probably not enough free space.
  4. No matter what backup process Time machine on a Time capsule (3) ends (or needs more of a week)
  5. I have to save the two were leaving out the SSD system drive before a pure install. No big external drives to use now (tips are welcome)
  6. The current system is too bad messy (but it works well with a huge list of system crash, I sent to Apple engineers)
  7. No French speaking Apple "senior" advisors helped me from start to end about it until now
  8. No dongle initialization to avoid a new download of the system. Some dedicated software (using AppleScript) in the form X DiskMaker abandoned 9.0.3. They refuse the task.
  9. Everything confers start as no effect on the health of the system. As far as I know. Even with the appropriate method and the long download recovery tool it implies.
  10. Same thing with starting secure, or new admin account...
  11. But I have no malware, for the moment. but had one before. Don't remember his name.

  In this case, my questions are:

  • How to find a cleaning method in order to make a sort of cleaning and installation safe and successful if possible, without losing my data partitions

  (btw, I think I read all official publications Apple on this topic.)

  • Large hard drive you can advise me to buy (able to boot) USB2/USB3 or Thunderbold... SDS are are too expensive, unfortunately.

  One more thing... (lol) I have a Macbook Pro already on El Capitan with no use of the iMac to MacBook Pro Migration Tools

  Best, *.

  < published by the hosts of personal information >

  Finally, I got it with Etrecheck (PDF) but I don't know how to handle items that are odd (sorry, French and English mix annotations)

• Satellite X 200-251 lights after cleaning the speakers

  Basically, my laptop is suffering from overheating problem because the fan should be cleaned. I decided to give it a go myself and unscrewed all the screws below etc, released the album cd and battery and removed the plastic Panel that covers the speaker who has the power button and other buttons on it.

  So I decided to check the Internet for a guide on how to get to the fan. Ultimately he appeared more complicated then I thought and I dropped but I thought I might as well give the speakers clean up a bit because they were pretty dusty.

  So I'm on a rag and a cotton swab with one end covered with Wd40 and began dusting off a cleaning. Then I put the Panel in place, put all the screws underneath of the laptop and returned battery and plugged the power cable. But... When I pressed the power button would not turn on!

  The small lights that indicate to the laptop is plugged in and the battery is in are turned on, but nothing happens when I try and turn it on. Also I can't get the cd player to stay, it keeps slipping out! I would really apreciate to help here!

  BTW, the model is satellite x 200-251

  Hello

  Looks like something was wrong during disassembly.
  It s really hard to say what role could be affected he sounds a little like the CPU might be that he touched s not connected correctly I also recommend to check the RAM modules.

  Memory modules must be inserted correctly check this box

• Envy 15z-J100: failures recurrent speaker

  My problem and the fix looks like this: http://h30434.www3.hp.com/t5/Notebook-Audio/HP-Envy-15-3040nr-Sound-Stopped-working/td-p/2673061

  I've been systematically uninstalled, place, reset, reboot on average 3 times a week since May. And I became very effective home by the practice, but not effective enough for that to be a satisfactory solution. The issue has become much too disruptive, and I need a more permanent solution.

  The problem is that the speakers will fail completely, although headphones with MIC still works. It is generally during the execution of applications that play many voice samples, although extended playing music with lyrics or movies with the dialog box are not always the cause of the problem. These failures of speaker accompany abnormal overheating and more to the left of the Board, go round around the power button and the spread in all directions, especially under the laptop through the keyboard. It is probably close to the graphics card and processor, but the GPU use seems to have minor bearing on instances of failure.

  Cooling of the air around the laptop delays but does not prevent the failure of the speaker, and as you can imagine, it became a hack expensive during the summer. I cleaned the vents with compressed air and therefore the restriction of air flow electronic cleaners would not exacerbate the problem.

  All the drivers are all up to date, but another audio driver would solve this, or perhaps remove Beats Audio installation?

  Hi @enkephalin07,

  You were technically brilliant. It has been a privilege to have worked with a person of this caliber and technical skill levels. I tried everything I could think off to correct the situation. In addition, the problem occurs intermittently and you need to go through the boring of hard reset process and the rest of what you describe in your first post is in and functional. You need to do periodically which means that there is more to what meets the eye, and with a material question could perhaps be corrected.

  As a last resort, I actually spoke please contact the HP support by phone to get the computer repaired for questions that you currently have with it. Please try to do it at your convenience. I really hope that things work out great for you and the machine remains healthy for a long time to come once you have repair.

  To simply say thank you, please click the ' Thumbs Up ' . If you need more assistance let me know and I will gladly do whatever I can to help.  You take care now and have a nice day ahead.

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• Moisture in call iPhone speaker

  I was with a damp Microfiber cloth to clean the screen of my iPhone, but I accidentally erased on the small speaker, used for calls over the screen and FaceTime camera. Is it possible that moisture can damage the phone at all since the speaker is an opening towards the device.

  Well, anything is possible, but your choice of words, I wouldn't worry.

• IPhone 6s off right speaker doesn't work is not on the helmet

  IPhone 6s off right speaker doesn't work don't not on the helmet, tried 3 different sets of headphones, have tried to clean shooting, reloading the OS etc., checked the slider etc, still no joy, any suggestions very welcome. It works on both speakers if I don't push the CAP fully home (but he then falls easily).

  Are you sure that you're pushing all the way?  If you are, this looks like a connector damaged in the phone. As a 6 s that it is still under warranty, then take it to an Apple store.

• Qosmio G50: How to clean the speakers under transparent cover?

  Hello

  In the transparent cover who are pregnant, they gathered dust and moisture.
  Can someone tell me how to get to clean;

  Thank you

  Hello

  I guess that transparent speaker cover cannot be removed separately.
  I think that it of a part of the top cover and I guess you will have to disassemble the whole laptop in order to get access to the speakers
  Simply said; It s not worth a try!
  Laptop disassembly is a very delicate procedure and I would risk any damage part only to remove some of the dust of the coverage of the speaker