Speaker not working after installation of Service Pack 1 of Vista.

Similar Questions

• After installation of Service Pack 1 for Vista 64 bits, Windows Security says Malware and firewalls are off.

  I recently reinstalled my copy of Vista 64 bit I hope to solve this problem that has been with me for a while.  Before I wiped and reloaded, Security Center Windows would alert me every day that my firewall protection and malware have been disabled.

  I use Kaspersky Internet Security, which is fully updated and works as it should.  I am able to activate Windows Firewall and bypass the firewall Kaspersky and that error to go away, however, I can't remove the error of malicious software.  I got all these errors directly after a restart after the installation of service pack 1.

  Under Windows Security Center it says, "Kaspersky Internet Security reports that it is turned off," under the heading for malware protection.  When I click on the button to activate under Windows Security, it goes through the steps who say do you trust this program, Yes, Yes, ok.  After choosing all the options of trust Kaspersky and activate this protection, he thinks about it a little, but always returned and said it's off.  It also has a green light saying that Windows Defender is actively protecting your computer.

  I think that my Internet Security Suite is successfully active in these areas and work I checked the menu, check that they work.  In my opinion, after installation of service pack 1 that something I have messed up in the statement that those programs are active or really uninstalled them.

  Even if I can get the only message that the Kaspersky firewall is disabled to disappear by enabling the Windows Firewall, which is not yet as I want.  I want the suite of internet security that I paid to be active and functional on the side of the Windows security features.

  I would appreciate any help with this problem by addressing why he continues to warn me that my protection malware and firewalls are disabled.  Thank you.

  Also install Windows Vista SP2 this problem could be solved, otherwise try to uninstall and reinstall Kaspersky and also, try to get the latest version of Kaspersky.

  If still the same issue please contact Kaspersky support.

• Card high speed does not work after installing Windows Service Pack for Vista

  I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work.  The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.

  What can I do to get this corrected.

  John

  Assuming that the Vista SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Audio Acer 5520g does not work after the new service pack

  I installed XP and is up-to-date. However, when a new service pack arrives, it destroyed the Realtech driver that I downloaded from the Acer support site.

  One way to recover is to do a scan complete antivirus C drive.

  Second method is to remove the speakers from the Device Manager, install the Realtech driver after the service pack update.

  The question I have now is that the latest SP crushed the audio driver again.

  Restore restore previous point never works on this or any other question, I've had with windows no matter what...

  All previous options have failed now.

  Any help appricated.

  Download the "RealTek" directly from RealTek driver. ;-)

• Windows does not often after installation of Service Pack 1

  Hello

  After installing windows 7 service Pack1 my computer responds more often and I always have to forcefully shut down the computer is there as a cmd line I can use at the command prompt to resolve this problem or is there as a solution to solve this kind of issue

  my computer is

  Acer Aspire Timeline X

  3820TG

  Windows 7

  Intel core i5

  Mobility of the ATI Radeon HD5650 1 GB graphics

  Thank you

  http://Windows.Microsoft.com/en-in/Windows7/troubleshoot-problems-installing-Service-Pack

  The most common causes of this problem are:

  • An inconsistency in the store of Windows services. Maintenance of Windows store is a feature that is required to install the service packs.

  • A program on your computer, such as an antivirus or antispyware, interferes with the installation of the service pack.

• Could not start after installation of Service Pack 1 - stop: 0x0000c1F5

  original title: stop: 0x0000c1F5

  my computer does not start after you install the service pak1 on my computer toshiba laptop, don't get into safe mode either I get an error message! 0xc01a001d! 3733/91430(\Registry\Machine\Componets\Derived Data...) and also the error code Stop:! 0x0000c1F5

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".

  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer

  http://support.Microsoft.com/kb/970101

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• PaperPort crashes after Installation of Service Pack 2 for Vista

  I have a Dell E531 system with 4 GB of ram and disk space.  I use Vista Home Premium.  I used Paperport 12 Pro on Vista SP1 without any problem.  Today I installed the Vista SP2 update, and now the application will not launch.  I get an error message that extension Paperport MV stopped working - by referring to the ppmv.exe.  I also have a separate error message with the same information on PdfPro5Hook.exe.  The site of Nuance recommedned changing DEP to only MS services and functions.  It did not work.  I uninstalled the application, rebooted, and then re-installed.  It installs fine without error - until trying to launch.  Then I used msconfig to restart without the startup items - so with no A / V and firewall.  I then ran the msi Paperport again and set up a repair.  The same problem.  I would like suggestions.

  Eric,

  Thanks for your detailed and informative response.  In fact, I completely uninstall all paperport by using the method you specified, as well as using solvents such as Revo Uninstaller and JV16 Powertools.  It did not help.  I finally got a response from shade that worked.  They sent me a zip file with the new versions of PPMV.exe and PDFPRO5Hook.exe.  After making sure that there were no process running paperport, I renamed the old files from .exe to .old and then copied the new verasions in the appropriate subdirectories.  After that, the application works again!  It took them several weks for answer me (too long), but the answer has solved my problem.  The gist of their response was:

  1 make sure that PaperPort is not active (make sure that the error message does not appear and the PaprPort.exe process fails in the Task Manager Windows).
  2. download the PPMV.zip file from the following link:
  http://supportcontent.nuance.com/PaperPort/12/ppmv.zip

   

  3. double-click on the PPMV.zip file and extract the PPMV.exe and PdfPro5Hook.exe files on your Windows desktop.
  4. go to the PaperPort 12 installation directory (default is C:\Program Files\Nuance\PaperPort).
  5. find the file named PPMV.exe and rename it to PPMV.old.
  6. find the file named PdfPro5Hook.exe and rename it to PdfPro5Hook.old.
  7 copy the new, PPMV.exe and PdfPro5Hook.exe, extracted files on the Windows desktop, and then paste them into the PaperPort 12 installation directory (default is C:\Program Files\Nuance\PaperPort).
  8. start PaperPort 12 and confirm that the app now starts correctly.

  I hope this helps others who may be affected by the same problem!

• Outlook stop working after you download Service Pack 2 for vista

  Auto Update for vista sp2 and now cannot open office outlook 2007.  Put just a message saying it cannot open Outlook.

  Hello Jon,

  Thank you for choosing Microsoft answers forums for Windows Vista.

  Please let us know the exact error code. It can be found in the windowsupdate.log file. Just click on start and in the search type windowsupdate.log box. Scroll down to the bottom of the window to check the error code.

  Apart from that, you can try the following:

  Step 1:
  
  Try to restore your computer to a time where it was working fine.

  It uses system restore to return your system files and settings to an earlier point in time, without affecting personal files, the restore points.

  For more information such as how to perform a system restore, you can follow the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx#EI

  Step 2:
  
  Disable any security software or firewall. (Note: once the problem is resolved, you can activate it back)

  Step 3:

  Install the stand-alone package for Windows Vista service pack 2.

  Visit the link below to download the SP2:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  For your reference:

  How to obtain the latest Windows Vista service pack:

  http://support.Microsoft.com/kb/935791

  Kind regards

  Savan - Microsoft technical support.

• Computer will not work after you download service pack 2 for Windows Xp

  Whenever I have download Xp SP2, my computer keeps restarting over and over again. What should I do to fix this?

  Take a look on: http://winhlp.com/node/125#Boot_or_shutdown_problems_after_Service_Pack_2_installation

  Are you aware that SP3 is available?
  TaurArian [MVP] 2005-2010 - Update Services

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• Error occurs after installation of Service Pack 3

  Windows XP starts after installation of Service Pack 3 only in safe mode.
  What about this error, the machine doesn't turn after restoration (to an old restore point) very well, but in this case that I do not have Service Pack 3.

  Can I install updates that are unique in the future, or do I have service pack 3 for windowsupdates in the future?

  Kind regards

  Pluto

  http://support.Microsoft.com/kb/950717

  Steps to take before you install Windows XP Service Pack 3

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Support: https://support.microsoft.com/oas/default.aspx?gprid=1173&st=1&wfxredirect=1

  TaurArian [MVP] 2005-2010 - Update Services

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• LR - CC does not work after installation with creative cloud. I run a W7 64-bit system

  Hello

  LR - CC does not work after installation with creative cloud. I run a W7 64-bit system.

  I got LR 5.7 running and is not installed by the CC.

  What to do

  Thank you.

  Hi Ridder,

  Please visit the solutions proposed in the following article.

  Lightroom does not launch or closes automatically after the splash screen

  I hope this helps.

  Kind regards

  Sumit Singh

• Problems after installation of Service Pack 3 for Windows xp?

  After you install service pack 3, he started down, then when he tried to start it, nothing, that would make the windows logo then a blue screen. I tried to do a system restore, nothing, I tried to move the date of return in the bio, still nothing, I was payin 120.00 for someone to sit in front of my computer for 3 hours and IT couldn't work, but he ended up doing a full system restore, fortunately, I still have my photos and music but now his works more slowly. He guard tells me to download the package, tried again and poof, done the SAME thing again, this time I did the full restore again and now I'm not even download package. Y at - it something I can do or download for my computer as if it was. I did Defrag, I did the cleaning disc, cookies.etc... I clean up all this. I'm afraid to download updates due to what happened before... Help!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it! [1]

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application (which will require to install WinXP SP3).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ==============
  [1] one who made the "repair" work & you charged $120 to do a repair installation does not know his a * of his elbow. IMHO he should take care of all of the foregoing to you free of charge.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my computer guard reboot changes back several times after the installation of Service pack 2 on Vista.

  I tried to update my computer (Dell, Vista Home premium) with service pack 2 for Vista.
  But after completing the installation, there was an error when I tried to restart to complete update and work stoppage.
  So I restarted the computer and, instead of log on screen, the message [service pack was not installed recovery changes do not turn off your computer] appeared
  and then restart automatically.

  Now it's repeating this cycle for a day!... .the message - > restart-> message-> restart...
  What should I do? I can still start windows safe mode. (the same message...)
  I have lots of important files it contains so really want to reinstall Vista.
  Please help me...

  Hi arkitekromero,

  Given that repair options did not work for you.  I suggest you try the method below.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. Rename the Pending.xml file, and then change the registry notes read the following important notes before you use this troubleshooting method. Use this method to resolve the symptom of restart that is described in the "Symptoms" section, so that you can back up data before you reinstall Windows. You must use this method of troubleshooting only if you plan to back up data and reinstall Windows. Use this method only after trying other methods. Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer for instructions on how to continue. Use this method only if the computer has no restore points or if you cannot start your computer to a point where the system restore feature is available. After using this method, the following conditions may exist until reinstalling Windows: An update is being installed may not be installed correctly. Windows Update may not work correctly. If an update is installed, you may be unable to stop the installation process. You may be unable to enable and disable certain Windows functions in option. Certain optional Windows features may not work correctly. The computer may be in an unprotected state. To rename the Pending.xml file, and edit the registry, follow these steps. Start Windows Vista and go to system recovery options: Insert the Windows Vista installation disc in the disc drive, and then restart the computer. When you are prompted to restart from the disc, press any key. When you are prompted, configure the language to install, time and currency formatsand keyboard or input method options that you want, and then click Next. On the Install Windows page, click repair your computer. In the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next. Use the system recovery options to rename the Pending.xml file and modify the registry:

  1. In the System Recovery Options page, click command prompt.
  2. Type cd C:\windows\winsxs, and then press ENTER.
  3. Type ren pending.xml pending.old, and then press ENTER.
  4. Type regedit and press ENTER.
  5. Select HKEY_LOCAL_MACHINE.
  6. On the file menu, click load the hive.
  7. Look for the following folder:
     C:\windows\system32\config\components
  8. When you are prompted for a name, type Offline_Components.
  9. In the registry editor, find and delete the following registry subkey:
     HLKM\Offline Components\AdvancedInstallersNeedResolving
     HKLM\Offline Components\PendingXmlIdentifier

  Exit the registry editor:

  1. At the command prompt, type exit to quit the registry editor.
  2. Press ENTER.
  3. Click restart.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.