Speaker PC under 'Tab speakers properties-levels' option are gone after the new installation of windows 7 Professional.

Similar Questions

• Satellite 2450-201: cannot use TV option after the new installation of the OS

  Hello

  I have a laptop toshiba satellite 2450-201.
  I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
  I was able to watch divx movies in my TV using my computer.

  I had to format the laptop and installed windows XP again.
  After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
  After that I updated display drivers, but the problem remains.

  Can someone help me?
  Thank you

  Hello

  How do you reinstall the operating system? Have you used the recovery CD?
  Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
  It is important that you can switch to the TV. In this case, you can use FN + F5.
  If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.

  However, check it and check if you have installed all the drivers.

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Qosmio F60 - boot advanced options existing after the new installation of the OS

  Hello

  I wonder about the option of advanced boot when pressing F8 after that restart the computer will no longer exist if I changed the operating system that was initially provided with my laptop Qosmio F60 "win7" to win 8.1 example

  Advanced Start menu which was part of the in Windows 7 system isn't available in Windows 8/8.1 System.
  Microsoft has changed the architecture of the Windows system in 8 Win/8.1 news and this menu has been replaced.

  Usually if the Windows 8 or 8.1 Windows would not initialize correctly, the system tries to fix the problem automatically. If the system will not be able to fix the problem automatically, the troubleshooting menu appear.

  If you want to manually access menu, you must do this within the system:
  You must open the charm bar (win key + C) then settings-> settings change PC-> update and Recovery-> Recovery-> advanced boot-> restart now

  Here is the article from Microsoft:
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

• After the new installation Pro 8 do not have the Option to download/install Windows 8.1

  I just do a fresh install of Windows 8 Pro 64 bit on my computer at home. My system has Windows 8.1 but because it is slow, I decided to do a new install from Windows 8 (because I have the CD of Windows 8, I bought a year ago).

  My new installation seems to be okay. I erased all the data and even re-formatted/partition hard drives so I know my installation would be cool.

  Now, I want to update to Windows 8.1. I understand I can get it from the Windows store. When I go to the store Windows, however, I don't see anywhere to download 8.1.

  Here's what I see:

  Main store page:

  

  Top free apps:

  

  No idea why I can't update Windows 8.1 in the Windows store?

  Thank you.

  S ' ensure that you apply the latest updates before upgrading.

  -Try to switch to a wired connection if you download over Wi - Fi

  Disable/uninstall no matter what third-party Antivirus, you may have installed before the update.

  -Do a clean boot.

  http://support.Microsoft.com/kb/929135

  You can find the details here for which the update is necessary to see the Windows 8.1 update.

  If you encounter problems with the installation of Windows Update, we recommend that you post for help with this question.

  You can also try an automated solution by running the Windows Update troubleshooting tool

  3. you must synchronize your App license; You can do this:

  * On the start screen, tap or click on Store to open the Windows store.

  * Drag from the right edge of the screen, and then tap Settings.

  (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click settings.)

  * Tap or click App updates

  * Press or click on Sync licensing

  4. the Windows store catalog is not refreshing properly.

  To refresh the catalog, try pressing the Windows key and R to open the Run dialog box type WSReset.exe and press ENTER. Restart, then check again the store Windows.

  also:

  http://blogs.technet.com/b/ouc1too/archive/2013/10/25/something-happened-in-the-install-of-Windows-8-1-can-t-be-completed-and-now-you-re-annoyed.aspx

  Also:

  1. press Windows + W and put updates in the search box, select view installed updates search results.

  2. in the window updates installed, search the update for Microsoft Windows (KB2871389) and right-click on it, select uninstall.

  3. now, using the following links, download the update KB2871389 manually package for your edition of Windows 8 and install it:

  Download link [All versions supported on x 86 Windows 8]

  Download link [All versions supported on x 64 Windows 8]

  Download link [All versions supported on x 64 Windows Server 2012]

• When clicking on a tab to select this option, it sometimes makes a new group of tabs.

  When clicking on a tab to select this option, it sometimes makes a new group of tabs. Is there a way to stop this behavior?

  We try to cook something like Outlook, but not to meddle with the support of the tab too at the moment.
  As usual, you can ask on the feature request page :)

• Old dualboot options still available after the installation of Windows 8 Pro on a desktop Pc which had XP and Windows 8 prewiev version on that front.

  Old dualboot options still available after the installation of Windows 8 Pro on desktop in XP, but now triple options. Windows 8 Pro (volume 1), Windows 8, old windows installation.  Anyone who knows how to get rid of the last two options?  The good thing is now that I don't have to put a password everytime I turn on the computer.

  Press the Windows key + X and then click System

  

  Click on advanced system settings

  Click the Advanced tab

  Under Startup and recovery, click settings

  

  Select Windows 8 and uncheck the box "time to display list of operating systems.

• Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

  Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

  I found that the ASK toolbar is the culprit. I have no recollection of ever install Ask and wanted not just her in any case. Withdrawal fixed the problem.

• HP Workspace: What plan options are available for the HP workspace?

  Hey everybody,

  Plan options are available for the HP workspace?

  Thank you

  Bill

  HP workspace is a service of application with the application testing virtualization and delivery provided trained HP Workspace Service Desk officers lighten the load for a client by THIS group. HP workspace is available in two service options - essential and Premium.

  Essential is a great solution for organizations that have the most mobile that need to be in "desktop mode" using Windows or the Web for business applications of less than a few hours a day. Premium provides additional virtualized applications, more cloud computing power and overtime for the users who need to use applications in desktop mode more frequently. With each service, there is an integration of VPN service option (sold separately). The VPN service allows a secure access to data and databases behind the corporate firewall.

  Plan options HP workspace at a glance:

  	Essential	Premium	The Service module
  Monthly usage (per user)	40 hours	80 hours	integration of VPN 1 year
  Cloud (per user), the processing power	VCPU dedicated	VCPU dedicated	Licensure is through gateway VPN - no per user
  RAM to the virtual machine (per user)	4 GB OF RAM	8 GB RAM
  Virtualized applications	≤10	Unlimited
  The application analytics	—	Detailed usage reports
  Support	Incident and Monday to Friday deployment support[1]	Mon - Fri deployment and incident support.7

• Error: The file has properties that cannot be copied to the new location

  Hi, I have a problem when copying the files in my windows 7 PC to my Sansa clip 4 GB of sport.

  This error appears when I transfer them to any folder on my sport Clip:

  Are you sure you want to copy this file without its properties?
  The file has properties that cannot be copied to the new location.

  I can click Yes or not (when I click Yes, the file is copied to the new location)

  The reason why I ask is the following:
  The file will be somewhat different after being copied on my sport Clip?
  This is a file audio subliminal message to help me overcome some mental problems, so it would be bad if the file is modified after copying...

  The file plays perfectly and sound quality seems very good.
  However, I still need to know if the file is modified in a way?

  The device is correctly detected, but in the manual it says that when you go into my computer and click on the Sansa Clip Sports, you must click on a folder in the internal memory and then you will find a folder of music.

  But it is not at all a folder in the internal memory...

  When I click on Sansa Clip sport, I see these folders:
  Sound, music, audio books, Podcasts, playlists.
  AUDBOOK. LIB, AUDIBLE. LIB, M3U. LIB, MUSIC. LIB, PODCAST. LIB, version.sdk

  Thank you in advance, I really hope that someone will answer you

  The file properties check the metadata associated with the file.  This error occurs generally when the file was created on an NTFS volume and some of the assosiated with this file metadata is not supported on a FAT32 volume. What you mean actually is not associated with file properties, so it would not be changed.

• What developer support options are available for the development of Java for the BlackBerry Smartphone?

  What developer support options are available for the development of Java for the BlackBerry Smartphone?

  What plans are available?

  Who can I contact with to register a support plan?

  One of the evangelists 'Developer' RIM working outside South Africa, I think, so there should be someone local you can talk too.  If you message Mark Sohm (the RIM name you will see a lot on the forum - MSohm), with your e-mail address and it ask to put you in contact with the Developer Evangelist in SA, which should help.  You can tell Mark to ask me if he needs clarification.  Do not promise anything either but I hope that something will happen.

• I did not renew on time and there is no renewal options. tried to get the new subscription. could not do. I have deadlines in 6 hrs mannnn...

  I did not renew on time and there is no renewal options. tried to get the new subscription. could not do. I have deadlines in 6 hrs mannnn...

  simply contact support. They will help you. If support is not available, contact sales, as if you need assistance to purchase... .and once they get online, explain your problem, they r useful

• PhotoShop CS2 will run under the new operating system Windows 10?

  PhotoShop CS2 will run under the new operating system Windows 10?

  Photoshop cs2 should work on windows 10 or less, it's here.

  Just be aware that you will not be able to use your original photoshop cs2 that you purchased from adobe, because for photoshop cs2 activation servers have been disabled.

  If you download a version no activation of photoshop cs2 and use the serial number on the download page.

  Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  

• I have a new computer with Windows 7 Professional, Office 2007, Adobe XI. I just created a word document and tried save it in PDF format, but the PDF option does not appear in the menu dropdown. Any ideas please? Thank you.

  I have a new computer with Windows 7 Professional, Office 2007, Adobe XI. I just created a word document and tried save it in PDF format, but the PDF option does not appear in the menu dropdown. Any ideas please? Thank you.

  What is "Adobe XI" - Reader or Acrobat?

  But, "Save as Adobe PDF" is a function of Word, independent of this Adobe software, you have installed.

  

• After the system restore, drive Windows media said that there is no element in the music library. Internet Explorer Favourties tab is empty

  Original title: problems after a system restore

  Not just a system restore last night (Windows 7 OS).  And now the various little things do not work quite as it should.  For example, my windows media player said now that there is no element in the music library.  He shows me how to include files in my library, but when I do this (and my old files are still there in my music) nothing happens.

  Similarly, my favorites of the Explorer tab was empty.  I restored an older version, but the bookmarks that were under folders still will not appear in the favorties tab, even if I can see them when I look at the old version, I used to restore.

  Hello

  -For what reason were you running system restore?

  -What version of Internet Explorer is installed on the computer?

  I would suggest trying the following steps and check if it helps.

  Method 1: Launch Windows media player troubleshooting library and check.

  Open the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  Favorites may not appear in the address bar of Internet Explorer 8 after the upgrade to Windows 7

  http://support.Microsoft.com/kb/974852

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  If the steps in the Microsoft article above did not help, then follow these steps and check.

  1. Click Start
  2. Click on the computer
  3. Type %UserProfile% in the address bar
  4. Press enter on your keyboard
  5. Right click on the Favorites folder
  6. Click on Properties
  7. Click on Previous Versions
  8. Wait for the list of previous versions of load
  9. Select the version that you have lost the files/folders
  10. Click restore...

  Hope this information is helpful