Speakers do not work on Tecra S1

Similar Questions

• Speakers do not work on Tecra 9000

  I have a Tecra 9000 and the problem is that I get perfect sound using headphones, but no sound from speakers. The cd player is dismounted.

  Anyone who can help me?

  Hello

  If the headset is connected you should not hear anything. The speakers are disabled if the headphones are connected.
  But if the headphones are disconnected you should hear the sound. Please check the controller "PC speaker" in the Volume control. What you can find in the sound options.

• Satellite P100-240: speakers do not work

  I have a Satellite P100-240 with built-in speakers. Recently the speakers worked intermittently with no control over the volume (the volume was extremely low). Now the speakers do not work at all, either from a cd or a sound system.

  Can you help me?

  Hello

  You must know that in such cases is really not possible to give a precise explanation. If the audio device is installed correctly and in Device Manager is not listed as problematic there must be a problem with the settings.

  First try to check all the sound settings and make sure that the mute box is not selected. Also check dial volume control. If everything is set to max level and no MUTE is ENABLED, please check the features that you use headphones.

  Please post the results.

• Speakers do not work on my Satellite Pro U200

  Hello

  I have problem - speakers do not work.
  If I plug the headphones on making mini-jack - works perfectly.
  I have installed WinXPPro.
  Probably I need a driver, but I put t remember the name of the driver.
  Any ideas?

  Thanks for your help

  I agree with Akuma.
  If the headphone jack works it looks like a hardware problem. Maybe the internal speakers are faulty or not connected properly to the motherboard.

  The best way would be to contact an ASP. They can check your laptop and swap the internal speakers if it of necessary.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• L300 satellite speakers do not work - no audio device not detected

  I just bought a L300 and the speakers do not work.
  The computer says there is no audio device detected and when I checked it is said more far there are no drivers installed for the speakers, and I can't find a way to install them. Can anyone help?

  Can I ask you if you use the OS preinstalled Toshiba?
  The message; No audio device detected means that it sound card doesn't work.
  Why? Well, maybe the audio driver has not been installed properly?

  Please check this!

  PS: Is there any yellow exclamation point in Device Manager?

• T440p - speakers do not work

  Hi all

  Just got a new T440p today and the speakers do not work, they produce only a "popping" or a pinging all the time. The works of 3.5 mm audio output.

  I tried the things:

  • Install the latest audio drivers from Realtek and Lenovo Web site
  • Change audio mode to 'classic' in the Realtek Control Panel
  • Using the default Windows audio drivers
  • Reinstalling Windows 8.1
  • Test speakers under Ubuntu 14.10
  • Reset the BIOS Setup
  • Update the BIOS to version 2.28
  • Downgrading to BIOS to version 2.26 (note: I have curerently have installed 2.28)

  I managed to get my speakers working at the end of the day, by restarting the Windows audio service, and the fix has persisted through a reboot.

  If someone else gets the same problem:

  1. Windows key + R to bring up the Run dialog box
  2. Type "services.msc" without the quotes
  3. Locate the audio service Windows in the list
  4. Right-click-> Reboot

• My helmet is bright red, and the speakers does not work, when I try to adjust the volume when there is no headset/speakers in, there is a sign of the cross as the symbol of the volume where the places are supposed to be, macbook pro retina display

  My helmet is for some time, as the eye of the terminator, glowing and speakers have not worked since. I need to plug headphones or external speakers. Whenever I try to adjust the volume when it shows just a cross symbol under the sign of the volume, where small squares usually are (see below)

  

  Is there a way to fix this? Some other similar forums tell me to try to manually move a switch in the audio jack, but I can't seem to find such a change and the thing that seems most like a light switch, does not move.

  Can someone please help?

  Thank you

  Your audio output is stuck in optical mode, this is the red light.

  The solution is to try to insert and remove the plug a dozen times or more in the hopes of convincing making fall out of optical mode and in electric mode.

• W700 speakers do not work

  I noticed recently that my speakers do not work, but when I plug in my headphones I can hear everything. I could use some help to solve this problem, thank you!

  Well, I can't quite explain it, but my speakers work now after the multiple computer restarts. Ah, well.

• my laptop speakers do not work but my headphone works very well

  I have a laptop HP Pavilion 1d73us g6, and although my headset works fine the speakers are not. He is a recent problem.  I tried troubleshooting with the windows with no result troubleshooting tool. I checked all the audio drivers and they check fine. I tried the driver software without success. Windows Media Player does not work. I get an error message when I try to use it. What else can I try?   Carl

  Hello @hifive11,

  I read your post on how your laptop speakers do not work, but the headphones work fine, and I'd be happy to help you in this case!

  The first step that I recommend is to follow this document on the no sound on speakers (Windows 7). This should help to restore the sound from your speakers.

  You can also activate the speakers on your computer as default playback device. This is possible by following the steps below:

  1. click on the Start button

  2. click on Control Panel

  3. click hardware and sound (the icons of sort by 'category' Control Panel) and then click on its

  4. under reading, you should see one or two speaker icons. One of them should have a green check mark next to it (which will be the helmet of your laptop device). If the second speaker icon is not visible, right-click in the list of devices and select Show disabled devices

  5. a second disabled icon "speakers" should appear. Right click on this icon, then click Activate

  6. test your speakers

  If the problem persists, I recommend to you your laptop a previous restore point before the speakers stopped working. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• (hp 6530 b) my speakers do not work unless the headphone is plugged!

  I have (hp 6530 b win 7 64) I have a problem of noise from my speakers do not work unless the headphones plugged I installed upgrading the sound card and the problem still there.

  and when I keep the connected headset and restart sound works normally, but after a few minutes back

  Finally I found the solution... it's the finger printing device and I don't know what the relationship is between the fingerprint and noise problem anyway the solution is to install the latest definition of the fingerprint and I found its proper functioning !

• How is it, 5.1 surround speakers do not work with my computer?

  I decided to buy 5.1 surround speakers and I bought Logetich Z506. The problem was that I had no experience of surround sound. The front satellites and the subwoofer has worked. The Center and the pair of two rear speakers did not work. Well I am running Windows Vista Home Premium 32-Bit and my desktop is an Acer T180-ED390A(2007 model). The sound card driver that I use is Manager DD audio, Realtek and I noticed that I have 6 audio audio outputs on the back of the desktop computer. The audio outputs 6 are orange (central/subwoofer speaker), black (rear speaker), gray (speaker side), blue (line), green (front speakers out), pink (mic in). It seems that it supports 5.1, but it does not work. Can you please explain why it does not work?

  Hi JJJanu,

  You can try to update the latest version of the drivers for the Realtek sound card and try to set up the speakers again. Make sure that you get all the speakers sound or not.

  Realtek downloads

  Get high definition sound and music from your computer

  Sound cards: frequently asked questions

  Update drivers: recommended links

  Hope this information is useful.

• speakers do not work

  There is an automatic update of Windows on my computer today. Now my speakers do not work with Firefox or Chrome, but they do not work with Internet Explorer, I prefer not to use as my browser. What has happened, how can I get that back?

  Click on the link below. Enter your product number as that indicated on the Service tag on the bottom of the laptop (can be under the battery). You can also get the product number by pressing Fn + ESC key. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Download & install the latest Audio driver.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• product name: Pavilion g6-2255sx problem: speakers are not working correctly

  Sometimes I turn on the computer and the speakers do not work but after reboot they begin to function normally... when I go into the control panel and try to test the speakers a poster error that looks like this

  "This device is used by another application close all devices that are audio playback on this device and try again.

  don't know what that means

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  Kind regards

  DP - K

• S2716dg - built-in speakers do not work

  I got a new S2716dg for Christmas. It took some adjustments, but now I love it (the gamma is much too high out of the box).

  Just one problem, the built-in speakers don't work at all. I have correctly set the audio source and reinstalled the Nvidia drivers with no luck. I can plug the headphones on the monitor and hear the sound, but the speakers do not work.

  I tried to call telephone technical support, but the tag of express service for this monitor does not work if the time-out to have my abandoned call was twice as long. Is there a way I can call directly for assistance to the Canada without having to go through the routing of calls?

  See the S2716DG User Guide. The S2716DG not built in speakers.

  Audio output port side is only for headphones. OSD (On Screen Display) - Audio only adjust the headphone volume.

  

  The bottom line audio output port is for external speakers.

  

• Precision M4400 speakers do not work when it is docked

  Hello

  I have a Precision M4400.  The internal speakers work fine if the laptop is disconnected.  When I anchor the laptop, the internal speakers do not work, but I can connect external speakers to the headphone and speakers work fine.

  All the tips to get inside talking to labour moored?

  Thank you

  Matt

  Hello. I guess that your dock is a series of E? I have a Latitude E5420 sitting on an E port and the audio is delivered through internal speakers normally. The IDT audio driver is installed and speakers selected as default playback device.

  Audio is delivered through external speakers only when they are connected to the audio input jack of the laptop or the plug of the dock.

  I wonder if the socket on your dock may be faulty and the laptop originally to think that there is a plug in it when there is not one.