Specific blue screen stop error Code

Hello.

I have a Dell Inspiron 6000, running Windows XP Home edition 2000 (SP3).  I had Norton Internet Security for years, so the registry is checked every day, with some minor repairs may be needed. Didn't need to defragment (less than 1% fragmented). But!  I ran CHECKDISK just to see how things were looking and he went to 4 of the 5 steps without apparent problem.  The 5th stage (which I don't remember the name) got at least 75% full. I went to a meeting, I had to attend, and when I came back, it was the BSOD with the little bit of "IRQ_Less_Equal", AND the following: (0x0000000c, 0x000000ff, 0x00000000, 0x80532a04)

I guess that these codes specifically the point on the problem.

I can't start. When even I want F8 or F10, I gives me the ability to restart in a variety of ways, and I always choose Safe MODE, since the BEST START PREVIOUS [sic] does not work.  I choose SAFE and confirms that Windows XP Home Edition is what I have, then get a page BACK to the drivers.  You've seen these mentioned elsewhere on this site.  Things like "multi (0)" and then even if the computer is flashing like it did something, the page just sits there.  I can't use it at all.  I'm panicking because of the content on your computer being critical of my inexcusable failure to save all.  I'm not super computer, but given the specific measures, would be certainly prepared to do everything I can to get the data back, if it does not get the ' puter running (which until that I ran CHKDSK, it WAS!)  Please, if you can help, I would appreciate massively and save what I ever would have faithfully!  Thank you and hoping that...

When you choose Safe Mode, which is the last thing on your screen?

If is mup.sys and XP think that there is a chkdsk waiting, XP running chkdsk backstage and mup.sys is the last thing you see before the end of the chkdsk command.

For example (if someone wants to try)... If you schedule a chkdsk to run at the next reboot, reboot safe mode, your screen appears to be 'stuck' on mup.sys while in reality, the regular chkdsk is now running.   You can say the system is not really "hooked" because the hard drive light flashes.  Finally, the chkdsk will end, and startup continues.

Sometimes people will be complaining about their system is stuck on mup.sys when (if ask you the right questions), you will find all of a sudden, they remember that they have a chkdsk in waiting, and that is why their system appears to be hung on mup.sys.

It is not to be confused with the other times when there is no chkdsk waiting and the system seems to cling mup.sys (which isn't the real problem in this situation anyway).  In these situations where there is no chkdsk waiting and the last thing you see on the screen is mup.sys, the system is not really stuck on mup.sys - it is hanging on what comes after mup.sys (and you can understand what it is and fix it).

Depending on the size of your hard drive, what options you have chosen with chkdsk and what chkdsk finds to do, the chkdsk command can take a long time – hours, days or weeks (so says Microsoft).  Disk 1 to I, I think that chkdsk takes more than 2 hours to run even when there is nothing for her to 'do' (I don't know exactly how long, but I know I can't stand it).

So if you are "hooked" in Mode safe on mup.sys and your hard drive flashes, you should try to wait outside because XP is just doing what you said to do, which was run chkdsk.  I can't say what will happen if you get impatient and push the power or reset button while chkdsk is running...

If you want to recover your data off of an external hard drive, you can do too - do not move the hard drive to another machine and many people do not have the luxury of another machine.  You can start your system on a bootable CD, you can do (no XP media required) and simply copy your stuff to an external USB drive or a big USB key.

I would use Hiren because there a lot of troubleshooting and recovery tools built in and has the appearance of XP and are a little more respectful of the average people like me compared to the CD of Linux/Ubuntu (see instructions too many and too much work if you're not used to it).

Do, or do not. There is no test.

I decided to implement the points for a new puppy instead of a pony!

Tags: Windows

Similar Questions

  • Blue screen Stop error code 0x000000DA in XP PRO X 64. The driver's mismanagement of system PTEs.

    Seat of Windows XP PRO X 64. After you uninstall old graphics drivers, PC does not long enough to install new graphics drivers and continually, it passes loop BSoD after windows login. I disabled the effect loop so I can display the blue screen message. I read that its actually the file videoprt.sys in service pack 2. don't forget that this is the version 64-bit (located in windows/system32/drivers) who has a bug (ver 5.2.3790.3959). I did some research to get the version 5.2.3790.1830, but I can't download it to replace the current one. Does anyone have a solution for me? Currently, my PC has no graphics driver installed because of this problem.

    The minidump file showed a SYSTEM_PTE_MISUSE (da) stop error referring to the vgapnp.sys (VGA/Super VGA video driver):

    BUCKET_ID: X64_0xDA_vgapnp! VgaStartIO + 226

    The process that crashed was the SteelSeriesEngine.exe:

    Nom_processus: SteelSeriesEngi

    If the SteelSeriesEngine.exe is the process that is constantly crashing and then disable this process to start as there may be a conflict between the SteelSeriesEngine.exe and the vgapnp.sys.

    You could try renaming the SteelSeriesEngine.exe in the directory of the program SteelSeriesEngine to something like SteelSeriesEngine.old

  • HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

    HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

    Hello

    Please do not type in capital letters because it's difficult to read and considered to be shouting.

    ---------------------------------------------------------------------------------------------------

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    The system has RAID? If so, it's also very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    ----------------------------------------------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • A blue screen (Stop error) has been reported. The message contains the error details.

    Hello Hello.
    can someone help me why this error is coming.
    I use a laptop lenovo.
    Error details:
    product-windows stytem, operating
    ID-1003,
    source-system error,
    version - 5.2.
    sysmbolicname-ER_KRNLCRASH_LOG,
    error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1

    A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.

    Concerning

    Chandra Murali

    .net developer,

    HYD.

    Hi Murali,

    ·         What is the random question?

    Try the following.

    Method 1: Check for memory questions

    Microsoft Online Crash Analysis - windiag

    Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.

  • HP Pavilion dv7-2160ed - blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

    Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

    And I also noticed that some hardware is not installed to properliy:

    1 base system device:
    PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
    PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
    PCI\VEN_197B & DEV_2384 & CC_088000
    PCI\VEN_197B & DEV_2384 & CC_0880

    Device base system 2:
    PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
    PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
    PCI\VEN_197B & DEV_2382 & CC_088000
    PCI\VEN_197B & DEV_2382 & CC_0880

    3 base system device:
    PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
    PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
    PCI\VEN_197B & DEV_2383 & CC_088000
    PCI\VEN_197B & DEV_2383 & CC_0880

    unknown device 1
    ACPI\ENE0100
    * ENE0100

    unknown device 2
    ACPI\HPQ0004
    * HPQ0004

    Can someone help me with this problem?

    Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.

  • Blue screen (STOP) errors that cause Windows Vista to shut down (blue screen of death)

    I get this on a blue screen stop code and I can't find what this code means someone can help me please v

    00000101 0 x (0 x 0000000000000061, 0 x 0000000000000000, 0xffff98000c6e180, 0 x 0000000000000001

    Best advice I've seen on this error (here: http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 )
    What you are looking for will be in one of the following categories:

    (a) the BIOS bug
    (b) a pilot whose activity is at the origin of the processor target lock
    (c) a defect in hardware (temperature, voltage, dust, RFI, pure and simple borkedness...)? I also wonder about default CPU)
    Therefore, check the drivers
    Then check the inside of the species (temperature, voltage, dust, etc.).
    Then run tests of stress of material

    Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
    Try this free stress test: OSS - GIMPS

    CPU Stress Tests:
    Just do 1 or 2 tests in most circumstances. I have not used one of these tests myself, so I listed everything I could find.
    - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19182&lang=eng
    - http://7byte.com/index.php?page=hotcpu
    - http://www.7byte.com/index.php?page=burnin64
    - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
    - http://www.fossiltoys.com/cpuload.html
    - http://www.pcworld.com/downloads/file/fid, 7146-order, 1 page, 1-c, alldownloads/description.html
    - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
    - http://majorgeeks.com/CPU_Stability_Test_d215.html
    - http://www.xtremesystems.org/forums/showthread.php?t=201670
    -l' or the tests suggested at this link are bootable: http://www.techsupportforum.com/forums/f15/headless-cpu-stress-testing-393435.html#post2232929

    Then try to replace parts.
    Then look for the version of your BIOS to see what changes have been made.

    Text courtesy of http://www.carrona.org/ Usasma

  • Blue screen with error code * STOP: OX000000F4 (OX00000003, OX8A30X, 8A30F2680

    I get this error blue screen frequently on the pc, the problem occurs intermittently. There is no point. Please help me solve the problem and what is its cause. "THE PROBLEM HAS BEEN DETECTED AND WINDOWS IS SHUT DOWN TO PREVENT YOUR COMPUTER."
    A SYS OPR PROCESS A UNEXPECTEDBLY HAS EXISTED OR TERMINATED.

    STEPS-

    TECHNICAL INFORMATION

    STOP: OX000000F4
    (OX00000003, OX8A30X, 8A30F2680

    BEGINE PHYSICAL MEMORY DUMP.

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

    You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

    If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

    The procedure:

    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the copy.
    * Join ZIP archive to your message by using the button (attachments) "trombone".
    * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

    To ensure the minidumps are enabled:

    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.

    Please also run MSinfo32 and download the output as well.

    To run MSinfo32 please go to start > run > MSinfo32
    Go to 'file', 'save' and download the PDF is saved with the DMP
    (Instructions for XP, Vista, Win 7, Win 8)

  • blue screen with error code stop: 0x0000007e (0xc0000005, 0x805e492e, 0xf96793bc, 0xf96790b8)

    blue screen code error 0x0000007e

    http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e http://support.Microsoft.com/kb/330182

    http://support.Microsoft.com/kb/953356

    Or more articles in this search:
    http://support.Microsoft.com/search/default.aspx?mode=r&query=0x0000007E+XP&spid=global&catalog=LCID%3D1033&1033comm=1&Res=20

    Hope one of these AIDS. QQ learn manage!

  • Blue screen and error code: 0x0000008E (0xC0000005, 0x8243BA8D, 0xE3452BB4, 0x00000000) _

    I get the above error message and bluescreen when the computer is just sitting idle does nothing.  Usually, it's when the internet is open, but not surf.  Can someone help me understand this.  The graphics card is an Intel 82945 G express shipset family and I checked to see if it is up-to-date and the pilot said he is up to date.

    Any help?

    Hello

    Have you checked Site system manufacturer (manufacturer of custom systems motherboard), then
    Intel downloads?

    After checking the system manufacturer's Site

    Intel - Downloads - graphical value and then the other parameters as needed.
    http://Downloadcenter.Intel.com/

    ===========================================================

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    --------------------------------------------------------------------------------------------------------------

    Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
    * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens. (If necessary)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
    This would help. Such as ITC and 4 others entered at the bottom left. And another error
    information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Help blue screen Stop error

    If it received Blue error screen and auto restart past since I did the sp1 update. I have Windows Vista-32 and the error I get is:

    Stop: 0x0000008E (0xc0000005, 0x93F042F9, 0X92CD3C50, 0x00000000)

    Win32k.sys - address 93F042F9 base at 93E00000, DateStamp 4549aea2

    I need help here. I'm going nuts trying to figure this out. I would appreciate your help. Thank you.

    Hello

    Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
    You must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Make sure that all new equipment installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. Also, clear or
    remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use
    Safe mode to rename or to delete the faulty driver. If the driver is used as part of the system startup
    Mode process without failure, you must start the computer by using the Recovery Console to access to the
    file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the service from the system startup of
    using the recovery and then Console by removing the system service file incriminated.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x1E. You can disable the cache in memory of the BIOS to try
    to resolve the error. You must also run the diagnostics of equipment, in particular the scanner memory, which
    the manufacturer of the system provides. For more information about these procedures, see the owner
    Manual for your computer.

    The error that generates this message may occur after the first reboot during Windows installation or after
    The Setup is completed. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For problems during the installation of Windows that are associated with the lack of disk space,
    reduce the number of files on the disk drive hard target. Search for and delete temporary files that
    you do not have to have, the files hidden Internet, backup application files and .chk files that contain saved
    fragments of files on the disc scans. You can also use another drive to hard disk with more free space for the
    installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
    This would help. Such as ITC and 4 others entered at the bottom left. And another error
    information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
    Displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
    are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Blue screen STOP error 0 x 00000124 on Toshiba Qosmio X 300 - 13w

    Hey guys and girls.

    I need urgent help with my new Toshiba Qosmio X 300 - 13W (British model) that I bought in December
    I chose to install the 64-bit Vista Home Premium on the computer and the slopes of big thing until I HAV a work of high intensity for it as a game or to have several applications running at the same time:
    The screen goes black and the sound begins to "jerk" (repeat in a very short loop for awhile) before crashing to a Windows blue screen
    The blue screen said he "detected a unsolvable material error" and the technical Ref of the error message is "STOP 0 x 00000124 (0 x 0000000000000000, 0xFFFFFA8008FE2030, 0x00000000B2000040, 0 x 00000000000800).
    Anyone else with the X 300 - 13w has this error or someone has an idea what to do.

    Some common reasons for this problem is a hardware conflict between the graphics cards NVidia and realtek audio, but this seems to be a problem with 32 bit Vista.
    The microsoft Web site claims that it is a problem of PCI-E hotswappable with Vista but with a laptop that is not possible to phyically unless the hotswap happen somehow between the GeForce 9800 M GTS and the 9400M G during the games?

    Thank you very much in advance.

    Hello

    What's with http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=144313

    How many times you want to start new thread on the same topic?

  • Blue screen Stop error dead: 0x0000008E...

    I get the blue screen of death at random, with the error: stop: 0x0000008E, followed by a group of numbers, followed by: base win32.sys - address BF9552CA base at BF800000, Datestamp 4DE797D3... How can I fix it, and what is it?

    Thank you
    Hi Kingfisher13,
     
    -Did you of recent changes made to your computer before this problem?
     
    Follow the steps listed in this article to resolve the problem:

  • Blue screen STOP error: 0 x 00000050 [0xE4489414 0 x 00000001 0x8054BFD2 0x00000001]

    First of all, I got the blue screen error a few days ago. I left my computer and works fine while I went to school, when I got home, it rebooted and frozen to the diagnosis of the BIOS screen. I turn it off and restarted again, and before windows could load up, he got a bluescreen and restarted. Once more, he froze in the diagnosis of the BIOS screen. I didn't know what was going on, so I unplugged my computer and reset the BIOS by removing the battery, and it put it back again. Then I plugged in the computer and it starts. It loaded windows, and I logged on. Windows has worked for about 10 minutes before he got another blue screen of the same type. The screen flashed by too fast for me to read. He said something about 'Memory error'.

    I tried to restart the computer, and he hung up on the screen of the BIOS again, so I reset the BIOS again and was able to open a windows session. I thought I might have a virus, so I start Microsoft Security Essentials and started a full analysis. 5 minutes later, I got the blue screen again. After this third blue screen, nothing I tried would let me connect you. I have reset the BIOS again, tried the last known good configuration (which has worked for 3 minutes) and I tried to start in safe mode. Nothing has worked. Finally I said a few expletives, re-formated my HARD drive and reinstalled windows Xp. It worked well until everything has been done, and when everything was finally set up and running, 20 minutes later I got the blue screen again. I gave up and left the computer to sit for a day, while I thought about what to do. Last night, I turned on it and hey presto, it works again.

    It worked for about 6 hours, then I disconnected and close. This afternoon I turned it on and it worked for about 2 hours, then I got a new Blue error screen. This time, the error remained on the screen long enough for me to write:

    STOP: 0 X 00000050 [0XE4489414 0X00000001 0X8054BFD2 0X00000001]

    PAGE_FAULT_IN_NONPAGED_AREA

    He made a memory dump, and then rebooted normally. To log in again, I got this:

    System has recovered from a serious error:

    BCCode: 1000008e BCP1: C0000005 BCP2: BF8B173F BCP3: B3BE4C3C BCP4: 00000000 OSVer: 5_1_2600 SP:3_0 product: 768_1

    He asked me to send an error report, so I sent off the coast, including the info dump and system memory. So far, I've been connected for about 45 minutes now without any problems. I had previously looked up the error memory and found a bunch of answers that don't really solve my problem. I have installed new equipment last year and the 4 GB of RAM I have in my system is much more than I ever use. I looked at the papers in computer management and found only an error, but it's because after I reformatted my computer, all the previous 'memory' error logs are now gone. Looking at the logs, I also found this error which has repeated every time my computer starts:

    AMLI: ACPI BIOS is trying to create an illegal memory OpRegion, starting to address 0xaabbccdd with a length of 0 x 400. This region is located in the operating system's protected memory address range (0x100000 - 0xdfedf800). This could lead to instability of the system. For technical assistance, please contact your system provider.

    I don't know if this error is related to my other problems or not. The strange thing about all this, is that these problems only suddenly came with none of these errors that occur before about 3 days ago. I also noticed undeclared my CD-Rom has a bad block of memory. I don't know why this product is no longer, because I bought brand new CD a year ago and have any errors with it so far.

    I don't really know what is happening, but I intend to test my RAM and buy a new key if none of them produce the 'memory error' once again, but so far, the computer is running somewhat normally, which is better than nothing. Any advice you have would be great.

    Thanks for your time,

    SLIM

    Much better and you are doing very well.

    Your video driver looks good, your sound is a bit out of date (the latest from Realtek is 5.10.0.6194).

    See the Readme for Realtek from here and see that the most recent driver is 5.10.0.6194, but if it was what he usually come in BSV.

    http://www.Realtek.com./downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

    You can check your NVIDIA drivers on the NVIDIA website:

    I use the NVIDIA site and let their scanner online take a look at your video card and see what he suggests for drivers and consider their analysis if they offer a new driver.

    It is recommended to run the scan NVIDIA with Internet Explorer.

    Here is the address of the NVIDIA page:

    http://www.nvidia.com/download/Prescan.aspx?lang=en-us

    Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

    I'd do the RAM test, and since you have a genuine XP bootable installation CD, you can start it and choose to enter the Recovery Console and run chkdsk/r as follows:

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same thing you see in the Explorer folder C:\WINDOWS.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the command prompt.

    Start by checking the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    If you get a BSOD, we look deeper into the crash dump files which mean you must download this file "skydrive" share the thing they have here.  If you wish, you can go ahead and download the latest files from 5 dump for the practice.  I need practice too since I'm not a skydriver.  BSV has the information in pink in the lower pane of the form, but it is not in the general report.  Sometimes it NLY shows XP files in the upper part and there is probably nothing wrong with them.

    http://windowslive.com/online/SkyDrive

    Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • Blue screen STOP error: 0x0000007B

    Last night, I shut down my computer as usual, allowing it to update itself.  This morning I turn on only to find a formidable bluescreen message:

    A problem has been detected and Windows has shut down to prevent damage to your computer.

    If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

    Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

    Technical information:

    STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)

    I tried the safe mode, safe mode with network, safe mode with command prompt (to run a chkdsk), last good known configuration and start windows normally only to be taken to the same blue screen message over and over again.

    Please help!  Thank you.

    Hello

    What were the changes made before the issue started?
    I suggest you check the section below.
     
    Hope this information helps you.

  • Laptop keeps crashing after 3-5 minutes of availability and receive the blue screen STOP error message: 0x000000F4.

    Original title: Windows 7 Home Premium Bluescreen

    My laptop crashes after 3-5 minutes of availability and then I get a blue screen

    STOP: 0X000000F4
    I downloaded the minidump here:
    as well as a log of driverview:
    Tom

    Hi Vashem,

    The error STOP: 0x000000F4 can occur for several reasons. There are many reasons why your system may crash because of these screens to stop errors\Blue. The most common scenarios are: faulty drivers, hardware problem (especially RAM). In this case, the issue could be due to the motherboard is heated.

    Check firmware and system disk controller BIOS settings are correct and that the storage device has been correctly installed.

    Method 1: The problem is possibly due to material of unsupported disk controller. Check if BIOS (Basic Input\Output System) is set to IDE. Enter the BIOS and check the settings. Change the SATA to IDE option (if available). You can view the manual to do the same thing.

    Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

    Method 2: Disconnect any external devices from the computer except for the mouse and keyboard and check if that helps.

Maybe you are looking for

  • Helps editing of video clips in imovie

    Have an imported video but trying to edit and cut the clips that I am only able to select the full video to put down in my film, not just the clip I want to choose.  Helps editing of video clips in imovie < re-titled by host >

  • HP pavilion dv6-3141ee from home premium to ultimate

    Hello I have a computer hp dv6-3141ee laptop with windows 7 Home premium 64-bit installed on it.  my laptop has crashed and had a hard drive failure, so I took it to be fixed and my laptop to go with windows 7 ultimate 64 bit installed on this... I h

  • Satellite A300D-156 - repair under warranty?

    Please help me! My laptop is under warranty since 27/06/2009. Yesterday I brought to the after-sales service in Ukraine, Kiev, "Ivira. The problem is auto off after 10-15 minutes of work and the loud noise of the cooler (for laptop is very hot near c

  • Need help to restore the Satellite A-105

    OK, so a while ago, my Toshiba Satellite A-105 has got a massive amount if virus, usually I am on top of that, but I dropped the ball. Anyway, when I tried to use the restore disc once the computer would be loaded the Toshiba screen, reboot and repea

  • AMD SATA Controller driver for HP G62-a18SA (XC302EA #ABU)

    Hello I think to buy a copy retail Windows 7 64 - bit to do a completely new install on my laptop HP G62-a18SA (XC302EA #ABU) and so am trying to gather and record the necessary drivers, I have to reinstall later. Can someone tell me where I can down