Specifications of the system for Windows 10 technical overview?

Similar Questions

• Failure of the system for Windows 8 image backup

  I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.

  The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The mounted backup volume is inaccessible. Try the operation again. (0X8078004F)."

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The specified drive is not found. (0 X 80780081)"

  Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.

  7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
  7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MB

  Anyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.

  Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.

• get the 0x400110020000100b error code while making the recovery of the system for windows vista 32 bit.

  I tried to do a system restore on my laptop using the included recovery disks and had this error 0x400110020000100B. The drive looked pretty beaten last week so I ordered a new series. Now, when I got to put disc 2 in (to 80% full) I get the same error.  I called customer service and he took me through the process of F9, nothing works and I also tried the F11 approach that made me not the case.  I'm frustrated because I don't really have the money for a new laptop computer.

  Laptop is a HP Pavilion DV6700.

  Any help would appreciated more than you know.

  The system is Windows Vista 32 bit

  The guy on the phone said ' well, you know it's a pretty old computer... Thank you gee...

  Hello:

  See if you can make your own Vista installation disc if you can read the product key 25 character on the bottom of your laptop.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• What are the requirements of the system for Windows XP Embedded?

  Original title - XPF to the catalog

  I'm trying to find the system requirements for Windows XP Embedded and how it will be different with respect to the adding and removing of the components.

  Thank you

  Greg

  I'm trying to find the system requirements for Windows XP Embedded and how it will be different with respect to the adding and removing of the components.

  Thank you

  Greg

  Hi Greg,.

  You can test it yourself by using this evaluation version:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=17433

  See also: Windows XP Embedded System Requirements

• Update the system for Windows 7 tool - I can download it but I can not intall it and this prevents me to install all other updates.

  Someone had problems install this fix for Windows and how solve you it?

  Hello

  1. what exactly happens when you try to install the System Update Readiness Tool for Windows 7? Do you receive an error message?

  You can try to install update of the tool system by placing the computer in a clean boot state and see if it settles, as there may be interference from third-party software during installation.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Please check if you are able to install the system update readiness tool, also let us know about what error message or error code you get when windows updates.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Recommended specification of the system for WHS 2011?

  I have one of the first generations of the HP Mediasmart Home Server, and I want to upgrade to WHS 2011 when it comes out later in the year.
  Given that HP is not the hardware for WHS business, I just buy a 'normal' computer and installation of WHS 2011.
  I know that the graphics card will obviously not a problem, but someone has any suggestions on what I should look for wise card for a good experience continuous?
  Also, I have about 2 TB total in my current WHS, so I was thinking about buying another 2 TB drive, copy everything on it and then by installing the other disks in the new box for extra storage.
  Of course, calling into question, if there is enough internal connectors for additional discs (I think I have 3 internal external and 1 on my current WHS).
  Any advice would be appreciated.
  Thank you.

  It is obviously for storage of data, a hard drive fat is important. Reliable hardware is also a good thing. I would say as minimum specifications: dual core processor, 2 GB of RAM or more, 70 GB of HARD drive.

• I did a restore of the system for Windows XP and I made updates to MS. I'm stuck now. I can't upgrade to SP3 and windows update doesn't work, get 0x8024400A error

  [Error number: 0x8024400A]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Hello

  Have you made changes on the computer before this problem?

  Follow the below methods:

  Method 1:

  Follow the below the article that says how to resolve error: 0x8024400A.

  http://support.Microsoft.com/kb/836941

  Method 2:

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Hope the above information is helpful.

• Specifications of the system for indesign

  I'm upgrading to cs6 (Pr, Ps, AI,...), so I think to buy a new workstation (at work). We buy all our Lenovo PCs. I have the plug and I just wantend a second opinion on the potential performance of systems with cs6 Adobe products. We usually multitask in our workflow for some applications are almost always runing at the same time (ID, PS, lightroom, HERE...). This system manages the load?

  Data sheet:

  Lenovo ThinkCentre M92p tour

  Processor: Intel Core i7-3770 (3.4 GHz, 8 MB Cache)

  Total memory: 16 GB PC3 - 12800 1600 MHz UDIMM (2 DIMM)

  GPU: Nvidia Geforce GT 640

  1: 180 GB SSD 2.5 "SATA3 Intel HD 520
  HD 2: 1 TB 7200 RPM / MIN SATA 3.5 6 Gbps

  I wanted to go with a faster graphics card, but aperantly it is not enough space in the tower for a Nvidia htx 670.

  Please tell me what you think.

  TNX

  I think the rule of thumb for scratch disk is 4 times the size of the largest file you're working on that, but you'll have a lot of trouble to find whatever it is that little bit extra.

  My system is a little over a year now and I didn't spend the money on the SSD because I hope that people said at the time they were not really ready for prime time. I use a 300 GB SATA II drive, which is far too big of a review of the space, but it was relatively inexpensinve and extra space does not count against her. An SSD would be probably faster, but I'm not convinced that it would make a sufficient difference to justify the extra expense, unless you're a power user in Photoshop. Same goes for RAID, but if you want to hear all arguments, ask above in the Photoshop forum.

• M3800 Precision how to create the system for windows recovery disc 7 without cd player

  Precision M3800 does not come with CD player. How can I create rescue disk to restore the system or system to go back to a restore point?

  Chris Chan

  CD/DVD media is a thing of the past, you must use Dell Backup and Recovery to a 16 GB Bootable USB Flash Drive:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery-1-8-1-71/

• Wanted M6 Sleekbook: Can I get my free 10 Windows upgrade after a recovery of the system for Windows 7?

  Hi guys,.

  I have a HP Envy M6 Sleekbook. It came with Windows 7, and its warranty expired 2 years ago. I took the offer to get a free upgrade of Windows 10 a few months ago. Now, I want to exchange the hard drive out. I have a ready to run on a USB system recovery but its for the original configuration of Windows 7...

  My question:

  Is there a way I can share disks and get 10 back Windows without paying? HPO only allows you to create a system USB once recovery disk, so I can't make a new record of recovery with windows 10. When I get the factory Windows 7 running on the new hard drive, I'll be able to upgrade to Windows 10 new since I already had it and I wanted to just swap drives?  Thank you!!

  This link should help you get started: upgrade Windows 10  

  You can install Windows 7 with your recovery discs and then upgrade to Windows 10 or you can create a Windows [USB/DVD/ISO] 10 installation media and use it to make a 'clean' on the new hard drive installation.

  Notes on activation:

   

  • If you have never installed and activated Windows 10 on this computer before, you will see the activation screen. Enter your key of Windows 10 here. If you do not, but you have a valid 7, 8 or 8.1 key, enter it here instead.
  • If you have already installed and activated Windows 10 on this computer before, click on "I don't have a product key. Windows will activate automatically after installation.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Update tool of the system for Windows Vista (KB947821) [August 2010]

  There are at least 2 updates security I can't apply any key of registry, or direct download available.

  Microsoft, when you have a web page in Windows Update that says 'Additional information' provide a download that is easy to find and all subsequent web pages using the same or similar format.

  See the section "How to get help" http://support.microsoft.com/kb/2207566 or http://support.microsoft.com/kb/981957

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to fix code 8007000D that appears whenever I try to run the platform for windows vista update?

  I am trying to install the new version of MSN Messenger (2011), but to do that, I need to install first the platform update for Windows Vista and everytime I try to do, I get an error message and I can't finish.

  A program on your computer interfered with the installation

  What application anti-virus or security suite is installed and your current subscription?

  What anti-malware software can be installed.

  Just out of curiosity you use SpyBot Search and Destroy? Resident Tea Timer of Spybot is & she always enabled?

  0X8007000D ERROR_INVALID_DATA

  Description

  These data are incorrect.

  Description of the update of the system for Windows Vista tool

  http://support.Microsoft.com/kb/947821>

  0R

  Launch a collateral request for assistance free Windows Update:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527>

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  04/16 / 1107:05: 42 pm

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I need the phone number for the activation of the system preinstall windows 7 64 in the USA

  I need the phone number for the activation of the system preinstall windows 7 64 in the USA

  1-866-530-6599

  See:
  ""Activation of Windows 7: frequently asked questions".
  And:
  "How to contact a Microsoft Product Activation Center.

• Updated the operating system on the server for Windows 2012. Now I can not connect to vcenter.

  Updated the operating system on the server for Windows 2012. Now I can not connect to vcenter.

  What version of vCenter Server do you run? Only of vCenter Server 5.0 Update 2 is currently supported on Windows 2012.

  André