Spectrum 13D-3000: what format SSD does my spectrum 13D need (want to buy more large SSD)?

Similar Questions

• MacBook Pro 2010 does not recognize the (formatted) SSD

  Hello

  I saw a lot of topics on it and did some background reading. But in short, a 13 "middle MBP 2010 is simply show folder-question mark icon when starting after having inserted a 850 EVO Samsung newly formatted (option + cmd + r to try to start internet recovery mode and do a clean install of holding).

  I tried to solve problems using other my Macbook Pro (a model 15 mid-2010 ")-Exchange the SSD back between the two machines, and I get different behavior which is what is so confusing.

  The steps I have taken to date include:

  -Insert the (unformatted) SSD in 13 "MBP. Hold down cmd + option + r download icon question mark.

  -Insert the (unformatted) SSD in MBP 15 ". Hold down cmd + option + r. get starts in the recovery of the internet where I could format the drive!

  -Replace the (newly formatted) SSD in 13 ". Hold down cmd + option + r. Yet once the icon question mark.

  To make sure that I was not screw up internals I put the old hard drive back in 13 "and he started very well. It's a relief at least.

  So I'm at this stage. Someone please correct me if my reasoning is wrong...

  -He's not the SSD because my model 15 "it recognizes and plays well.

  -It has No internal features of the computer, because it always starts on the old HD when I reinserted it.

  -He could be the SATA cable. (I tried to change place than my 15 "model, but the orientation is different and I didn't take the risk of rupture of the cable).

  -It could be a PEBKAC

  In the meantime I'll install a clean version on the operating system on the new drive while it is in the MBP 15 "work. Then, I'll try once more. But I don't hold any hope as the 13 "MBP doesn't recognize the SSD when would be the model 15".

  This is the model 13 '

  Thisis the model 15 "

  Any help at all is greatly appreciated. Thanks in advance!

  You probably replace the SATA cable in the MBP 13 ".  This phenomenon has been reported several times on these forums.  An SSD will start the MBP externally but not internally, and the original HARD drive will start the MBP even internally.  A new SATA cable solved the problem.

  I do not offer a 100% guarantee, but I suspect that the chances are good.

  Ciao.

• The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

  The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

  I'm just looking to add the opening titles to the pieces of film of aprox 3 Germans, but everytime I try and save files for uploading to Youtube, then fail shortly after a minute. The sound and picture freeze while the counter continues until the end of the file.

  am driven crazy by this so any advice would be welcome...

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - see the menu on the left and others on the main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker Forums are good sources of information:

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
  http://windowslivehelp.com/product.aspx?ProductID=5

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I created a 'film' in Windows Movie Maker with audio. I'm now trying to burn on a DVD in windows DVD creation, but the program will change the order of my photos. What I am doing wrong?

  I took pictures of a Picasa folder and created a "slideshow" with audio in Windows Movie Maker. It's over, but when I try and save it to a dvd using windows DVD create, change the order of my photos are randomly. Am I missing a setting? What I am doing wrong?

  It may be interesting to try to publish (Save) project in the. Film WMV
  format in a folder on your hard drive. Then import them. WMV file in
  Creating Windows DVD.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

• What format should my files?

  before that I am committed to the purchase of this product, if I want to take a pre-existing song and break up into individual instruments so I can manipulate them (as in a remix of an existing song to store some items, but change or add others), what format should my file?  is it important?  Thanks in advance for any help you can offer me.

  richardk93343850 wrote:

  I think I might have exaggerated what I really want to do. I want essentially to take existing songs and making them flow with the same beat that underlies each of them in a scope, a trail mix of several pieces. I know I should be able to adjust the tempo/BPM so that they are consistent, too, right?

  So, if you think I'm capable of doing these two things with hearing, is there a certain file format that would be better than another?

  Yes, you can do mixdowns which do quite easily - it is just a matter of butting places them on a track and adjusting how they go through. It is Visual and intuitive to do. And yes there are tools to change the speed of tracks, although it should be a little more careful with this, that the people are often very sensitive to changes in the titles they already know. The good news is that a lot of titles that are suitable for this kind of treatment are consistent in the choice of tempos, but with all these things, experiment a little will get you quite a long way.

  As for the formula that you save the results in - it's actually not really a problem if you stick to the default values. The principle is quite simple; you mix the results down to the internal format of the hearing which is uncompressed wav files. Having done this, you can make a distribution of copy as an MP3 player if you want to. The reason to do it like that, is that whenever you create an MP3 file, you will lose information - in order to become an MP3 of an MP3 file is usually pretty bad news. And this also has implications for the way in which you build your tracks in the first place - try to not start with MP3s, but good CD imported directly or whatever. If you want to start with vinyl, then save as files wav, for exactly the same reason. Bottom line is that MP3 is a distribution format and not a production one!

• get the ora-01830, but cannot say what I'm doing wrong

  Hi, Oracle 11g R2.

  Could someone help me understand what I'm doing wrong in following select clause? I'm trying to convert the difference in seconds to hh.

  ISN.snapshot_ts and iobd.bd_handshake_ts are TIMESTAMP (6) WITH ZONE SCHEDULE

  Select to_date ((to_date (to_char (isn. )))) snapshot_ts , 'HH24:MI:SS DD/MM/YYYY'), ' MM/DD/YYYY HH24:MI:SS')

  - to_date (to_char (iobd. )) bd_handshake_ts , 'MM/DD/YYYY HH24:MI:SS'), 'MM/DD/YYYY HH24:MI:SS'))*60*60*24, 'sssss')

  Hello

  Back-and-forth conversion as

  TO_DATE (to_char)

  are almost never necessary in Oracle.  There are a lot of built-in functions and features that make everything you need more simply.

  If you subtract one TIMESTAMP on the other, the result is an INTERVAL DAY TO SECOND.

  If you view an INTERVAL DAY TO SECOND, it is formatted as

  + 00:01:10.879000 000000000

  which is what you want.  In fact, it's what you want and then some others, which can be a problem for you.  If you are certain that the difference will be less than 24 hours, you can display the number of days in the beginning, and you're neither to display fractions of a second at the end.  In this case, you can convert the INTERVAL DAY TO SECOND string and then use SUBSTR (or similar) to get exactly the parts you want.

  Try something like:

  SELECT isn.snapshot_ts - iobd.bd.handshake_ts AS diff

  ...

  If this isn't what you want (or close enough) then after a small example of data (CREATE TABLE and INSERT statements) and the accurate results you want from these sample data.

  Check out the Forum FAQ: Re: 2. How can I ask a question on the forums?

• The box transcode in prelude check when I click on it. What I am doing wrong?

  The box transcode in prelude check when I click on it. What I am doing wrong?

  Hi tijmenv,

  Prelude allows you to transcode your videos in any format supported by the Adobe Media Encoder (SOUL).

  Please install Adobe Media Encoder to your system and click on Transcode would work.

  Answer in case the problem persists.

  Thank you

  MILIN

• Can someone tell me what I'm doing wrong when you create a native extension for iPad? (Very detailed)

  My company is developing a game for iPhone and iPad using Flash cs5.5 and Air3.0

  The customer requires that certain features be supported - these things as GameCenter, rating, etc... which none are currently supported by flash for the iOS.

  However, they provide us with a bunch of xCode example files on how they want things to work.

  My idea was to bridge the gap in functionality by creating a native extension using the xcode source that was given to me, giving me the required functionality.

  But first, I need to truly CREATE a native extension, even just a base echo/hello everyone... I followed all the steps of various guides and tutorials and I have managed to create an ipa and put it on my iPad 2 to test, but when the program starts, nothing happens, I find myself with a black screen. When I comment on the lines of code that initialize the extension, it fires just fine.

  (and Yes, I even tried to put things in try blocks where there was a mistake - no luck)

  So I hope that someone can read through the process of what I do below and point out what I am doing wrong, or what Miss me.

  What I use:

  Mini Mac running OS x 10.7.2 - this is used to run xCode 4.1 build 4B 110

  PC - Windows 7 home 64 bit - running Flash CS5.5 (version 11.5.1.3469) with the 3.0 SDK inside AIR. I also have the sdk 3.0 air in a separate file for the command-line running. (This is my primary development platform)

  The PC has flash builder installed, but I've never really used it, and I don't know how to use it... everything that has been built to date has been done using Flash CS5.5

  So, here's what I did.

  The first thing we do is to create a library static .a on mac.

  I open xcode and create a new project.

  • Select iOS framework and library, then select "Cocoa touch static library.
  • Give it a name, in this case "EchoExtension" and put it in a folder.
  • I then delete the file EchoExtension.h as all the samples I've seen so far do not use.
  • I then add 'FlashRuntimeExtension.h' to the project of the AIR3.0 sdk frameworks folder on my PC
  • I remove everything in my folder ".m", and then, next to several different examples and tutorials, type the following code:

  //

  EchoExtension.m

  EchoExtension

  //

  #include "FlashRuntimeExtensions.h".

  Echo FREObject (FREContext ctx, void * funcData, uint32_t argc, {FREObject argv)

  return argv [0];

  }

  //----------- Extention intializer and finalizer ----------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ -

  A native context instance is created

  void ContextInitializer (void * extData, const uint8_t * ctxType, FREContext ctx, uint32_t * numFunctionsToTest, const FRENamedFunction * functionsToSet) {}

  Configure the number of functions in this extention

  for ease of reference, set the number of function that will use this extension.

  int FunctionCount = 1;

  set the number of function pointer reference that will use this extention.

  * numFunctionsToTest = FunctionCount;

  create an array to store all the functions that we will use.

  FRENamedFunction * func = (FRENamedFunction *) malloc (sizeof (FRENamedFunction) * FunctionCount);

  create a table for each function entry

  Func [0] .name = (const uint8_t *) "echo"; the name of the function

  Func [0] .functionData = NULL;                    the data type

  Func [0] .function = & echo;             the reference to the real function

  Save the array to a pointer.

  * functionsToSet = func;

  }

  A native context instance is deleted

  void ContextFinalizer (FREContext ctx) {}

  return;

  }

  Initialization of each extension function

  void ExtInitializer (void * extDataToSet, ctxInitializerToSet FREContextInitializer *, FREContextFinalizer * ctxFinalizerToSet) {}

  * extDataToSet = NULL;

  * ctxInitializerToSet = & ContextInitializer;

  * ctxFinalizerToSet = & ContextFinalizer;

  }

  Called when the extension is unloaded

  void ExtFinalizer (void * extData) {}

  return;

  }

  • I'll then 'product', 'building' and it creates libEchoExtension.a
  • I'm copying this .to file on my PC.

  I am now finished with this abandoned mac of God (* shudder *)
  Back on my PC, I create a folder for my test project. For all the intentions a purposes, we will call this "D:\src\EchoExtension" then I create 2 folders, one called "lib" and one called "app". Lib, it's where I'm going to create the actionscript source for my extension.

  • In my lib folder, I create a new fla in flash cs5.5, called "EchoExtension.fla".
  • I create my lib folder, the following:
    • com\extensions\EchoExtension\EchoExtension.as
    • a folder named 'Build' in which I place my libEchoExtension.a file.
  • I have in my EchoExtension.as file, place the following code:

  package com.extensions.EchoExtension

  {

  import flash.events.EventDispatcher;

  import flash.events.IEventDispatcher;

  import flash.external.ExtensionContext;

  SerializableAttribute public class EchoExtension extends EventDispatcher

  {

  protected var _extensionContext:ExtensionContext;

  /**

  * Constructor.

  */

  public void EchoExtension()

  {

  Super();

  Initialize the extension.

  _extensionContext = ExtensionContext.createExtensionContext ("com.extensions.EchoExtension", "main");

  }

  public void echo(Prompt:String):String

  {

  Return _extensionContext.call ("echo") as String;

  }

  }

  }

  • In my main fla, on the first layer of the time line, I put just the following code to make sure that did get file included when I publish the swc.

  import com.extensions.EchoExtension.EchoExtension;

  var ext:EchoExtension = new EchoExtension();

  Stop();

  • I then opened upwards from my fla publication settings, disable the swf - which I don't need, and check the swc and ensure it generates in my generation folder.  «. "/ Build/EchoExtension.swc.
  • I also updated the player Air 3.0 (which I can do because I managed integrated AIR 3.0 along side my AIR 2.6 and can build both without any problem)
  • I then publish the swc. So far so good. No problems.
  • I then made a copy of the CFC and rename it to EchoExtension.swc.zip, how I extracted the library.swf file and place it in the folder of my generation.
  • I then create extension.xml in case of generation that contains the following code:

  " < extension xmlns =" http://ns.Adobe.com/air/extension/2.5 ">

  com.extensions.EchoExtension < id > < /ID >

  < versionNumber > 1 < / versionNumber >

  <>platforms

  < platform name 'iPhone-ARMS' = >

  < applicationDeployment >

  < nativeLibrary > libEchoExtension.a < / nativeLibrary >

  < initializer > ExtInitializer < / initializer >

  < finalizer > ExtFinalizer < / finalizer >

  < / applicationDeployment >

  < / platform >

  < / platforms >

  < / extension >

  • Now, at this point, I'm a little suspicious, because I build for the iPad2... the platform is iPhone... I thought that may be a problem and at some point I have tested the same build on the iPhone4 and had the same results. I also tested using the name of the platform of the iPad-ARM and got the same results... So I don't think that's the problem, but I'm not sure.
  • Now, to make things easier, I created a batch file called "buildane.bat" in my file generation. That's what I use to create my .ane file and it contains the following command line:

  D:\SDKs\AirSDK30\bin\adt-Paquet - target ane EchoExtension.ane extension.xml - CFC EchoExtension.swc - iPhone-ARM library.swf libEchoExtension.a platform

  • I then open a command prompt and run buildane.bat and Ottoman. My donkey is created. My generation file now has the following files in it:
    • buildane.bat
    • EchoExtension.ane
    • EchoExtension.swc
    • EchoExtension.swc.zip
    • extension. XML
    • libEchoExtension.a
    • Library.swf

  Now that I have my swc, donkey and it's time to create my sample application that will be used to test my new extension.

  • I go back to my D:\src\EchoExtension folder and go to the folder app ealier, I created.
  • I then create a new flash project called EchoExtensionTester.fla
  • I open the action script settings, paths to library and add the CFC I created in my D:\src\EchoExtension\lib\build file to my project.
  • On my stage, I create a field called text txtInput, a field of dynamic text named txtEcho, and a couple of buttons called btnClear, btnRuntime and btnEcho
  • I open the first layer of the timeline, and place the following code:

  imports of base.

  import flash.desktop.NativeApplication;

  import flash.events.MouseEvent;

  import flash.text.TextField;

  import the extension of our swc.

  import com.extensions.EchoExtension.EchoExtension;

  the value of our input text to the need the softkeyboard field

  txtInput.needsSoftKeyboard = true;

  Add event handlers to our buttons.

  btnEcho.addEventListener (MouseEvent.CLICK, btnEcho_Click);

  btnClear.addEventListener (MouseEvent.CLICK, btnClear_Click);

  btnRunTime.addEventListener (MouseEvent.CLICK, btnRunTime_Click);

  create our variable expansion.

  var ext:EchoExtension;

  Try

  {

  initialize our extension of echo.

  Ext = new EchoExtension();

  } catch (error) {}

  txtEcho.text = 'Error when trying to create new EchoExtension:\n\n' + e;

  }

  Stop();

  Delete the text echo field

  function btnClear_Click(e:MouseEvent):void

  {

  txtEcho.text = "";

  }

  just to test, put the latest version of the air runtime in our text field, so we can make sure we run air 3.0

  function btnRunTime_Click(e:MouseEvent):void

  {

  txtEcho.text += "\nRuntime version =" + NativeApplication.nativeApplication.runtimeVersion; ".

  }

  call the extension, passing all that is in the text input field and get back and place it in our text echo field

  function btnEcho_Click(e:MouseEvent):void

  {

  txtEcho.text += "\n";

  Try

  {

  txtEcho.text += ext.echo (txtInput.text);

  } catch (error) {}

  txtEcho.text += "\nError call ext.echo:"+ e;»

  }

  }

  • I save the project, Open Air for the parameters of the iOS, then perform the following settings: (Yes, I know... I'll have to use adt to perform the build, but I need to first create the swf file)
    • File: EchoExtensionTester.ipa
    • AppName: EchoExtensionTester
    • Version 1.0
    • Landscape
    • Full screen on
    • Auto orientation is disabled
    • GPU rendering
    • device: iPad and iPhone
    • RES: high
    • Deployment: I use my certificate and profile provisionging that I use for my main project (that works) and defined for the test of the device.
  • I close the window and save again... but before I publish, I opened newly created "EchoExtensionTester - app.xml" which is located in my app folder.
  • I add the extensions <>< extensionID > com.extensions.EchoExtension < / extensionID > < / extensions > to the XML in the file so now it looks like this:

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  " < application xmlns =" http://ns.Adobe.com/air/application/3.0 ">

  <>Extensions

  < extensionID > com.extensions.EchoExtension < / extensionID >

  < / extensions >

  < id > EchoExtensionTester < /ID >

  < versionNumber > 1.0 < / versionNumber >

  < file_name > EchoExtensionTester < / name of the file >

  < description / >

  <!-to locate the description, use the following format for the description element. < description > < text XML: lang = "fr" > App English description goes here < / text > < text XML: lang = "fr" > French App description goes here < / text > < XML text: lang = "ja" > Japanese App description goes here < / text > < / description >->

  < name > EchoExtensionTester < / name >

  <!-to locate the name, use the following format for the name element. < name > < text XML: lang = "fr" > insert here the name App English < / text > < text XML: lang = "fr" > insert here the French App name < / text > < XML text: lang = "ja" > insert here the Japanese App name < / text > < / name >->

  < copyright / >

  < initialWindow >

  < content > EchoExtensionTester.swf < / content >

  standard < systemChrome > < / systemChrome >

  < clear > false < / transparent >

  < visible > true < / visible >

  true < fullscreen > < / full screen >

  landscape of < aspectRatio > < / aspectRatio >

  GPU < renderMode > < / renderMode >

  < maximizable > true < / maximizable >

  < minimizable > true < / minimizable >

  < resizable > true < / resizable >

  < autoOrients > false < / autoOrients >

  < / initialWindow >

  < icon / >

  < customUpdateUI > false < / customUpdateUI >

  < allowBrowserInvocation > false < / allowBrowserInvocation >

  < iPhone >

  < InfoAdditions >

  <! [CDATA [< key > UIDeviceFamily < / key > < table > < String > 1 < / string > < string > 2 < / string > < / array >]] >

  < / InfoAdditions >

  < requestedDisplayResolution > top < / requestedDisplayResolution >

  < / iPhone >

  < / application >

  • I save the changes to the xml file and return to Flash. I then publish.
  • The swf file is created as it should be, but then I get the error message:

  Error creating files.

  A native implementation extension 'com.extensions.EchoExtension' required by the application is not found for the target platform.

  • Now, while it is a pain in the rear, I again, this was going to happen because in my reading tutorials and samples, they have all said that you use adt to build the ipa... but that is fine... all I wanted anyway, was the swf, which I now have in my app folder.
  • I close flash because I no longer need and I create a new batch file: (Note: I have change the name of the cert, profile and password for this post)

  CLS

  "D:\SDKs\AirSDK30\bin\adt" - package - target the ipa-ad-hoc - stores pkcs12 - keystore "D:\src\mycert.p12" - storepass MYPASSWORD-putting into service-profile "D:\src\myprovfile.mobileprovision" "EchoExtensionTester.ipa" "EchoExtensionTester - app.xml" "EchoExtensionTester.swf" - extdir... / lib/Build

  Set dummy = p

  ECHO done

  • I then open a command window in my app folder and run build.bat.
  • I wait about 2 minutes...
  • ...
  • ...
  • YAY! My ipa file was created without error reported so far... Time to copy this bad boy to the iPad and see what happens.
  • I opened iTunes, drag "EchoExtensionTester.ipa" to the applications, then synchronize my device...
  • ...
  • YAY! iTunes installed ipa on the device... and there is a white icon bright and shiney for Echo Extension tester...
  • I open the app... and...
  • nothing.
  • I'm waiting for
  • still nothing.
  • I go to the bathroom.
  • I'll be back... still nothing... just a black screen.
  • I press the home button on the iPad, the app minimized, I restore it... nothing... black screen.

  management of human resources. Time to do some trial and error to see if I can figure out what the distribution.

  • As a test, I opened my fla and I comment out the following lines:
    • Ext = new EchoExtension();
    • txtEcho.text += ext.echo (txtInput.text);
  • I then rebuild the swf... get the same error (don't care)... I then rebuild the ipa using the batch file... and reinstall it on the device when it is made.
  • Exactly the same thing...
  • I opened the xml file... and remove the < extensionID > com.extensions.EchoExtension < / extensionID > line, save and re - run the batch file again... Wait for the ipa ends, then run it on the device.
  • I start the program on the iPad and it starts perfectly... with the exception of the commented line of code actually create and call the extension, everything works as it should. The runtime on the device reports as 3.0.0.4080
  • A test, I opened the .fla save and uncomment the 2 lines, I commented out above... keep the xml file extensionID, I re - publish the ipa... of course, this time, it actually creates the flash API, because the id of the extension is not in the xml file.
  • I put the file API with the extension in place on the ipad code... The fire and make the txtInput text and press the button of the echo. I get the following error:
    • Error calling ext.echo: TypeError: Error #1009
  • I suspect it's because I failed to include the extension in the descriptor... but when I build it with the extensionid in the xml file, I just get a black screen. I'm 99% sure that the context of the extension in the ext object is null (because that's what happens when I run Flash debug without extension lines in the xml)

  And here I am stuck.

  Can someone tell me what I am doing wrong or what I forgot to do?

  Thank you.

  Hi can check you if the CFC of the native extension is linked as external?

  Next image can help locate and change the link type of CFC.

  

  The issue that many people face here (i.e. extension works fast/interpreter mode and only when they are packed in standard mode) occurs only when the SWC of the NE is not linked externally.

  I hope this helps.

  Kind regards

  Mathyas blabla

  IOS of the AIR

• What format are these SWF? (acaddin)

  Hello

  I would like to know, what format are these swf files:

  https://na2.collaboration.adobelivecycle.com/static/screenshare/screenshareshell_player10 _ sgn.swf

  https://na2.collaboration.adobelivecycle.com/static/screenshare/screenshareshell_player9_s gn.swf

  http://na2.ConnectNow.Acrobat.com/static/shell/shell_sgn.swf

  These files are used to run in the snap-snap-in acaddin and is not possible to run in a standart FlashPlayer.

  and acaddin cannot run the standart swf files. So, how can I build a new like these?

  Kind regards.

  "acaddin" plays that Adobe signed SWFs (_sgn) is the abbreviation of "signed" so you can't build it yourself.

  It's because they interact with the operating system and we want to make sure that you can not run a malicious SWF file that could take control of your computer.

  Can you explain what you are trying to accomplish? The official SDK does not or does not work the way you would expect?

• What format is best?

  One of my friends asked me to shot some photos of her children and after doing so, I edited, converted them into JPEG and their sent email to her. She was thrilled and said that she wanted to have some expanded 8 x 10. She asked if I could burn everything to a CD or DVD so that it could bring to printing local photo for the 8 x 10. So my question is... What format I would burn it to disc, JPEG or PSD? Also what is the best for a CD or a DVD?

  Thanks in advance for any help!

  What Colin said. Resizing the canvas just will give you an empty space around your images. You should instead trim.

• What I am doing wrong? FLV not found on the server!

  I really need help please!
  
  Here is a step by step of what I've done:
  
  Created a folder on my desktop. . Mov copied to this folder. Created a new file in flash (Actionscript 3.0, CS3). Saved in the same folder on the desktop. Import video to import .mov file (progressive download, etc.). Fine imported video. I tested the movie and everything seems good. So, I have published. I checked the previews to publish and all look great!
  
  Next, I took my my dekstop folder and all it's content (.mov, .fla, .flv, .swf, skin.swf, .html and .js) and uploaded to my ftp. When I go on the website that there is no evidence and it says there was an error opening the page. Then I looked at the activity and it is said that the .flv is not found. But I checked once AGAIN and the .flv is in the same folder as the rest of my files.
  
  Am I missing a step? I am very new to Flash and I can't understand what I'm doing wrong. Can anyone help? Should I post this in another forum?
  
  Thank you!

  Check with your hosting provider to make sure that the MIME type is set to display FLV format.

  Chris Georgenes
  Adobe Community Expert
  www.Mudbubble.com
  www.keyframer.com
  www.howtocheatinflash.com

  Kirsten Vandenhouten wrote:
  > I really need help please!
  >
  > Here is a step by step of what I've done:
  >
  > Created a folder on my desktop. . Mov copied to this folder. Creates a new
  > flash (Actionscript 3.0, CS3) file. Saved in the same folder on the desktop. Used
  > Import video to import the .mov (progressive download, etc.). Imported video
  > fine. I tested the movie and everything seems good. So, I have published. I checked
  > post previews and all look great!
  >
  > For the next, I took my folder my dekstop and all it's content (.mov, .fla,
  (> .flv, .swf, skin.swf, .html and .js) and uploaded to my ftp. When I go to the
  > site nothing appears and it says there was an error opening the page. Then
  > I looked at the activity and it is said that the .flv is not found. But I checked
  > AGAIN and the .flv is in the same folder as the rest of my files.
  >
  > Am I missing a step? I am very new to Flash and I can't understand what I'm
  > hurt. Can anyone help? Should I post this in another forum?
  >
  > Thank you!
  >

• What I am doing wrong?

  I have an iMac Intel running 10.11.6 and just replaced my old iPod Touch with a new. I was able to successfully transfer a number of albums on my iPod Touch but found that most of the songs appear in gray and can be played with a wi - fi connection? What I am doing wrong? How can I access all of my music on my iPod Touch, regardless of whether or not it is connected to the wi - fi?

  In addition, to start over (assuming there is a way to access all my music without a Wi - fi), can I simply select, delete and start over?

  Again like new:

  Settings > general > reset > erase content and settings

  You must synchronize the albums/songs on your iPod touch to play without an Internet connection.

  Note: If you turn on iCloud music library, you can not use iTunes to sync music on iPod touch.

• I can't update Flash player. What I am doing wrong?

  I can't update Flash player. What I am doing wrong?

  I currently have version 21, 22 version is the latest.  I get.

  "Adobe Flash Player could not be installed."

  I did the troubleshooting steps below. Everything is good, as I can tell.

  https://helpx.Adobe.com/Flash-Player/KB/enabling-Flash-Player-Firefox.html

  My Shockwave Flash is set, 'always on '.

  I ran the Adobe flash installer which seems to be successful. Then, I tried a new facility, still no joy.  (He did remove Flash Player version 21, now I have nothing.)

  Suggestions appreciated

  Firefox could block Flash because of security concerns.

  Because of security problems in older versions, Apple has

  updated the web plugin blocking mechanism to disable all

  earlier versions of Flash Player, 22.0.0.192 and 18.0.0.360.

  Information on web blocked plug-ins will be posted to:

  http://support.Apple.com/en-us/HT202681

  The question you should ask is why you have Flash installed. You don't need Flash. If you have not installed Flash, videos will play in HTML5. If the video requires Flash, you can use Google Chrome to play.

  From Sierra, Safari will be is more said websites common plug-ins are installed. It does this by not including not information on Flash, Java, Silverlight and QuickTime

• Reset is very slow to a Mac Mini server (mid 2011) what I'm doing. 2 GHz Intel Core i7 processors and 4 GB of RAM

  Reboot and everythingis very slow a Mac mini Server (mid 2011) what I'm doing. 2 GHz Intel Core i7 processors and 4 GB of RAM. Using OS X El Capitan

  What do you mean by slow?

  When slowing down

  Run and view the results here so that we know more about your configuration.

  http://etrecheck.com/

  EtreCheck

• I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  Hello

  If you have not already done so, it could be that you want to configure your watch with these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.

  -On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).

  -Also on the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a