Spectrum 14-3100-Windows 7 64 bit - HP on missing screen and quick start driver.

Similar Questions

• Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive.

  Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive. Each screen is blurred during the installation. Managed to get

  It is installed. A great until I had to reboot after the installation of windows updates. It starts with the first good looking for Windows 8 logo then

  the monitor turns off and the computer is still running. Reset and I get the windows repair screen. Sometimes, his clear and sometimes

  its blur. I have a motherboard Asus M2N with a Nvidia geforce GT 240 video card. I'm guessing that the windows install 8 pro and pre of initialization

  use some funky video drivers before windows loads the correct nvidia drivers. Microsoft needs to do a better install disc that allows to display the

  graphics correctly. Windows8-UpgradeAssistan does not really check very good material. I ran the windows 8 developer preview and it

  had no problem. Y at - it a hope?

  Hi SteveSimmons,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I suggest you install the latest drivers from Nvidia geforce GT 240 for Windows 8 from the link below video card:

  http://www.nvidia.com/download/index.aspx?lang=en-us&ptid=1&PSID=52&PID=0

  I hope that the information above helps you.

• I can't able to install windows 7 64 bit in a GPT partition... the drive is already formatted and now I'm on win 7 installation screen

  I can't able to install windows 7 64 bit in a GPT partition... the drive is already formatted and now I'm on win 7 installation screen

  Mehdi FranklinPackya,

  If an operating system from a disk GPT, whether it is installed or not, the extended BIOS Firmware Interface (UEFI) is not only recommended his need.

  The following links may be of some use:

  Install Windows 7 on computer based UEFI

  Windows cannot be installed to this disk. The selected disk is the GPT partition style

  All the best,

  James

• Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

  Victorinox original title: Black scree & blue screen...

  So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

  Hello

  · What is the error code or error message that you receive when the computer starts in safe mode?

  · Were there any changes made on the computer before the show?

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  Try the methods below:

  Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

  Method 2:

  Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 3:

  You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• How change the size of the window on firefox so do not whole screen and have empty spaces on the sides of the window

  My cat stepped on my laptop and my window size now takes up the entire screen, and there are a bunch of empty room on the sides of the window. How can I fix it to fit the window to the web page of GI on?

  Try to press the "F11" key on your keyboard (Note: some portable computers require that you hold a "Fn" key to press F11).

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  It could be the browser problem because the site is up and running, could you please try another browser.

  If same thing happening there so kindly go to Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release. ProDesignTools and download the desktop here CC application.

  Note: Please follow the instructions very Important, otherwise the download does not start.

  -Pierre

• dc7800 sff windows 7 32-bit clean install - a required CD/DVD device driver is missing.

  Hard to install Windows 7 32 bit on my desktop DC7800 SFF pc

  white screen - fixed (updated bios using back win98 & USB flash drive prep utility)

  installation white screen set (stopped using the dvd usb player & utilisΘ local DVD drive)

  Image DVD transferred to USB flash drive (always get this request)

  Downloaded and tried many drivers of different sites...

  Drivers, Software & Firmware for HP Compaq dc7800 Small Form Factor PC

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Intel ICH9 Chipset Driver for Microsoft Windows 7 - sp46869.exe

  It seems that nothing I try does not work.

  (always get this request for drivers)

  It has been a very long and tedious struggle day. I'm very tired and don't know where to look next to find answers...

  Any help this dispute would be really appreciated thanks.

  Well everything is solved and works well.

  Typing this from the newly built Office.

  Any Solution used (thanks to Paul Tikkanen to put me on the right track)

  (01)

  Update BIOS to fix a blank (black) screen during windows 7 Pro (32 bit) install on a hard drive (new & empty).

  Dc7800 SFF - Windows 7 drivers

  Update of firmware for HP 786F BIOS of computers with Intel processors families
  sp51245.exe

  I couldn't get this utility bootable CD version to work so had to turn to a USB bootable flash instead.

  Prepared the botable USB using - key USB W98 back Starter Kit

  (02)

  Downloaded the ISO from Microsoft file

  Windows 7 Professional with SP1 (32-bit)

  SW_DVD5_Win_Pro_7w_SP1_32BIT_English_-2_MLF_X17-59276. ISO
  Real Corsair Flash drive size - 2 377 506 KB - in windows Explorer
  Size: 2.26 GB - 2,434,566,144 bytes
  Size on disk: 2.26 GB - 2,434,596,864 bytes

  The file ISO of Windows 7 original instalation was certainly smaller that it should have been!

  (03)

  Burn the ISO on a 4.0 GB Corsair Flash drive using USB W7 Starter Kit

  New image details - Corsair 4 GB Flash Drive
  Size: 2.28 GB - 2,452,486,680 bytes
  Size on disk: 2.28 GB - 2,454,302,720 bytes
  873 files
  200 files

  (04)

  The installation went very well with only 2 issues of device driver initially...

  PCI Simple Communication controller
  Driver - Chipset
         Customer Manager Active Intel HECI Device Driver
  sp46137.exe
  PCI serial port
  Software - system management
          Intel AMT AMT 3.0 LMS_SOL
  sp46134.exe

  (05)

  I run one - SAPPHIRE HD 5450 1 GB DDR3 PCIE HDMI - Twin (DVI & VGA) graphics card

  First configuration - downloaded the drivers from the manufacturers Web site.

  On the installation of what I thought was the at and the latest driver, 2 problems...

  1 - the installation says that I needed .net Dot 4

  Downloaded and installed - Microsoft .NET Framework 4 (stand-alone Setup program)

  2 - the second test video driver installation is finished - but - screens flickered and flashed like crazy.

  I did correct anything that.

  Wiped the hard drive and run through the steps above.

  This time, making sure to use the original cd that came with the card of 2011. Result!

  PS - In the first leg through after installing windows successfully, I did all the updates of Windows 7.

  It took hours to download and install.

  Second time, I did not bother with the Windows updates immediately.

  Next step-

  3 future issues to be covered in the following threads

  (a) preparation of the utility of the technology Intel Management Acive - entirely private or disabled.

  (Do not need or want but hate having outstanding pilot flags in Device Manager).

  (b) the image of the hard drive and train you to restore boot partitions for multiboot Windows 7 installation.

  (c) work on a quick way to landslide-live stream the latest windows updates in the installation.

  Thanks for the help and I hope that some info above is useful.

  Advice on the high road (preferably free) partition SW of imagery to manage encrypted data of the partitions would be a good thing.

  Next thread?

• Is - this Windows 2003 64-bit supports the USB WD My Passport HIS drive?

  I bought a WD 2 TB my drive USB of HIS passport and tried to connect to a windows 2003 64-bit server, but the drive does not appear in the list of local drive. I checked in the computer management > Device Manager > ComputerName > discs and found that there is a driver for device usb WD My Passport 0748.

  I conect the usb WD drive in my windows XP machine and copy the driver ITS \\Extras\WD device driver folder and transferred to local drive of the windows 2003 server and I tried to update the driver but the driver update failed and telling me that there are no compatible driver in the source folder.

  Here are the contents of the folder:

  wdcsam - security catalog

  wdcsam - information for installation

  wdcsam - file system

  wdcsam64 - file system

  I tried to search the site Web of WD for the compatible driver 64 bits, but, according to the Internet, the USB doesn't have a driver for windows because its use of the microsoft driver. Below are the links related to the topic of Microsoft and WD which, in my case, does not contribute to the problem.

  http://wdc.custhelp.com/app/answers/detail/search/1/A_ID/5419

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-book-WD-SES-device-USB-doesn ' t-have-a-driver/d5a255c7-545c-45f4-9e15-8528384daa80

  Is there someone out there have solution for this?

  Thank you

  Hayet

  Hello

  After finding the solution I posted it on this site.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/thread/61950e4d-4C45-4108-8535-4b364f3d6056

  Thank you

  Hayet

• My HP Pavilion dv6 on occasions stops to avoid overheating. My OS is windows 7 (64-bit), I cleaned the vents and the fan. How can I check cooling fan is working correctly

  My laptop HP Pavilion dv6 shutsdown to avoid overheating. My OS is windows 7 (64-bit). I cleaned the vents and cooling fan, but I continue to have problems with closing to avoid overheating.

  Is there a test I can perform to verify that the cooling fan is working properly. All of the suggestions. Thank you

  You can use speedfan http://www.almico.com/speedfan.php

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• Windows vista 64-bit crashing into the screen blue and often impossible to reboot after crash

  My windows crashes constantly everytime I try to watch a video or go to a page with java, if I try to install the new version of Adobe, it stops it's self down and do not restart, just it becomes black and stops.  I pay for membership to netflix and I can't even watch a movie. I go on youtube it crashes, I'm trying to play farmville on facebook, he crshes... in a blue screen and this is what I get when I start it again:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8006F77030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini071911-04.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-85098-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WER26A2.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  July 20, 2011 Crash, 6 times

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA80070B6030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini072011-01.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-144456-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WEREBE4.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  July 21, 2011 breaks down, 4 times

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8007066030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini072111-03.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  July 22, 2011 crashed 7 times

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8007066030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini072111-03.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Many many people have this problem when I talk to others. Miscrosoft compromises our computers so we would have to buy new ones?
  They know there is a problem and they don't even try to find a solution for this. In this economy, they force people to buy new computers, they will just leave people blocked company becase NOBODY takes the phone, if you do not have email, people don't keep in touch, if you are not on a social network or business networking nobody will know your business, you won't make any money nobody reads the ACTUAL newspapers these days, everybody reads the news on the internet. They only hurt people, they are forcing anyone to buy a new computer, people just can't afford it. Hundreds of thousands of people can barely keep their utilities on. In doing so I wish they will reconsider. I am disabled I will definitely cut if my computer goes down for good.

  Can we do any smell that?

  There are also a lot that I need to run startup until the restoration. Windows restarts after the crash of the blue screen, I reinstalled windows twice, it works fine until I have start to install all updates. I have only installed MSE and it still happens. I lost all my music I paid a lot of money for, my paintings for children, important documents, all because I had to reinstall windows twice now.  I may have to reinstall them once more and I do NOT wish to install the updates again. He really never stops until I installed updates to windows. I thought that if I use the programs from Microsoft that it will work, because after all, it's all done by the same company, but no, nothing works. I am so in the sincere real despair. Be alone without technical skills, hardly what actually on my disability check, now I'm going to cut everyone. Now I can't do ANYTHING without it crashing, nothing fun anyway. I tried Microsoft fix, I tried so many solutions. I paid for Adobe photoshop, because I like to draw things and I'm terrified to install it. I'm afraid to do anything fun or useful on this computer.

  If I can afford a new computer at any time, I think I will try Apple, I lost my trust in Windows. Unless they make an effort to solve this problem, then I would give them a chance again, but not if they will try to help. I'm so frustrated. I spend a lot of money on this computer, it's an ENTERTAINMENT laptop and I get not very amused.

  What is going on?

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Heat associated
  does not necessarily mean excessive heat, it could be something is too sensitive to the same
  normal levels of heat. Also a computer will produce more heat as is pointed out how adding
  software or updates, among other measures, causes it. Of course those actions should not
  cause enough stress or heat to shut down the computer.

  For a laptop on everything that you can do is reinstall the memory and clean the ventilation openings (still may try to add
  a small fan as a test). Of course first remove all power.

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  BCCode: 124 0 x 00000124

  This is usually heat related, faulty hardware, memory, or processor even if it is
  "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
  and cables (at both ends) - actually delete and replace - are not just tight. Ensure
  the system has proper ventilation - add a small fan blowing in the contributions. Carefully
  Inspect the card mother and other cards for damage. Pay attention to the fatal material
  error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or system manufacturer support.

  There has been a few cases where Norton/Symantec and other antivirus/security
  programs have caused this error.

  BCCode: 124 0 x 00000124

  Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
  verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
  data provided by the error Architecture WHEA (Windows Hardware).

  0 x 00000124<-- read="" this="">
  * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 64-bit Adobe Reader 9.3 and IE8 - opening PDF in the tab and then says closing tab causes IE8

  I've been running Win7 64 bit for quite awhile now and only up to what a few weeksa go started having problems with Adobe Reader continues to ask me how I wanted to read a document and click here to save the settings, and don't ask me again.  The box has never worked and it will continue to ask me questions constantly everytime I open a new PDF file.

  I finally understood how to get rid of the nagging dialog box but now everytime I open a new tab with a PDF file in it and then close the tab, IE8 crashes and tries to pick up the tab.  It's never happened before.

  What is the cause and how to fix this?  Please notify.

  Upgrade to 9.3 this morning and the problem remains.  Tried to uninstall all traces of Adobe Reader and reinstall but still no dice.

  Problem happens also to home on a similar computer running Win 7 64 bit and use an earlier version of Acrobat and Adobe Reader.

  Try this:

  Right-click on the IE8 icon in the taskbar. A menu pop ups upward. Right click again on 'Internet Explorer'. Then left click on "Run as Administrator". I had another problem with the drive and this has solved the problem. The problem I had was that I couldn't save PDFs in IE8. This solves this problem.

• I start my computer, a white window appears in the middle of the screen and I can't remove it.

  Every day when I start my computer, what a white window pops up in the middle of the screen and I can't remove it.please can anyone help.

  Cannycarol

  Hello, Carolyn,

  Windows operating system?  Windows XP, Windows Vista, Windows 7?

  Are you capable to perform a scan for malware?  Download the tool from this link and run a full scan

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  You are able to surf, read email, etc.?

  Is there a message "year Unknown Error Has Occurred."

  You are able to go into the event viewer and look for errors - the impossible event ID

  You may have to reinstall Windows

• Windows 8 does not not to the Welcome screen and the start option advanced

  I met a very strange situation.

  1. I first put my system into hibernation and walked away for a while. Then when I tried to turn on the system, it freezes at the Welcome screen. I tried the strok key (Ctrl + Alt + Delete) but nothing happened. I noticed that the ' FN ' on my laptop works very well! I could turn on and turn off the Wifi with them. But the system has not responded to all other keys and my touch pad.

  2. I tried waiting for the system to respond for a long time. When I noticed that the little light on my laptop showing the status of the HDD stopped flashing, I thought that the system could already went wrong so I hard reboot the system.

  3 then, strange thing that happened:

  (1) first is the logo of my BIOS flashed on the screen and disappeared, which has never happened before.

  (2) then the system told me that he prepares the update. But I remember turning off the automatic update and I had not installed update before the system went wrong. Although I remembered that there is a warning to the login screen that there is some new important updates and I should install them.

  (3) the system is restarted automatically when the increase is 30%. After this reboot, the system maintains hang at as before welcome screen.

  4. I've tried several things and hard reset for many times but nothing has changed.

  (1) I tried to disable the quick start to the BIOS.

  (2) I've tried allowing CSM (disable UEFI in legacy mode)

  (3) I tried to press F9 to start and got into the advanced boot options screen. However, all there hang two! My keyboard and mouse are both inadmissible.

  (4) disconnect all connected to my laptop.

  Then I'm lost. I can't repair or restore my system. I think that my keyboard works fine because I can change the BIOS setting to use. Now, I'm at my wits end with. Can anyone suggest anything?

  Update:

  Turned history that I tried to plug my USB mouse to the laptop. It worked, and when I connect my USB keyboard that works too! But minutes after I logged on successfully to Windows, I got the WORKER_INVALID and restart the system.

  I found this post which has almost exactly the same problem with me (I use an ASUS laptop too!). So I uninstalled my driver warned of the gesture, and then the system has not crashed over.

  But my problem has not been resolved. I downloaded and installed the latest driver of ASUS and always found my touch pad and the keyboard does not. I also realize that even in a different operating system on my system (LinuxMint), my touchpad and keyboard will not work.

  To summarize:

  Now I can use an external device (USB keyboard and mouse). But the built in keyboard and touch pad does not work. The latest driver for ASUS (ASUS Smart gesture) and ASUS ATK Package driver does not work. Strange thing is that when I open the computer, can I use my keyboard and even type in the Linux grub shell. But once the system got loaded, both in Windows and LinuxMint, the keyboard and the touchpad don't work.

  Now, I suspect my BIOS went wrong, but I do not know and do not dare update the BIOS so recklessly. Any ideas?

  Hello

  Thank you for the update on the question and good to hear that your problem is solved and everything works well after the replacement of the motherboard from ASUS. This information will help other members of the community to the same question.

  Feel free to post on the forum if you have any concerns more associated with Windows. We will be happy to help you.

  Kind regards

• 20.0A1 nightly of Firefox on Windows 8 64-bit subway tile missing.

  OS: Windows 8 Pro RTM 64-bit;
  Firefox Edition: 20.0a1 night 64-bit (no later than December 16, 2012)
  Download address:http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/latest-mozilla-central/firefox-20.0a1.en-US.win64-x86_64.installer.exe
  Problem: I did every night as my default browser, but Firefox tile does not appear in the metropolitan area. I can only launch desktop edition.

  This is because the ordinary channel central Nightly builds is only the version of office.

  You need a generation that has Metro support.

  http://ftp.mozilla.org/pub/mozilla.org/Firefox/Nightly/latest-Elm/Firefox-20.0a1.en-US.Win64-x86_64.installer.exe

  There is this running thread at mozillaZine on Metro builds.
  http://forums.mozillazine.org/viewtopic.php?f=23 & t = 2304983