Spectrum 360: Cable ethernet for spectrum 360 connection?
Nobody knows what the best approach for wired ethernet is on these laptops? I did not know that they do not have an ethernet jack, my son is off to College with a spectrum of 360. Looks like they recommend an adapter, but I don't know if it's via the HDMI or USB? And then, what size is the USB?
Any help would be appreciated!
USB 3.0 and USB 2.0 are the same size and are backward compatible.
USB 3.0 ports are blue or have at least the symbol (super speed)
I scoured these forums looking for a solution to my problem, but nothing I've met has worked so far.
I have a TC of 2 TB. I'm sure, it is considered as 2nd generation to 99%. My Mac is a 21.5 mid-2011 "El Capitan running.
What I'm trying to do is (should be) pretty simple, but I just cannot get this to work. I live in the glue, so internet high speed cable is not available and I'm stuck with Verizon DSL via the telephone line. Go ahead... Take minute for model / to feel sorry for me... I'll wait. OK, so I have this DSL modem/router from Verizon Wireless and my TC does not seem to play well with it, when I joined the network. Internet continues in and out and wireless file transfer is so slow. So I would just remove my TC of the network, disable the wifi signal that he died, and connect to my Mac via the ethernet cable and use it strictly as an external hard drive for my media files. Any help on how to do this would be appreciated.
Go ahead... Take minute for model / to feel sorry for me
I live in important suburb of Melbourne in Australia and count myself "LUCKY" to get DSL to about 6 Mbps, then you are the global average, I guess for internet.
(Of course we have a Conservative Government... think Republican or Tory... whose the idea of fast internet is something from the years 1990) A conservative, he also seems = backward.
I have a TC of 2 TB. I'm 99% sure, it is considered as 2nd generation
It's really unlikely... they sold a handful.
Look on the bottom... paper A1409 label is gen4, molded into the first line of rubber... Gen3 is A1355... A1302 is Gen2 and extremely likely.
So I would just remove my TC of the network, disable the wifi signal that he died, and connect to my Mac via the ethernet cable and use it strictly as an external hard drive for my media files.
You can do this... * If you? *
The method is here.
It is a bit tricky because of the gateway and DNS issues.
If you need more details give me a screenshot of your network on the Mac wireless connection.
* If you *.
A self powered 2 TB 2.5 "disk connected to the back of your Mac. will be invisible... it will be faster and much more reliable than the old TC.
It will allow your local files not network... and therefore the time Machine will work... Time Machine backup impossible of network drives. It can use as the target source ever.
Thanks for posting on the Microsoft answers Forum. According to the website of Sony PS3 "file transfers directly between a networked PC and PS3 system are not possible.' http://PlayStation.custhelp.com/cgi-bin/PlayStation.cfg/php/enduser/std_adp.php?p_faqid=1521&p_sid=GK6c1LJj
If your PC does not see the PS3 it could appear as an unknown device and you would not be able to access.
I think that this is a security feature of the PS3 to help prevent being hacked. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
I have the HP Laserjet 4100 printer. I bought a new laptop with USB ports. What type of printer cable I need to connect the printer to my laptop? Is there some kind of printer cable adapter, or something else that will do the trick?
I have the same question about my HP Laserjet 1100 printer.
Thanks in advance for your assistance expected.
If I remember correctly, the 1100 uses a cable "C", alias MicroCentronics. Have never seen an adapter for that one. On the 4100, you can get a USB to parallel adapter. They are pretty cheap and available at most CESS (Consumer Electronics Super Store) as Best Buy. Staples and OfficeMax/Office Depot should also wear. Online is cheaper if you have time to wait.
The thing with these USB converters is often must 'install' the cable first. In other words, connect it to the laptop, then wait so he could install, then connect the printer. Depending on your operating system and if you have correct updates that can be almost instantaneous, and you may not even see it pop on the screen.
Best idea is that since these are obviously not portable machines, connect them to your router via a network card. I had the 1100 years and used a cheap 170 X. I know most recent are available which are faster.
For the 4100, see if you can retrieve a Jet Direct 620 unit on eBay. Probably less than $50 and sometimes even as little as $25. Stay away from the 600, 510 or 615 cards. Low or as the 600, they can leave your network open to hackers. No need to get Gigabit cards as they will be well above what the 4100 can handle.
Now, two of these old devices, processing power and memory can be a problem. Never try to print documents online. Save them on your laptop, and then print. You will probably get communication errors if you print directly from IE or FireFox.
If the 1100 does not die, not even worth fixing. Put into a Fuser is a nightmare. The 4100 will probably work for another 20 years if you keep to clean and replace the rolls before they cause jams.
A standard ethernet cable will work?
Is there a favorite type or brand to use to get the maximum benefits.
A standard ethernet cable will work.
I just upgraded to Firefox 17 and found that Norton 360 "Connection Wizard" (officially named Identity Safe) no longer works. He does not fill in the username and password fields. It worked great and did all the right things when I was using Firefox 16. There is probably a miracle solution, but in the meantime, I had to go back to version 16. Impatience the problem is resolved.
Original title:-wired controller Xbox 360 connects to Windows 7
Hey, I recently bought a controller wired xbox 360. And it does not connect to my PC. When I try to connect it says device not recognized USB. And in Device Manager it says it is an unknown device and that "Windows has stopped this device because it has reported problems. (Code 43) "I downloaded the driver from the software http://www.microsoft.com/hardware/en-us/downloads here and I also downloaded the MotioninJoy as an emulator, but the xbox 360 controller does not always connect." Is there a way to fix this?
1. did you of recent changes to the system before the show?
2. do you have the receiver for the device to the XBOX?
Method 1: Troubleshoot your XBOX controller.
Follow the steps in troubleshooting from the link below and check if it helps.
(a) click Start.
(b) access Control Panel, click on System.
(c) click on hardware, click Device Manager.
(d) open Device Manager and expand the devices with error code 43.
(e) right click on the device and Uninstall the device.
(f) restart the computer.
Check to see if that fixes the problem.
If the problem persists, I suggest that you follow the XBOX support link below for assistance.
In addition, check out the link below and check if it helps.
It will be useful.
Soon I'll have a new Mac Book Pro, and I would try Migration Wizard but > > > > when connecting two books of Mac with Migration Wizard should I use a cable Ethernet 'right' or 'twisted '?
You can use either; There is no advantage to one or the other specific.
where can I find a coaxial cable to the adapter cable ethernet to my Airport - have time warner line coming into the House but need to ethernet adapter to use the airport for router and modem
Unfortunately, a co - ax for Ethernet card will not help you.
The reason is that the Apple AirPort routers do not have a modem on board, you therefore need an external modem separated if you want the airport to be able to provide Internet access to clients connected.
Co - ax cable connects the modem. Then he use an Ethernet cable to connect the modem to the "O" WAN port on the router from the airport.
Check with Time Warner for recommended modems that are compatible with their service.
My workplace has cable/Ethernet and Wi - Fi. I'm working on a laptop, plug it into a dock where my ethernet cable is connected. Lately, I've been the startup object and the network will connect automatically (by default to connect to the local network, not for the wireless) but I get the point of the triangle/yellow exclamation on my network icon and displays "no Internet access. Even if I get this warning message /, in fact, I can access the internet, but I can't access resources online through a program installed (such as, to access to the / insertion of a photo online by word or update a SharePoint Outlook calendar).
In the past, I could connect wirelessly and work around this problem. However, now my wireless connection does the same thing: it will connect, it displays the warning "no access Internet, I can access the internet, but not another program."
I ran the resolution of problems and it does not identify the problem. I've updated drivers, disconnected and reconnected networks - nothing seems to work. Any ideas?
Given that you encounter this work to your work network you really need to get your business COMPUTER Department to come and watch. As far as we know, there may be certain restrictions checked in your network permissions that must not checked. There is so much that can happen it is impossible to diagnose on an online forum.
I change the cable/connector for * power switch button * which connect to motherborad. If anyone no where I can get in? I tried at PC world, but they do not have cable, I am looking.
My laptop SPAC:
Satellite A100-033 part number: PSAANE-03J02GEN
I can t tell you the part number because I m not the owner of the Satellite A100, but a service provider authorized in your country can do this:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider
Just give them a call and ask. Maybe they can send you the replacement part. :)
I use a motor driver stepper MID-7604. I want to reduce the ground loop noise in the system that I'm able on my PXI-5152 (through a series of sensors, etc.) using an optical isolator or transformer for cable VHDCI 68 pin that connects the engine to the computer. Such a thing exist, or are there other methods to mitigate the noise? I'd rather have the computer connected to the same circuit and the MID-7604 / I don't really want to buy a gigantic isolation transformer/surge protector to plug into the MID-7604.
PXI to the ground connection should be fine, so everything is referenced to the Earth.
And Yes, grounding of the table is a good idea as well.
I have Windows Vista, IE 8 and labtop HP Pavilion. I had just recently Cricket Wireless Broadband, with a USB wireless modem. I now have the Charter/Comcast broadband through my cable. The modem is connected to my PC via the Ethernet port. On the connection icon on the toolbar on the right down, it shows that I am connected. The "Local Area Connection Status" in the network and sharing Center seems to be connected, since bytes are sent and received.
However, when I'm on IE8, it acts as if there is no connection. Not being able to view the web page. Also, now when I go to a local WiFi hotspot, I can't connect to a network, just as I always, and it shows that there is a link, however, it won't let me access the internet. It used to work, before everything first, I connected the cable modem.
Any ideas? Thank you!!
If the Cricket connection works correctly but your cable connection is not, which suggests the computer is set up correctly and the problem is with the cable connection. All other systems are able to connect through the connection of the Charter? If this isn't the case, please contact Charter and see if they are able to determine the issue on their end or help you reconfigure the modem.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Both ethernet and Wi - Fi connection has stopped working. When has stopped working wireless, disabled the wireless card and connected the laptop to the network with the Ethernet port. Same problem, cannot access network. Market Diagnostics I get the message that indicates that the test has been able to network ping, but received no response. When I try to ping the router I have 100% failure. Other computers on the network are still working and able to connect to the internet. The currency displays Manager Ethernet card and WiFi card works properly.
Don't know what I had, but it was pretty nasty. Did a restore of the system for a few weeks back, and when it restarted everything worked.
I can connect my LAN cable to my computer and the computer will detect and indicate that it is there.
The problem is that none of the software on the computer seems to see that there is a link. Internet connection screen says that the LAN cable is a schooner of connection. I tried everthing I know so he can work with no sucsess.
PS. I use Vista and I know little about it Vista.
First check to see if the network card is recognized and if the LAN driver has been installed correctly.
It is the as-installed LAN card properly then you should check the settings of the network adapter's TCP/IP protocol.
The properties of TCP/IP all the settings such as IP address, gateway, DNS must be set to automatically get
Also please check if a firewall, antivirus, etc apps don't lock access to the local network.
Maybe you are looking for
Firefox has become very slow to load. After about four minutes, the Firefox image for a Web page is displayed. Finally, the screen for my home page (Bing) fills the screen. I get the following error message: "WARNING: unresponsive script: a script on
The mobile application used in Coursesmart ignores the pages to the library offline that stores in the cache of the browser. The first five or six pages are beautiful, and then I just get the framework. I don't know if there is a problem with courses
I have a HP Officejet 7110 working never quite right. It is on a mac network and I couldn't get wireless printing to work, so it is snagged by ethernet in the hub/modem. It was disconnected and no matter what I do to restart / reboot my mac, it won't
Is there a 1215 PhotoSmart Printer Driver for Windows 7 OS
HelloI need a script will take a map of VM network by mac address (for VM with multiple network cards) and change the network labelThank youItay