Spectrum 360 HP: HP spectrum 360 clikpad

I try to remove the use of the option to zoom on my Hp spectrum X 360 clickpad

It works but when I close my laptop, the zoom option always come back.  Is this normal?

Thank you

Hello

Try the following.

Hold down the Windows key and press R

In the run box, type regedit and press enter

In the registry editor, navigate to the following

HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

Inside, look for a key named DeleteUserSettingsOnUpgrade

If it is present, right click on the key and select Edit

Set the field data of the value 0 (zero) , and then click Ok.

Close the registry editor.

Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Spectrum x 360: bios boot menu and boot times

    Serial number (deleted content) product number T1D62EA #ABU

    I'm a bit disappointed by the time which takes about 25 seconds to start. The main delay seems to be the time taken before the HP logo appears. It takes about 5 or 6 seconds until appear a message "press the esc key to access the boot menu", and then another a few seconds before the HP logo. After that, it is very fast.

    Is it possible to start directly on the HP logo?

    Before buying this laptop I buy one from Microsoft Store (decided to change because of the largest SSD hard drive) and this book started in 1.1 seconds. I believe it was a Signature Edition of the spectrum x 360 and there was apparently no bloatware, although I don't know if this affects startup time.

    @bigals55ajr

    Thank you for the update,

    As you mentioned on the various changes that you have made,
    I was wondering if the problem is now solved, and if there is anything else I can help you.

    Keep me posted,

    Kind regards

  • 13D - 4000 x 360 spectrum: spectrum HP x 360 will not load or start

    Last week my spectrum of x 360 battery is discharged and it prompted me to plug into the charge. I plugged in and the laptop was not charging. I tested the plug and inspected the charger/port to see if there is damage.  Everything is in perfect condition, or the cell phone or the charger have been abandoned or damaged. Called HP support and the laptop is out of warranty a month... Ordered another charger and the laptop still doesn't load.  The LED next to the switch used to blink 3 times and the laptop would not boot. Now, the light flashes at all. X 360 support messages reading it looks like others have had the same question and he had a failed motherboard. This is a problem is there anything else I can do? Very disappointed in this whole situation, given that I spent on the laptop and the timing of this question.

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
    If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  • X 360 spectrum: spectrum HP x 360 under linux

    Hi, I bought a new HP spectrum x 360,

    For my work, I have to run the simulation trought OpenFOAM is easyer for me to use Linux.  Almost everything works out of the box, except one... sound thing.  I post a bug on launchpad, here the link:

    Spectrum of bug Hp x 360

    Like almost everything that you want to debug the phenomena. I know that you have not officially support linux on this computer, but it would be fun to be at least compatible linux.

    Thing I know:

    There was a bug that really resemble this one on the Dell XPS 13. The bug was in the bios that was setting his alternative map that did not work. In my opinion, is the same thing here. I need to find a way to tell the bios to load everything as if it's windows 8.1 (Yes, I just don't ask for any special treatment.)

    Thank you

    I'll give you all the support you need. I really want to fix this bug.

    PS: (HP if you correct this bug you will sell more than three of these computers, they all want one in the lab!)

    Follow-up:

    It looks that we now are hable to use mode strives of the sound card. It is good, but not perfect. The fix for the i2c will come soon, last kernel code ask a file mysterious drivers that does not currently exist in the directories of the linux firmware. Therefore, this case is closed because the only such issue. Follow the improvement furter launchpad bug.

    * THE SOLUTION CAN NOT BE THE SAME FOR YOUR DISTRIBUTION *.

    Of Spano:

    If you use gummiboot , you should have something like this:

    options acpi_osi ="! Windows 2013 ' acpi_osi ='! Windows 2012 "acpi_backlight = vendor root = / dev/sda2 rw

    The solution to the title of this post is for Debian-based distro. I'll put the solution for the other activities of distribution on this post, if they are on the forum. (You can't find it? Adjust the solution to adapt to your distribution and post-its, you make people happy )

    I SOLVED IT!

    After hours of pain, I can now use the integrated sound card with headphones, as well as the internal speakers.

    How to:

    Change grub config by:

    'sudo vim/etc/default/grub.

    Change the line:

    GRUB_CMDLINE_LINUX_DEFAULT = "quiet splash".

    TO:

    GRUB_CMDLINE_LINUX_DEFAULT = "quiet splash acpi_backlight = vendor = acpi_osi'!" Windows 2013 'acpi_osi ='! Windows 2012' "

    Then run:

    'sudo update-grub ".

    Restart twice.

    BOOM! The sound works in the headphones. The sound card is now in mode HDA (not I2S).

    To confirm, run:

    "aplay-l" and make sure that you have the following in the output:

    "map 1: PCH [HDA Intel PCH], device 0: analog ALC3242 [analog ALC3242].
    Subdevices: 0/1
    Subdevice #0: subdevice #0 '

    I use the Linux kernel spectrum 3.19.0 - 21-generic #21 - Ubixuntu SMP on Ubuntu x 64.

    ARO

    Ingmar

    EDIT: Even the speakers work, they have just muted in Alsamixer. Hallelulja!

    Edit2: Added the 'acpi_backlight = vendor' for parameter input on the options line, based on @spano. Thank you!

    Edit3: Difficulty as pointed out by venividivici24

  • 4002dx x 360 spectrum: spectrum noise x 360

    I bought a x 360 spectrum about a month with an i5 processor, and lately I've heard a consant to the region of fan buzz. Does anyone else know this?

    I suggest you to contact HP for warranty repair. This isn't a common problem.

    https://support.HP.com/us-en/contact-HP/product/HP-spectre-13-4000-x360-convertible-PC/7527520/model/7791774

    It is better to get this repair took in charge while the laptop is still covered by the warranty.

    Check the status of your warranty here.

    The problem could be distribution\charging of power on the motherboard or circuits devices of transfer of energy heat pipe fan & heat.  Capacitors that fail may make squeaking noises.

  • HP Active Pen J4R51AA: HP Active Pen J4R51AA works with new spectrum x 360 13D set Lake?

    The HP Active Pen J4R51AA worked fine with my x 360 Broadwell 13 spectrum. Is is officially supported on the last generation (Lake set) of this 2 in 1?

    Hello

    Welcome to the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

    For the best experience on HP forum, see our Guide to HP Forums to learn more.

    Thank you for sharing the details of the problem. I want to help you.

    The active pen HP is not compatible with the new specifications set Lake spectrum x 360 13D.

    The link below will help find the models that are compatible with the active stylus HP.

    http://support.HP.com/au-en/document/c05166879

    Please let me know if it works!

    See you soon!

  • HP 360 x spectrum: spectrum 360 headphone jack x: CTIA or OMTP?

    A question that they should put in the list of specifications, but I can't find anywhere:

    Headphone/mic spectrum HP 360 x is CTIA or OMTP?

    Thank you

    Hi @ToniBord,

    Please become a member of the HP's Support Forums. I understand that you have a question about the audio port. I'll be happy to help you.

    HP uses the current standard for audio ports, CTIA.

    Please let me know if that solves the problem, or if you need assistance. In fact, if this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. Thank you

  • Spectrum x 360: how to stop the x 360 disable keyboard spectrum just because the laptop is turned on its side?

    Hello-

    When my x 360 spectrum is turned on its side, (IE, use it while fixing my side) of the keyboard and trackpad turn off, as if I was with her in the form of tablets. (It is also used to change the rotation of the screen, but I fixed per rotation lock).  Windows 10 seems not really think of it in tablet mode based on the sidebar settings, the keyboard is still physically in the position of the ordinary laptop - it's all the computer itself, which is turned. Is there a way to disable this feature? What software is responsible for determining when the keyboard and the trackpad turn off based on the rotation of the computer?

    Thank you

    Merrick

    Upgrade to the latest version of the BIOS has often attached to this issue. The keypad disables now rarely when turned on its side. (He does still sometimes, but it is very rare compared to before, and if move you it a bit is fixed).

  • Spectrum of HP x 360: connection Bluetooth HP spectrum x 360 with headphones Bose QC 35 problem

    Hello

    I have a HP x 360-13 - 4070nz (ENERGY STAR) spectrum and I just bought a headset Bluetooth of Bose, the new Bose QC 35. The headset works like a charm, any 10 Windows PC I tried (XPS13 Dell, Lenovo Yoga) and with my Nexus Android 5 X. However, I have a blocking problem if I use it with the spectrum of x 360.

    Pairing of works, even if I had to repeat the process several times. Once paired, listen to music works for the most well - in stereo mode.
    The problem is when I try to make a call. The problem is the same with any program, Skype, Skype For Business, overview of Skype or my Softphone (Bria). I can hear the consideration, but they cannot hear a really static noise. I tried an echo / service test sound with Skype and the recorded sound is exactly as my counterpart described. I can save and attach if you wish.
    I've updated all the drivers, sound card, Bluetooth, BIOS, I've updated Windows 10 anniversary Windows 10 update, and I updated the 1.0.3 to 1.06 QC35. Nothing helps. I tried the configuration setting possible, remove the Bluetooth device, added again etc. Always static noise.

    It is clearly a problem with the spectrum x 360, and as I know that this model had several other Bluetooth issued before. So my question to HP: could you please look into it and update the drivers to support the Bose QC35, which is a market success?

    Thank you and best regards

    Update:

    HP support has been studied on my computer. It is hardware related. HP sent me the new chip Intel Wireless (combining Wifi and Bluetooth). I had to open the laptop and replace the chip on the motherboard.  This procedure unfortunetely has not resolved the .

    There is nothing I can do without sending the laptop for repairs.

    As an alternative, HP recommends purchasing a USB Bluetooth key / dongle.

    I don't know yet if I'll send it repair. It's a phone that I sue for work and I can just live without it for several weeks.

    So I gues no QC35

  • Spectrum 360: Cable ethernet for spectrum 360 connection?

    Nobody knows what the best approach for wired ethernet is on these laptops?  I did not know that they do not have an ethernet jack, my son is off to College with a spectrum of 360.  Looks like they recommend an adapter, but I don't know if it's via the HDMI or USB? And then, what size is the USB?

    Any help would be appreciated!

    Jeff

    USB 3.0 and USB 2.0 are the same size and are backward compatible.

    USB 3.0 ports are blue or have at least the symbol (super speed)

  • Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

    Hello everyone,

    I bought this fantastic machine called spectrum x 360 and I love it.

    Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

    This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
    This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

    Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

    Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

    The entire screen works fine for normal operations, no artifacts.

    Replication of the problem
    Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
    Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
    Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

    I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):

    -update panel houses;
    -advanced mode; energy saving

    If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.

    In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
    The rest of the computer works correctly.
    Any idea to solve this problem? Or should I keep these options turned off power saving?

    Hi, thanks for your help.

    I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
    Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
    I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
    To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
    It certainly is a problem with this energy-saving option.
    Now everything works fine.
    If the problem appears again, I will post more information.
    Thank you for your support.

    I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.

  • HP spectrum x 360 13-4003DX: dismantling of spectrum x 360 HP 13-4003DX

    Hello. I want to replace the charge port in my computer hp laptop, the spectrum of HP 360 x 13-4003DX running continuous. The laptop stopped charging, but it boots still on. I already ordered the corresponding part: 801513-001.

    I would like information on:

    -How to disassemble the laptop. I already watched this guide: http://www.hp.com/ctg/Manual/c04055643.pdf, but it doesn't seem to be for my laptop.

    -What screwdriver (s) to use for disassembly

    Thank you.

    Hello! @phorpt, thank you for visiting the Forums from the HP Support!

    I understand that you need to know how to replace the charging port running continuous.

    Please see the link that guides you with video instructions to replace the charging port.

    Link: http://hp.care/2dL4vw3

    Select the product category, product family, and ranges of products accordingly.

    Then select remove\replace FRU. Select the part of the list that you need to replace.

    Let me know if it helps!

    See you soon!

  • Ghost 360: bought new spectrum 360 and active active pen stylus

    I just bought the spectrum of the 360 HP (15-inch screen) with 16 GB and I7 process. I bought the assets assets stylus pen. Indications that you simply put the pen on the screen tap or tap and it will start working. Well, he didn't. I googled all, the driver is installed, I calibrated the screen. My finger is working to write, but the pen does nothing.

    What can I do to trouble shoot the issue? Yes, until someone thinks I'm a total jerk, I bought a new battery.

    Hi @Bzeeb,

  • x 360 HP spectrum: windows store: "fallen server."

    Hi guys!

    I recently bought the hp 360 but spectrum however its has some problems such as: cannot open my windows store. whenever I try to open it it says "dropped the server we all have bad days", then it auto closes.

    Secondly, I have a little problem with the keyboard you. I sometimes like twice a day.

    When I turn on the computer the keyboard is not active at all and I have to switch to Tablet mode and then convert it upright in order to make it work!

    If someone please help me solve these problems if not this computer is excellent and I would absolutely recommend it to everyone!

    Thank you!!

    Hi @francky,

    Welcome to the HP Forums! I read your post and wanted to help.

    I understand that you have problems with the shop Windows and the keyboard.

    Here is a link to help with the problem the Bank of Windows: http://www.thewindowsclub.com/the-server-stumbled-windows-10-store

    Please try the document below to solve the problem of keyboard:

    HP - computer keyboard laptops laptop troubleshooting (Windows, 10, 8)

    Let me know how it goes.

    If this post helps you solve the problem, please pay to the front by clicking on "Accept as Solution", on the right the small icon.  You can click on thumbs to the top of the icon to see the gratitude!

    Kind regards

  • Can I use a 27 "Thunderbolt display with a spectrum HP 360?

    Can I connect a Thunderbolt display 27 "at the top of a tower HP spectrum 360?

    Only if it has a port TB.

Maybe you are looking for

  • Cannot change the value of mousewheel scroll

    After you have reinstalled windows and all I had on my old desktop, I seem to be unable to change my amount of scrolling the mouse on firefox. I looked through all the troubleshooting questions that have already been posted, and all users have respon

  • Downgrade of Win7 to Winxp on laptop

    Have a ProBook s 4540 I received last December and it came with Win7.  I have a legal WinXP installation disc and product key and I want to downgrade the OS on my laptop.  But I have a few questions first: is there a difference between decommissionin

  • Color LaserJet CP1515n colour misalignment between CMYK print

    The registration of 4 colors happened significantly out of alignment by up to 2 mm horizontally and vertically. I tried all HP through article 11 documentation, but no amount of calibration or change supplies will put the colors in alignment. I had h

  • New ghost Z60t HD images

    I got my Z60t for almost 3 years and I tried a new hard drive for her ghost, but cloning and restore from a backup image does not work. Ghost for some reason is not make the new partition C: bootable. Rescue and recovery will do nothing to remedy and

  • ASA Anyconnect VPN do not work or download the VPN client

    I have a Cisco ASA 5505 that I try to configure anyconnect VPN and thought, I've changed my setup several times but trying to access my static public IP address of the external IP address to download the image, I am not able to. Also when I do a pack