Spectrum of HP laptop 13.3: the Hp spectrum battery is not replaceable?

Basically what the title says

I'm talking about the new model 13.3

Price: ~ 1 k

Hello

It's a very fine internal battery can be replaced by a new one if necessary

Tags: Notebooks

Similar Questions

  • my laptop with 7, the other with vista does not, windows message told to go update that does not exist on the start menu. I'm locked out using my computers

    my laptop, 1 vote against and 7, the other with vista will not work.  I use norton 360.  message at startup said to go to microsoft update on the start menu.  There is no windows update in the start menu.  I'm locked out using my laptop.  Help, please

    For Vista, see http://windows.microsoft.com/en-us/windows-vista/How-can-I-tell-if-my-computer-is-up-to-date and http://windows.microsoft.com/en-us/windows-vista/Updating-your-computer

    For Win7, see http://windows.microsoft.com/en-us/windows7/How-can-I-tell-if-my-computer-is-up-to-date and http://windows.microsoft.com/en-us/windows7/Updating-your-computer

  • I recently did a full restore on my windows xp laptop and now the updates of windows do not work

    I'm totally frustrated.  I thought I was doing pretty good when I totally restore my computer as long as the plant.  but, to my surprise, I can't seem to get the updates of windows to work... Help

    Hi RoxanneQ, is required to use Windows to SP3 level out.

    To determine which service pack is currently installed on your computer, follow these steps:

    1. Click Startand then click run.
    2. Copy and paste, or type the following command, and then click OK:

    winver

    A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    See also: http://support.microsoft.com/kb/2497281
    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

    If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
    (for single PCs too)

    For Windows XP Service Pack 2 installation procedure
    http://support.Microsoft.com/kb/875364

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

    Ref: http://taurarian.mvps.org/WU_XP/0x80240036_0x8024400A.html

  • My laptop, connect to the network, but not the internet!

    My laptop connects to the network media blank but not internet. My roommates using the network can connect to the internet. I tried various things but not vain. I also tried to get in touch with the Virgin on this subject, but they can help. Is it my laptop and is there something special I need to do with a computer hp laptop. Help, please! Thank you!

    Hello

    On the Start Menu, click programs principally made, click Accessories, right-click on command prompt and select "Run as Administrator".  In the prompt, type the following commands, pressing on enter after each command.  Include spaces in the commands, as indicated.

    ipconfig/flushdns

    nbtstat-r

    nbtstat - RR

    netsh int ip reset c:\resetlog.txt

    netsh winsock reset

    Type exit and press ENTER.  Restart the PC and see if you can log in now.

    Kind regards

    DP - K

  • My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

    I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

    I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

    My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

    Hello:

    If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

    Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

    If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

    Paul

  • Media in the CD/DVD drive is not readable

    Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device responding drive is empty or the media format is not supported

    WINDOWS VISTA HOME PREMIUM SERVICE PACK 2

    RANGE OF COMPAQ PRESARIO CQ61 NOTEBOOK PC

    • My laptop can read the DVD, but it will not read I try to play any CD. It will be still asking to insert the disc when I.
    • See below the report of Mr. Microsoft Fix

    I appreciate your help with this. Thank you

    Problems found

    Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device

    Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device

    The drive is empty or the media format is not supported

    Not fixed

    Insert the decipherable by media

    Failed

    Verified issues

    Class filter drivers are corrupt

    Class filter drivers are corrupt

    One or more specific class filter drivers are missing/corrupted

    Checked

    Filter of device drivers are corrupt (Optiarc DVD RW AD - 7561 ATA Device)

    Filter of device drivers are corrupt (Optiarc DVD RW AD - 7561 ATA Device)

    One or more device-specific filter drivers are missing/corrupted

    Checked

    Device is not working properly (Optiarc DVD RW AD - 7561 ATA Device)

    Device is not working properly (Optiarc DVD RW AD - 7561 ATA Device)

    This device is faced with a problem that it prevents to function properly

    Checked

    Drive is disabled (Optiarc DVD RW AD - 7561 ATA Device)

    Drive is disabled (Optiarc DVD RW AD - 7561 ATA Device)

    The CD/DVD drive have been disabled in Device Manager

    Checked

    Drive is not assigned a drive letter

    Drive is not assigned a drive letter

    The CD/DVD drive is not accessible via a drive letter assigned

    Checked

    Problems found

    Details of detection

    6

    Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device

    Not fixed

    The drive is empty or the media format is not supported

    Insert the decipherable by media

    Failed

    Insert a CD or a DVD disc play in the selected CD/DVD drive

    Verified issues

    Details of detection

    6

    Class filter drivers are corrupt

    Checked

    One or more specific class filter drivers are missing/corrupted

    Fix class filter drivers

    Not work

     

    Remove references to class filter missing/corrupt driver

    6

    Filter of device drivers are corrupt (Optiarc DVD RW AD - 7561 ATA Device)

    Checked

    One or more device-specific filter drivers are missing/corrupted

    Uninstall the device

    Not work

     

    Uninstall the device problem

    6

    Device is not working properly (Optiarc DVD RW AD - 7561 ATA Device)

    Checked

    This device is faced with a problem that it prevents to function properly

    Rescan devices

    Not work

     

    Look for changes in available devices

    Uninstall the device

    Not work

     

    Assign drive letters to all the readers who have no drive letter

    6

    Drive is disabled (Optiarc DVD RW AD - 7561 ATA Device)

    Checked

    The CD/DVD drive have been disabled in Device Manager

    Turn on the device

    Not work

     

    The device must be activated before it can be used

    6

    Drive is not assigned a drive letter

    Checked

    The CD/DVD drive is not accessible via a drive letter assigned

    Drive letter

    Not work

     

    Assign drive letters to all the readers who have no drive letter

    Hello

    Well you have studied the issues pretty well. Could be material.

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    A CD/DVD cleaner might help.

    CD have a tolerance + - and your must read on the edge outside these tolerances of discs.
    They may be delivered, but it is generally more economical to replace the disk.

    Several good info here:
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    ============================================

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Troubleshooting-new HP with Windows 7 spectrum XT, does not connect to the WiFi at home?

    So I just got my brand new HP ENVY spectrum XT Ultrabook with Windows 7 Home Premium installed. 64 bit. I start it, everything works fine, except that when I connect to my WiFi at home. I tried to connect, entered my password, but it does not connect. Also tried the easy connection on the router. No luck. I checked my old laptop which runs on Windows Vista to see if WiFi worked always, and this is where it gets interesting. I was able to browse the internet and internet worked, but suddenly Windows informed me that "another computer uses the same IP address" and it stops my internet capabilities on my old laptop. I connected my cable ethernet on both computers, and it works for both computers when it is plugged. While that plugged, I discovered that I could create my own IP address, which I did on my old laptop and so far that seems to have solved the problem. However, my DESIRE is always not connecting to WiFi. Any advice?

    Hi ZachRhodes3,

    ·         You get the error message?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Windows wireless and wired network connection problems

    5 steps: how to set up your network wireless home

    For reference:

    How can I troubleshoot network card?

    Wireless network card: frequently asked questions

  • After syncing firefox from one laptop computer to the other, I repeatedly get syncted phone has the same IP address as the original. Reverse?

    One of the results of these two laptops with the same IP address was that the original laptop computer proxy settings have been changed and I could not get into the internet. After you restore the default proxy settings, I again had access to the internet, but two laptops always have the same IP address.

    You do not use DHCP to automatically assign different IP addresses?

  • Why FireFox 13 works differently on my desktop and laptops? On my desk, I have the old menu system that I prefer, but on my laptop, it's the new version.

    13 Firefox is the browser by default on my desktop and laptop, however, they have different menu systems. Why?

    On my desk, I have the old menu system that I prefer no doubt because everything is in English and easy to see and search. For example, on the menu desktop there a Tools option where I can quickly erase my history and cache.

    But on my laptop, it's the new paradigm where several menu commands are hidden and difficult to find, therefore, I do not like this new design. I don't understand why Firefox made this change, when the old system was much better and more effective.

    Is there a way I can get the old system menu back on my laptop?

    Thank you

    1. I'm not running XP, I use Win 7 on both systems.

    2. nothing happened when I pressed the ALT key, the menu bar does not show upward and I'm frustrated. However, I kept trying, hold the ALT key and finally he appeared. I then checked the menu bar, and it seems as if it worked.

    Thanks for your help.

  • Laptop HDMI to the TV, no sound

    Hello

    Today was my first time to connect my laptop to my TV high definition HDMI cable. It reformats immediately and the computer appears on the TV. I had nothing to do expcept connect both devices with a HDMI cable.

    I wanted to play a video through Windows Media Player and noticed that the noise was coming from my laptop instead of the TV? The image was very good.

    How to make the sound come from the TV?

    My OS: Windows 7 64 bit Home Premium edition

    Ok... Just Double check... When you have checked for the HDMI option under playback sound properties, has been the HDMI cable connected to the TV? As the HDMI option will not appear under sound, up to what the cable connected to the TV HDMI...

    Here's the graphic driver for your laptop... ftp://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45590.exe

    Here is the Audio driver for laptop... ftp://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45211.exe

    Install the 2 drivers above only if the HDMI option does not appear under sound after you connect the laptop to the TV using HDMI...

  • I have HP DV6-1256tx, I want driver for my laptop compatible with the next operating system Windows 8...

    Hello. I have HP DV6-1256tx, I want drivers for my laptop compatible with the next Windows 8 operating system. How to download, can somebody help me please...

    Give me the link or something where I can download the drivers...

    Thank you

    Edriss Dave

    HP does not currently have drivers for Windows 8. You probably won't need them. Windows 8 is not coming. It's here!

    Just do the installation on a spare hard drive and bring the original HARD drive to a safe place.

    . Windows 8 has drivers built in for most laptops and desktop computers. I did have to look for a driver in two facilities. One was an HP mini and the other was a Toshiba laptop.

  • Satellite X 200-191-online laptop turns on the screen for 4 seconds, black, loud snoring

    * Satellite x 200-191 _ * _

    Intel Core 2 Duo T7700 processor
    * Origin: * 1024 MB + 1024 MB of memory 667 MHZ/512 MB of VRAM * replaced: * Kingston Kingston KVR667D2S5 / 2G (I have this x 2)
    * Origin: * 200 + 200 GB SATA hard disk drive (4200 RPM) * replaced: * only 1 HDD on the left, the other I'll be back in 2 days.
    17 WSXGA + TFT TRUBRITE screen
    HD DVD-ROM drive
    56K Modem / Lan
    W Lan (802.11 A/G/N)
    1/3MPixel camera Web
    Bluetooth
    Microsoft Vista Home Premium 32 Bit

    _ * My problem: * _

    I removed the battery, plug it into the power. Charging light lights up.
    I press the power button, power led turns of. Followed to the hdd led tower which flashes real quick, on, stays on for 1 second and then turns of. The power led stays on all the time.
    2 seconds after the power button, a fan starts to blow, while the hard drive the mention above led blinks for 1 second, 2 seconds after the fan starts blowing, it turns off.
    We are now 4 seconds later, roughly, all stopts, except a very small minor hum. (I just left on during a few minutes, his rest, nothing happens.) (Writing this all let him down for 10 minutes, the computer laptop op warms a bit, the card becomes warmer, but still only a tiny buzzing minor.)

    + My laptop works for 4 seconds, will not be any screen (black screen) does not load even BIOS. What could be the problem? +

    _ * Fixing? : * _

    OK so I let the laptop after a few months, said he was dead, just dusty. (Read the story to get it)
    But since last week, I thought that becomes dusty, I never opened a laptop before, why I try to make that custom.

    _ + * I replaced the modules of memory, Slot A and B, so many memories, same time, at a time, all means. * + _

    _ + * Since I have only 1 HDD, I used it in both slots. Looks like no difference. Using no. HDD, I don't have the zoom very tiny minor! *+_

    I followed a guide [http://www.irisvista.com/tech/] to open my laptop, to see what is inside.
    Find no loser caps, but found a see oil and a white paste.
    Closing the laptop to try, I've accidentally screwed some wrong in the laptop screws, drill the top cover of my laptop, but no fleas have been affected in this: P (Yes, Im a little towards the fort, I thought I'd use force for a couple of the screws was not the best thing I could do, but now I know) : p).

    ************************************************** ************************************************** ************************************************** ***
    * SOOO * my question, while I wait for the extra HDD (do in 2 days). (Probably not make any difference)
    What could be wrong, more precisely. I love should try to take the video card or something?
    Is there something I should do with some soldering?
    All tips/tricks that might work, weather to repair the laptop, or to refine the problem, a small part that I could replace it?

    Best regards
    Danny Visser
    The Netherlands
    ************************************************** ************************************************** ************************************************** ***

    _ * History: * _

    Don't know if it's not important, but just to let you know, so interested what happened at the laptop ;)
    I bought the laptop in the form of computers (in the Netherlands) asked that laptop mentioned above, with 2 things have changed. I wanted more memory, and I wanted windows XP. The shop told me it was possible. They bought me the laptop, they replaced with memories of kingston memory. They installed windows XP instead of Vista. They portable worked at that very moment. So, I bought the laptop to work with 1 year warranty.
    With the additional files given with the laptop, I could increase my warranty from 1 to 2 years free, so I did.

    After a few weeks that I noticed that the laptop became real probably hot after prolonged use. But according to the manual, it was normal.
    I used the laptop to the games, but also 2 months for a study of play. So I take several times at school in a backpack.
    After using only not for school, I reinstalled Windows Vista 32 BIT

    When a very uncertain when exactly, I noticed that it does (probably same problem as I have now) but I was really relaxed about, tried subsequently and in some way, it worked again. It happened maybe about 5 times in total.
    Knowing something was wrong, I brought computers to the form. They checked. (No not showing me what they did to her) But he told me that I had nothing to fear.

    After about 2 years, I actually sold this laptop to my mother. She used once or twice (she really looks like noob, just about computers in general, without even knowing if it should double click on the icons or not) she took him one or two times on TRIPS and they after about 2 years and 2 months... this problem happened.

    My mom knows a guy and a friend of this guy, work a lot with laptops broken, who told me that the problem was the motherboard _ + _.

    I decided to take it back to the shop. After a long class being there (about 6 to 8 weeks) (I go to the store like 15 times). The shop was able to tell me it was the motherboard. That the motherboard could not be fixed and a new way to expensive.
    + (I have known at this point, after the motherboard, what this laptop was not open yet. The screws were still new). +
    Funny information (not for me), this period of about 8 weeks, in fact we me lies like... I left a message on your voicemail, I do not HAVE a voicemail... Sorry for the caps, but im still xxxxxx on these lies.

    Therefore still believe in the shop... my laptop has gone... dead... but so since last week, I started looking into the laptop I... (Fixing)

    Hello

    To be honest that s a very long history and I think that we can t help you here and tell you what the problem is exactly because it s just a user to user forum. I think that you need professional help technicians of laptop, they can check what the problem is.

    According to your assignment I think that it s a hardware malfunction, perhaps the card mother, but this should be verified by professional technicians.

    You need to contact a service provider authorized in your country. You can find a list here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    I m sure all you can specify with the ASP. The guys are really friendly and do a good job.

    Good luck! :)

  • My laptop crashed on the ground - can I order the whole cage?

    * My laptop crashed on the ground... *.
    .. and the whole cage is broken - the lcd semms to be ok.
    I can start the notbook...

    _My question: _ I can order the entire cage somwhere (chassis, chassis, top (that the content of the LCD))

    concerning
    Neo

    I m pretty sure Googling around you will find place on order broken parts. I don t know where you live but you can also communicate with the Toshiba service provider in your country.

    In my opinion best and the best for you is to buy laptop faulty on eBay (motherboard failure) and exchanging broken parts.

  • Laptop stops when the power cord is not plugged in but the battery is charged to 100%.

    just happened this morning.  accidentally deleted the decision-making of the laptop.  and the judgment of the laptop.  weird because this has happened before and no problem.

    However, this phone wouldn't turn.  until I have plug AC laptop would be the power of the laptop on.  I checked the battery is the meter displays 100% charged.  in windows, it is 100% loaded.  but as soon as I unplug the laptop, the computer shuts down.

    I have windows 7 and my computer is HP dv6t Quad Ed.  any help would be much appreicated.

    Plug the power adapter. Connect to Windows and open the HP Support Assistant perform the battery test. Post your results here.

    If you have the most recent UEFI (v 5.1 or higher) environment installed-> press-> power button press the ESC key to call the menu of boot - select F2 the System Diagnostics-> PC HP Diagnostics UEFI material-> select components-> battery Test tests.

    Post your results here in your thread.

    Best regards

    ERICO

  • HP Envy laptop - 15-ae011na: HP Envy - keyboard and Trackpad not working after the mode 'sleep'.

    HP Envy laptop - 15-ae011na

    I have this laptop for only 1 week, he did various updates. I guess that's from Windows 8 to 8.1. He also completed an update of the BIOS with HP Support Assistant.

    Question: When the awakening of my laptop mode 'sleep', my trackpad and keyboard do not work, I have unlock my PC using HP Simple pass, then press the power button to restart the machine.

    Troubleshooting: I followed some advice for troubleshooting on the support page which lead me to uninstall the keyboard driver then restart my machine. I have all the latest drivers aswell.

    Someone has an idea what might be causing the problem? Ideally, I'd like to do a restore or upgrade of Windows 10 immediately.

    Thank you.

    Looks like this has been caused some my driver problem with Windows 8.1 and I guess that's with HP SimplePass such that it would not recognize the keyboard and the trackpad after waking up to use it.

    I have upgraded to Windows 10 that looks like a solved the problem.

Maybe you are looking for