Spectrum XT of the HP Touchsmart Ultrabook 15-4010nr

Similar Questions

• Help! Disable the touch screen on Envy Touchsmart Ultrabook 4

  Hi, I have a problem, try to disable the touch screen of the Envy Touchsmart Ultrabook 4 function in Windows 8... I was looking for an answer on how to do it, but I did not find anything. I tried the method of the control panel > hardware and sound > pen and touch and then disable the option "use your finger as input device", but this option is not there for me! If anyone knows how to do this, I would be very grateful.

  Hello

  I have another type of TouchSmart, but this may work for you:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

• Trying to find advanced settings of the BIOS on my envy Touchsmart Ultrabook 4

  I'm trying to locate my envy Touchsmart Ultrabook 4 power management settings.   I am running the Insyde BIOS verision F.23.  When I open the BIOS to F10 (I also tried F10 + A with no result) before starting the only options are to hand, security, System Config. in and out.  Is anyway to get the advanced settings in the BIOS?  Thank you.

  Woodyzen3000,

  I understand that you are looking for the power management option in the bios.

  After doing some checking this bios has no option for the management of food as some old versions of some time got back on our old systems. I was actually able to get their hands on a similar Ultrabook built with the same version of the bios and the options are no longer present.

  It is possible that perhaps a next version will be the available option. In order to keep an eye on this link because the future updates to the bios would be here. You simply enter the product number, and then select your operating system.

  If you have any questions do not hesitate to ask.

  Thank you

• HP TouchSmart Ultrabook 4 ENVY: Unknown devices in Device Manager

  Hi all

  I had to reinstall Windows 8.1 (x 64) on my ENVY of HP TouchSmart Ultrabook 4-1170EZ (P/N C1X23EA #UUZ) after a system failure caused when you try to install Microsoft One Note 2010. The system is now running, but Device Manager shows two unknown devices that are

  ACPI\HPQ0004\3 & 11583659 & 0
  ACPI\HPQ6001\2 & DABA3FF & 2

  Anyone know where to get the driver software for these devices? I wasn't able to find it on hp.com

  Thanks in advance

  Hello

  Please try:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_125640_1

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58720.exe

  Kind regards.

• Envy Touchsmart Ultrabook - boot from Usb Flash or optical drive

  I just this envy Touchsmart Ultrabook (14 inches) with 8 win and it works very well, but one thing that I can't make it work is to be able to boot from a USB stick or a cd usb player.  This system doesn't have a built-in optical drive.

  I changed the configuration Bios Boot UEFI for Legacy and also re arranged the boot order so the USB drives are before the internal hard drive.  I also tried to change setting USB 3 auto... still not able to boot from a usb device.

  Both the usb flash drive and cd drive to boot on my HP desktop and I recently tried the usb flash drive on a new laptop Lenovo comes with Win 8 and it worked.

  I need to do so that I could run my backup - Acronis True Image software.

  Any suggestions on what then try?  Thank you.

  Yours is a laptop very different mine - so this may not apply... but you can try what I posted here: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/bios/m-p/2260991

• The HP TouchSmart 420-1000 t is a PCI-Express x 1 card?

  Hello
  I have a problem: I recently bought an HP TouchSmart 420-1000 t (hp touch smart pc 420, n {removed privacy} series)
  Productn; QB908AV #ABA, model N; 420-1000 t) and I noticed that she had no firwire port. the problem is that I need a firewire port to my Sony HVR-M25AE recorder... I bought a PCI Firewire 1394 with 3 + 1 Ports controller card, but I have not found a PCI-Express x 1 on HP TouchSmart...

  The HP TouchSmart 420-1000 t is a PCI-Express x 1 card? ... If so: where is this you?

  Please help me: I galley

  Telhouni1, welcome to the forum.

  You are welcome!  It's a pleasure.

  Here's a mini adapter PCIE card for your computer.  I suggest to contact TigerDirect Customer Service to ensure that it will not go in the space provided.  They should be able to help you.

• How to connect the HP Touchsmart 600 to a projector

  I have this problem, I can not connect my touchsmart600 to Sony projector. I have the s-video cable, but when I connect to a projector, nothing happens. I bought HDMI VGA adapter, I connect to my computer with projector and nothing shows. Please, someone help me.

  When you request support, please provide the HP model name and/or product the full number of the computer in question. In addition, please provide the full model of the Sony projector number. Without this information, we can not provide you accurate assistance.

  Most of the HP TouchSmart computers isn't any video output (VGA, DVI - D or HDMI). Some HP TouchSmart computers have a HDMI input to connect a DVD/Blu-Ray player or game console. Often the only way to connect an external display to a TouchSmart computer is using an adapter USB-to-video as the EVGA UV plus + UV39 or UV19.

• Spectrum of 15-inch TouchSmart Ultrabook XT

  I really like the look of the new spectrum, but I am confused as to how much memory you can put in. Can anyone answer what is possible for some wise RAM?  On the site set up and buy, there no options for memory - only 4 GB, which won't cut it for me. -No idea if there could be an option double hard drive in the works? As much as I want this, I'll probably have to wait for the next generation to get closer to what I want...

  But it look like a beauty!

  When I checked HP Direct, he says the spectrum XT 15 t-4000 Touchmart came with 8 GB of RAM (4 GB on board + 4 GB DIMMS). But it does not say what is the maximum RAM, it supports.

• Spectrum x 360: how to stop the x 360 disable keyboard spectrum just because the laptop is turned on its side?

  Hello-

  When my x 360 spectrum is turned on its side, (IE, use it while fixing my side) of the keyboard and trackpad turn off, as if I was with her in the form of tablets. (It is also used to change the rotation of the screen, but I fixed per rotation lock).  Windows 10 seems not really think of it in tablet mode based on the sidebar settings, the keyboard is still physically in the position of the ordinary laptop - it's all the computer itself, which is turned. Is there a way to disable this feature? What software is responsible for determining when the keyboard and the trackpad turn off based on the rotation of the computer?

  Thank you

  Merrick

  Upgrade to the latest version of the BIOS has often attached to this issue. The keypad disables now rarely when turned on its side. (He does still sometimes, but it is very rare compared to before, and if move you it a bit is fixed).

• Save the power/Touchsmart 300

  How do I make my moniter of the time to save energy

  Hello Mur6950:

  I asum you still the touchsmart version 3 software installed on your computer, unless you updated to version 4 of the touchsmart software. Go to your computers Control Panel. On the upper right corner, you'll see by: change to small icons. Now everything is displayed down the long lists. You will see Power Options click on it. The following window opens. This is where you change power settings run. You are welcome. On the touchsmart software version 4 I'm not sure how the two are similar. They should be about the same.

• Could not get the HDMI port to work on the HP touchsmart.

  I have a HP Touchsmart 600-1265 with an HDMI port. I have connected the computer to the TV but can not get any audio/video to display. I don't know if you need to activate the port or what you need to do to make it work.

  When I push the A / V button above the HDMI port it shows the computer displays and below, it is then them a VGA and HDMI boxes but when I scroll down and select HDMI the screen just empties for a few seconds and then back on the computer screen.

  What should I do to make this work?

  Yes, the entry also. This is what the switch you mentioned.

  See you soon,.

• TouchSmart 600-1350: what is the REAL TouchSmart 600-1350 RAM Specs?

  I see HP screwed up once again, big surprise there!

  Specification of RAM TouchSmart 600-1350 (citing the HP site):

  200 pins, DDR3 SO-DIMM

  Since 200 pin SO-DIMM is really a standard DDR2 and DDR3 is a 204 standard pins, I chose best educated guess one that suits and matches at speeds and tensions with the computer of my client for the upgrade. We ordered 2 Kingston PC3-10600 off 4 GB Max computer modules, but guess what? It don't work!

  Given that HP can't even say DDR2 DDR3 standards, can someone at HP who really knows what is up please tell me the specifications of memory live CORRECT for this system? Perhaps eventually make corrections to specifications of systems page too. Beyond that, a refund of $40 to my disappointed customer would be too big, but I not holding my breath!

  Anyway, why did 2 4 GB Kingston 204 pin PC3-10600 modules work? Normal blood pressure, nothing special...?

  Hello:

  Based on my experience, any HP PC with an Intel series 5 using portable memory chipset... it must be VERY specific with what you get memory.

  Please read this post related about this submission, in my view, that you have to buy...

  While it is a laptop, he uses the memory of the laptop and has a chipset Intel 5 series like the one you are working on.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/memory-upgrade-6550b/m-p/5340551/highlight/true#M63185

• These enhancements are compatible with the HP TouchSmart 600-1120

  IM thinking to do this

  Intel Core i5 430 M Dual Core (A)

  and I was wondering if it would be good for the games because I think intel core i7 is a bit expensive. If not, which ones is better for about the price of SMEs?

  IM also thinking about getting more RAM and I was wonderingif the ram card would be compatible with my computer.

  G.SKILL 8 GB (2 x 4 GB) 204-pin DDR3 SO-DIMM DDR3 1333 (PC3 10600) laptop memory model F3-10600CL9D-8GBSQ

   

  also, can someone send me a link on where to find video cards I think look terrible, and I hope that I can update if I get the new processor intel core. and which ones would work for the game, at least its unnecessary.

  Hello

  The following link shows the specifications of your computer:

  HP TouchSmart 600-1120 desktop PC

  1. CPU: no problem you can see a list of the CPU support on the link above.

  2 for the RAM: please check the following specifications:

  Upgrade memory information:

  • Dual channel memory architecture

  • Two DDR3 SO-DIMM Sockets (204 PIN)

    • SO-DIMM type-PC3-10600 (DDR3-1333)

  • Memory non - ECC, unbuffered

  • Supports 4 GB DDR3 SO-DIMM

  • Supports up to 8 GB on 64 bit computers

    Memory maximum only if you use DDR3 SO-DIMMS to 4 GB modules.

  • Supports up to 4 GB * on 32-bit computers

• X 360 spectrum (4110dx): reverse the scrolling is not consistent throughout the BONE

  I just got my X 360 spectrum and I have two reverse scrolling issues:

  1 scrolling on the Touchpad does not always work. I found the option to turn it off (when I slide down, I want the screen to do the same thing), but it works only in some applications, like Google Chrome, but not in the settings or Windows store. Is it possible to get this to be consistent in all of everything?

  2. in addition, it resets after that I restarted my computer. My choice can be set to a default value?

  Thanks for any help.

  Hello

  Try the following.

  First, download the installer of the Synaptics driver from the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72919.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  When windows has reloaded, hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Sound problems with HP TouchSmart Ultrabook 4-1118tu ENVY

  My Hp laptop suddenly has a problem with the sound; There is none!

  The message "no Audio output device is installed" appears when you move the speaker symbol.

  The laptop is now running Windows 8.1, but this problem happened weeks more than two months after it has been installed.

  Help, please!

  Hi all, well, I finally found a way to solve my problems of trawling other support pages and find tips on this page.

  http://h30434.www3.HP.com/T5/TouchSmart-PC/IDT-high-definition-audio-Windows-8-1/m-p/3012423#M21768

  Really, HP, you need to make it easier for people to solve their own problems when the corrections are as simple as that.

  I went to the Device Manager (be found easily by pressing the Windows key + X), open the "Sound" folder, right click on the device audio and selected "update drivers".

  Of course, I had weeks of no sound and the fix was simple, but not easy for people who use their computer with confidence, but aren't experts in their functions behind the scenes.

  I have someone else solve sound frustrations I had hope. "