Speech recognition - dictation and simple tasks

Similar Questions

• In the speech recognition dictation does not

  While he was trying to use the dictation in speech recognition, no speech text can't.  Was working fine before.  No change to the system, but has several different restorations using a variety of dates spanning back to the initial installation of Vista.  (It was the 10th time that I had to reinstall the OS since I got this computer...)  I am running Vista Home Premium 32 bit SP2, on a Dell XPS410.  None of the posts I've seen here have worked, but I wonder if anyone else has tried the spoken command "Start typing.  When I do that, it will convert text spoke of the individual letters but still will not recognize whole words, obviously not a very useful thing if you dictate a letter.  Normal order, IE. Start Notepad or grid of mouse or scroll work etc fine, but tempting product just dictation one what was that answer, or it will try to open a program, it thinks I want to.  I had re form this feature for every installation, it gets old.  All my drivers are up to date.  Once I did a fresh install and all updates from microsoft and dell and used the computer for anything, have not installed any third-party software be it, simply left the system power and ran only chkdsk and other utilities MS once a week or two and, voila! from now, the thing is finished installing, he already had errors listed in Event Viewer.  After 3 months of abot, he operated with about 60 percent of its features to work, the non-functional remains.  Does not require any intervention from the user to the first slide on the ultimate BSOD crash, which, as always results in a resettlement, as nobody on the planet can provide much in the way of answers or help.  I use computers and Microsoft products since 1983 on a daily basis and keep waiting and hope something that works as advertised, but already I see problems of the usual kind happening in windows 7.  Typical.   Ah, sorry, lost in a mug shot here.  Any suggestions on the problem of the dictation?

  I'm going to assume that you use a headset microphone any. If so and you are using a laptop with a built-in microphone, go to the sound control panel and disable the built-in microphone so that he is not inadvertently picking your voice as well.

  About the command "start typing", it is intended to allow you to start dictating individual letters as a, b, c, and so on. It is not supposed to be used to capture the General dictation. Before you try to dictate, make sure to disable this mode by saying "stop typing.

  Another good forum for more information of the Windows speech recognition is:

  http://tech.groups.Yahoo.com/group/Ms-speech/

  Good luck!

  -Russ

• Speech recognition freezes and requires the restart.

  SPEECH RECOGNITION - 2nd try. I am a disabled person who is 85% dependent on Microsoft speech recognition to communicate in writing. Two weeks ago my SR program would sometimes freeze and require rebooting. Today, it will stop working every 2 to 3 hours (I find other similar problem, still no solution) and requires the restart of the plant. He was originally also page redirect at will, which results in the loss of previously entered data. Needless to say that my program of speech recognition works pretty well right now. These last two days have been exhausting, trying to keep the operational programme. Can anyone offer advice, assistants, suggestions or point me down as a path to success?
  Sincerely, Stan

  Hello
   
  1. you did recently on the computer until the problem started?
   
  It seems that speech recognition works badly or something is broken. There are a few steps that we can try to solve this problem.
  Step 1: Sfc scanner to find and repair corrupt system files.
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER:
  sfc/scannow
   
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
  For more information, see this link: http://support.microsoft.com/default.aspx/kb/929833
   
  Step 2: If the problem persists, perform the clean boot to find out what is causing the problem.
  Follow step 1 to disable all non-Microsoft services and check if the voice recognition works great: http://support.microsoft.com/default.aspx/kb/929135
   
  If the voice recognition program always freezes, then follow step 2 to step 6 to know what causes this problem: http://support.microsoft.com/default.aspx/kb/929135
   
  Follow step 7 to start the computer in normal mode: http://support.microsoft.com/default.aspx/kb/929135
   
  Post back with the results, so that we can help you further if necessary.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In Java Windows speech recognition

  I am an online gamer and have recently discovered this on my computer's speech recognition software. It works perfectly on processors and in most of the situations of Internet (in fact, I use it here right now), but there is one that I don't know if it has the ability to work with - Java. I play games online with other people and I want to dictate in Java, but I found the only way to do that is to tell the computer to "tap" each letter individually. Is it possible I can do speech recognition dictation and Java compatible?

  Wow, that's a challenge.  It might be a little difficult to find an answer to this one, but I recommend to check first the support of Java site. I have a simple philosophy: just assume everyone is a piece of _ and then be pleasantly surprised if you find someone who is not.

• Speech recognition in labview

  HY everybody

  I'm new to labview. My project consists of elevator system of speech recognition. My first task is to go ahead with the speech recognition. I really need help.

  Concerning

  Kunal

  There are two ways to achieve speech recognition in LabVIEW... One way is to use the existing Microsoft Speech API to acquire sound and generates the text in order to compare the text with the input string. The other way is to acquire sound in LabVIEW, proceed with a signal processing to generate spectral components and store them in a matrix of dictionary and match then the input signal with the signal stored to power output.

  * Thanks to Bravo ^^ *.

• Make a shortcut for speech recognition

  Good well I tried to create on but fail, I tried searching the internet, failed to learn, I searched these forums... And has failed, so now I want to know, there is NO icon speech anywhere, but in the control panel (the "speech recognition Start") and I don't like the 'start-up windows startup' and I do not like, navigate I would just click 2 times on the element on my desk (although I might navigate to the icon ;)) just a simple tutorial would be nice) : D

  To create a shortcut on the desktop, open the control panel and drag the icon for the desktop speech recognition Options while holding down the left button of the mouse.

• Windows speech recognition

  I would try to use speech recognition.  I'd probably use my personal 3 Surface Pro (Windows 8) to do most of the actual speech recognition / dictation I can use at home and on the go. However, I work in a very technical field and first of all, I would like to use e-mail / document scan to get the system to understand the technical words that I commonly use. (I tried without it and he was so poor on the technical terms that it was useless to go). This information is all about my work however PC (Windows 7), not my personal PC.

  So is it possible to synchronize or move, speech recognition through multiple PC files?  A synchronization option would be preferable.

  Is it possible to change the system, such as the files are stored and read from a disk?

  There is a free tool from Microsoft backup profile WSR . It allows the backup and restore of the user profile on any computer. There is no option to synchronize or the method to store the profile of your speech on a server.

  Marty Markoe, MyMSSpeech.com

• How to turn off speech recognition

  I need to turn off speech recognition in my computer how do?

  I can't turn off the speech recognition, implemented and I need an explanation brief on how to do it. I tried, but it does nothing. The help of speech recognition button is not useful.

  He meant the speech recognition rather than ease of Access Options

  --
  ..
  --
  "montep" wrote in message news: f4fc20b4-189 d-4875-ae58-5feeb817a3f8...
  > It's not useful enough. When I shot on ease of access, there is no
  > advance options of speech at the top left. Then all it SAIS is to change the
  > administrative settings nothing on speech recognition.

• WAV files as input for speech recognition?

  Is it possible to use a wav (or mp3) file as input in the Vista speech recognition program and convert it to text?  It doesn't have to be perfect, just enough close conversion.

  I'm no expert on the subject, so I could be off here, but here are my thoughts for what they are worth.

  Even if you could place the speaker output in front of a microphone with no impedance or your comments I don't think that what you ask would work in technology current todays.

  The voice on the audio file will have to go through the training recognition speech engine voices.  If she has a few guitars and drums on it plays loudly in the background, you could see smoke coming out of the computer.  As it is, vocal training has to be in a quiet environment.  It would be better if you were to get a copy of the audio voice and type it yourself, or read into a microphone and let the speech engine to write it.

  Computer... Take a letter... A speech recognition update
  http://www.mckconsultinginc.com/speech-software.htm

  A manual transcription service would suffice?

  A1Transcriptions
  http://www.a1transcriptions.com.au/

• Speech recognition works does not in tutorials

  Original title: speech recognition works do not randomly think I say back, but does not recognize me in tutorial.

  I can't set up the microphone, but the microphone works for online games, the program thinks I say back when I don't say anything. I can't follow the tutorial, because it does not. It makes me crazy. Thank you

  Hi Bradsnoe81,

  You can try to set the speech recognition again and check if it works.

  Step 1:

  Set up speech recognition

  a. open the speech recognition Options by clicking the Start button, clicking Control Panel, on ease of access, and then clicking Speech Recognition Options.

  b. click Configure microphone.

  c. follow the on-screen instructions.

  Set up speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-speech-recognition

  Also check if the microphone has been installed properly.

  Links:

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  Step 2:

  If you're still having problems, and then try again to create a new user account and check if the problem occurs:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Uninstall speech recognition

  How to uninstall speech recognition?

  How to uninstall speech recognition?

  ===================================
  Maybe the following article offers some ideas:

  (823586) how to turn off speech recognition
  and recognition of handwriting in Office 2003 features
  http://support.Microsoft.com/kb/823586

  John Inzer - MS - MVP - digital media experience

• Speech recognition in Microsoft Word

  I just started using the Windows Vista built in the "Speech recognition" program and its working well except for one thing. I work everywhere (chat rooms, etc.) but not in my word processor (Microsoft Word, Microsoft Words or my internet Editor Tool). What Miss me? This button you click on so he can type in Word? I have severe arthritis in my hands in so little time, that I need this program to the top and running in Word because I am a writer and do a lot of studies and research papers. Help!

  Thanks in advance

  StevenAshe

  Hi StevenAshe,

  ·          Speech recognition has worked in Ms Word earlier?

  ·          What exactly happens when you try to use speech recognition with Ms Word?

  ·          What version of MS Word is installed on your computer?

  If you use recognition speech Ms Office 2007 is not available with 2007 Microsoft Office system programs.

  What happened to speech recognition?

  http://Office.Microsoft.com/en-us/help/HA102243561033.aspx

  Reference:

  About speech recognition

  http://Office.Microsoft.com/en-us/help/HP030840991033.aspx

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a way to launch Windows 8 speech recognition from the command line?

  Is there a way to start (and stop) Windows 8 speech recognition from a command line prompt? I found a post giving the command to start speech recognition in Windows 7 as "c:\windows\speech\common\sapisvr.exe - SpeechUX". Although it seems to start the process of sapisvr.exe, MISTLETOE (the microphone with closing, minimize and text box) does not appear.

  Offered the same post "taskkill /im sapisvr.exe /f" to stop the service, but it throw an error of permissions in Windows 8. In any case, I'm more desperate to a corect command-line START the voice recognition system.

  Any help would be appreciated

  Yes, there is a way!
  Try to use the link in the ease of access.

  Launch this way C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Accessibility\Speech Recognition.lnk and everything will work!

• Speech recognition does not recognize dictated.

  Recognization of speech is dictated not recognized as dictation, includes only orders. It is a novelty because when I started using it it worked fine. The microphone is very good because he always hears commands and responds correctly. Any ideas? Please, I beg you.

  Hi Mlee,

  Control Panel-> speech-> speech options Advance open pick and choose the language (English in the United States). Try the word by far.

  There are several ways to correct mistakes made during dictation. You can say "correct that" to correct the last thing you said. To correct a single word, say "correct" followed by the word that you want to correct. If the word appears several times, all instances are highlighted and you can choose the one you want to correct. You can also add words that are often misunderstood or not recognized by using the speech dictionary.

  To use the alternates Panel dialog box

  1. Click to open Windows speech recognition.

  2. Say "start listening" or click the Microphone button to start the listening mode.

  3. Do one of the following:

     • To correct the last thing you said, say "correct that."

     • To correct a single word, say "correct" followed by the word that you want to correct.

  4. In the Group of alternates dialog box, say the number next to the item you want, and then on "OK".

     Note

     • To change a selection, in the Group of alternates dialog box, say "Spell" followed by the number of the item you want to change, click 'OK '.

  Use the speech dictionary

  1. Click to open Windows speech recognition.

  2. Say "start listening" or click the Microphone button to start the listening mode.

  3. Say "open Speech Dictionary."

  4. Do one of the following:

     • To add a Word to the dictionary, click or say add a new Word, and then follow the instructions in the wizard.

     • To prevent a specific word of dictation, click or say prevent a Word from dictation and then follow the instructions in the wizard.

     • To correct or delete a word that is already in the dictionary, click or say change existing words, and then follow the instructions in the wizard.

       A speech profile has not been created. You can train your computer to better understand you by creating a voice profile that your computer uses to recognize voice commands.

       To create a voice profile

       1. Click to open speech recognition.

       2. Click Train your computer to better understand you, and then follow the instructions

          Thankzzzzz

• Speech recognition allows to Corel and Open Office?

  Speech recognition allows to Corel and Open Office?

  Hello

  Yes. You can use speech recognition with Open Office or other Non-Microsoft programs.

  a. speech recognition opened on your computer.
  b. go to options.
  c. Select enable dictation everywhere in the context menu of speeches.

  Additional information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-speech-recognition-to-operate-Windows-and-programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/tell-me-what-you-want-A-Beginners-Guide-to-Windows-speech-recognition

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.