Speed of sata for 2012 mini mac link only 3A negotiated Gigabit?

Similar Questions

• Adobe first/Media Encoder CC Crash when exporting video for ~ 25 min (Mac)

  Specifications of the laptop:

  OS X Version of El Capitan 10.11.4

  2.5 GHz Intel Core i7 processor

  16 GB memory

  Iris Pro 1536 Intel graphics card

  Problem:

  Adobe Premiere and Media Encoder CC constantly crash when I try to export the sequence of a project which is roughly ~ 25 minutes in length, H.264.

  The effects are used throughout the project, but only the base dissolves and black-and-white/contrast effects. Images comes from several sources, but all of the same mp4 file and type frame rates. There are also several PNG files in the Assembly, including the one I used to "frame" the movie to make it look more like images from other sources. Yet once, nothing complicated, not even a long dissolve (dissolved all is literally 2/24 frames in length).

  Split the video into sections and exporting separately are no problem, even when comparing a relatively short section of 4 minutes for a much bigger and more focused on the effects of section 11 minutes. Needless to say, I really, really, really prefer does not export this video into sections. The intended destination is youtube, and I just want everything in an own mp4, not two 12-minute videos.

  After some digging, I found similar problems reported on these and others and was especially deplore the possibility that my power supply is not large enough to cope, but it's still very confused. My MacBook is not 'stop', and as far as I could see, the Iris Intel Pro should have been sufficient even without a graph 5100 graphics adapter Pro 5200 or; as in the past I've already exported MUCH larger files, ranging from 35 to 85 minutes.

  solved by downloading latest driver for Nvidia CUDA for Mac - really just a problem with the Mercury playback engine. Guess OpenCL was not simply cut to get the type of work I was doing.

  Here is a convenient link to the latest CUDA for Mac drivers for all who encounter similar problems with export in Adobe Premiere Pro Media Encoder CC or CC: drivers CUDA for MAC Archive | NVIDIA

• Mini Mac starts only once

  Hello

  I have an old Mac Mini since 2006 with the following configuration: 1, 66 GHz Intel Core Duo, running Snow Leopard 10.6

  In recent months, it runs only once. I explain. If I shut it down, on reboot, I have Blue with grey wheel screen. I tried a lot of things: disc utilities, to change drive hard, fsck, verbose, single user,...

  Also, I thought it was something wrong with the last 10.6 update so I have not updated it but no, same problem

  The only solution, he works at each time reinstall Snow Leopard 10.6 from an external drive, it works perfectly... until the next stop.

  Does anyone have an idea on how to find (and fix) this problem?

  Thank you very much!

  Seems that something is corrupt some files while that lead, RAM? HARD DRIVE?

  1 insert the Mac OS X installation disc, and then restart the computer by pressing the C.

  2 when your computer has finished booting from the disc, choose disk utility from the menu of the installer at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)

  * Important: Do not click on continue in the first screen of the installer. If you do, you must restart from the disc to access disc utilitaire.*

  3. click on the tab clear.

  4. click on the triangle to the left of the hard drive icon to display the names of your partitions and hard disk volumes.

  5. Select your Mac OS X volume.

  6. Select the disk, select the partition, then type Format... Mac OS Extended journaled, click Security Options, choose zero data, erase, one pass... after I hope you can get a good installation.

• I need help to use my gateway as a monitor for mini mac 2011 2012

  OT: installation.

  I need help to use my gateway as a monitor for mini mac 2011 2012

  You should ask the community of Apple Mac

  Community: Mini Mac | Apple support communities

  Apple Mini DisplayPort to VGA adapter. Use: Use the adapter Mini DisplayPort to VGA to connect your Mac to a standard analog monitor, projector, or LCD that uses a VGA Connector or a cable. Compatible with: MacBook Pro (retina, 13-inch, late 2012) and later versions. November 11, 2015
  On Apple and cables - video cards Support Apple

• Mini mac 2012 drop ethernet connection

  2012 mac Mini i7, 16 GB RAM, 1 TB SSD. OS X 10.10.5.

  I have owned this since it was released in 2012 and have had no problems with it until a few weeks ago. There was no putting recent update of the OS or other additions s/w or the material that I could attribute to this issue.

  I noticed a few times a day, a notification is displayed that my wired ethernet is down, then back to the top. Originally it happened so sporadically, I simply ignored him. But yesterday it happened about 50 times in a row, up toward the bottom up toward the bottom up toward the bottom. Usually, when he finally reconnect, the interface would be to 100baseT rather than 1000baseT. Syspref is set on automatically configure.

  My home network has not changed during this period. My cable modem (Motorola SB6141) feeds a router Cisco (Linksys), which feeds an Apple Airport Extreme (latest generation) and another router (I have run two separate subnets, one for business, one for home). EI feeds a switch 8 ports that my Mac Mini is attached. I have reset the cable modem, Linksys, EI, and tried different ports on the switch... Note that no other machines on the network are strange network anomalies.

  I made a sure start yesterday and which seem to help for a while, but I noticed earlier the lights of the switch to the port of MacMini are orange instead of green, indicating 100baseT and of course, it is checked by the syspref config.

  Below is out of the console associated with en0 for today:

  20/02/16 8:19:45.000 AM kernel [0]: AppleBCM5701Ethernet [en0]: link down (inactive disabled womp, proxy)

  20/02/16 8:19:45.689 AM configd [51]: network modified: v4 (utun0:10.105.1.6, en0 -:192.168.11.83) DNS. Proxy - SMB-

  20/02/16 8:19:49.000 AM kernel [0]: [AppleBCM5701Ethernet] Ethernet: link up on en0, 1 Gigabit, duplex full, balanced-flow, Debug control [796 d, 0301, 0de1, 0300, cde1, 3800]

  20/02/16 8:19:51.173 AM configd [51]: network modified: v4 (en0 +:192.168.11.83, utun0) DNS. Proxy + SMB +.

  20/02/16 8:29:49.000 AM kernel [0]: AppleBCM5701Ethernet [en0]: link down (inactive disabled womp, proxy)

  20/02/16 8:29:49.279 AM configd [51]: network modified: v4 (utun0:10.105.1.6, en0 -:192.168.11.83) DNS. Proxy - SMB-

  20/02/16 8:29:53.000 AM kernel [0]: [AppleBCM5701Ethernet] Ethernet: link up on en0, 1 Gigabit, duplex full, balanced-flow, Debug control [796 d, 0301, 0de1, 0300, cde1, 3800]

  20/02/16 8:29:55.637 AM configd [51]: network modified: v4 (en0 +:192.168.11.83, utun0) DNS. Proxy + SMB +.

  20/02/16 9:40:19.000 AM kernel [0]: AppleBCM5701Ethernet [en0]: link down (inactive disabled womp, proxy)

  20/02/16 9:40:19.961 AM configd [51]: network modified: v4 (utun0:10.105.1.6, en0 -:192.168.11.83) DNS. Proxy - SMB-

  20/02/16 9:40:24.000 AM kernel [0]: [AppleBCM5701Ethernet] Ethernet: link up on en0, 1 Gigabit, duplex full, balanced-flow, Debug control [796 d, 0301, 0de1, 0300, cde1, 3800]

  20/02/16 9:40:26.216 AM configd [51]: network modified: v4 (en0 +:192.168.11.83, utun0) DNS. Proxy + SMB +.

  20/02/16 9:41:44.000 AM kernel [0]: AppleBCM5701Ethernet [en0]: link down (inactive disabled womp, proxy)

  20/02/16 9:41:44.327 AM configd [51]: network modified: v4 (utun0:10.105.1.6, en0 -:192.168.11.83) DNS. Proxy - SMB-

  20/02/16 9:41:47.000 AM kernel [0]: [AppleBCM5701Ethernet] Ethernet: link up on en0, 1 Gigabit, duplex full, balanced-flow, Debug control [7949,0021, 0de1, 0300, 0000, 0000]

  20/02/16 9:41:48.000 AM kernel [0]: AppleBCM5701Ethernet [en0]: link down (inactive disabled womp, proxy)

  20/02/16 9:42:01.000 AM kernel [0]: [AppleBCM5701Ethernet] Ethernet: link up on en0, 100 megabits, duplex full, balanced-flow, control Debug [796 d, 0301, 0de1, 0300, 4de1, 0000]

  20/02/16 9:42:03.324 AM configd [51]: network modified: v4 (en0 +:192.168.11.83, utun0) DNS. Proxy + SMB +.

  09:42 the link changed from 1 Gigabit to 100 megabits, but I do not see why. Any ideas on what is happening in the console log? Logic board issue? Others?

  I did not see 'change the cable. Have you tried? The cable between your router and your switch?

  Cable of your mini directly your main router, or modem without going through the rest of your network?

  Do you have any activated energy saving settings?

  You have a lot of variables and breaking points in your system. Difficult to isolate what's going on.

• Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  If you have another Thunderbolt cable, plug it into the unused port on the

  Thunderbolt Display and then in the Mini and see if the same thing happens.

  What you can see is a precursor of the poster, built out of the cable.

  At least, it could eliminate a costly repair problem.  Although the cable itself is not

  expensive, opening to the top of the screen of TB to replace could be.

  Well that not connected on a Mini, I began to see in similar behavior my

  iMac, so that there was finally a break in the complete cable.

• You can use old iMac as a monitor for mini Mac

  You can use 2008 iMac as a monitor for mini Mac?

  No, because the iMac of 2008 not display entered or supported to do so.

  See > use your iMac as a display with the target - Apple Support Display Mode

  You can use a connection network and something like ScreenRecycler

  See > https://www.screenrecycler.com/ScreenRecycler.html

  However, the best bet is to use a regular external monitor with the Mac Mini.

• MSDS for battery PRAM mac mini

  Hello

  I'm trying to find the signage plug for battery of mac mini.

  So far, the technical background paper only I found online is the following:

  http://images.Apple.com/legal/more-resources/docs/Apple-product-information-Shee t.pdf

  It seems that the mac mini is the only Apple product are not not in the document.

  Apple is there an explanation for that?

  Is there a way to find this information online?

  Thank you

  E.

  Use of Apple a BR2032 which is similar to the CR 2032 and the CR can be used but has a shorter life.

  MSDS for BR2032

  http://www.datasheetarchive.com/BR2032%20MSDS-datasheet.html

• Looking for HP Mini 110-1109NR SATA drivers

  As shown in the topic, I'm looking for HP Mini 110 - 1109NR SATA drivers.  Installing windows XP on the computer broke down and needs to be reinstalled, but when you use an optical drive USB installation fails to find the HD installed.  A quick response would be much appreciated!

  Hello:

  Download the second file listed.

  Extract on a USB floppy and press F6 when you are prompted to install the SATA/RAID drivers or integrate the drivers in a copy of your XP installation disc.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=20625&keyword=%22F6%22&lang=eng

  The specific ACHI driver you need for your laptop computer is the Intel(r) ICH7M/MDH SATA AHCI Controller.

  Paul

• A Mac Mini laptop - link the keyboard and Trackpad?

  I get a laptop, but also want the option of using a Mac Mini with it. It has an HDMI port, so I think I could plug it into the Mac Mini, but the keyboard and the Trackpad would also connect?

  What yo mean by 'I get a laptop but also want the option of using a Mac Mini with it. It has an HDMI port, so I think that I could plug into the Mini Mac'.

  You cannot connect two computers via their HDMI output ports.

  A laptop Mac does not support the display of the target mode

  Use your iMac as a display with the target - Apple Support Display Mode

  You can use screen sharing via a network of control/use a Mac by another Mac.

  http://www.macissues.com/2014/05/07/how-to-set-up-and-use-screen-sharing-in-OS-x /.

  Everything you want to accomplish?

• Ask for help upgrade (Mac Pro early 2009 2x2.6 GHz Quad-Core)

  I am a videographer who has need to bring my Mac Pro from the dead. Cheesy with video files, but not parts of. My reading so far led me to look at in what follows. I'm looking for a better understanding of each of the following items and upgrades are beneficial and worth that may be too kill for a round of aging.

  1. Memory. I currently have 4x2gb or total of 8 GB of ram. I know this is ridiculous, I have not increased by at least 16 GB so far. However, I have read that memory can only help so much and that some of the items here are actual speed thrusters. How much memory is recommended for this configuration? Should I buy? http://www.Amazon.com/16GB-DDR3-1066-PC3-8500-1066Mhz-Apple/DP/B0098MLFJG/
  2. Solid State Drives. I currently have 3 disks internal thatrange of 500 GB to 2 TB. If I used that as my boot drive, where is the best place to install (see photo below)? I read of people installing in a Bay SATA HDD or SATA optical drive unused. I read good things about it. http://www.Amazon.com/Samsung-2-5-I...p/B00OBRE5UE/ref=cm_cr_pr_product_top?IE=U TF8
  3. Video/graphics card. First of all, both mean the same thing? Are the belowonly of slots PCI Express 4 for this type of card? Also, can you have two installed? I have the NVIDIA GeForce GT 120 512 MB series. What is the best way to upgrade? My research so far has led me to the GeForce GTX680. Looks like I'll have to buy it was good. T7ZS http://www.Amazon.com/EVGA-GeForce-DisplayPort-Graphics-02G-P4-3682-KR/DP/B00C81
  4. Processor upgrade. I'm intimidated by it due to intensive installation and prices. What would be the next best bet - upgrade to 12-core? Where to buy?
  5. Firmware? I've seen videos and forums on (4.1 - I) (5.1) or (6.1). I don't really understand what that means. Should I be concerned?

  

  Thank you!

  -The fastest drive is a blade of base PCle SSD. Very very fast

  The SSD to 'Classic' Mac Pro training

  -The bus SATA on the Mac Pro is only SATA II (3 GB/s) and connected to the bus SAT SSD is therefore limited to speed SATA II, not the speed of current SATA III (6 Gbps) drives.

  -You can get cards PCle who accept the standard SATA SSD and who can get speeds of SATA III

  -You can install several graphics cards. I have my 2009 MP, I have the original GT120 in slot 2 and a 5770 PC card into slot 1 (slot width double only).

  A graphics for PC cards will not display anything while booting, as well as an installed PC card can be used for the Startup Option or special start-up as recovery mode.

  For more information on graphics cards:

  Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)

  http://www.macvidcards.com/index.html

  http://forums.MacRumors.com/showthread.php?t=1440150

  -J' would upgrade not processors. Frequently reading and writing to disk is the bottleneck.

  About the firmware, you can update the firmware of the 2009 to 2010 MP. Which allows the use of faster memory, using a processor six cores and audio mini displayport for the graphics card offline

• EtreCheck - slow 2012 Mini 10.11.3 results

  Aside from the RAM is a little low I don't know what could be the problem. The real memory usage is usually low on this machine and it worked fine for a while after the upgrade to El Capitan, so I would like to first explore other possible solutions.

  EtreCheck version: 2.9.9 (260)

  Report generated 2016-03-07 17:55:28

  Download EtreCheck from https://etrecheck.com

  Duration 15:11

  Performance: Poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Very slow performance, but the memory usage is normal

  Hardware Information: ⓘ

  Mac mini (late 2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  Mini Mac - model: Macmini6, 2

  1 2.3 GHz Intel Core i7 CPU: 4 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: unknown

  Video information: ⓘ

  Graphics Intel HD 4000

  SONY TV * 02 1920 x 1080

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - since startup time: less than an hour

  Disc information: ⓘ

  HTS541010A9E662 disk HARD APPLE disk0: (1 TB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  BootyBoot (disk0s2) /: 999,35 go-go (795,48 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  Receiver IR of Apple, Inc..

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Western Digital my book 1130 2 TB

  Giant (disk2s1) / Volumes/giant: 2,00 (1.19-free) tuberculosis

  Western Digital my book 1130 3 TB

  disk1s1 (disk1s1) < not mounted >: 210 MB

  Boot OS X (disk1s3) < not mounted >: 134 MB

  (DIS3) backup / Volumes/Backup: 3,00 TB (791,95 GB free)

  Encrypted AES - XTS unlocked

  Basic storage: 3,00 TB disk1s2 online

  Scope of Mitsumi Electric Hub in Apple USB keyboard

  Logitech USB optical mouse

  Mitsumi Electric Apple Extended USB Keyboard

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [loaded] 6 tasks Apple

  [loading] 160 tasks Apple

  [operation] 70 tasks Apple

  Launch system demons: ⓘ

  [loaded] 41 tasks Apple

  [loading] 156 tasks Apple

  [operation] 90 tasks Apple

  Launch demons: ⓘ

  [ongoing] com.Apple.ServerD.plist

  [operation] com.backblaze.bzserv.plist (2015-12-25) [Support]

  User launch officers: ⓘ

  com.Apple.serveralertproxy.plist [loading]

  [operation] com.backblaze.bzbmenu.plist (2016-03-07) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

  [operation] com.pia.pia_manager.plist (2016-02-14) [Support]

  Items in user login: ⓘ

  iTunesHelper hidden Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Hidden dyn Updater Application (/ Applications/Dyn Updater.app)

  Reflector 2 hidden UNKNOWN (missing value)

  Plex Media Server hidden Application (/ Applications/Plex Media.app)

  FreshBackMac UNKNOWN (missing value)

  WallpaperWedensday hidden UNKNOWN (missing value)

  Other applications: ⓘ

  [ongoing] com.behance.Wallpaper.18272

  com.behance.WallpaperLaunchHelper [loading]

  [ongoing] com.dyn.Updater.289312

  [ongoing] com.etresoft.EtreCheck.19232

  [operation] com.openssh.sshd.16737CE5 - 531-4839-910F-A56C981C2E63

  [ongoing] com.plexapp.plexmediaserver.274912

  org.CalendarServer.agent [loading]

  org.CalendarServer.archive [loading]

  org.CalendarServer.relocate [loading]

  org.Postfix.master.passive [loading]

  [loading] 434 tasks Apple

  [operation] 197 tasks Apple

  Plug-ins Internet: ⓘ

  Default browser: 601 - SDK 10.11 (2016-01-19)

  QuickTime Plugin: 7.7.3 (2016-01-19)

  3rd party preference panes: ⓘ

  Backblaze backup (2015-12-25) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Automatic backup: YES

  Volumes to back up:

  Giant: Disc size: 2.00 TB disk used: 805,92 GB

  BootyBoot: Disc size: 999,35 GB disc used: 203,86 GB

  Destinations:

  Backups [Local]

  Total size: TB 3.00

  Total number of backups: 44

  An older backup: 02/01/16, 12:29 AM

  Last backup: 07/03/16, 13:21

  Backup disk size: too small

  Backup TB 3.00 size < (disc 1.01 TB X 3)

  Top of page process CPU: ⓘ

  70% sdmd

  9% postgres: _xserverdocs serverdocs [local] UPDATE waiting (63)

  7% ScreensharingAgent

  7% kernel_task

  6% WindowServer

  Top of page process of memory: ⓘ

  Bztransmit 705 MB

  487 MB postgres: _xserverdocs serverdocs [local] UPDATE waiting (63)

  Kernel_task 481 MB

  Mdworker (27) 356 MB

  74 MB Google Chrome

  Virtual memory information: ⓘ

  27 MB of free RAM

  3.96 GB used RAM (1.13 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  March 7, 2016, 17:33:03 self-test - spent

  Standard users cannot read/Library/Logs/DiagnosticReports.

  Run as an administrator account to view more information.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Mini Mac - exchange of hard disks

  I have two mini Mac - the two 2012.

  Mac mini #1 is i7 2.6 GHz Quad Core - my first desktop computer

  Mac mini #2 is i3 2.3 GHz Dual Core - used as HTPC / Media Server

  #1 has (2) 1 TB disks, which I use a lot less than half (I also have external drives)

  #2 a (1) 512 MB internal drive, which is almost complete

  I plan to (1) move the 1 TB drives from #1 to #2 and move all data (mainly from the iTunes music ALAC and some iMovie video), that would solve the question of space. While they are open I consider also adding an SSD as the diskette of starting to #1, this would improve the startup time, run certain programs a little faster and a 256 MB or 512 MB disk would be inexpensive, that I would win a little more than space for data too. (to be honest, the Mac mini is jealous of the SSD in my MacBook)

  I've increased the RAM to #2, replace a switch of volume on a 3 g iPhone and replaced a screen on an iPad 2, so I'm not afraid of detail work - but only the RAM was easy. I also watched the videos on the replacement of a HD for this model on iFixIt. What is not clear is how much more difficult it is to make the first record as the second. If I move just a reader I wouldn't have to dig in the 1st Bay.

  So, my questions:

  (1) how can I say on the report system which drive is in the Bay, by whom I have which is on top, which is at the bottom? Or can I assume that the startup disk is always on top? (harder to do)

  (2) is the player in the upper Bay of much more difficult to replace?

  (3) I would also examine suggestions for a reliable SSD, but this isn't the substance of my question.

  Thanks for your help...

  Here's a video OWC on how to add a second drive to a Mac mini (same steps for 2011) 2012. I bought their data Doubler kit (and the extra ribbon cable) so that I would have the tools to get the job done right. Seen their detailed video while performing the surgery. I bought a 128 GB OCZ Vertex SSD (now a division of Toshiba and new product name VT180 series) for main and kept startup disk the Apple 512 GB of disk in place. The OCZ Vertex is fast and reliable for fall 2011.

• Missing originals after copying photos for a new mac external HARD disk library. How to fix this?

  Move the library of photos hosted on an external HARD during a new mac disc.

  I can open the app and import new pictures, but I can't change any of my previous photos because he complains that the original is not found. The "Use as system library" button is gray which implies that the current library of photos on the new mac is defined as the system library.

  I still have access to the external HARD drive that I imported a couple hundred new photos for the new mac.

  How can I fix?

  How did you set up your library.  You use a library "referenced"?

  

  If Yes, then you have lost the links with the original files.

  You have the iCloud library enabled in the preferences of the iCloud photo Panel?

  

• 8 GB DIMM modules for early 2008 Mac Pro

  I see that OWC is now selling the 8 GB DIMMs for early 2008 Mac Pro (8-core, 3.2 GHz). This leads to the potential total RAM up to 64 GB.

  Anyone has any experience of the use of these, or potential problems?

  Thank you!

  I would call OWC and ask them. I remember not only here posts on this topic.

  However. I myself would buy a chance 2009-2012 in the place and level it. These Mac Pro are the most capable and reliable and 8 GB sticks are 1/3 of the cost of those of 2008.