SPI Vista
I had to use my Vista recovery disk. I have installed all Windows updates. He says of them successfully installed verybody. I even checked the list of updates, and each of them said "successful!" But SP1 seems to not be installed... it does not show on the start... Computer... List of properties of the basic information about my computer and my computer would not allow me to install SP2 because it said that SP1 is required! So what happened? No help from Microsoft, such as Support for Windows Vista Service Pack 1 (SP1) ended July 12, 2011. If I'm stuck? SP1 no longer appears on my list of updates to be done, and I've tried several times to install SP1 from the download page of Microsoft without success!
You can also try asking in the Windows Update forum.
Good luck.
Tags: Windows
Similar Questions
-
I have a Fujitsu with Windows vista by Windows defender. My provider is Talk Talk and they provide secure F. My! St question is do I really both.
This time Defender tells me everything is going well. But sure F tells me "from viruses and spies malfunction' when I took the road that I am not able to turn it, if I click on tour, nothing happens and the alert does not go far. All of the suggestions.
* original title - confuses security *.
Windows Defender is the base defense that is provided with Windows. This is where if you have the defense long enough to get a real anti-virus program. If nothing else you should get Microsoft Security Essentials for free here:
http://www.Microsoft.com/en-CA/security_essentials/default.aspx
It will offer a lot more security than the Defender.
I also recommend getting (also free) malwarebytes from www.malwarebytes.org who is a good anti-malware for the MSE scanner may not be able to find little things.
-
I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.
After you run the system update readiness tool, I found the following errors in my CheckSUR.log
=======================================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-10-09 19:13Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
Control components store
(f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
(f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3eSummary:
Seconds executed: 1221
Found 2 errors
CSI shows lack Total count: 1
CSI Payload file lack Total count: 1Unavailable repair files:
winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest=======================================================
The newspaper CBS.log itself has several types of mistakes, too. Here are some samples:
-Errors 'M²;
2009-10-09 21:10:27, info CBS SPI: from SPInstall
2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper. Continue without. HR: 0 x 80070020
2009-10-09 21:10:27, info CBS SPI: wave 0 detected
2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
2009-10-09 21:10:27, info CBS SPI: spent before due diligence
2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
2009-10-09 21:10:27, info CBS SPI: M² is not included in
2009-10-09 21:10:27, error CBS could not initialize wrapper M²
2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value-"Could not find the CixTarget Molok" errors.
2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109-"ILLEGAL_CHARACTER" and more "Sqm" errors-
2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
[gle = 0 x 80004005]
2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
[gle = 0 x 80070246]
2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4
2009-10-09 21:30:26, information CBS Exec: comprehensive treatment. Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized. Reboot required: no
2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized. Reboot required: no
2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized. Reboot required: no
2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface. HR 0 x 80070246
2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
2009-10-09 21:31:41, error CBS didn't M² value for parameters
2009-10-09 21:31:41, error CBS failed to set exit code value M²
2009-10-09 21:31:41, error CBS didn't M² for the SKU value
2009-10-09 21:31:41, error CBS doesn't have the m value for the build number------------------------------------------------
I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.
Any help that can be provided would be greatly appreciated.
1 person needs an answer
For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...
After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up. But overall these problems were minor compared to it, that I lived just to fix some missing files.
-
Impossible to install Vista updates
I use Vista 32 bit, family premium, SP1, latest installed update is KB955430. Download and install the updates seem to work - until the moment where my system wants to "configurations". Here, the system stops and removes the installed updates.
What I've done so far:
-Tried to install SP2 - no success
-Tried to install the file "MicrosoftFixit50202.msi" - with no success
-Tried to install the file "au_check_v78f.exe" - no success
-Follow all the steps (manually, too) of http://support.microsoft.com/Default.aspx?scid=kb%3ben-us%3b971058&x=10&y=4 - unsuccessfully
The 'CBS log.zip' file indicates a missing file without saying which file it should be.
It makes me crazy... Please advice what else should I do to install the latest Vista updates successfully. Thank you very much.
Hello
the command
wevtutil.exe cannot read certain registry values:
SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP2
Sp2 also fails to check the installed (Service Pack
2010-02-10 18:27:04, error CBS SPI: (SPCVerifyTrust:1732) could not CryptCATAdminCalcHashFromFileHandle GLE = 0 x 57
2010-02-10 18:27:04, info CBS SPI: installed SPInstall or XML not approved. It continues with the current version).
The checksum of the SP2 cab file also fails, so the expandition fails)
(CSelfExpander::InternalExpandFile:382) Checksum of the downloaded file (0x95a57df7) does not match expected (0xef7dc8a4) er = 0xd
2010-02-10 18:29:51, error CBS SPI: (CSelfExpander::ExpandFiles:227) Interior cannot expand file Windows6. 0 - kb948465 - X 86 .cab hr = 0x8007000d)
Download and run the preparation tool for Windows Vista (KB947821) system update. He's trying to fix the problems, which may prevent you from installing Sp2 and other updates. This tool generates a checkSUR.log file C:\Windows\Logs\CBS. Open it and see if there are still questions that cannot be resolved.
Do a start-up in minimal mode and tr to install Sp2 it. Perhaps other tools to block installation of the Sp2.
André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Impossible to install Vista Service Pack 2 (0x80070005)
Hi, I tried to install SP2 on my current Vista Home Premium SP 1. However, no matter what I try, I receive the ERROR_ACCESS_DENIED. And I tried several ways, including:
System Update Readiness Tool v4, and v7, then remove Windows Update files, reinstalling windows update, check the COM security settings, run as "Administrator" etc.I can't make it work! I have attached the portion of my cbs.log newspaper:
2010-03-09 11:49:10, info CSI CSI 1247136 (0x001307a0) store initialized 00000005
2010-03-09 11:49:10, CBS Session info: initialized 30064552:1896269760.
2010-03-09 11:49:11, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
2010-03-09 11:49:11, CBS information session: 30064552:1896269760 finalized. Reboot required: no
2010-03-09 11:49:11, CBS briefing: initialized 30064552:1902821760.
2010-03-09 11:49:11, error CBS SPI: (CSPICbsClient::EnumPackages:63) Impossible to enumerate CBS packages hr = 0x80070005
2010-03-09 11:49:11, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list, hr = 0 x 80070005
2010-03-09 11:49:11, CBS information session: 30064552:1902821760 finalized. Reboot required: no
2010-03-09 11:49:11, info CBS SPI: could not enumerate the packages CBS
2010-03-09 11:49:11, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x80070005
2010-03-09 11:49:11, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2-KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005 hr = 0 x 80070005 store
2010-03-09 11:49:11, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:700) did not make an analysis of the applicability of the SP bound for package Windows6. 0-KB955430 - x 86 .cab hr = 0 x 80070005
2010-03-09 11:49:11, error CBS SPI: (CSPInstall::CompatibilityApplicabilityScan:1056) failure of verification of the applicability of the tasks of HR = 0x80070005
2010-03-09 11:49:11, info CBS SPI: scan ending Compatibility\Applicability
2010-03-09 11:49:11, error CBS SPI: (PerformSPInstallation:764) cannot install MS using IU hr = 0x80070005
2010-03-09 11:49:11, error CBS SPI: (wmain:1059) could not run SP installation hr = 0 x 80070005
2010-03-09 11:49:11, info CBS SPI: event reports failed
2010-03-09 11:49:19, info CBS SPI: SPInstall terminating, return code 0 x 5Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).
Please check that you are logged into an account with administrative privileges.
Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.
2. save the zip on your desktop and extract the file:
-Right-click on the file and select extract all...
-Click Next when prompted for the Destination.Therefore, you should see a folder called AccessChk on your desktop.
3. open the folder AccessChk
4 press and hold the shift key and right-click in the window. Select "open here command prompt.
5. a command prompt window should open a similar message:
C:\Users\\Desktop\accesschk > 6. type the following command and press ENTER:
"" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
Tip: You should be able to copy and paste the command into the command prompt.7. close the command prompt window. Open the Accesschk folder on your desktop (if it has been closed).
8. double-click on Accesschk.txt (text file), it should open Notepad.
If this is insufficient,
1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
SubInACL (SubInACL.exe)
2. go to your desktop and double-click on the downloaded file.
3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
5. copy the following commands, and then paste them into the opened Notepad window:
off @echo
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
@Echo =========================
Completed @Echo.
@Echo =========================
@pause
6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
8. you will see a window of type BACK treatment.
NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.
Look for updates after that.
Hope this information is useful.
This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.
From: Microsoft Answers Support Engineer
http://social.answers.Microsoft.com/forums/en-us/vistawu/threadsTaurArian [MVP] 2005-2010 - Update Services
-
Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100
Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100
Cannot install SP2 (KB948456 - X 86) on a laptop Vista Home Premium 32 bit SP1 with all updates of Windows installed. Quickly fails after it starts with error 0x800b0100 in the system log. It's a fully verified SP2 full download. I did a full chkdsk /r who fixed some issues. Removed AVAST. A running Fix It tool that fixes the problem with crypt services. Scanned for malware with MRT. Scanned for malware with MalWareBytes. Scanned for rootkit with the McAfee tool. Run the sfc/scannow, that signals mistakes. The CBS. Partial contents of the LOG file (see KB972036):
2014-03-18 11:59:36, CBS NonStart info: success, start, treatment not required, as expected.
2014-03-18 11:59:36, info CSI CSI 3222024 (0x00312a08) store initialized 00000005
2014-03-18 11:59:36, CBS Session info: initialized 30360259:262197728.
2014-03-18 11:59:37, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
2014-03-18 11:59:37, CBS Session info: 30360259:262197728 finalized. Reboot required: no
2014-03-18 11:59:37, CBS Session info: initialized 30360259:266957728.
2014-03-18 11:59:38, CBS brand store corruption flag because of package info: Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0. HR: 0x800b0100
2014-03-18 11:59:38, error CBS SPI: (CSPICbsClient::EnumPackages:156) cannot open the package hr = 0x800b0100
2014-03-18 11:59:38, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list hr = 0x800b0100
2014-03-18 11:59:38, CBS Session info: 30360259:266957728 finalized. Reboot required: no
2014-03-18 11:59:38, info CBS SPI: could not enumerate the packages CBS
2014-03-18 11:59:38, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x800b0100
2014-03-18 11:59:38, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2.KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18005 hr = 0x800b0100 store
System will not install KB972036 - States does not apply.
Referring to 956702 KB notes that the http://go.microsoft.com/fwlink/?LinkId=167357 link that needs 32-bit is 64-bit. In addition, it specifies SP2 - which obviously I do not have. But I manually downloaded the apparently correct tool and ran it - get does not apply.
Hi John,.
Apologize for the delay in response. Please try the steps as described in the following article:
Back to us for assistance.
-
Vista unbootable - PAGE_FAULT_IN_NONPAGED_AREA
Dell inspiron 1525, bought in 8/08. My nieces and had not started since 5/09. Does not start normally, safe mode, all computer fix of good options last known date. I have the Dell reinstallation DVD and disabled each startup option in the BIOS but the optical drive. It starts loading and then when load goes directly back to BSON - I can't even boot with the dvd and all options the other boot off. BSOD indicated above with the following details:
NTFS.sys
PAGE_FAULT_IN_NONPAGED_AREA
STOP: 0 X 00000050, 0X00000000, 0X882D408A
NTFS.sys - address 882D408A base at 88204000
47918a 96 datestampThe story is that I got this because she has lost the power cord and battery drained and she said she had "problems" - no details and do not ask a 20-year-old. I upok TI started and everything worked except for a bunch of boot errors (Delldock has stopped working, wireless tray stopped working and others). Understand that these may have been caused by additional Dell free trial software or perhaps spies/virus software. She had Defender and no antivirus. Also, he had 52 Windows updates pending (recommended) and 3 (option). I hit update and ran a few hours and froze. I turned off and restarted and thought maybe a virus problem and load of F-Secure (from my ISP) and spyware doctor and ran and no real problems. So, I'll stop, rebooted, set the automatic updates to run daily at 1:00, woke and it would close down with running updates (was on 2 of 4) is home from work 11 hours later and always on 2 of the 4. My patience tried me and I turn it off. Able to reboot and there were only 6 Microsoft updates. Read a Dell thread that Delldock causes all kinds of problems with the pop-up windows and cutting programs I went into the Panel and struck to remove it. Ran a few minutes and froze and went to blue screen and made a sort of receiving data. Then the unbootable condition above. As said, I can't get any type of shoe to do anything, even to a resettlement drive. I'm not very computer smart and very uptight. Suggestions?
Hello
You have the CD/DVD in 1st in the boot order? (not only have others disabled).
That error is the most often material and because it will be not boot from the Vista disc, which are pretty
much confirmed. Try changing the memory in and out. For anything else, you will need technical support
a real computer store (no leeks or pointed to a BestBuy or other BigBox stores) or Dell
Supported. Could be a new hard drive is necessary but there could be other systemic causes.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/ Rob - bicycle - Mark Twain said it is good. -
SPI, C#, C++, PC
Hello
I wondered if there is a way to use the SPI (Serial Peripheral Interface) of the computer in c# or C++. Next to it is the bus system the use of sd and mmc cards. There is a way to do it on .net Micro Edition, but I have not found anything on the PC. The driver of the SPI interface is calles sdbus.sys can there is a way to use it?
Thanking you
Soitis
http://social.msdn.Microsoft.com/forums/en-us/vcgeneral/threads
Try to post in the Forum above.
It comes to the Installation of Vista instance.
See you soon.
Mick Murphy - Microsoft partner
-
I installed Palm Desktop on my Vista Home PC using my admin account. During the installation all my data was hotsynced in the admin folder.
Now, when I run Palm Desktop I have no access to the admin folder. And curiously HotSync runs as an admin for I can 'sync' the device.
So my question is what is the appropriate means to install or use it so that "ordinary" users can access their own devices/files without becoming admins?
Manual glosses on this saying of problem just follow the instructions.
Piotr
Hello pazhk and welcome to the forums of Palm.
You must add your Windows account to the Administrators group in Windows. You will be granted the same privileges as the administrator account. You will need to make this change, when logged in as an administrator. When you log on as yourself, you will have the role of high security in Windows.
Now go to a head, and reinstall Palm Desktop and HotSync your Palm on your computer. If you wish, also install some third party applications or conducted HotSync and HotSync again to make sure that everything works.
At this point, you can either the role of high safety level in place or you can revoke. Personally, I have it reverse as more every day do not require you the level of security which ensures the role of admin computing needs. Revoke the security role also makes your computer less vulnerable to spies, virus software, etc.
Alan G
-
Music from Apple on Windows Vista
Hello
I want to subscribe to Apple music etc, but the upgrade will not take effect, apparently due to the fact that my laptop running Windows Vista. Of course, this is not normal? How can I subscribe to the Apple's music on the Windows Vista system without being forced to invest in a costly upgrade of my operating system?
Hello
You cannot use Apple music on Windows vista. iTunes 12.3 or later is required for Apple music. If you want to use Apple music you need to update your operating system (computer?).
Jim
-
This worm is working great for years. Suddenly, Gmail could not accept my sign-in. I have auto day together in Thunderbird, but it won't go past worm 15. Only after that I changed the setting in Gmail to enable low security Gmail applications would allow me in my emails via Thunderbird. I could connect to Gmail via the web very well, but not via Thunderbird. Could this be a problem with Vista?
Thank you
RichardThen I tried to configure server authentication to "OAuth2" method, but this option was not available. in the drop-down list.
"OAuth2" only works for IMAP accounts. For POP "Normal password" is required, either in "allow applications that are less safe" or authentication step 2.
You can set if "OAuth2' for SMTP server outgoing.
When your problem has been fixed can you mark the thread as "solved" Please?
Thank you. -
I am moving from Vista to Firefox and want to know if Microsoft Essentials will continue to run after I made the change. MSE has preformed well for many years and I would like to avoid having to change to another anti-virus program.
Actually, you will still have Windows Vista, even if you use Firefox rather than the browser Internet Explorer (IE) that comes with Windows.
Another browser of your choice requires no modification of your security software. Also, it does not replace your security software. Unlike some programs that require special configuration steps, Firefox and Microsoft Essentials should get along very well.
-
Whenever I have download and install the vista security updates I lose Mozilla Firefox. The program and the icon still exist but do not respond. By clicking on the icon or clicking on the program files does produce absolutely no response.
So any time I install updates, I have to run internet explore and firefox redownload. Most annoying. Help.
P.S. Yes, firefox is my default browser.Some problems occurs when your Internet security program has been implemented.
trust the previous version of Firefox, but not more acknowledges your
update as being approved. Now how do I solve the problem: to allow
Firefox to connect to the Internet- Make sure your Internet security software is up-to-date (for example, you are using the latest version).
- Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see
Configure the firewall so that Firefox can access the Internet. {web link}
-
Windows Vista->; Windows 10
Hello.
I have a problem with my Windows Vista to Windows 10 computer upgrade.
Microsoft has said that it cannot obtain free Windows 10 update, if you have Windows 7/8.1, but you should be able to get on Windows Vista, I think...When I open the installer of Windows 10, or media creation tool, that's what's happening:
10 Windows Installer:
http://S12.postimg.org/yfzwn33l9/bandicam_2015_09_24_22_24_13_724.jpgMedia creation tool:
http://S18.postimg.org/u0y5u23eh/bandicam_2015_09_24_22_25_17_734.jpgMy computer specs:
http://S17.postimg.org/uoyp0rqqn/bandicam_2015_09_24_22_29_56_298_censored.jpg
Can you please help me to get 10 Windows on my computer.
This isn't a problem of Firefox support. Take up with a ten Windows support forum.
http://www.tenforums.com/ -
thundrbird x 64 bits installation dosen't work in vista x 64 final Greek SP2
Used the side
http://www.M64.info/index.php/Thunderbird-64-bit-download
to download x 64 bit thunderbird for my x 64 vista ultimate sp2 Greek and installation claims that I did not have vista x 64! Anyone know how this problem can be solved?
I even used the side
http://FTP.Mozilla.org/pub/Thunderbird/nightly/2015-08-27-03-02-11-comm-esr38/
the result is the same installation claims that I did not have vista x 64 and in the image, I download you see I have sp2 genuine vista ultimate x 64 Greek.
In the end, I use firefox 38.2.0 john99 suggest to me and IF they meet me build nigtly about this bug I'll see what I can do the case is closed
Maybe you are looking for
-
The question of the location...
is it possible for a person to be the purple pin and show that they are in the red pine? With the help of an iPhone 5. This seems really off to me even if the person is 23 floors up?
-
Cant' boot with boot camp after resizing partition OSX
How to resize my bootcamp partition without deleting chtol I should have seen all the answers before I do it myself After resizing main partition by 10 GB, I couldn't reboot with windows7. My mac has been set to boot with windows and when I boot the
-
ISM7411 Ethernet Streaming Protocol
I need to control ISM - 7411 Ethernet Stepper Motor with orders streaming of Ethernet.I tried to find documentation on this subject, but without result.ISM-7411 use a standard protocol and this he-what?Is there a manual to explain all the commands th
-
Hi all I'm trying to recycle my set OCR file in LabVIEW. Basically, I show the reading string to the user and in case something goes not the respective character must be corrected in the charatcer set file, according to the text entered by the user.
-
start-up and other icons that were on the bar tasks now are to the right of the screen
bar (at the bottom of the screen) the task that has the Start button and other icons, all are now appearing to the right of the screen