Spilled Coke, not too loud low speaker

Similar Questions

• Seem much too loud on speaker bt (Harman/Kardon Onyx Studio)

  Today, I noticed that I have this problem: https://talk.sonymobile.com/t5/Xperia-Z1-Compact/Bluetooth-volume-too-loud-volume-step-1-is-silent/t...

  but on my bt speakers.

  A fine when last tested a few days ago.

  My shouts of speaker Karbon Onyx of pain now, even at low volume (except 0 when his silence as in linked the problem above), while the sound on my sony mdr-as800BT seems fine. Have not tested in my car.

  I think I have all kind of problems with this phone (z3), this volume

  Hmm, at least I thought I did the morning when I noticed the problem, I wonder if I forgot to restart?

  Re-pair once again and after some time he worked as it should. Although first-time departure walkman oumayma pairing it was high volume, then somehow, it was ok next time.

  Thanks for your time

• speakers are not too strong

  I have a pavilion dv6, with operating system windows 7. My problem or the problem is that my computer's sound volume is not too loud. in others, it feels like it needs more amplification. When the volume is set to 50%, the speakers do not produce a lot of volume.  Anyway is to amplify the volume so that 50% speakers produce her more?  I hope so. I hope I'm making sense.

  Hello

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• Satellite R630-155 - fan is too loud and SSD update

  I am the owner of a Toshiba Satellite R630-155 (Core i5-480). My problems are:

  1. the fan is too loud and never stops. In normal operation (navigation and General Office work) there is a constant high pitch noise which is audible three to four meters in a desktop - high load environment, you just can't take it anymore! The fan never stops... even when you do nothing...

  2. the heat is a big problem. The bottom of the laptop is overheated constantly and I have to place on my desk so that the lower left corner is outside the table, so it can breathe fresh air from below - otherwise, the temperature rises and the (noisy) fan is unable to follow. When I work with the laptop sitting on a couch, I place a thick book between the laptop and my legs. The book must be thick (more than one inch) with hard covers, otherwise the heat going through the book!

  3. last (but not least, I will mention the biggest problems here) that's the problem with the installation of the SSD. I bought a used Corsair F80 (80 GB SSD) from a friend, but I was unable to use it with the Toshiba - BIOS not detect the disc. I tried to install all the latest updates for portable and SSDS but I had no success. Then I put the disc and I bought a brand new Zalman 128 GB SSD (SSD0128N1 Sandforce) but I had exactly the same problem. I contacted my local support Toshiba and after much conversation, the only answer I got is that the laptop is not compatible with these SSDS, and it is acceptable by Toshiba and not their problem. They told me that if I need an SSD upgrade I cannot go for the Toshiba SSD that is installed on the portege series, which is sold by Toshiba for a ridiculously expensive price - about $500 for 128 GB. I contacted the European support center and I got the same exact answer. I searched the Internet and found someone else with exactly the same problem with a Corsair 128 GB SSD - he concluded that the laptop detects the SSD after ten to twenty resets. I tried and it was true - after a lot of restarts the detected disk Zalman laptop and I was able to successfully install Windows 7, but the process is unacceptable. Also the drive is rated by the sites official at the speed of an OCZ Vertex 2 128 GB (and a little better), but when I ran a cue point in the Toshiba, the results I got were less than half of the advertised speed. Same reference in another machine of the same disc, resulted in the announced speeds.

  Shame for Toshiba...-beautiful design and portability, but all the rest is a big flaw. Their support in non-existent and they do not appreciate their customers. According to me, they stole my money and I will never buy a Toshiba laptop again.

  Sorry for the big message, but I need, I warn potential customers. Can anyone help me with any of these problems? You also have the same problems?

  To follow...

  Hey Buddy,

  With regard to the issue of fan and the heat: you did it BIOS update? A friend told Satellite R630 too and he told me that the fan with the new BIOS version 2.10 activity is reduced. In addition, the laptop is colder than before so I recommend to install this update. You can download the update of the BIOS here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But before you start the update of the BIOS, you should consider the following tips:
  -Run update as an administrator only
  -Unzip all files from zip archive before launching the update file
  -Close all running programs as the antivirus and firewall
  -Make sure the battery is fully charged

  With regard to the SSD it s still a little complicated to install 3rd party products and no one can guarantee that these parts would not work. You're always on the side safely with original spare parts from Toshiba.

  All you can do is to install the new firmware for SSDS and hope that it works, but who knows maybe the BIOS update will help you also in this case ;)

• Pavilion 15-p253nh: HP Pavilion laptop fan is too loud

  Hello!

  I have a laptop HP Pavilion with Windows 10 64-bit 15-p253nh and its fan is too loud. I bought the laptop 3 months ago and it was not noisy at the time. It does not seem to reduce the speed of the fan even in idle. I used to hear nothing by reading an article on the web. I wanted to check the speed of the fan, but I couldn't.

  I used all the programs I found like SpeedFan, HWMonitor, HWInfo, but none of them contained the fan speed. How could it be possible? How could I find it speed (RPM)? I think that maybe they can't recognize the fan for some reason any.

  I put it in mode 'Sleep' with no chance either.

  I also tried to put 'Political system cooling' 'Passive', nothing has changed.

  I looks like after that I turned on the laptop the fan is set to a level and it remains there. The only way to change it (upward) is to use resources demanding programs.

  According to HWInfo, CPU temperatures are roughly between 35 and 45 celsius, so it does not overheat.

  All the drivers are up to date.

  Thanks in advance

  Coli777

  Hi @Coli777

  Please use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  They will be happy to help you immediately. By clicking on the Thumbs Up below, you can say thank you! Thank you.

• Mac Book Pro is not too hot.  It is time to replace the battery?  Can I replace the battery?

  MacBookPro is not too hot.  It's time to change the battery?  Can I do it myself?

  The Mac runs his fans in a feedback loop, based of the internal temperature measured.

  If the temperature goes up and the fans are not speed up to compensate, you probably have a hardware problem.

  If the Mac becomes too hot, it will make an uncontrolled emergency power off.

  EDIT: Replacing the battery is a completely separable question not related to temperature. Is the Samsung phone batteries that catch fire, not Mac.

• Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing happened until now

  Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing has happened so far.

  Same question, the lock in action field icon is absent.

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.

• I keep trying to reactivate win vista Home premium, but it not give me lower down to activate by phone.

  try to reactivate win vista Home premium

  it not give me lower down to activate by phone

  Returns with the product key already in use. It's because I reinstalled the operating system.

  Ms provide a number online, as it would be in many areas covered

  any help would be received with gratitude thank you

  Hello

  I suggest you to see link below and check if it helps.

  How to activate Windows Vista: http://support.microsoft.com/kb/940315

  Activating Windows: Frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Activating-Windows-frequently-asked-questions

  How to find a phone number for a Microsoft Product Activation Center: http://support.microsoft.com/kb/950929

  Hope this information is useful.

• Cannot use the internal mic. External microphone works but the sound is not very loud.

  Original title: microphone

  My microphone internal hp no longer works.  If I plug an external microphone into the socket, it will work, but the sound is not very loud.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Try to run auto Locksmiths and check.
  Reference: http://support.microsoft.com/gp/hardware_device_problems

  Step 2: Set the default Microphone.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
  d now check if the Microphone is listed there and right-click on it and choose Activate.
  e. Select the Microphone, and then click "set as default"

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I am trying to run on windows 95/98/2000 sierra artist 7 that I managed to run ok under vista as an administrator but the custom of 7 fixes the run even if it seems to be installed ok everything im not too technical ideas

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: i

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Let's first try the easy solution.  Click Start, type compatibility in the research field, and click the enter key. This will bring up the resolution of the problems of compatibility of programs.  Click Next and it make a quick check on your machine.  It will ask you to Select the program that you are having problems with, and then click Next.  Click troubleshoot program, then check the box for the program worked in earlier viersions of Windows...  Click Windows 2000 and click on Next. Click on the box for start the program. He will try to open the program as if you were using XP. Once the program is trying to open, click on Next. Now it will ask if it worked for you.  If so, click on Yes, save these settings for this program. If you clicked Yes, every time that you open the program now he opens as if it was running under XP.  That if it worked!

  Sometimes this method does not work.  For these cases, there is a new feature called XP Mode, which will install a virtual machine before you run your program in.  It is not too hard to get set up. It actually installs a copy of Windows XP before you run your program in.   Here's a Microsoft article on how to get it set up: http://www.microsoft.com/windows/virtual-pc/.  XP mode now works even if you do not have the chip installed for hardware-assisted virtualization technology.

  Barbara

• Had upgraded LR 4 to 6 a few months ago.  Have updated all the software and am running LR 6.4 and 9.4 Raw.  Mac also improved to 10.11.3 software.  Camera not too new... Nikon D800e.  Always make me "files have been imported because they couldn't"

  Had upgraded LR 4 to 6 a few months ago.  Have updated all the software and am running LR 6.4 and 9.4 Raw.  Mac also improved to 10.11.3 software.  Camera not too new... Nikon D800e.  Always make me the note 'files were imported not because they could not be read ".  Any thoughts?  Thank you

  This means that you don't have WRITE permission in the destination folder.

  You should:

  1. In Lightroom, determine the exact destination folder (it is on the right side of the import dialog box under Destination)
  2. Change the permissions in your operating system on this specific file WRITE permission; OR Change the destination folder in a place where you don't have WRITE permission

• I want to cancel and get my $$$ back, because the conversion using Adobe export in format PDF to Word does NOT, too many errors and inaccuracies in the Word DOC to use. Please cancel my order AD017941759 as soon as POSSIBLE!  Thank you...

  I want to cancel and get my $$$ back, because the conversion using Adobe export in format PDF to Word does NOT, too many errors and inaccuracies in the Word DOC to use. Please cancel my order AD017941759 as soon as POSSIBLE!  Thank you...

  You will be eager to start here:

  Cancel your subscription or membership. Acrobat, services Cloud of Document PDF

  Be well...

• Cannot download eBooks after upgrade of PC.  Recently I upgraded my laptop to one from the same supplier so all I had to do was to upgrade a few drivers on the hard drive.  My copy of ADE is unfortunately not too cooperative.  Whenever I try to download a

  Recently I upgraded my laptop to one from the same supplier so all I had to do was to upgrade a few drivers on the hard drive.  My copy of ADE is unfortunately not too cooperative.  Whenever I try to download an eBook, I get the message "E_AUTH_BAD_DEVICE_KEY_OR_PKCS12".  Uninstall ADE (three versions), as well as cleaning the registry does not clear the error.  And I can't cancel and reauthorize my new laptop as to authorize is greyed out.  Anyone else having this problem?

  Problem solved finally.  Used regedit.

  https://helpx.Adobe.com/Digital-Editions/KB/error-e_act_not_ready.html

• I downloaded photoshop it is not too long and then 1 week later received a new computer, is anyway to

  I downloaded photoshop it is not too long and then 1 week later received a new computer, is anyway to put photoshop on the new computer?

  of course, simply install and activate.  a license entitles you to two simultaneous activations.

  If you have already activated on both computers, you will need to disable (help > deactivate), at least one.