spittoon

Similar Questions

• spittoon on photosmart 5510

  The spittoon on my photosmart new 5510 has accumulated two thick deposits of small black ink (about 15mm long), once a few days hardly use (printed photos 10 - A4). I understand that the printer uses a small amount of ink for the purpose of cleaning and maintenance but is this normal deposit amount?

  ASO I read that the spittoon collects only the black cartridge ink waste. Certainly he has to collect all color cartridges ink as well?

  I mean can we removed the spittoon to clean and how?

  The spittoon collection contained in the black cartridges and color ink. A small amount will collect at the beginning because of the ink printer initialization process, it is normal. But the cuspidor should not cleaned for a long time. By design, it is not a requirement of customer maintenance.

• Z5200: Q5669-67070 high corner to Z2100? Print quality problems

  Ive got a Z5200 on the bench, and he is smearing ink a litle on the edge of the paper which an effect of bands. The effect comes and goes

  I came across this Q5669-67070 part and Q5669-67075

  It is is a 'wdge extra-high PRS.

  I find no what he does - but this will help fool the problem or what will be?

  What is doing?

  Thanks Peter

  Hello

  Which is used to increase the height on the transport.

  Is recommended when using very thick media.

  First of all make sure that the media you use is supported by the printer

  Make sure that the selected media to match to the paper.

  If the thickness of the WAD is your problem.

  Also consider

  -Delaminated print heads

  -Contaminating Station Service print heads

  -Media curling upward due to its normal curvature. (If this is the case, use a new roll)

  -Spittoon left contaminant of the print heads

  -Detector Ful drop ink

• HP Designjet T2300 PS printer: HP Designjet T2300 gas station problems

  I work for a small engineering firm. We have owned a large scale printer Postscript HP Designjet T2300 plotter for about five years. We rarely have problems with it, but a few days ago, we started to have problems with the service stations of the tracer. Whenever we turn the plotter hear us a loud clicking noise coming from the area of the station.

  We initially received error code 21.2:13. I contacted HP support and they had me run diagnostics on the service station. They returned with the error code of 21:13. I was told that I needed to replace the service station.

  I disassembled the side cover right to access the service station. When you turn on the plotter, as it has gas carrier station inializes goes ahead all the way and continues to click. I got out the service station Assembly and disassemble to see if I could fix it. Badly cleaned ink necessary spittoon & one of the metal clips used to stop the carrier to move too far to the front had popped out.

  I've cleaned all the ink level and I replaced the clip. I reassembled the Assembly and reinstalled in the plotter. After the reboot, I can still hear the rattling noise. The motor that moves the carriage of station service before doesn't seem to work properly. It does not stop when it reached the front of the gas station. She continues to advance the carrier and click on gears.

  Is there a sensor or something built that is supposed to stop the carrier to service station when it is moved to the front as it has supposed to go? Is my only option to replace the entire service station?

  Thank you!

  Hello

  If there is a click on the service station, provided is because a part broke.

  Your best option is to replace the part number

  CH538-67040 gas station - includes the fall detector and the spittoon of station service

• can I travel by plane with a HP laser printer or inkjet

  need to know if HP laser printer or inkjet can be transported by air

  and he agreed with carry-on baggage or luggage?

  For most HP inkjet printers I would say do not transport them by air. Most of them have a spittoon based on the service station and there will be liquid ink in it so that the printer must stand at all times or you can have a mess on your hands and clothing and the seats.

  HP sells some portable inkjet printers, and those would be much better for the trip.

  Air transport will not hurt a LaserJet printer, but you should remove the toner cartridge and put it in a plastic bag in a padded container.

  Where possible when you move a fairer LaserJet printer across the room you need to remove the toner cartridge or cartridges when it's a color machine.

• Replace the message of service module

  I have a HP Officejet H470 mobile printer.  I really like it, but...    I got the message to replace the ink (cuspidor) service module.  I ordered the package and installed.  I think that the new spittoon is installed correctly.  The printer will print and works correctly, but I keep getting the message to replace the ink service module and there are lights on the printer.

  There was a good amount of ink in the spittoon, I replaced and a few spills around her I have tried to clean up to get rid of this message, but I still get it.  Do you have an idea of what is triggering this message.

  HI - you reset the printer after you have installed the service module?  You can reset it by following these steps:

  Press and hold the Cancel button ( ) and the Resume button ( ) simultaneously for 8 seconds.