"spooge driver not found verify that directx is installed correctly.
Original title: pilot spooge
on windows 7, I am trying to run the dawn of war, and I get the message
"spooge driver not found verify that directx is installed correctly."
After many attempts too much work around that, I can't seem to find a way to solve it.
Although later versions of the dawn of the war seem to work
Hi Chiefred,
Please contact Microsoft Community.
It seems that you are facing problem while playing the game Dawn of War. It would be great if you can answer the following question:
Were there any changes made on the computer before the show?
If you have problems getting a game to play properly, the DirectX Diagnostic tool can help you point the source. Please provide the Direct X diagnostic details.
Visit the link for more information about the DirectX diagnostic run.
Diagnosing basic problems with DirectX
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX
See also:
DirectX: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/DirectX-frequently-asked-questions
I uninstall and reinstall the game also suggests:
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.
Tags: Windows
Similar Questions
-
Satellite P200-1EE - hard drive not found if I try to install XP
Hi I have a problem.
I recently bought a Toshiba Satellite P200-1EE laptop computer series (of all things) running Vista and nothing else problems so im trying to install XP Professional and crush Vista.
But whenever I try to install it says "disc not found... no access to.
I heard about such problems before something as a "block of software Protocol.Any suggestions?
Hello!
Why you n t search forum before starting a new topic?
I mean you will find hundreds of discussions on this question here in the forum and you will find the solution to your problem in a few minutes.Well, the reason for this is because you need the SATA drivers before installing Windows XP. As far as I know that your laptop is equipped with an Intel chipset and so you have the Intel Storage Manager. You can integrate the drivers of external floppy drive or nLite [www.nliteos.com]. In addition, this document could be useful for you:
http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htmIf you have any other questions, please use the forum search!
Good bye
-
Hard drives not found when you try to install Windows Server 2008
Hey guys and girls,
I've spent the last 20 hours, trying to solve the problem of not being able to install windows server 2008 r2 on a new Dell server.
My configuration is:
Dell PowerEdge R310
4 x 1 TB 7.2 K SATA HDD
Controller Raid PERC H700
I can't even install the drivers that I downloaded from the Dell support site because Windows Server 2008 Setup will not recognize them. These factors include the Raid Controller, chipsets Intel, SATA etc.
I used the settings default, all changed the Auto Off Ports and vica versa, I put the server in Raid and ATA mode with all the possibilities, but it will be will not detect any HD!
Please help, as it is essential for my health, employment and mental health.
Best regards
Sami L.
What OS? What RAID controller? How many discs? The size? RAID level?
I can't assume that everything is the same, especially when you have a different system altogether which does not support the H700 (so the files would have been meaningless even if Dell had not broken links). :)
-
attach the problem. Tablet connection error: driver not found
I can't connect my tablet which has android v4.2 Jellybean. It shows driver not found. what I can do.
Original title: attach problem
Hi Andre,
Thanks for posting your query in Microsoft Community.
I imagine the inconvenience that you are experiencing when you plug your tablet with Windows 7 system. I will definitely help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.
- You did it any significant hardware or change software on the computer before this problem?
- What is the exact error message you get, when you say, "Driver not found"?
- Connecting the Tablet via a Wi - Fi hotspot connection when you mention, "tethering problem? If this is not the case, how you try to connect the Tablet?
- What is the brand and model number. the Tablet?
The question seems to be resulting in an incompatible or damaged driver that obstructs the connection. First, I suggest you to check if you are able to connect the Tablet via a USB cable.
In addition, I would suggest trying the following methods and check if the number is reproduced.
Method 1:
Run the network troubleshooter to verify connection of the Tablet problems.
Using the troubleshooter from network in Windows 7
Also, I suggest you run the hardware and devices Troubleshooter to check for problems with the related drivers that can help connect with the tablet.
Open the hardware and devices Troubleshooter
If the problem persists, try the following method.
Method 2:
Manually install the Windows 7 compatible driver from the manufacturer's Web site.
For your reference:
What to do when a device is not installed correctly
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
Satellite A60 - Hotkey Utility Driver not found
Hello
I had to do a clean reinstall of Windows XP, Service Pack 2 (not recovery discs) on the A60.
I reinstalled all the drivers in the order on the list to install it, but when I try to install the Hotkey utility for display it stops and reports "driver not found".I have tried to install everything but the end upward with no FN keys, can not change the brightness or volume in fact that I did not sound at all!
Can anyone help?
Robin is soonHello
I am not sure what the problem may be, but as I see in the statement of the facilities is written:
...
Toshiba hotkey utility for display V1.00.03SA
Toshiba hotkey utility V1.00.08SA
...Did you follow this order?
Try please install Toshiba hotkey utility V1.00.08SA at the beginning and then Toshiba hotkey utility for display V1.00.03SA.
After doing this installation utility V1.00.07SA TOSHIBA.MI is logical to install hotkey utility first.
Please post the result.
-
Error retrieving Tecra A6 (hard drive not found. Error: F3E1000001)
Hello
I want to recovery my Tecra A6, but when I insert the first (of three) DVD and restart my system to get to the recoveryMenu (when booting from the recovery DVD) just rebooted my laptop and every time I try this (very simple procedure) this
happen again.
That's why I tried to get it back to Win XP > Toshiba Recovery Wizard... in the first DVD in the 'BIN' folder there isn'ta "RECOVERY.bat" batch file when I run this file will open a CMD window and checks are willing (and then the
following text is displayed in the CMD window :)
"
Verification of DMI
Verification of RAID
Failed to initialize the raid class.
Check the HARD disk
End of the error
"
and a new window opens with the following text:
"
an error has occurred.
Error: F3E1000001
Hard drive not found.
Please press [OK] to turn the computer off.
"
If I press OK the any immediately goes down (without shut down windows) and I have to restart.
Also my laptop works properly my recovery DVDs sounds great, I want to just recover my system because of the speed morein Win XP.
Maybe there is a new firmware for my HARD drive or an update of the BIOS so that the laptop could detect my HDD.
In Device Manager, my HARD drive is: HTS541010G9SA00Wait a minute: you try to run recovery as OS installation?
The recovery procedure must be on path:
Turn on the laptop and press the F12 key
When the bootable devices appear put the first media for recovery in the optical disc drive
Choose CD/DVD media from the list and press ENTER
Follow the menu on the screen. -
HP Pavilion Dm1 4000au, windows 7 Home premium 32-bit, error: not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system diagnostics, how do I 3Fo system to be installed my notebook/laptop...please help me...?
If F9 does not run the diagnostic, then most likely to replace the hard drive. Once the new drive in place, start the recovery DVD series that was made when the PC was new. If you do not make them, or they are lost, order a new set of HP.
-
OMAP4430 driver not found. Where can I find it?
I tried connect my pc to Smartphone, but it came with a message "omap4430 driver not found", if anyone can help me find this driver?
Hello
1. who is the operating system installed?
2 may I don't know the brand and model of smart phone, you are trying to connect to the computer?
3 have you tried to contact the manufacturer of the smart phone for the appropriate device drivers?Check the status of the device in Device Manager.
http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
Method 1: Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:Follow below suggestions for updating a hardware driver that is not working properly.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyIf you are unable to find the drivers, you may need to contact the manufacturer of the smart phone, they will allow you to install the correct drivers for the device.
I hope this helps.
-
not found boot device. Please install a drive of system.hard of operation (3FO) passed all the test drive I get this message after the recovery disc 1 stops at 36% and tells me to put in disk 2, I just discovered that my grandson was trying to help me by resetting my computer from factory settings off he thinks about 27% complete , it is only 8 and just trying to help this computer is only a few weeks was a Christmas gift its my fault for complaing about windows 8, can someone help me please thanks in advance
I solved this problem myself thanks all syudents there to post what you've tried I went to bios and disabled the startup enabled legacey mode sucure tried to go to the Boot Manager it was my boot devices tried to use recovery disc recived the same message I have reset to factory settings and was able to reinstall windows normally
-
Hey everybody,
My HP Pavilion G6 - 1164sa is coming up with an error "Hard drive not found" at the start up. It also makes a clicking sound. have you tried another hard drive to an old laptop in its place and the works, but because it is not the correct drivers installed for this model most things do not work. Need a solution to this? can I order a new hard drive for hp with all the drivers installed?
Your drivers are posted on your support page > HERE
You can order a hard drive at HP, but it will be a hard drive Virgin, as well as a new hdd retail except at much higher prices. I would like to replace the hard drive with a > hdd retail.
If you plan to use recovery disks to reinstall Windows & software/drivers have one that is at least as large a capacity than the original, may be larger, but not smaller. If you have not written a set of recovery discs, you can usually order from HP for a small fee.
If you can read the Windows 25-character license key attached to the bottom of the laptop there is possibility to download an ISO file, burn it to DVD and install Windows. Then you need to download your drivers on the support site. (Any size hard disk could be used with this option)
-
Bluetooth peripheral device driver not found.
I have a laptop of Lenovo G 570 with professional Windows installed series. I am trying to pair my Bluetooth headset with my laptop, but I can't do it. It says on the troubleshooting, the Bluetooth peripheral device driver not found. Kindly help!
Hello
Check with Lenovo support, their drivers and documentation online and ask in their forum
on known problems. Also check with the manufacturer of the helmet.Support from Lenovo and downloads
http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.doLenovo forums
http://forums.Lenovo.com/=========================================
Hardware devices not detected or does not work - a Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAdd a BlueTooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computerSet up a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-deviceThe problems with Bluetooth devices
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devicesHow to set up a Bluetooth connection
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connectionThe Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
as expected when you click on the element - for Windows 7 this check manually
http://support.Microsoft.com/kb/960531/en-usIf you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.
BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
devices around you. For each detected Bluetooth device, it displays the following information:
The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
Last detection time and more. BluetoothView can also warn when a new Bluetooth device
is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
http://www.NirSoft.NET/utils/bluetooth_viewer.htmlBluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
the standard output. For each Bluetooth device, the following information is displayed: MAC
Address, name, Major Device Type, minor device Type and possibly the name of the company of
the device (if the external file of MAC addresses - oui.txt is provided) - FREE
http://www.NirSoft.NET/utils/bluetoothcl.htmlBluetoothLogView is a small utility that monitors the activity of Bluetooth devices around you,
and shows a log of Bluetooth devices in the main window. Each time that a new Bluetooth
device coming to your area and when the unit comes out of your area, a new journal line is added with
the following information: device name, time of the event, address, Type of event ("peripheral
Arrival' or 'Device left'), Type of aircraft and the company that created the device. BluetoothLog-
View you can also specify a description for each device (according to its MAC address)
that appears in the column "Description". -FREE
http://www.NirSoft.NET/utils/bluetooth_log_view.html---------------------------------------------------------------------
Change settings for a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-deviceAdd a Bluetooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computerAdd a Bluetooth device or other wireless or network device: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions---------------------------------------------------------------------
More information of possible interest to some:
What is a Bluetooth personal area network (PAN) network?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-PanConnect to a Bluetooth personal area network (PAN) network
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-PanI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Bluetooth device driver not found after accidental uninstall (Win7 64 bit)
I use a Plantronics M50 bluetooth headset on my mobile, Skype etc. All troubleshooting yesterday (had a problem with the microphone volume is very low) I followed a few steps of an article if found on a Microsoft forum, telling me to uninstall the driver, as well as to restart my laptop (Win7 64 bit) would recognize and re - install the driver.
In Device Manager, I right-click on the M50 (under audio, video and game controllers) device and chose to uninstall (as prescribed in the MS article). Here's where I shot myself in the foot; I ticked the box "Delete the driver for this device" (thinking that Win7 would get a fresh driver from Windows Update to reboot)
After the reboot, my laptop started to reinstal the driver device, but for "Bluetooth device" reports "no driver not found"
I myself tried in vain things:
- tried to find the driver sur.com, but isn't available (plug-and-play)
- installed software (incl. Plantronics Control Panel) Plantronics package
- I tried Windows Update
- installed Microsoft Windows Mobile Device Center 6.1 Driver (as advised on various sites to set "Bluetooth Peripheral Device" reports questions 'no driver found'
At the hope that someone had a suggestion for what else to try, or maybe how to find out what that exactly that I deleted by choosing 'delete the driver for this device '.
Thanks in advance!
Edit:
Just in case it helps, I noticed that the following folder is created at the time of uninstal and reinstal, containing calisto.inf, calisto. PNF and Calisto.cat
C:\Windows\System32\DriverStore\FileRepository\calisto.inf_amd64_neutral_2b13d4544d6cf2e6
I decided to use Sytem Restore to restore my system to before I uninstalled the driver. There are a few downsides to this, but so far the benefits outweigh them.
-
I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.
Usually, by unplugging the USB device and plug it in then that she return to should force Windows redo the settings.
-
Dell Inspiron 3520 internal drive not found
The morning that the pc was working fine, I turned it off and then back on the change to another operating system. Instead of take me to the boot options it took me to a black screen saying;
intenal drive not found
to resolve this problem, try reinstalling the drive.
No bootable device - don't strike F1 to retry to start, F2 enter the Menu Setup, F5 enter PSA
I did not do anything for the pc, it was just sitting at the table and so I doubt that it can be linked to the material as say several forums.
When I enter the BIOS it says the disk of HARD fixed; ST500LM012 HN-M500MBB (500 GB)
Here the details of the computer
Dell Inspiron 15N 3520
Windows 8 (with preview 8.1 and Ubuntu)
use UEFI
CORE I5 2.5 GHz
4 GB Ram DDR3
500 GB of HDD (I think he has a 32 GB SSD cache)
Please help, I tried to read everywhere on the internet and try everything that does not require opening the unit (the unit is new and is not easy as I wish it were).
Can someone tell me what to do, or if it can be saved without any hardware change? It has only about 2 months and I have important information inside (no yes no return upwards...)
Hi joseph97svl,
Thank you for the update.
Because the HARD drive is detected in the BIOS, and also the successful test, the equipment works as expected. I suspect it is a software problem and you can consider restoring the system using the recovery discs. To restore the system using the recovery media, follow the instructions given in the following link:
In case the recovery discs are not created, send me a private message with the service system number to help you further. Please click on my name and click on start the Conversation to send me a private message.
-
Help format/reinstall, HARD drive not found
Dell Dimension 8400 my brother got a horse of Trojan/bot out there and I had to do a thorough cleaning due to not being able to locate the infection and the internet company kept cutting off the Internet.
I first tried the start of the disc and using disk relocation provided by Dell. He said "this part of the Setup program prepares Microsoft Windows XP on your computer. To set up Windows XP now, press ENTER. To repair a Win XP... Press R."
I chose the first option and get the message: "Setup has not found hard disk units installed on your computer." And the only option (F3) is to stop smoking.
I made a diagnosis of HD and it passes. Looking in the BIOS, it is recognised as disk 0 and also in the startup list.
I decided that maybe there was a lock on there so I used DBAN to run a DoD wipe/format and clean the drive. So now it has to be completely formatted. I also jumped into a boot disk and performed a fdisk, but he doesn't recognize and create a partition of 8 GB to 160 GB. Hmmm, something's not right.
Again, I'm trying to reinstall with reinstall drive and a full copy of XP that I have and you still get the "hard drive not found" error.
The FAQ does not seem to cover this issue, but I could easily looking in the wrong places. in any case, I want to just wipe the drive and reinstall. Any suggestions?
Message edited by Deboad on 10/25/2008 17:36
Maybe you are looking for
-
Emergency aid necessary for the restoration of cats whatsapp
Hello. Ive been trying to restore my cats icloud whatsapp but it still seems stuck at "99% of the finish" I deleted and reinstalled and tried to restore several times already and the problem persists. I used connections different wifi plugged into a
-
Magic Mouse connected but no display on screen pointer
Just pass on my iMac and Magic Mouse and not even connected. Mouse as connected but shows there is no pointer arrow on the screen. Please notify. If the mouse is broken how can I shut down the computer?
-
Where can I find my purchase history in the ios app store?
Where can I find my purchase history in the ios app store? I use air ipad 2 and I bought some elements of support in an online game, but it is not my purchased item? She already deduct under my belt.
-
How can I sync my iphone contacts with outlook 2016 6 more?
How can I sync my iPhone contacts with outlook 2016 6 more?
-
How can I insert an image on a movie in movie maker widdows
Hey hope someone can help me with this. I would like to put a picture on top of the video. So the film is running and I can add a picture on the top, which can exsplain what happens in the movie. I need to be able to control how many images the photo