Spooler services printing does not start, error Code 1053

Similar Questions

• Spool of printer does not start automatically

  Original title: printer spool does not start with the computer

  I have a HP dv6000 with a defective printer spool.

  If I restart or logoff, the spooler is not running and must be launched manually.
  I put the auto service and delay start, but after the change.

  Hello

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  3. What is the brand and model of your printer?

  Please follow the methods and mark the question below:

  Method 1:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

   

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

   

  I hope this helps.

• HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

  I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code:

  UCUFWF-56C81D-XD003G-60WF03
  

  No idea what this means? Help is appreciated.

  Hello

  You are welcome

  Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 500 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, see if you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• Windows Firewall does not start: error code 0 x 80070437

  I can not start the Windows Firewall on my system.

  When you try to start the firewall I get error code: 0 x 80070437
  During the execution of the services as administrator, the Base filtering engine is started.
  Firewall Windows is not started, but when I start: error 1079: the account specified for this service is different from the account specified for other services running in the same process.
  Authorization of firewall Windows Driver is not present.
  How can I get my firewall?
  Thank you
  Hey Conor,
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• Computer does not start "Error code: OFOO:137 B.

  When I booted up my pc I got the message "Windows cannot start because the following file is missing or corrupt: \Windows\System32\Config\System you can try to repair this file by starting Windows Setup with the installation of original CD-Rom Select 'r' at the first screen to start repair"then I used a Dell diagnostic tool on my pc with a response from the "error code" : OFOO:137 B ' Msg: IDE device failed: blank media or no media is present in optical drive. "  Tuberculin media with data (Resource CD, CD of Installation) .the given the error code and message can be used by Dell to help diagnose the problem

  Hello

  1. have you made changes on the computer recently?

  Your CD - DVD drive cannot read the disc, I recommend that you contact Dell to check for any physical damage. Once you have the player running, then use the article below:
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Windows XP does not start error Code 0 x 00000024

  I was playing a game oin my 20o5 Windows XP Media Center EDition and then it froze and he died so I decided to reactivate it, but then it went to a blue screen with a code of 0 x 00000024(0x00190203,0x8AD9E0D8,0xc0000102,0x00000000) Please help me I don't know what to do

  Hello

  1. did you of recent changes on the computer?

  2. are you able to boot into Windows after the Blue error screen?

  3. do you have security software installed on the computer?

  This error occurs generally if there are bad sectors on the hard disk.

  I suggest that you perform a CHKDSK scan on the computer by using the recovery console, which would scan for bad sectors on the hard drive will try to get it back.

  1. Insert the Windows XP CD into your CD drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
  2. When the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R
  3. When you are prompted, type the administrator password.
  4. Type: chkdsk /r and press ENTER.

  When you are finished, type exit and your PC will restart and if all goes well start Windows.

  Note: If there is any data on the bad sector on the hard drive, it can be lost. If you can boot into Windows, I would say that you back up the data and continue.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

• Windows can't open add printer. The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Hello world

  I have back Windows 10 to Windows 7 Home Premium as suggested previously and it worked fine. Then knit as well as the sound function keys, but I now have a problem with the printer. I have a Toshiba Satellite.

  I am trying to print and get the message "...". You must install a printer.

  I reinstalled my Epson WF-2630, but when I try to add a printer in devices and printers, I receive the message "Windows can't open add printer." The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Can someone help, please?

  Thank you very much

  WestAusShortie

  Hello West,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur if the print spooler service is not running.

  Please refer to the suggestions of John Rubdy replied on April 29, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-cant-open-add-printer-the-local-print/41f98aad-3a9c-47A6-978b-7c20e3ce9e0b

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Vista: The device can not start (error Code 10) for a USB CDC device which works fine in XP

  I have a USB device 2.0 DCC which works very well under all of our Windows XP machines, but not based on Vista.  The device uses the usbser.sys driver and emulation of the virtual Comm Port.

  The text of the listing shows the same information on Xp and Vista, except under vista it shows no open pipes.  Shows Device Manager: device can not start (error Code 10).

  Using Vista I can't connect to the vista of CDC through concentrators or device to any other device wireless hub except for a Dlink Wireless hub, which has a layer of software between the CDC device and the PC.  With Xp, it all works very well on more than one PC, with Vista, there are questions.  I use the INF manufacturer provided for Vista, still no results.

  Any ideas on this would be greatly appreciated.

  Hi NuWaveDC,

  Thank you for taking the time to post on the Microsoft answers Forums.

  Please see the following article for an explanation of this error code 10.

  Explanation of error codes generated by Device Manager

  http://support.Microsoft.com/kb/310123

  Follow the steps listed for the error Code 10 see if this helps solve your problem or not.

  Please post back to let us know if this information was useful or not, so that we can help you if need be.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fix it Center does not open error code 0 x 80092003

  Fix it Center does not open error code 0 x 80092003

  Hello Evertonia,.

  If this happens with a fixit tool, then you will need to request support via the link given by Diana D.

  Best regards

  Matthew_Ha

• Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  Original title: windows updates 7

  Updates to the computer have been OK until MS net framework has been improved from 3.5.1 to Ms. Net framework 4 who do not go in. several attempts have been made to install but still got error codes. . Since then, updates only install are removals of malware. Silverlight will not install either.    Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  I am at a loss... Anly help would be welcome.

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
  2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.

  Press enter

  3. open Control Panel > Windows Update and Windows 10 should begin to download...

  If this does not work:

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• CD player does not. Not changed anything on computer. says will not start error code 10.

  I have Windows vista on my computer. I tried to play a cd and burn also. The drive does not at all. The light comes on, it runs for a second or two and then stops. I checked the updates for the drive and there is not. It is coming up with an error code 10. States, it does not start. I tried to find a solution for this and found nothing. HELP PLEASE?

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• StarTech ec1pecps parallel adapter does not start, error 10

  I'm having trouble installing a parallel adapter from Startech ec1pecps on my laptop Dell inspiron 9400 running XP. I tried new drivers and the advice of the other forums, but the device driver says: "device cannot start error 10.» I received no response from Startech on it. Can anyone help?

  Hi GregSwinburne,

  ·         Have you tried to connect the unit to a different computer and check?

  The Code 10 error code is generated when the Device Manager has not enough information or the error that is upward by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  For more information, see the article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  You can also run the troubleshooter and check if it works.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Let us know if that helps.

• Update on 09/06/15 causing Windows Cache of police service of does not start

  Since I applied updates my system event logs are riddled with the following errors:

  Source: Service Control Manager

  Event ID: 7000

  Level: error

  The Service's Cache of police service Windows could not start because of the following error:
  The executable program that this service is configured to run in does not implement the service.

  This started happening as soon as the system rebooted to apply the latest round of updates.

  The applied updates are:

  Restart required: to complete the installation, the following updates, you must restart the computer. Until this computer has been restarted, Windows cannot search for or download new updates:
  -Advanced Micro Devices, Inc. - other hardware - AMD SMBus
  -Update for Microsoft Outlook 2010 (KB3054881) 32 - Bit Edition
  -Update for Microsoft Office 2010 (KB2965296) 32 - Bit Edition
  -Update for Windows 7 for x 64-based systems (KB3054476)
  -Update for Microsoft Office 2010 (KB3054834) 32 - Bit Edition
  -X 64-June Windows malicious software removal tool (KB890830) 2015
  -Security Update for Windows 7 for x 64-based systems (KB3063858)
  -Security Update for Windows 7 for x 64-based systems (KB3057839)
  -Update for Microsoft Office 2010 (KB3054848) 32 - Bit Edition
  -Security Update for Microsoft Word 2010 (KB3054842) 32 - Bit Edition
  -Cumulative Security Update for Internet Explorer 8 for Windows 7 for x 64-based systems (KB3058515)
  -Update for Microsoft Outlook Social Connector 2010 (KB2553308) 32 - Bit Edition
  -Security Update for Windows 7 for x 64-based systems (KB3059317)
  -Update for Microsoft OneNote 2010 (KB2965297) 32 - Bit Edition
  -Update for Microsoft Office 2010

  My question is that these updates broken service?

  Thank you

  Brad

  Uninstall them all.

  Reset.

  Check the feature you want is back... If Yes...

  Install a single update of the list.

  Reset.

  Test.

  Always good on the feature you want?  Repeat the process again and again until you find either the bad update (here and report back which one it was) or you have all the installed and always your full functionality.

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• TC - 705 crashed. does not start. error message

  My sucks TC-705 crashed.  It does not start.  error message saying lack driver DVD player.  At the beginning I was not too worried because my recovery is on a USB key.  He went through the installation process, but the re-boot did it again.  Endless loop.  I tried all repair options without success.  I went to the command prompt and run the scan and repair.  Scanned very well, she could not make the repairs.  If nothing worked the hard drive may be damaged, said a source online.  I put a new disc in, but there was no improvement.

  Where should I go from here?

  Ironfly,

  I downloaded vanilla but after I extracted it I could not make heads or tails of it.  The Readme went on and on the forums running with it but not said me something about how to launch it.  I have a question on how to launch online, but the first statement, I had was to open my WOW file.  I knew then that I had wandered in some elses universe.  After reading more later, I realized that he was playing.

  All of this is moot right now because my DVD drive and all my usb ports are dead.  There is nowhere where ever I go except in the bios.

  At this point, I don't think that there is nothing I can do.  The computer is still under warranty and I have a one year protection plan so I'll let Newegg and Acer deal with reclamation.

  I wish I could give you a hundred Bravo for all your efforts.  Thank you and all those who participated.

  unktim