spooler stop working vista
spooler stop working vista
Hi kevin0129,
Try this
Go to programs and features in Control Panel > on features Windows turn on or off
2. click on + sign of printing services
3. Select LPD and LPR. You must remove the Internet printing Client. > restart your PC to ensure there is no error in the spooler service.
4. Add once again your printer driver.
Tags: Windows
Similar Questions
-
Print to PDF - Thunking spooler stops working
When you print a document in Word 2007 to create a PDF file (I have Acrobat 9), I now get an error message that says "Thunking spooler APIs from 32 to 64 process has stopped working". The PDF is created, but that part of the document is printed. I did that for awhile on this system, XP Edition Vista 64 family, without problem. But recently it started and I can't create PDF documents in Word 2007. When searching on the microsoft.com site, I can't find anything on it. Thanks in advance for any help.
markbgardner,
Thank you for visiting the Microsoft Answers community forum.If it is a 64-bit version of Vista, then your problem may be related to the try to print from a 32-bit program on a 64-bit operating system. There is a fix for this problem here:
You experience problems when you try to print a document in a 32-bit program on a computer that is running a 64 bit version of Windows Vista
http://support.Microsoft.com/kb/941962/en-usIf that solves not, try to uninstall and reinstall the printer driver. It is possible that the drive got corrupted.
Also try to run a System File Checker:
To run the System File Checker tool, follow these steps:
Click Start and type cmd in the box start the search.
Right click on cmd in the list programs, and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
At the command prompt, type the following line and press ENTER:
sfc/scannow
When the analysis is complete, test to see if the problem you are experiencing is resolved.If this does not work, you can do a system restore to a point in time where he worked:
To restore the operating system to an earlier point in time, follow these steps:
Click Start, type system restore in the search box, and then click System Restore in the list programs.
If you are prompted for an administrator password or a confirmation, type your password or click on continue.
In the System Restore dialog box, click on choose a different restore point and then click Next.
In the list of restore points, click a restore point created before you started having the problem, and then click Next.
Click Finish.
The computer restarts and system files and settings are back to the State they were in when the restore point was created.Let us know if you need more assistance.
Thank youGloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Printer Spooler stopped working
original title: Printer Spooler problem
How can I fix my printer so I got the message spooler subsystem app stopped working and was closed?
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
-
Satellite X 200 - 1AA - Fn keys stopped working - Vista operating system
The keys Fn on my Toshiba Satellite X 200 - 1AA has stopped working.
Operating system is Vista Premium SP1.I Don t know the cause (a Windows Update?).
Can someone give me a solution (in addition to using the restore CD)?
jmmatos
Hello
Yes, I also noticed the similar problem after Windows Vista update of certain functions of the laptop no longer works
I reinstalled the VAP (value added package) and Toshiba controls and reworked the FN keys.
Check it out!
-
APPCRASH svchost.exe_wuauserv - Windows Update stopped working - Vista Ultimate x 64
"Windows Update has stopped working" - exact error message. I spent three months of reading the forums, looking for answers and applying diligently solutions - which none have worked - of course :)
This is not the problem of BITS. Yes, I also tried sfc/scannow. This isn't a new installation of Vista. Latest updates of success were 24 January
The error relates to: APPCRASH - svchost.exe_wuauserv
Exception code: c0000005
Exception offset:... 001029cdSignature of the problem:
Problem event name: APPCRASH
Application name: svchost.exe_wuauserv
Application version: 6.0.6001.18000
Application timestamp: 47919291
Default name of the Module: c:\windows\system32\wuaueng.dll
Fault Module Version: 7.2.6001.788
Timestamp of Module error: 48f7aab3
Exception code: c0000005
Exception Offset: 00000000001029cd
OS version: 6.0.6001.2.1.0.256.1
Locale ID: 7177
Information additional ca 7 1: 6
More information 2: f5301b6cae295bf8a2fa5c4797c21e55
3 more information: 53dc
Additional information 4: 2655659e60e9fe4d553a061dcca31137
(in print manually so Colocation errors above)Please, I am desperate to solve this problem and finally get secure windows-without even reinstalling Vista :)
Thank you very much
Hello ms_frustrated,
I recommend that you perform a repair installation. It would be the fastest way and repair you the computer and while still keeping your documents. PLEASE SAVE YOUR SYSTEM VISTA FIRST. The link below explains how to perform a repair installation. After your installation, verify that Windows update works before installing anything.
Thank you for using answers Forum. Please let us know how it works.
Joseph
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Explorer Windows has stopped working Vista Service Pack 2 has begun with October 2011 updates
I get the following message is displayed when I bring some lists of files in a directroy on my C: drive and also when you look at other directories on the other pc is my Vista machine. (other machines running XP and have no problems). I do turn Norton Antivirus without any problems, you run malware and no problems to speak of. This all started I think during updates October 2011 MS and I don't have any restore points left will support this far. See more about messages I receive. I was uninstall as many updates in October as it will unistall without effect. Any suggestion on how to solve this problem. ?
Explorer Windows stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: Explorer.EXE
Application version: 6.0.6002.18005
Application timestamp: 49e01da5
Fault Module name: StackHash_d9cc
Fault Module Version: 6.0.6002.18327
Timestamp of Module error: 4cb73436
Exception code: c0000374
Exception offset: 000b06fc
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: d9cc
More information 2: 6fe3411f9375e5d417645fd299fa50dd
3 more information: 04b 6
Additional information 4: dd0cb01a2b153bc26250d3323a5ef24b
Of course, it looks like you copy/paste the error in your first post.
If it was Windows Internet explore (IEXPLORE. (EXE), it would not v6.0.6002.18005 (which is Windows Explorer in Vista SP2).
In any case, Yes, it is time to "wipe n recharge."
-
Convert.exe has stopped working Vista
I'm running a program that converts any type of movie file extension, when it works normally... but at the moment it happens with convert.exe has stopped working... and it does the same thing with Divx Converter
Tests-
Go to the DivX icon or shortcut
Right click and select Properties
Select the Compatibility tab
Check run in compatibility mode and select Windows Vista Service Pack 2 (even if you are on Win 7) check her disable visual themes
Run as administratorBack up the registry before you do the following:
http://maketecheasier.com/backup-registry-in-Windows-7/2009/12/15
Start > type Regedit
Make sure this key:
HKEY_CURRENT_USER\Software\DivX\Settings\StreamEngine\DfxAutoEnable
Make sure its value is 1
Reboot and close registry
Need more help, try DivX support: http://www.divx.com/en/support
-
Copy paste & has stopped working Vista
I am on vista and all of a sudden my copy and paste into word and excel has stopped working. After some research, I think that its to do with the Clipboard, but I am unable to find it. Can anyone help? Thank you
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or try the Office discussion groups:
http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
Office newsgroups
Discussions of general issues of the Office.
They will help you with your office questions in the newsgroups Office above.
See you soon.
Mick Murphy - Microsoft partner
-
Module of persistence and Windows Media Player has stopped working Vista
I get a message when I reboot the persistence module has stopped working. Windows Media Player has also stopped working.
Hi Greg,.
Since when are you facing this problem?
Method 1: Run the fixit available in the article below
When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank
http://support.Microsoft.com/kb/925704Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Your double post, I see you have a codec problem
Method 4: Download and install the codec, see the link below to do this:
Codecs - frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
-
After you download Internet Explorer 9, Windows Explorer has stopped working Vista
I downloaded ie9 for a windows update. Since this update my windows Explorer has stop working. I can't use any of my popup windows they will display the error message, restart. is there a solution?
* original title - after download IE9, Windows Explorer has stopped working. Why did I get this error message? is there a solution? business of vista with all the updates.*
Hi gdd6,
Please see the thread with a similar problem and fix possible:
I hope this helps!
-
Adobe Cs5 has stopped working (Vista 64-Bit)
I don't know if it's a problem but whenever I close my first Adobe Pro Cs5 I get this
Adobe cs5 first stopped workingFiles helping to describe the problem:
C:\Users\AppData\Local\Temp\WER39D4.tmp.version.txt
C:\Users\AppData\Local\Temp\WER4D65.tmp.AppCompat.txt
C:\Users\AppData\Local\Temp\WER7F2F.tmp.mdmpThe good news is that it happened not while I'm working on something, it happens everytime I close the program.
I would simply ignore? I'm running on Windows Vista 64-bitSee if this forum can help you:
First Pro CS5 forum:
http://forums.Adobe.com/community/premiere/premierepro_currentIf no help, Adobe Help and Support forums:
-
Windows Explorer has stopped working vista 64-bit
This is a random error that continues to be. I wonder if I want to seek a solution, when I do, it seeks a minute then quits or restart the program, when I do closes. It's random, seems to happen with windows internal programs, it happens more with I click, right happens again and again, but I'm going to work if there is more then a why to open a program like: go to control panel and double click on Device Manager, I get Windows Explorer has stopped working, but I can't get to the system hardware tab Device Manager and it opens fine. I can do a restore and I don't know that I don't have a virus or spyware on my computer. I can't say at this point when it started, cause I just thought it was a freak thing. Maybe something to do with the UAC. There must be an easy fix for this. Please help, going nuts about it.
Hello
The problem is probably AVG which has caused a lot of problems lately for 8.x and 9.x.
Frankly, I would delete it. Download but do not install the replacements until AFTER you remove AVG
and restarted.For ALL - download - SAVE - go to where you put it-right-click on Reboot - RUN AS ADMIN - when you have finished
AVG removal tool
http://www.Avg.com/us-en/download-tools-------------------------------------------------
Here's what I use and recommend:
Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
Microsoft Security Essentials and Prevx have also proven very reliable and compatible.Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.
Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
(Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
http://www.avast.com/eng/avast_4_home.htmlOr use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Microsoft Help and support has stopped working (Vista)
Well basically I get the screen of Windows security alerts reminder (would like to disable the account of the user control to pass his remarks). So I thought, what the hell I'll click the blue how to help my computer control user account. So that's what I get and I'm scratching my head to make it go away! Suggestions:
Signature of the problem:
Problem event name: APPCRASH
Application name: helppane.exe
Application version: 6.0.6001.18000
Application timestamp: 4791945e
Fault Module name: apss.dll
Fault Module Version: 6.0.6001.18000
Timestamp of Module error: 4791a 630
Exception code: c0000005
Exception offset: 0001ca6b
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160
Read our privacy statement:
Hi Msalice,
Welcome to the Windows Vista answers Forum!
I have a few questions about your question:
(a) when exactly you receive the error?
(b) how long have you encountered the problem?
(c) have you installed the Windows updates or software installed
You can try to disable user account control. Follow the below given steps:
1. open user accounts by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
2. click on turn on UAC enabled or disabled. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. Select the check box to turn on UAC, or clear the checkbox to disable UAC use User Account Control (UAC) to help protect your computer , and then click OK.
For more information, please visit the below given link:
Enable or disable the User Account Control
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off
You can also try a system restore to set the system to a point where it was working fine.
To restore the operating system to an earlier point in time, follow these steps:
1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
If you are prompted for an administrator password or a confirmation, type your password or click on continue.
2. in the System Restore dialog box, click on choose a different restore point and then click Next
3. in the list of restore points, click a restore point created before you started having the problem, and then click Next
4. click on finish
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
For more information, please follow the below given link:
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212/
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Journalist of prevalence has not stopped working (Vista)
Vista, home premium 6.0 service pack 2. I bought AVG antivirus 2011 version 10.0.1382. I've updated my AVG in early 2011, just recently, I get this popup permanently. I saw in a suggestion of AVG forum thread to go to link scanner and turn off the "enable reporting", this option is not in my AVG. Is there a software patch or update for this problem?
Hi ChrisSchwieters
As the issue is related with AVG you need to contact them for help on the issue. Refer to the below help links -.
http://www.Avg.com/us-en/support
http://www.Avg.com/us-en/support-home
I hope this helps.
-
Original title: Windows Update stopped working Vista Home Basic.
HP laptop 550 Vista home basic 32-bit. Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.
Hello
Question: Windows Update has stopped working
1. do you get an error message when you try to update?
2. were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below.
The problems with the installation of updates (Windows Vista)
Question: display Error Code 43 adapter has stopped the unit
Run the Fixit and check if it helps.
Hardware devices do not work or are not detected in Windows (Fixit)
Hope this information helps.
Maybe you are looking for
-
110 - 000z: DVD/CD player not working not not Windows 10
I got 10 Windows installed on my pc. Now my DVD will not work. It worked before I installed it. Could someone tell me what the problem is.
-
How can I get a version of labview for customers running?
Hi all I have a program that runs in the labview. Customers want to run this program without having to purchase a full version. Is there a version running for labview? See you soon,. Baicy
-
activation of the operating system
Family Vista premium 32-bit installed on the new hard drive and I don't have a product code and the o/s on my compaq nc6400 when I bought it has xp pro 32 bit how can I activate windows
-
Deleting tasks Outlook Express email incorrectly.
I am trying to delete an e-mail message to the wrong address. Whenever I get in Outlook Express, it try to send these messages again and again and again... He told me that 2 tasks are not completed and see the part of the error. I watch the error
-
Are there drivers for Officejet 8500 A910 2008
I am trying to install an Officejet Pro 8500 A910 on a 32-bit of Windows 2008 Server. Are there drivers for 2008?