Spooler SubSystem app consumes all CPU.

I am running Windows 7 64-bit OS.  Can not print, but of course, the system is extremely slow for all functions.

Hi Artie,.

1. did you make any changes to the computer before the show took place?
2. do you get an error message?
3. the problem only occurs when printing?

Method 1
I suggest you to run the fixit from the following link:

Difficulty of Windows system performance slow computer problems
http://support.Microsoft.com/mats/slow_windows_performance/en-us

Method 2
Try the steps from the following link in order to improve the performance of the computer.
How to make a computer faster: 6 ways to speed up your PC
http://www.Microsoft.com/atwork/maintenance/speed.aspx

Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

Method 3
Check if the problem persists in the boot.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note:
follow step 7 clean boot KB929135 article to reset the computer in normal mode.

I also suggest you to provide more recent events Viewer logs.

Open event viewer
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

Tags: Windows

Similar Questions

  • Spooler subsystem app making more than 50% CPU all the time?

    Spooler subsystem app making more than 50% CPU all the time?

    -------------------

  • Spooler SubSystem App process in Windows consumes a large amount of memory

    Hello

    I have HP B110a (all in a single combo)

    The system is Windows 8.1

    Drivers - HP's new web site.

    There is no problem of instalation and connection via USB and wireless.

    But I noticed a problem with the Wi - Fi - process Spooler SubSystem App (spoolsv.exe) consumes a large amount of RAM memory, it has even 1, 5 GB! I note that the C:\Windows\System32\spool\PRINTERS catalog is empty - it happens when the printer is in sleep mode, not printing or scanning.

    Problem does not occur for the USB connection.

    Any advice? I think that this is a problem in the printer driver.

    I will be grateful for your help, because I can't use all the features of the device.

    Best regards, Masson

    Hi man,

    I understand that you have all the features of your HP B110a. I recommend that you use printing HP and doctor Scan.

    HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems. HP recommends that you run the tool every time that you need to solve a problem.

    Printing and scanning doctor diagnoses and resolves common printing, scanning and connectivity problems, including:
  • I got the error message "Spooler subsystem app stopped working and was closed".

    I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

    Hello

    You should probably check with Support from Adobe and their communities and Forums in case
    There are known problems.

    Adobe - Support
    http://www.Adobe.com/support/

    Adobe - communities
    http://www.Adobe.com/communities/

    Adobe - Forums
    http://forums.Adobe.com/index.jspa

    ====================================

    Check with the printer manufacturer for updated drivers and support for known issues.

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    The value of all Services back to their default values.

    Start - type into the search box-> Services find top - make a right click on - RUN
    AS AN ADMINISTRATOR

    BlackViper - for Vista SP1 - Services - all return to their default values.
    http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

    BlackViper - for Vista SP2 - Services - all return to their default values.
    http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • States of error Spooler SubSystem App does not work when I print

    When I try to print anything it either tells me that the Spooler SubSystem App does not work.  How can I fix it.  I have reloaded my printer, but still does the same thing.

    Hello

    Check with the printer manufacturer for updated drivers and support for known issues.

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    The value of all Services back to their default values.

    Start - type into the search box-> Services find top - make a right click on - RUN
    AS AN ADMINISTRATOR

    BlackViper - for Vista SP1 - Services - all return to their default values.
    http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

    BlackViper - for Vista SP2 - Services - all return to their default values.
    http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Error in the Spooler subsystem App 0x000006ba

    Found this same problem on answers back in 2010.

    My OS is Windows Vista Ultimate 64.

    Do not have this problem in the 2 years of the life of this PC.

    Try printing and Spooler subsystem App error 0x000006ba. Error of Job Status window Interface also.

    Worked on the resolution of this problem for more than 7 days.

    The Lexmark printer is connected to the wireless router.

    PC n ° 1 with this problem is connected to a Lexmark printer by USB and to the router by cable.

    PC #2 is connected to the router via cable and can print on Lexmark without any problem.

    PC #3 and #4 PC is wireless to the router and can print on Lexmark without any problem.

    I have uninstalled and installed the software Lexmark times more than I can count. After the uninstallation ran I used search and remove related files from Lexmark.

    All PC #1 and Lexmark drivers are up-to-date.  Latest firmware in the Lexmark. I restored the factory default Lexmark printer.

    All Windows updates have been checked twice a day and all the new updates installed.

    I ran difficulty he printer Microsoft and test files. Test the printer shows no problems spooler.  File test found problems once, then no more after that.

    The Lexmark printer icon sometimes disappears from the printer configuration Page.

    After the attempt to print and get the spooler error, the printer indicates a job pending.  I can not cancel this job and it connects the printer so that other computers can not print with current work on PC #1.  Sometimes I stop PC #1 pending work disappeared. Other times, he is not missing.

    I searched the web looking for a solution and all Microsoft. Nothing works.

    Heeelllllllpppppp!

    Hello

    Check with the printer manufacturer for updated drivers and support for known issues.

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    Print Spooler service
    http://www.blackviper.com/WinVista/services/Print_Spooler.htm

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------

    Check with Lexmark Support and drivers

    Lexmark - Support
    http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

    Lexmark - drivers
    http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Spooler subsystem app has to stop

    I've used two different 'fix it' programs on the application subsystem spooler who said he fixed it, but it will maybe print once and then comes back to the same problem.  Help!

    Hello

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    Print Spooler service
    http://www.blackviper.com/WinVista/services/Print_Spooler.htm

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Spooler subsystem app error message when you try to print. then my computer launches the printer offline

    I tried to delete all software, including drivers and then reinstall but have had absolutely no success. I should mention that I use a Lexmark printer and supposedly there are hidden drivers files that cannot be deleted. Any help would be appreciated

    Hello

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    Print Spooler service
    http://www.blackviper.com/WinVista/services/Print_Spooler.htm

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------

    Check with Lexmark Support and drivers

    Lexmark - Support
    http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

    Lexmark - drivers
    http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I get a Spooler Subsystem app error. I have XP SP3. I tried several fixes no work no matter who else getting this error?

    I have a Canon MG5220 printer.  I can print from my wireless on my laptop that runs windows 7.

    Hello

    1. What is the full error message?
    2. All changes made to the computer before the show?
    Check out the link and follow the steps.
    You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
    http://support.Microsoft.com/kb/810894

    Important registry This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  • Spooler subsystem app has encountered a problem.

    HP Laserjet 1020 printer does not work.  Have used this printer for years.  Last print job has stopped the printing process and give the spooler subsystem app has encountered a problem error message.

    Used Mr. Fixit.   Have the print spooler service manually restarted and the RPC service. When I try to print, Spooler Subsystem App Error message appears and printer spooler stops,

    OS is XP Home Edition Service Pack 3.

    Cannot remove hardware HP Laserjet 1020 and reload HP Laserjet 1020 download did not fix problem.

    Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

    AntiMailware MalwareBytes
    SUPERAntiSpyware

    Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

    Cleaning of printers

    NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

    A. Clean on print jobs pending

    • Open a command prompt window (start > run > cmd > OK)
    • Type the following in the black command prompt window, and then press ENTER after each line

    net stop spooler
    del/q '% windir%\system32\spool\PRINTERS\*.* '.
    net start spooler
    output

    B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

    A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

    Open a command prompt window (start > run > cmd > OK)

    Type the following in the black command prompt window and press enter

    dependent on the spooler of sc config = RPCSS
    output

    Note that there is no space before the =

    If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

    Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

    Use of SuperAntiSpyWare found two serious problems.  Could cross printer of pending work.  Printer works fine.  Thanks for your reply and advice.

    Best regards

  • Spooler SubSystem App error in windows xp

    I am running windows xp and have had a HP photosmart printer installed for over a year. From now on I get the error: Spooler SubSystem App has encountered an error. I can print the screen and print from IE8, but whenever I try to print from Adobe Pagemaker I get this error.

    Adobe has a forum for all their products, including PageMaker:

    http://forums.Adobe.com/community/pagemaker_general

    I've never seen your problem, but if you search the forum Adobe PageMaker for:

    Spooler Subsystem App

    You will see that you are not alone and find some discussions that involve more than one printer HP and PageMaker and maybe some of these ideas will be a source of inspiration or help.

    If you find nothing inspiring, I post there and see what they have to say.

    Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • Error message Spooler SubSystem App

    Hi - my computer has received an automatic update from Microsoft some time this morning and now I get the following message appears and cannot print: "Spooler SubSystem App has encountered a problem and needs to close.  We are sorry for the inconvenience. "I'm lost as how to solve this problem. Can you help me?

    See how it works:

    We are going to stop the Print Spooler Service and delete any backup up/stuck/in waiting it for print jobs and restart the Print Spooler Service.

    To clear the print queue, stop the print spooler service and delete all the pending print files.
       
    You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
          
    To stop the Print Spooler Service, click Start, run and enter in the box:
           
    services.msc
           
    Click OK to open the Services Applet.
           
    Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
       
    The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
       
    If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

    Do not try to start or restart the Print Spooler Service again...
       
    Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
       
    Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
       
    C:\WINDOWS\system32\spool\PRINTERS
           
    Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
           
    Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
       
    After the reboot, check again the spooler service for printing and the 'Status' column for the print spooler must be read "started."

    Submit new failure of print jobs.

  • Keep to spooler subsystem app error message.

     
    I get an error message which announces that windows are closed spool subsystem app for reasons of security sikke, all printers are removed from my computer and it is not possible to install new, Microsoft can fix or should I switch to mac computer where this problem does not occur

    Hi lille lt.

    1. What is the full error message that you receive?

    2. don't you make changes on your computer before this problem?

    3. when exactly you receive this error message?

    You can follow this link & check if the problem persists.

    You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

    Hope the helps of information.
    Please post back and we do know.

  • Spooler subsystem app has a problem and needs to close and... .instructions @ 0x0041003d referenced memory @ 0x0041003d memory could not be read.

    I have windows xp svc pack 3. I have 2 printers hp psc 2410, samsung ml2010.  I've never had a problem until recently, and now I get 2 messages all the time... the spooler subsystem app has a problem and needs to close and... .instructions @ 0x0041003d referenced memory @ 0x0041003d memory could not be read.  Whenever I try to print my computer crashes. I tried to uninstall and reinstall the two printers.  no luck.  I tried mrfixit and when it comes to the printer part, mrfixit seems stuck in a loop and it is doing nothing more than an hour.  no luck.  I paid for norton antivirus, thinking it was a virus. no change.  paid for advanced system optimizer. no change.  Now that?

    Hi MarthaForner,

    You can read the following article and check if it helps.

    You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  • Spooler subsystem app stopped working and was closed.

    When spooler subsystem app stopped working and was closed, which is causing this problem and how can I reinstall it and continue to use my computer, I installed a new program on my computer?

    Hello
     
    1. What is the name of the program you are trying to install?
     
    2. you receive an error code?
     
    3. what happens when you try to print?
     
     
    Please follow the links below to solve the problem.
     
    Method 1
     
    In Windows Vista:
     
    a. click on start
     
    b. click Control Panel, click programs and features,
     
    c. click on Turn Windows features on or off, expand Print Services, clear the LPR Port monitor check box and select the Internet printing Client, and then click OK.
     
    If the steps are still not then continue to.
     
    Method 2
     
    This problem may occur if a printer driver that is installed on the computer is damaged.
     
    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 how to back up and restore the registry in Windows
    To resolve this issue, delete the printers and drivers for printers, then remove the items that are under certain keys in the registry. Follow these steps:
     
    a. If possible, remove all of the printers that are listed in the Printers window.
     
    To remove a printer, right-click the printer in the Printers window, click Remove, and then click Yes to confirm the deletion.

    (b) in the Printers window, on the file menu, click Server Properties.
     
    c. on the tab drivers, remove all the installed printer drivers.
     
    d. to remove a printer driver, click the driver, click Removeand then click Yes to confirm.

    Start the registry (Regedit.exe) editor.
     
    (e) export the following registry keys:
        HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print
       
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print
       
    f. remove all items listed under the following keys (do not delete the keys themselves):
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-2
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3

    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-2

    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-3

    g. remove all items listed under the following keys by default:
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
       
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Monitors

    The list of default monitors includes:
    AppleTalk printing devices (when Services for Macintosh is installed)

    BJ language monitor
    The local port
    PJL language monitor
    Standard TCP/IP port
    USB Monitor
     

    "Windows NT Fax Monitor (if a Fax Modem is installed)"
     
    For more information on the items are not by default, click on the number below to view the article in the Microsoft Knowledge Base:
     

    h. remove all items listed under the following keys:
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
       
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Printers
    I. close the registry editor.
    J. restart your computer and reinstall the necessary printers.
     
    I hope this helps.
     
     

Maybe you are looking for

  • Apple Watch emergency

    The new watch OS is so amazing. But I want to tell you guys about the new mode of emergencies. Why the watch cannot pretend and send to 911 on your health statistics? I would find so nice detect no. or stop blood pressure and call 911 automatically.

  • I don't have the email account with which I first signed

    How can I change the e-mail account, with I first signed and keep all my old modules and settings? My old e-mail address is invalid, so I do not remember my old password cannot access my account to verify an add on I try to download for Snaggit (scro

  • Lost drivers for Satellite Pro L10 etc - where to get the software?

    I had to reinstall windows xp on my Satellite Pro and have managed to install drivers etc for evrything but the WiFi. Device Manager displays an error of the pilot against Ethernet controller and although the Wifi light is on it does not appear anywh

  • Satellite L750D system stops unexpectedly

    My Satellite 750 D is about 1 1/2 years and for about two months, he has developed this habit simply turn off the entire system as if I pressed the power button or surprisingly cut energy.The sound he does is something like a whistle made his last.I

  • continuous performance counter data

    Hi all I need assistance in the collection of data from a counter entry. I have a flow sensor that creates an output up to 600 Hz. frequency I plugged on the entry of a counter on my DAQ hardware, and in Labview, I plugged the DAQ assistant to a curv