Spooler subsystem app error (spooler does not)

Similar Questions

• Installation of the printer. error: "printer spooler does not.

  Original title: printer Installation

  Windows XP SP3 home edition:

  Software printer installation error message, "printer spooler does not" no printer is installed or deposited.

  This suggestion can help.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• My canon iP4300 not work on64 bit XP said ' print spooler does not.

  I recently changed my computer until I ran a system of 32-bit xp and now Iam updated to xp 64 bit system and my previously fine printer will not work. The message arrives:-"print spooler does not" ideas?

  Hello

  Step 1: I suggest you to download and install the driver appropriate from the following link:

  http://software.Canon-Europe.com/products/0010386.asp

  Step 2: Try the procedure described in the following article:

  "You can not print and you receive the error message"Spooler subsystem app has encountered a problem and needs to close"": http://support.microsoft.com/kb/810894

• Print spooler does not

  all my printers have disappeared.
  It won't let me uninstall it it says that the print spooler does not work?

  Hello

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer
  (check with the manufacturer for the latest driver).

  Check Mr. Fixits here and if you must use other methods to go back
  and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - you can find at the top of the list and do a RIGHT CLICK.
  RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type in the Find box-> Services find at the top of list - make right click on-
  RUN AS ADMIN

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Print spooler does not start

  I have problems printing due to the fact that the print spooler does not start even after restart pc & try manually in the services, there he gives me error 1053. It is configured to start automatically in the print spooler box, so I don't know.

  Hi Wobblesmf,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it seems that the print spooler does not start.

  However, we need more information about the issue to help you better.

  Please help me to answer these questions.

  1. what version of Windows are you using?

  2 have had any changes made to the computer before the question?

  Visit the link for the operating system that you use:

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  I have this link which should guide you in the right direction.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The steps mentioned in the link is for Windows 7. You can change the version of the operating system in the same link by clicking on the button beside Windows 7 drop-down and select the one that you use.

  Using the windows-related issues feel free to post on Microsoft Community.

• MPrint spooler does not not on my Windows XP

  My print spooler does not work on my windows xp. I tried to restart on the way to the print spooler service and click Start, I get an error 1068, when I try to run the software for my Office jet 5780, which he continues to stop the print spooler does not and when I click fix, that nothing is happening, anyone have any ideas. Thank you

  Hello kiltoony,

  The first thing that we should use in the resolution of printing problems are scanning HP Print doctor.

  Doctor Scan HP printing can be found by going to http://www.hp.com/go/tools that the doctor is used to solve the various problems that can occur that cause the printer to not print, scan or have problems of global connectivity. It is the first tool when you troubleshoot any problem that belongs to these three compartments, it is help to solve the problem or point us in the right direction with regard to the origin of the problem.

  After running the Print Scan Doctor let me know the results and if he sees any problems.

• Spooler does not, file not found

  I have the error message on the server print spooler does not. When I go and tell him to start, I get a second error message saying that the system cannot find the specified file.  What should I do?

  Hi vicki Koehler,.

  Thanks for posting in the Microsoft community.

  If I understand correctly that you face the printer to the issue, and you receive an error message on the server print spooler does not.

  Before you start the troubleshooting steps, I need the information required.

  1. What is the brand and model of the printer?

  2. have you made any changes to the computer?

  To work around this problem, restart the print spooler service, or restart the computer. To restart the print spooler service, use one of the following methods of the link and check.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  See also:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Printer spooler does not work for a single user on the network printer

  original title: very different printer problem

  I have a HP deskjet printer shared from a PC on the network.
  I was informed of a single person could not access error poped by saying "printer spooler does not work.
  I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
  Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!

  If I move my computer witch would allow me to print before there where his computer is my computer prompt same error

  My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network

  Just not this printer

  The computer on the share is is a windows xp sp2 workstation

  The computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.

  My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.

  My next step is to hang the printer until a print area and assign an IP address and finish with the share.

  (Still not sure if it would help or not)

  Any advice is welcome thanks

  It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.

  Hung new switch and all computers works fine now.

• I'm unable to install a printer - print spooler does not

  I have a problem with the PC.  No printer is displayed in the Control Panel printer page. When I try to add a printer the message tells me that the print spooler does not work.  Can I also book error code: "error 0x000006e". I tried all the usual bugs without success.  Gives the print spooler to think it's on; I have reset several times and it shows, but the message I get when trying to add a printer says that it does not work.  I have attached the sfc/scannow process found no corrupt files. I tried a 'restoration' without success.

  The laptop can find the printer, a Canon Pixma MP 550 and it works well but the PC just cannot find all printers in the control panel or through different programs (WORD, etc.) and will not let me add a few.  The home network seems fine and both recognize each other and I can access files on the other computer.  But on the PC, there is no printer on the network.

  Grateful for the advice.  All the usual bugs have been tried.

  Also, I tried the canon Pixma MP 550 "My Canon" routine Diagnostics.  It did not find the printer even when it is plugged directly into the PCUSB slot.  This could be a problem of LPT 1?  So, I don't know how to access the LPT to reconfigure.

  I also opened OUTLOOK and WORD and tried to add a printer in this way, but I get the message: "the Active Domain Services are currently unavailable.

  Grateful for any help here.

  Concerning

  I found this link to Arthur Xie that worked:

  http://social.technet.Microsoft.com/forums/Windows/en-us/3e47b7b6-00A3-47E1-9e28-e615fbff5f87/cant-add-printer-print-spooler-crashes-error-code-0X000006BE?Forum=itprovistaprinting

  It seems that there are some conflicts of registry HiKey.  Following his procedure got all printers on the control panel/devices and printers screen and allowed me to download the current driver.

  Thanks to all who have helped me to the right solution. Restore point created now.

  Grateful and TY Arthur Xie.

• h p 720C print spooler does not run in win 7 64 bit

  HI - after you have installed Windows 7 Home premium, I can't the printer above to run. The windows version is saved and the updated printer driver has been installed according to the requirement of Windows. The error tells me that the spooler does not work although I have checked the settings and let the spooler performance also the machine has been restarted twice now.

  Hello

  Thanks for the reply.

  Uninstall and reinstall the printer and check if it helps.

  Add or remove a printer

  (Applies to Windows 7)

• Print spooler does not. Unable to use printer

  Cannot print.  Cannot add a printer.  Can't download new drivers.  C:\WINDOWS\SYSTEM32\SPOOLSV. EXE is a program that does not work.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• Printer Hp5510 crashed. Software removal - tried reinstalling. Cannot install printer Message "print spooler does not work - what's up."

  Hi all

  Need help

  Hp5510 locked

  I works fine when connected to my laptop - but-not when it is connected to Compaq Presario desktop mu

  Software removal - tried reinstalling. Failed to install.  printer Message "print spooler does not work - what's up."

  ↑ hanks

  Scott

  Consult HP printer experts found in the HP printer Forum.

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• Windows 7 printer spooler does not start

  just my printer spooler does not start in Windows 7.  I received a message that the spooler wasn't running when I tried to use it today.  I used the printer for a few days. "net start spooler" fails from the administrator command prompt.  I checked that the CPP is running.

  I installed SP 1 yesterday with success, but I went back to the restore point, but still, the spooler does not start.

  The system acts as the spooler is missing.

  How can I solve this problem?

  Thank you

  Jim

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Locate bridge end RPC Mapper in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Repeat the procedure for DCom server process Launcher.

  It is always sensitive in this situation to achieve a malware check.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

  Currently, this is a good combination that seems to detect more malware, but it can miss the malware as all security software can do.

• MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  I when even run some dos applications, which allows to work ok under XP mode full-screen, but when you use Vista or Windows 7. I can only rum these applications in a window.
  The error message is

  MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  Please is anyway I could run in fullscreen... I don't want to use a virtual machine.

  Any advice would be greatly appreciated

  Of Ernest24

  http://www.dosbox.com/

  You might be interested in reading about DosBox.

  See you soon. Mick Murphy - Microsoft partner