Spooler SubSystem App has encountered a problem and needs to close. We are sorry for the inconvenience.

Similar Questions

• Spooler Subsystem App has encountered a problem and needs to close

  We cannot print anything on my computer. the message is that the Print Spooler Subsystem App has encountered a problem and needs to close. How to get the print spooler to run and work my printer start?

  Hi Saeed,

  1. were you able to use the printer before without any problem?

  2. did you of recent changes on the system?

  3. What is the brand and model of the printer?

  Method 1:

  You can try to start the Fixit from the following link and check if it helps.

  Problems printing and printing errors

  Method 2:

  You can also read the following article and check if it helps.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

• Printing error: "Spooler subsystem APP has encountered a problem and needs to close."

  Original title: cannot print to the network printer.__I have a net wifi Windows XP, SP 3 and an IBM laptop.

  Printers seem to be installed (XP has the printer connected via USB) but when I try to print from IBM I get an error as follows:

  "Subsystem spooler APP has encountered a problem and needs to close."

  The printer is a HP Deskjet D2660 and the LAN is configured correctly by using the wizard.

  I also discovered that the print spooler is never started.

  In addition, even when I start the spooler it remains not said during the next time I start up.

  Can anyone help? I've been banging my head for two weeks.

  Salvation;

  Thanks for responding.

  My IBM ThinkPad running XP - Pro

  My computer is a DELL and running XP-Home Edition

  Printer installed on DELL

  I have a WIRELESS LAN installed by the installation wizard. The net works fine except for the printer.

  Every time I start the spooler does not work. If I set the spooler of runing the choice is never registered. the next time I start up, the spooler does not work.

  I finally asked some experts to solve the problem of no access to the network printer. It took them more than 4 hours (for a cost) to make it work. Everything was going well until the next day. The problem is back. My thought is that the register should be updated so it will retain the corrtions.

  I downloaded the MATS_RUN.printing.exe utility. It corrects everything except this message on the Spooler subsystem.

  Any advice you can give me would be greatly appreciated.

• Spooler subsystem app has encountersd a problem and needs close__

  Spooler subsystem has encountered a problem and needs to close

  Spooler subsystem has encountered a problem and needs to close

  See http://support.microsoft.com/kb/324757

• Error message Popup Wuauclt.exe has encountered a problem and need to close. Send the error message or not. I've done both and can't get this popup go away

  A few days ago, I downloaded SP3 on my windows XP computer. and update the windows installer, eversince, then I have a reception an annoying popup message, which reads as follows: Wuauclt has encountered a problem and needs to close > we're sorry for the inconvenience. SEND a MESSAGE ERROR / DON "T SEND I have highlighted both send and not a thousand times and can't get rid of this annoying popup."
  What can I do

  Hi AgnesBradshaw,
   
  Follow the steps in the article to resolve the problem:
   
  Error messages when you start a Windows XP-based computer and then try to download Windows updates

• I get the error "Generic host process for Win32 services has encountered a problem and needs to close."

  Original title: I'm under Win XP Pro 64-bit with an amd processor.

  Hi all

  I get "Generic host process for Win32 services has encountered a problem and needs to close" when I first start the computer, the sound works, but after the old generic host appears the sound does not work?  Don't forget that I'm running 64-bit software.

  The search does not work.

  Any help would be great.

  Hi bohawk,

  I got to hit this article the error that you are experiencing with your computer. Refer to the same thing, check if the patch is useful.

  I hope this helps. If this isn't the case, answer so we can look for other options.

• Fable3.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  I just downloaded this twice, tried validating the Cahce / Defraging he... Nothing has worked so far.

  Hi justinlelie,
   
  Here are some articles that might help you to solve the problem:
   
  Error message when you start Fable: The Lost Chapters: "Fable has encountered a problem and needs to close."
   
  Fable the last chapter hangs or triggers an error message when you start the game: "we're sorry, but we have detected that the game not come out correctly." We recommend that you start the game in safe mode.

• Spooler subsystem app has encountered a problem.

  HP Laserjet 1020 printer does not work.  Have used this printer for years.  Last print job has stopped the printing process and give the spooler subsystem app has encountered a problem error message.

  Used Mr. Fixit.   Have the print spooler service manually restarted and the RPC service. When I try to print, Spooler Subsystem App Error message appears and printer spooler stops,

  OS is XP Home Edition Service Pack 3.

  Cannot remove hardware HP Laserjet 1020 and reload HP Laserjet 1020 download did not fix problem.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Use of SuperAntiSpyWare found two serious problems.  Could cross printer of pending work.  Printer works fine.  Thanks for your reply and advice.

  Best regards

• In XP randomly receive error message "Windows Explorer has encountered a problem and needs to close"

  I get the error message "Windows Explorer has encountered a problem and needs to close".
  It occurs at any moment while I'll do something on my computer.
  The signature of the error is,
  App name: explorer.exe
  App version: 6.0.2900.5512
  The mod name: unknown
  Mod Version: 0.0.0.0
  Offset: 4ec683bd

  After the error message appears and I click 'send or do not send', everything on the screen refreshes, & I have to reset some programs.

  I am unable to do a system restore to solve the problem because I have no good restore point before this problem occurs. He began to occur initially in Jan 2011 & I can't go to a restore point of return in 2010.

  Can someone please?

  * original title - I get an error message "Windows Explorer has encountered a problem and needs to close". It's a little different from the others I found the message communautaires.*

  Hi Jaaz76

  
  Method 1:

  You can perform a security analysis and check if there are viruses or malware present. Check out the link below to run the scan and check if this helps-

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Method 2:

  Also I suggest you perform a SFC scan and check. To Perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  b. type the following command and press ENTER:

  sfc/scannow

  c. a message indicating that "the system scan will start. Be patient, because the analysis may take some time

  d. If all files require a SFC replace will replace them. Hopefully though you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/310747

   

  I hope this helps.

• 0XC0000005 error printing "Lexmark Web gateway has encountered a problem and needs to close"

  0xc0000005
  Recent problems with my Lexmark X 7675.  After printing, I get an error message that says:

  Lexmark Web gateway has encountered a problem and needs to close.

  I think it's a problem with the latest Windows updates.  I use XP SP3 and that you have not seen this problem until this last week.

  Find C:\WINDOWS\system32\spool\drivers\w32x86\3\lxdwwbgw.exe and delete or rename it so that it does not work.

  This program sends just the stats of the printer for Lexmark.

• Issue of games - exe has encountered a problem and needs to close

  Hello world

  I was wondering if there was someone out there who could help me.

  I can load a game on my laptop (demanding nothing, just football coach) but when I then open the game when loading I get the following message

  "(whatever_the_game_is).exe has encountered a problem and needs to close." We are sorry for the inconvience.

  Can anyone recommend a way to resolve this?

  Thanks in advance

  Rich

  Hi Rich

  Using original or copy?

• I installed OS 10.10.5 and MS Office 2011 give me an error message "word has encountered a problem and needs to close."

  iMAC 27 "16 GB memory; 2.66 GHz; Hard drive GB 999; running IOS 10.10.5

  Problem arises when you try to use Microsoft Office 2011; Error message "this office (word, excel, ppt) has encountered a problem and needs to close."  This happens because it attempts to open all programs... Word, excel, power point.

  I uninstalled 2011 MSoffice and recharged using my home and student version of disk 14.6.1522; same problem

  You may need to upgrade to MS office 2016. It cannot be supported by Yosemite.

  Hope It helps.

  AppleMan

• HPSF.exe has encountered a problem and needs to close

  using pavilion hp Elite desktop, windows 7 Edition 150ff Home premium, receive a HPSF error message. EXE has encountered a problem and needs to close. I tried to download it again from the HP website, but I get a message saying "your system does not meet the minimum requirments for this update, update has been cancelled. (1602) my computer has a hard disk of 1 terabite with 8 GB of ram and I have very little installed above with the exception of 4 songs and microsoft office and student that I bought and Norton Internet Security.

  Someone can tell me why I get this message and how do I fix the problem, my office is wired but my printer is wireless, I have high speed internet and I have also a HP Envy 700-019 again at Christmas last year, which has a HD 2 terabite with 12 GB of ram and windows 8, desktop computers are 64-bit. Not used at the same time.

  This message means that the HP Support Assistant had a problem.

  I recommend to uninstall the application from the--> utility Control Panel programs & features and then put it back. You can use the charm of the search and the type of programs & features. Click on the above icon to call the utility.

  You can reinstall from the Recovery Manager.  Invoke the charm of the search and type in recovery and click the icon.

  

  Find the Recovery Manager from the list of drivers and applications and put a checkmark in the box to the left and then click install in the lower right corner.

  

• "WMI has encountered a problem and needs to close."

  Windows Server 2003 SP2 (virtual server) get this popup error every few minutes: "WMI has encountered a problem and needs to close."
  In the application log:
  Source: Application error
  Event ID: 1000
  Category: (100)
  Failing application wmiprvse.exe, version 5.2.3790.4455, failed module ntdll.dll, version 5.2.3790.4937, address 0x000415f7 failure.

  Any ideas?

  Hello

  Your question is about Windows Server 2003 SP2. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
  I hope this helps!

• the application has encountered a problem and needs to close

  I build the LV, a request using the tabs, the FPGA dll and DLLs that communicate with devices CAN, GPIB, and PCI.

  The apears program to work properly, but sometimes and I can't see the patern, it crashes with the error "the application has encountered a problem and needs to close...". »

  Sometimes the error apears when I'm trying to exit the program, other times it hangs before that.

  I can't find the error because the program can work well for several hours and then crash or it hangs after 5 minutes of work with it.

  Clues about what goes wrong?

  Kind regards

  Daniel Coelho

  I'm still going through the example, but since the error ocours sporadicaly this could take some time to identify the error.

  I was browsing the code and I was wondering about simple things, like:

  -J' have many local variables, could it be the cause protected by some kind of error?

  -Since I use dll on my code, is there a way to make sure that all DLLs are loaded and unloaded properly?

  My program has a TAB with a simple UI of TestStand and when I change the tabs I close the user interface for teststand. When I use this UI I have load and unload DLLs of same that I use on other tabs, i. e., when you use the UI I load all DLLs that communicate with devices and when I change the tabs I unload all DLLs because on each separate TAB I can control these indicidually devices.

  It's a little hard to explain, but I think I managed

  Is there a grain of truth on my questions? If so, what could I do?