Spooler subsystem app has encountered a problem.

Similar Questions

• Spooler SubSystem App has encountered a problem and needs to close. We are sorry for the inconvenience.

  Spooler SubSystem App has encountered a problem and needs to close.  We are sorry for the inconvenience.

  Hello

  1. When you get this error message?

  2. that you get this error message when printing?

  3. What is the brand and model of the printer?

  4. don't you make changes to the computer before the show?

  Please provide us with more information on this issue to help you best.

  If you get this error when printing, follow the steps from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/810894

• Spooler Subsystem App has encountered a problem and needs to close

  We cannot print anything on my computer. the message is that the Print Spooler Subsystem App has encountered a problem and needs to close. How to get the print spooler to run and work my printer start?

  Hi Saeed,

  1. were you able to use the printer before without any problem?

  2. did you of recent changes on the system?

  3. What is the brand and model of the printer?

  Method 1:

  You can try to start the Fixit from the following link and check if it helps.

  Problems printing and printing errors

  Method 2:

  You can also read the following article and check if it helps.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

• Printing error: "Spooler subsystem APP has encountered a problem and needs to close."

  Original title: cannot print to the network printer.__I have a net wifi Windows XP, SP 3 and an IBM laptop.

  Printers seem to be installed (XP has the printer connected via USB) but when I try to print from IBM I get an error as follows:

  "Subsystem spooler APP has encountered a problem and needs to close."

  The printer is a HP Deskjet D2660 and the LAN is configured correctly by using the wizard.

  I also discovered that the print spooler is never started.

  In addition, even when I start the spooler it remains not said during the next time I start up.

  Can anyone help? I've been banging my head for two weeks.

  Salvation;

  Thanks for responding.

  My IBM ThinkPad running XP - Pro

  My computer is a DELL and running XP-Home Edition

  Printer installed on DELL

  I have a WIRELESS LAN installed by the installation wizard. The net works fine except for the printer.

  Every time I start the spooler does not work. If I set the spooler of runing the choice is never registered. the next time I start up, the spooler does not work.

  I finally asked some experts to solve the problem of no access to the network printer. It took them more than 4 hours (for a cost) to make it work. Everything was going well until the next day. The problem is back. My thought is that the register should be updated so it will retain the corrtions.

  I downloaded the MATS_RUN.printing.exe utility. It corrects everything except this message on the Spooler subsystem.

  Any advice you can give me would be greatly appreciated.

• Spooler subsystem app has encountersd a problem and needs close__

  Spooler subsystem has encountered a problem and needs to close

  Spooler subsystem has encountered a problem and needs to close

  See http://support.microsoft.com/kb/324757

• Spooler subsystem app has a problem and needs to close and... .instructions @ 0x0041003d referenced memory @ 0x0041003d memory could not be read.

  I have windows xp svc pack 3. I have 2 printers hp psc 2410, samsung ml2010.  I've never had a problem until recently, and now I get 2 messages all the time... the spooler subsystem app has a problem and needs to close and... .instructions @ 0x0041003d referenced memory @ 0x0041003d memory could not be read.  Whenever I try to print my computer crashes. I tried to uninstall and reinstall the two printers.  no luck.  I tried mrfixit and when it comes to the printer part, mrfixit seems stuck in a loop and it is doing nothing more than an hour.  no luck.  I paid for norton antivirus, thinking it was a virus. no change.  paid for advanced system optimizer. no change.  Now that?

  Hi MarthaForner,

  You can read the following article and check if it helps.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

• IDT Audio system tray app has encountered a problem - sttray.exe and lack of Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll entry: RUNDLLEntry at Windows startup.

  Dell Dimension E510 system was crushed by a virus. The files were dumped, authorized reader and a reload fee system has been done. When all files have been charged and the system is recovered, the following errors began to appear at startup:

  -IDT Audio system tray app has encountered a problem - sttray.exe and

  -Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll Missing entry: RUNDLLEntry

  I'd rather be able to clear these by using the operating system disk I hope it do not screw the system. Any ideas would be nice.

  Thank you

  Dennis Holmquist

  Hi Dennis,

  DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer, then re - install printer drivers / should solve the problem.

  Reinstall the printer. In addition, install the latest drivers from the manufacturer's Web site.

  To connect a printer directly to your computer

  Remove a printer

  See also:

  Microsoft Windows XP - add a printer attached to your computer

  RUNDLL error message

  For IDT audio error, you can install the latest audio drivers from the Dell support Web site to see if it helps.

• run a dll as an app has encountered a problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  • Ideas: when I change the theme of my computer, I get the message that executes a dll as an app has encountered a problem.
  • You have problems with programs
  • Error messages
  1. Recent changes to your computer
  • What you have already tried to solve the problem

  Solution to fix this dll error

  1. Click Start | Control Panel | Administrative Tools | Services.
  2. Right-click the System Restore Service, and then click Properties.
  3. In the drop-down list Startup Type, select disabled.
  4. Click OK.
  5. Close the tool of administration and Services Windows.
  6. Do right click my computer, click Properties and click the System Restore tab. The System Restore tab should now appear correctly; However, the system restore service will be disabled.
  7. Turn the system restore and click on apply.

• Error message: Spooler subsystem app has quit working

  I have been using Windows Vista Home Basic version for several months. After turning on my computer for several minutes, two weeks ago I received an error message "Spooler subsystem app stopped working. Then when I clicked on the solution put on internet, I was recommended to close this error message. But then another message appeared "Data Execution Prevention has closed.

  How can I solve this problem? I have not install new software at all. How is it that I get these 2 posts? Please notify.

  My email is * address email is removed from the privacy *.

  David Taylor

  Hello

  Your printer drivers have become probably either damaged or defective. Remove them and install a new download of the manufacturer of the printer. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Spooler subsystem app. has been closed to protect system

  I ran the program of Mr. fixit from microsoft site.  seemed to fix my printer, but my printer seems to work very well, came back, nothing wrong. whenever I turn on my computer I get this message even. Spooler subsystem App and had to protect close system, have no problem closing the message window.  Don't know if this is important or how to fix it.  Help!  Thank you

  Yes, I have Windows XP.  Well, when I boot message appears and I close the message and I have no problem printing.  The list of the icons in the "printers and faxes" are; HP deskjet 5600 series (and the checkbox), Microsoft XPS Document Writer, send to OneNote 2010.  I didn't know there is more than one "Mr. FixIt" program, I just followed a link that the error message was downloaded "Mats_Run.printing.exe" and opened it and keep running and it came to a point where he says that something like could not find no problem to solve.  Thanks for your help and your patience with my inexperience with this process; never been in the forum before.

  I have not seen a situation as you describe it.  Usually, when there is a problem and the spooler stops it stays down. Can you identify what happened before this problem occurred first?

  Do you use Microsoft OneNote?

  Go to printers and faxes

  Right-click on the icon for the DeskJet 5600, and then click Properties

  Click the Ports tab.

  Use the scroll bar and see if there is an entry named "send to Microsoft OneNote Port:" and, if so, if there is a check in the box for this line.

  Click Cancel to exit this dialog box.

  Do the same for the XPS Document Writer

  It might be interesting to check the programs that start automatically when you start Windows.  Download Autorunshttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx after Autoruns full analysis, as shown in the lower left corner, click the connection tab.  You'll probably at least three entries associated with HP.  Is there something else that seems to be related to printing or that looks like 'suspect' (I know that is vague; if you can't identify something, include its name in your response).

  Also take a look at the tab "print monitors.  You will probably "HP standard TCP/IP port" and perhaps "PCL hpz3143a.  There may also be a port entry Bluetooth printer here.  Anything else?

  Finally, if necessary, is listed under the tab "Winlogon".

• Spooler subsystem app has to stop

  I've used two different 'fix it' programs on the application subsystem spooler who said he fixed it, but it will maybe print once and then comes back to the same problem.  Help!

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I get a Spooler Subsystem app error. I have XP SP3. I tried several fixes no work no matter who else getting this error?

  I have a Canon MG5220 printer.  I can print from my wireless on my laptop that runs windows 7.

  Hello

  1. What is the full error message?
  2. All changes made to the computer before the show?
  Check out the link and follow the steps.
  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
  http://support.Microsoft.com/kb/810894

  Important registry This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• Error message Spooler SubSystem App

  Hi - my computer has received an automatic update from Microsoft some time this morning and now I get the following message appears and cannot print: "Spooler SubSystem App has encountered a problem and needs to close.  We are sorry for the inconvenience. "I'm lost as how to solve this problem. Can you help me?

  See how it works:

  We are going to stop the Print Spooler Service and delete any backup up/stuck/in waiting it for print jobs and restart the Print Spooler Service.

  To clear the print queue, stop the print spooler service and delete all the pending print files.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service again...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the spooler service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• Keep to spooler subsystem app error message.

   
  I get an error message which announces that windows are closed spool subsystem app for reasons of security sikke, all printers are removed from my computer and it is not possible to install new, Microsoft can fix or should I switch to mac computer where this problem does not occur

  Hi lille lt.

  1. What is the full error message that you receive?

  2. don't you make changes on your computer before this problem?

  3. when exactly you receive this error message?

  You can follow this link & check if the problem persists.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  Hope the helps of information.
  Please post back and we do know.

• Spooler SubSystem App error in windows xp

  I am running windows xp and have had a HP photosmart printer installed for over a year. From now on I get the error: Spooler SubSystem App has encountered an error. I can print the screen and print from IE8, but whenever I try to print from Adobe Pagemaker I get this error.

  Adobe has a forum for all their products, including PageMaker:

  http://forums.Adobe.com/community/pagemaker_general

  I've never seen your problem, but if you search the forum Adobe PageMaker for:

  Spooler Subsystem App

  You will see that you are not alone and find some discussions that involve more than one printer HP and PageMaker and maybe some of these ideas will be a source of inspiration or help.

  If you find nothing inspiring, I post there and see what they have to say.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!