Spotlight uses SNMP?

Similar Questions

• Using SNMP to number of requests by fax

  I wish I could use SNMP to query and track the number of pages of the fax on my CM4540 printers.

  Can someone tell me if this is possible and if so, what MIB and OID would be used.

  Thank you

  Brian

  This morning, I got my response from HP.  Here's what I learned.

  For access to archive printer MIB:

  1. go to http://h20147.www2.hp.com/sppmain/

  2. click on the link Public of Software Development Kits (SDK)

  3. Select Laserjet and Digital Sender of the Kit Area drop-down box

  4. navigate to LaserJet and Digital Sender > management of printers > printer specific MIB

  5. sort the list of Legacy printers, then select the appropriate model

  6. wait for the browser to refresh, and then click the download button

  7. save the file on your machine and review

  I tried saving and opening a without extension, seems that it is just a text file.  It looks like some are .zip.  Some are registered as .mib trying to open it in a CMD window on my machine.  None of the files I was looking at was a text for SNMP OID objects.  Perhaps you need to translate the information into an OID somehow.

  Take a look and let me know if you can make progress more or not.  Its been fun to discover all that we have learned so far.

• Using SNMP to monitor Cisco Nexus 5000

  Hello

  I would like to know what specific OID to use to monitor the following using SNMP on a Nexus 5000:

  -L' total CPU usage

  -Power supply status

  -Status of Fan chassis

  The Nexus is quite different from other devices Cisco - any help will be appreciated!

  CPU: oid to use is: 1.3.6.1.4.1.9.9.305.1.1.1 (cseSysCPUUtilization) is a part of the MIB:

  CISCO-SYSTEM-EXT-MIB

  It displays the value as a percentage of the processor.

  ME-TestBed-A (nxos) # display system resources

  Load average: 1 minute: 0.26 5 minutes: 0.41 15 minutes: 0.43

  Process: 393 1 total, running

  CPU States: inactive user of 1.0%, 4.0% of the kernel, 95.0%

  Memory usage: total 3634820K, 1728600K used, 1906220K free

  81256K buffers, 1037176K cache

  DHCP-171-69-89-49: ~ lulu-mbp$ snmpwalk - public - Cabarrus 2 c 172.25.180.5

  1.3.6.1.4.1.9.9.305.1.1.1

  SNMPv2-SMI::enterprises.9.9.305.1.1.1.0 = Gauge32 : 5

  As you can see, show sys resources indicates 95% idle, valuation is 5% cpu and the snmp poster value.

  -------------

  Power and Fans, it is fairly limited

  The cisco mib envmon is not yet supported on the 5K, looks like.

  This leaves us with the FRU mib: 1.3.6.1.4.1.9.9.117 ftp://ftp.cisco.com/pub/mibs/oid/CISCO-ENTITY-FRU-CONTROL-MIB.oid

  The index values will come from oid: entPhysicalTable)

  1.3.6.1.2.1.47.1.1.1) is part of the ENTITY-MIB

  DHCP-171-69-89-49: ~ lulu-mbp$ snmpwalk - public - Cabarrus 2 c 172.25.180.5

  1.3.6.1.4.1.9.9.117

  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.1.470 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.1.1000470 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.2.470 = STRING : « CentiAmps @ 12V »

  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.2.1000470 = STRING : « CentiAmps @

  12V.

  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.3.470 = INTEGER : 4538

  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.3.1000470 = INTEGER : 0

  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.4.470 = INTEGER : 29

  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.4.1000470 = INTEGER : 0

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.22 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.23 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.470 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.1000022 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.1000470 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.3000022 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.22 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.23 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.470 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.1000022 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.1000470 = INTEGER : 4

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.3000022 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.22 = ENTIER :-2910

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.23 = INTEGER : -83

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.470 = INTEGER : 29

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.1000022 = INTEGER : 0

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.1000470 = INTEGER : 0

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.3000022 = INTEGER : 0

  SNMPv2-SMI::enterprises.9.9.117.1.1.3.0 = INTEGER : 0

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.1.22 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.1.23 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.1.1000022 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.1.3000022 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.2.22 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.2.23 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.2.1000022 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.2.3000022 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.3.22 = INTEGER : 0

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.3.23 = INTEGER : 0

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.3.1000022 = INTEGER : 0

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.3.3000022 = INTEGER : 0

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.4.22 = Timeticks : 0:00:10.27 (1027)

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.4.23 = Timeticks : 0:01:25.20 (8520)

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.4.1000022 = Timeticks :

  (41634711) 4 days, 19:39:07.11

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.4.3000022 = Timeticks :

  (41634712) 4 days, 19:39:07.12

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.5.22 = Timeticks : (0) 0:00:00.00

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.5.23 = Timeticks : (0) 0:00:00.00

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.5.1000022 = Timeticks : (0)

  0:00:00.00

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.5.3000022 = Timeticks : (0)

  0:00:00.00

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.6.22 = « »

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.6.23 = « »

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.6.1000022 = « »

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.6.3000022 = « »

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.8.22 = Gauge32 : 0

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.8.23 = Gauge32 : 0

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.8.1000022 = Gauge32 : 0

  SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.8.3000022 = Gauge32 : 0

  SNMPv2-SMI::enterprises.9.9.117.1.3.1.0 = ENTIER : 1

  SNMPv2-SMI::enterprises.9.9.117.1.4.1.1.1.534 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.4.1.1.1.535 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.4.1.1.1.536 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.4.1.1.1.537 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.10 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.22 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.23 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.149 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.214 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.215 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.278 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.279 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.342 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.343 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.470 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.534 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.535 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.536 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.537 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4950 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4951 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4952 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4953 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4954 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4955 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4956 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4957 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4958 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4959 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4960 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4961 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4962 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4963 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4964 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4965 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4966 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4967 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4968 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4969 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5206 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5207 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5208 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5209 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5210 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5211 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5212 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5213 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21590 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21591 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21592 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21593 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21594 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21595 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21596 = INTEGER : 2

  SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21602 = INTEGER : 2

  You can read in:

  FTP://FTP.Cisco.com/pub/MIBs/v1/Cisco-entity-FRU-control-MIB-V1SMI.my

  that means values integer by OID.

  Take for example (look at the file

  ( ftp://ftp.cisco.com/pub/mibs/oid/CISCO-ENTITY-FRU-CONTROL-MIB.oid)

  cefcFRUPowerOperStatus: 1.3.6.1.4.1.9.9.117.1.1.2.1.2 for one of the

  index:

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.22 = INTEGER : 2

  We now need to find 22-year-old:

  SNMPv2-SMI::mib-2.47.1.1.1.1.7.22 = STRING : « 20 port 10GE SFP + / superviseur

  in the Module fixed-1"

  That means now the INTEGER 2 from:

  SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.22 = INTEGER : 2

  Lets look at: CISCO-ENTITY-FRU-CONTROL-MIB-V1SMI.my, section

  cefcFRUPowerOperStatus, if you are looking for in this file you will find: we (2),

  That measn this controller is actually turned on and powered.

• How to create a static ARP using SNMP?

  Hello

  I want to create a static ARP using SNMP.

  I can delete an ARP by setting oid ' 1.3.6.1.2.1.4.22.1.4' to '2'.

  But none of

  '1.3.6.1.2.1.4.22.1.1 '.

  '1.3.6.1.2.1.4.22.1.2 '.

  '1.3.6.1.2.1.4.22.1.3 '.

  '1.3.6.1.2.1.4.22.1.4 '.

  can be modified or created

  SNMP-server community is RW

  I can change the other oid, for example 'type sysName' oid 1.3.6.1.2.1.1.5.0

  I used this command to create a new ARP:

  set SNMP v2 192.168.10.1 private oid 1.3.6.1.2.1.4.22.1.1 integer 1

  the answer:

  SNMP response: reqid 16, errstat 11, erridx 1

  ipNetToMediaEntry.1 = 1

  errstat 11 is NOCREATION

  And I used the tool "Mib Browser" to set a static ARP.

  the answer is NOCREATION too.

  I searched a lot of time, a lot of people have this problem,

  someone said the oid ipNetToPhysicalPhysAddress or inetCidrRouteTable is alternative,

  but our switch do not have these oids.

  I can't find a solution.

  I want to know if the task can be performed.

  Help, please.

  Concerning

  Dear Fu

  Thank you to reach small business support community.

  I'm not positive, that this can be done on small business goes, however, what is your version of the model and the firmware of the switch so I can continue the investigation.

  I'll be looking forward to your reply.

  Kind regards

  Jeffrey Rodriguez S... : | :. : | :.
  Support Engineer Cisco client

  * Please rate the Post so other will know when an answer has been found.

• Adding accounts on ACS using SNMP

  Hi people,

  I use ACS 4.2 and I was just wondering if it is possible to add user accounts by using snmpset? If so, anyone found any documentation on what needs to be done?  I have the SNMP running on it and check with the ACS using snmpget.

  Thank you, S.

  Hi Shane,

  It is unfortunately not possible. You cannot add users via SNMP.
  However, you can add multiple users at once using RDBMS synchronization.

  HTH

  Amjad

  Sent by Cisco Support technique iPad App

• Using SNMP Configuration

  Hi im trying to configure my esx to send my OPManager Server snmp monitoring

  I have change the /etc/snmp/snmpd.conf file, and here's how it looks

  sysContact root@localhost (snmpd.conf edit)

  sysLocation room1 (edit snmpd.conf)

  secret rocommunity 192.168.10.100

  secret trapcommunity

  trapsink 192.168.10.10

  1. VMware MIB modules. To toggle the elements of VMware MIB

  1. Add/Remove the following entries.

  DLMod SNMPESX /usr/lib/vmware/snmp/libSNMPESX.so

  I opened the firewall inbound connection int the vmware infrastructure client (Server SNMP 161UDP)

  Its always failed when im trying to test the credentiel in the opmanager software

  What version of snmp use esx?     1-2-3?

  Thank you for helping

  'trapsink' is the target of trap. The host where the SNMP interruptions should be send to. You can only use the IP address or add the trapcommunity. Your syntax is correct.

  Restart the "snmpd" so he reread the snmpd.conf file: "/etc/init.d/snmpd restart."

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• How to find users VPN Live using SNMP?

  SNMP to query the device to get the VPN users who are alive?

  I need to produce a report on the trends for my management VPN user connections. If there is an OID to query, it would help me.

  I appreciate any help pointing me to appropriate doc or MIB file for my own analysis.

  See you soon

  -Spengler-

  Hey Spengler,.

  I think this is the link you are looking for:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml#mibsupportbyversion

  and, specifically, you might be interested in the following MIBS:

  http://Tools.Cisco.com/support/SNMP/do/BrowseMIB.do?local=en&mibName=Cisco-Remote-Access-Monitor-MIB

  There was a bug that has been filed for the incomplete information stored in these MIBs. The bug number is CSCso02912.

  Concerning

  ATRI.

• Use the Spotlight UC is out of control without reason

  I find more and more Mac running 10.11.4 where Spotlight is just out of control without no reason that I can discern.

  If nobody is logged on, Spotlight uses no processor.

  As soon as someone connects, Spotlight resumes the process of using CPU number one.  He is currently at 166,4% (of multiple cores).

  No matter if I disable mdutil and kill Spotlight... Spotlight returns and eats CPU.

  Reboots don't matter.

  10.11.4 reinstall combo did not help.

  Clearing the cache didn't help. / System/library and / users.

  Create a new user and login, Spotlight jumps to first place.

  Secure startup, Spotlight pops up.

  Network cable, no difference.

  First aid was clean when it is started from the recovery Partition.

  What the hell is happening here?

  Two things come to mind:

  1) restart mode without failure, then normally again

  (2) force Spotlight to reindex

• SNMP on TC software - I should use it

  Hello

  I just want to get som input on the question of the use of SNMP with systems of transport CANADA. As far as I know, management of MSDS of the systems of transport CANADA is made via HTTP/HTTPS, however the SNMP support units and it is enabled by default. My question is SNMP is used even when somehow by TMS to monitor systems. I found the following in the TMS administration guide:

  Analyze SNMP capable systems to allow a quick discovery of the inaccessibility
  This setting will allow that Cisco TMS more quickly detect if a system is in offline mode. It is recommended to enable this.

  Does this mean that TMS will notice faster a SX20 with SNMP is down that's if the SX20 has disabled SNMP? Are there any other impact on the TMS managebility if I disable SNMP?

  What is really - functionality is the same, directories, configuration changes, planning, etc., but TMS will recognize a down/offline system more quickly, so if you use the TMS to give your staff a heads-up on a problem using SNMP will give you faster notification. Other than the functionality is the same.

• SNMP help please?

  Hello

  I'm all new to SNMP, although I have used LabVIEW a few times in recent years. Office supplies for the moment, I am developing an application to test the power. We use a G756N Dell PDU for each switching power. I tried a couple of approaches to control and SNMP is the most promising so far. During my research I came across free ManageEngine MibBrowser and I could find the last MIB to download the firmware from Dell here. I was able to communicate with the UDA and points of sale under and out so far, but I really need to integrate control of the PDU in the application of LabVIEW to automate tests. I'm pinned Mark Yedinak and his APC PDU SNMP communication library, only the most recent of which I found examples in this thread.

  I tried to do a VI to test communication in LabVIEW using the OID I received from MibBrowser, but it returns an error code 2, noSuchName. The PDU is configured to use SNMP v1 and the public and private communities write access +. I tried with and without the main point, but without success. I'm using LabVIEW 2013 64-bit. Could someone please review the information below and see what I could do wrong, or that the direction to take to solve the problems there?

  Thank you

  Simon

  MIB object IDS:

  . iso.org.dod.internet.private.enterprises.dell.pdu.pdusub.hardware.rPDU.rPDUOutlet.rPDUOutletSwitched.rPDUOutletSwitchedControlTable.rPDUOutletSwitchedControlEntry.rPDUOutletSwitchedControlCmd

  . 1.3.6.1.4.1.674.10903.200.2.200.130.1.4.1.4.1: {1 or 2}

  I added le.1 at the end of the index to the first exit, and 1 variable is instantaneous, while the 2 is instant off

  Photo

  

  VI:

  Front panel:

  

  Wiring:

  

  Link to examples of SNMP Communications and APC_PDU.zip:

  http://forums.NI.com/T5/LabVIEW/APC-ups-with-desktop/m-p/2431528/highlight/true#M749059

  For some reason, I can't the real VI set. The MIB is too in the archive. Its in my selection here:

  https://DL.dropboxusercontent.com/u/10871313/power%20Supply%20Testing.zip

  Thanks again

  
  

• OID need to run SNMP queries for the CPU usage, etc. in Win XP

  Hello

  I am unable to get the details (CPU Util, Util Swap) of windows using SNMP (SNMP4j.jar) machine. The SNMP service is running on the Windows XP system target. Where can I find the correct OID for windows XP to retrieve these settings?

  Join the code below:

  Import org.snmp4j.CommunityTarget;
  Import org.snmp4j.PDU;
  Import org.snmp4j.Snmp;
  Import org.snmp4j.event.ResponseEvent;
  Import org.snmp4j.mp.SnmpConstants;
  Import org.snmp4j.smi.OID;
  Import org.snmp4j.smi.OctetString;
  Import org.snmp4j.smi.UdpAddress;
  Import org.snmp4j.smi.VariableBinding;
  Import org.snmp4j.transport.DefaultUdpTransportMapping;

  Configure the Snmp object
  private Snmp snmp = null;
  private UdpAddress targetAddress = null;
  private CommunityTarget target = null;
  ResponseEvent responseEvent = null;

  targetAddress = new UdpAddress (10.101.210.127 + ' /' + 161);

  target = new CommunityTarget();
  target.setCommunity (new OctetString ("public"));
  target.setAddress (targetAddress);
  target.setRetries (2);
  target.setTimeout (60000);
  target.setVersion (SnmpConstants.version2c);
         
  SNMP = Snmp new (new DefaultUdpTransportMapping());
              
         
  SNMP. Listen();

  CPU usage code
     
  Command PDU = new PDU();
  command.setType (PDU. (GET);
  Command.Add (new VariableBinding (new OID(".1.3.6.1.2.1.25.2.3.1.4"))); / / percentage of CPU Idle time//.1.3.6.1.4.1.311.1.7.3.1.6.0
  try {}
  responseEvent = snmp.send (command, target);//.1.3.6.1.4.1.2021.11.11.0
  } catch (Exception e) {}
  System.out.println ("Exception:" + e); e.printStackTrace ();
  }
  If (responseEvent.getResponse () == null) {}
  request timed out
  Returns a null value.
  } else {}
  Response PDU dump
  PDU pdu = (responseEvent.getResponse ());
  Output vector = new Vector();
  Output = pdu.getVariableBindings ();
  int val1 = 0;
  Double CPUMemUtil = 0;
  Dim str As String = null;
  Str = Output.get (0) m:System.NET.SocketAddress.ToString ();
  String [] Spstr = str.split("=");
  Spstr [1] = Spstr [1] .trim ();
  try {}
  val1 = Integer.parseInt(Spstr[1]);
  } catch (Exception e) {}
  System.out.println ("An Exception occurred" + e); e.printStackTrace ();
  }
  CPUMemUtil = (100 - val1);
  String OutputMemUtil = Double.toString (CPUMemUtil);
  System.out.println ("CPU usage" + OutputMemUtil);

  Thanks in advance,

  Souto

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• SNMP v3

  Hi guys

  HDS does support SNMP v3? In our network, only SNMP v3 is allowed.

  Cheers, Dani

  In my view, that HDS is currently using SNMP v2C. Which has been added in point 6.3 of the OCP. I see nothing in news or notes version 6.5 documents I have about adding v3 6.4.

• PowerConnect 2824 - SNMP monitoring

  Hello

  I want to monitor the State of a switch Dell PowerConnect 2824 using SNMP. I have trouble finding the proper MIBS.

  Edit: I managed to access the switch through the web interface and am SNMP receives traps as expected.

  2) whose identifiers are available for monitoring: power, temperature, load, connections, faults, etc.? Where can I find the MIB files? Or documentation explaining the use of more detailed?

  Advice or documentation links are appreciated.

  Thank you.

  The MIB file is included in the download for the firmware.

  www.Dell.com/.../drivers

• List of SNMP OID of the PowerConnect switches

  Hello

  I was wondering if anyone could can give advice on this survey, like all my research and investigations have not until this product no result.

  I conclude on a significant deployment for a customer who has a mixture of 80xx PowerConnect 62xx, 55xx and M8024K blade, M6348 switches. All switches are deployed and operational, and we are now trying to set the SCOM server to use SNMP to retrieve events etc. of the switches.

  the problem is that I couldn't find SNMP OID anywhere to concerned, switches that are required. the events that we want to keep an eye on relate to connect the downs, lag switch, battery, authentication and critical failures for the models.

  There is no requirement for the consumption of its use, of temperature, fan or CPU power or memory, so they are not needed.

  Are there SCOM management packs that might help out here?

  Any advice or pointers will be greatly appreciated.

  Cheers.

  Richter,

  Looks like you just need to install traps to send alerts to your SCOM server.  Normally, to see the things that you listed as changes to links, lag, batteries, authentication failures and other critical changes of your switches, it is not necessary ask an OID.  All the these can be controlled automatically traps.  The processor, memory, temp, fan and power you listed are in a different category, because they are all sensors in the switch that can send a trap when a threshold is reached, but can also be queried for exact measurements.  Traps are easier to use than to the vote an OID and let you keep an eye on the areas that you mentioned.  To install traps, set your community on your switches string and the management server, enable all traps and configure your management as your recipient of the host server.  The commands are:

  (config) #snmp - known private community server

  (config) #snmp - server enable traps all

  (config) #snmp - private host 10.10.10.5 Server

  I hope it's useful for you.

  B

• [Problem] SNMP on the Dell Server

  Hi all

  I am currently managing a lot of Dell servers: M620 R720, M610, R610, r.620... I use SNMP to collect information from my servers. I have some problems with SNMP:

  I have setuped a collector (CentOS) server and the MIB file complete (10892, sotragemanagement, SMIv2-iDRAC, iDRAC-SMIv1...), using snmpwalk to collect information of agent (CentOS). On the agent server, I already have setuped OMSA agent, full mibs (10892, sotragemanagement, SMIv2-iDRAC, iDRAC-SMIv1...) and all the services work properly:

  status of /etc/init.d/dataeng # [root@agent MIB]
  dsm_sa_datamgrd (43827 43770 pid) is running
  dsm_sa_eventmgrd (pid 43879) is running
  dsm_sa_snmpd (pid 43938) is running

  * From collector server, I used the command:

  [root@collector~]# snmpwalk-v2c IP - c Mi725005d1 1.3.6.1.4.1.674.10892.1

  MIB-Dell - 10892:mIBMajorVersionNumber.0 = INTEGER: 7
  MIB-Dell - 10892:mIBMinorVersionNumber.0 = INTEGER: 3
  MIB-Dell - 10892:mIBMaintenanceVersionNumber.0 = INTEGER: 0
  MIB-Dell - 10892:systemManagementSoftwareName.0 = STRING: "administrator of the server.
  MIB-Dell - 10892:systemManagementSoftwareVersionNumberName.0 = STRING: "7.3.0.
  MIB-Dell - 10892:systemManagementSoftwareBuildNumber.0 = INTEGER: 1

  ........

  -> OK for 10892 mib

  * It's OK with 10893 mib (storage management).

  * But when I used ooid to iDRAC-SMIv2 mib, iDRAC-SMIv1 mib, it wasn't OK

  [root@collector ~] # snmpwalk m all - v2c IP - c Mi725005d1 1.3.6.1.4.1.674.10892.5
  IDRAC-MIB - SMIv2:outOfBandGroup = No. Such Object available on the agent to this OID
  [root@collector ~] # snmpwalk m all - v2c IP - c Mi725005d1 1.3.6.1.4.1.674.10892.4
  IDRAC-MIB - SMIv2:server3.4 = No. Such Object available on the agent to this OID

  Can someone help me with this problems?

  Thank you very much

  Nampnx

  Hello Nampnx

  Are all the other OID of work or their absence from the out-of-band DIO works?

  10892.5 does not have an OID assigned to him. It's just a group, the message cannot find an OID so that it is normal. I also do not show 10892.4 as valid an OID.

  Do you have a valid return with:

  Group Information RAC
  Group of RAC Information objects provide information on iDRAC.

  Table 2023.

  Name of the CAR

  Name racName

  ID of the 1.3.6.1.4.1.674.10892.5.1.1.1.0 object

  Description this attribute sets the name of the product of a remote access card. The StringType read only access syntax

  Or this:

  Table of 1973.

  Message ID

  AlertMsgID of variable name

  ID of the 1.3.6.1.4.1.674.10892.4.5000.10.7 object

  Description Specifies the message ID improved for the object generating the alert. Syntax DisplayString

  http://FTP.Dell.com/manuals/all-products/esuprt_software/esuprt_ent_sys_mgmt/esuprt_ent_sys_mgmt_opnmng_svr_admin/Dell-opnmang-Srvr-Admin-v7.4_Reference%20Guide3_en-us.PDF

  Thank you