Spyware in the system on the new Volume

Similar Questions

• Can't add titles to the new volumes. And Volume c.

  I have just installed 2 new readers of my ReadyNas nv + v2, the device is running RAID 0, when I try to add a share nothing happens when I hit the buttun apply!

  I appreciate any assistance.

  Thank you

  n

  For some unkoown reason, it started working. Don't know why, but I appreciate the comments of everyone!

• HP MSA2324i, new volume / LUN added, cannot be seen by the host ESX 4.1 (fine old LUN work)

  Hello

  I have a vSphere Essentials Plus 4.1 cluster that is connected to 2 x bays HP MSA2324i SAN, we have 2 x hosts and both can see current volumes / LUNS absolutely perfect (vMotion and migration of VM offline all work as expected). I'm starting a consolidation project virtual disks / volume of the San 2 x, however a new volume I created on a network SAN cannot be seen by the other host.

  The new volume has been implemented exactly like the others, but of course with a unique logic for mapping unit number explicit, but when scanning the iSCSI HBA the new LUN is never found :-(

  I was wondering if others have had also this happens to them and know why this may be implemented?.

  (This is a company that I joined, it's my third week, and that they had also no VMware subscription on their reunification since 2012, otherwise I would be to connect a call to technical support of VMware, by train to get the sub upwards and running)

  OK I think that might be the cause, I came across this recently maximum LUN ID is 255, change the logic unit to a number smaller than 255 ID number and try again, let us know how you go!

  vM

  -----------------------

  VCAP-DCD / VCAP-DCA / VCP-CLOUD / VCP - DT / VCP5 / VCP4

  -----------------------

  vMustard.com

• How to transfer Time Machine backup to the new external hard drive

  I'm upgrading to a 1 hard external to the Western reader to with 5 TB of Seagate.  This is because Time Machine has used the 1 TB drive.  How can I transfer the files from backup Time Machine from the old to the new drive so that backups continue to have access to the old files.

  Although the documentation Apple says you can copy Time Machine backups in the Finder, it is very slow and sometimes does not.

  This technique works only if the volume that you copy to the same size or larger that that you are copying to.

  First of all, please open the Time Machine preference pane and click the Select Disk... button. You may be able to unlock the settings first, by clicking on the padlock icon in the lower left corner of the window. Log in as administrator.

  Remove the volume you want to copy in the list of backup destinations. Then turn off Time Machine.

  Launch disk utility, open the built-in Help and search for the term 'Double '. Follow the instructions. All existing data on the destination volume will be deleted. That shouldn't be a problem, because you do not want to mix non-sauvegarde and backup data on the same drive anyway.

  If the volume you are copying has been encrypted by Time Machine, you must first unlock it. Click the release button in the toolbar of the disk utility window.

  Turn Time Machine back on and select the new volume as a backup destination. Alternatively, you can continue to use the old volume, if you wish. Both will be alternated when both are available.

  ATTENTION: If you copy the volume is corrupted, as shown by the ERD or first aid in disk utility, while corruption is copied to the new drive. Do not copy data from a damaged on a faulty disk volume. Put aside the reader and do not use until you don't know that you no longer need the data. Then securely erase it and bring it to a recycling center. Do the same if the restore operation fails with "disk errors."

• When I try to create a new volume on my hard drive I get access denied

  I have Vista Home Premium update to the standards in force. I have problems reading windows XP files and compact optical discs. A solution, which I got from Microsoft was to partition the C drive and the new volume in Windows XP and run the software it. I followed the instructions of management of disk, but when I do the search for space fell, it tells me access is denied. Even though I know I have more than half of my drive C is empty.

  Hi doqmarr,

  ·         How did you create free space on the hard drive (hdd)?

  I suggest you to take possession of the volume, and check if it works very well. Follow these steps:

  1. click on the drive and then click Properties.

  2. click on the Security tab.

  3. under group or user names, click your name to see the permissions you have.

  Reference: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions

• Won't start not satellite M300 - system on the disk volume is damaged

  OK on the 1st...
  Today, I turn on my laptop but it just will not start until... stop just at the TOSHIBA LEADING INNOVATION he...
  and the drive light lit upwards or blink.

  After that I tried the several times, it starts.
  When I went into windows, IE opened, it hangs again.
  After a while a black screen with a mouse crusor only...

  I tried to turn it back on it... it comes out the window repair.
  after repair, he says that:
  "the system on the disk volume is damaged."
  'system QuickIN' file is repair.
  but always after some time, the problem came again...

  So I wonder what problem is that and what can I do to solve this problem?
  Is a software or hardware problem?

  Hello

  For me, this looks a bit like a HARD drive problem.
  I guess that HARD drive developed and the hardware error.

  Have you checked if the HARD drive is listed and recognized in the BIOS?
  Do this!

  If the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and must be replaced.

  Even if the HARD drive would be listed in the BIOS, you test another new HARD drive to check if the problem is not related to the failure of HARD drive.

• Console of r. used to fix the MBR, now dirve says "New Volume"

  OK, I'm having a big problem.

  I'll start by saying that my computer a few days ago has only been running a configuration to multibooting with linux on a disk and Windows XP on another. Linux using Grub to boot. Now, I recently updated my BIOS and this had caused a problem with GRUB not start XP properly. I decided to remove the Linux disk, simply launch XP as my main drive and physically switch the two when I need to use one or the other.

  Given that I was removing Linux, I had to fix the MBR for Windows would be to start properly. I read online that all I had to do was start using my XP installation disk in the recovery console and doing a FIXMBR and FIXBOOT. I did it, but something went wrong and he said that I had to do a CHKDSK first. So I made "CHKDSK/r" and let stand overnight (this disc is 1. 5 t so it took a while).  So the next day after work I went back to finish the FIXMBR and FIXBOOT. He gave me the same message. Now I know exactly what I did after that, if I tried other commands or what, but I finally decided to just hang up and see what was going on.

  In Linux, I see that the name of volume for my XP disc went from "XP 1. 5 t"to"new Volume ". Not good. Now I see there are two files listed: RECYCLER and System Volume Information. I guess that the disk has been reformatted somehow? Now I'm at the point where I use my XP Backup to another drive of four months ago. I did some research on the recovery partition, file recovery, etc. I came across a program (trial version) that finds deleted files. I installed and run for a few minutes. OK, good news, is that I do not see some of my files and folders, so I guess that the disk was not completely formatted/overwritten.

  I don't know how the player got there where she is now. Maybe I used a bad command or a switch?

  So my question is where to go from here? Should I get a new drive and recover the files on the new disk? Can I restore files and recover the old partition?

  I hope I didn't confuse you too much. I appreciate any help you can give.

  -Jimmy

  Hey Jimmy,

  I personally never heard a user successfully remove the GRUB bootloader without a reinstall of Windows. You have no real solution is to reinstall Windows from the Windows partition is completely empty. I don't know any Linux file recovery tools, you may need to post in a Linux forum for Linux file recovery tools.

  Sorry I don't have a better solution for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drive on which Windows XP to reside is always labeled as a system drive. How can I make one of the other disks that has Vista or 7 that the new system?

  Change the system drive

  I'll try to explain my situation better than I can.

  My situation is that when I used to have XP installed, I had installed the only drive I had back then which is now the drive D, for a long time, so I have Windows Vista Home Premium 32-bit, Windows 7 Home Premium 32 bit installed on two different discs, Vista is installed on drive C and 7 is installed on drive E , but I don't have XP that I had managed to get rid of it.

  My problem is that the drive on which Windows XP to reside has always left this disc marked as system in the disk management window, and I was wondering how to do that one of the other readers who has Vista or 7 that the new system?

  I already managed to change the startup disk from drive where Vista is installed to, it's just that I need to change the disk that is marked as system to another drive, such as D drive begins to show signs that it comes at the end of his life and I would like to move the startup folder as well as the other files needed to start on the other.

  I assume that you installed Windows XP 1, then Vista, 7 (these 2 OS not in order)?

  And Vista and 7 was by all means upgrade installation?

  Since originally, that you have installed Windows XP on drive D, it should be marked as 'system' and retains so the tag 'system '.

  The volume of the 'system' should be identified as the first primary partition active. It may or may not have the files it contains.

  The fact that the system considers "system drive" does not mean that there are files that it contains.

  Now, you want to delete the existing volume and create a new volume. Needs to be done outside the facility.
  When you start the cd or DVD to start the installation list us readers, if you remove the volume the volume drive letter is already booked, so you get the next available drive letter, do not re-use the deleted volume drive letter.

  If he removed during installation and then recreated as a new volume (formatting does not remove the volume, you need to delete the volume and recreate it)

  -[Posted by Darrell Gorter [MSFT] in another forum.]

  Try to format the XP partition and change the drive letter.

• RESOLVED: External Volume RAID 5 TPG "split into two" once connected to the new Windows 7 64 bit install

  I have an AMS Venus T5J external drive enclosure (DS-2350J); It is filled with disks Western Digital 1 terabyte Caviar Green 5, model WD10EADS.  The device of Venus using a control panel with a JMicron JMB393 chipset, which is able to create RAID volumes to a connected host system transparently.  I used it to create a volume of 4 terabyte RAID 5 covering all five disks.  I've been accessing using a laptop Toshiba P105-S9337 with a card PCMCIA Vantec eSATA interface, which worked, but was not very effective.  Of course, it was necessary to structure the volume as TPG due to its size.  That has been a challenge.

  My primary system was Windows XP 32-bit installed, which does not support GPT disks.  I experimented with Ubuntu and another distribution of Linux, which supports the GPT, but ran into problems to mount the RAID 5 volume transparently (it may have partially been my inexperience, but it * should * have been easier).

  So I decided I have to install Windows 7 on this system, so that I could get access to this RAID her volume.  The system is based on an Asus M2N SLI Deluxe motherboard, which has an eSATA port integrated driven by a JMicron JMB363 chipset (NOT capable port multiplier).

  Windows 7 installation, installation of the JMicron driver for the motherboard and log box RAID, Windows little wanted to assign the 'disc' a new disk ID in order to to use.  I met regularly this process in the past without problems, when the new disks are presented on a Windows system, so I thought that anything that allows him to do.  However, has as expected making accessible existing volume.  After investigation, I discovered that Disk Manager believes that there is a space UNALLOCATED 1.67 TB and nothing more!

  At this point, I was naturally anxious, because I had data on the volume.  I checked the volume by connecting it to the laptop Windows 7 (32-bit) with whom he had previously worked and found a slightly different and more revealing image in disk management: there were TWO regions illustrated for the disk, an exactly 2 TB and the other TB to a 1.67, this last occupant clearly space greater than 2 TB.  These two regions, yet once, were listed as unallocated.  In both systems, Windows 7 was also clearly assumed the volume she TPMS, since the two I saw the option convert to GPT... which is already!

  That's happened?  Simply allowing Windows write a disc ID to this volume somehow corrupt?  How can I recover the previous volume of 3.67 unique TB who was present?  Should I just order in disk management to convert it to a GPT disk?  Is a non-destructive operation?

  I solved this problem with a perfect result...

  In short, I could use TestDisk to recover completely with all data intact original partition table.  It took several tries, several hours waiting for the paint to peel (scanning) and finally a brief dialogue with the proponent (Christophe Grenier).

• Add the new Equallogic system

  Hello

  We use 2 PS4000 systems in a group.  Now, we wanted to add additional capacity to the group, and it seems that we must add a PS6100 model, because the PS4xxx series can have 2 systems per group.

  What is the best way to develop our Equallogic system? PS4xxx systems can be added to a group of PS6100 lossless or start over?  Or does first to transfer all data in the system of PS6100 and reset and add the PS4xxx later?

  good documentation on this subject?

  Thanks in advance

  Tom

  Yes, you can add the additional PS6100, which will remove the limits of PS4000 configuration.

  You can add it as its own swimming pool and then move the volumes on the new Member, or put it in the same pool as the PS4000.

  First pass of the PS4000 at least 5.2.5 before adding in the PS6100.   Then proceed to PS6100 to make.  I think he's not coming with 5.2.5 installed.

  If you let me know what is the size / speed / RAID type of the PS4000 and what size/TPM in the PS6100 I can offer you some general tips.

  The Administrator's guide has information about the management of members and pools, there is also a report of tech Storage Tiering

  en.Community.Dell.com/.../19974554.aspx

  Kind regards

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

  I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

  It is impossible to tell from this information. Choose about this Mac from the Apple menu, click more information and search the model identifier.

  If it's MacBook1, 1, 10.6.8.

  If it is MacBook2, 1-MacBook4, 1, 10.7.5.

  If it's MacBook5, 1 or MacBook5, 2, 10.11.6.

  If it's MacBook6, 1 or greater, 10.12.

  (144865)

• had to install the new operating system and bookmarks are gone

  Hiya. I had problems with the computer and the fix was to install a new operating system (windows 7 it was old, windows 8 is the new). Most of my old files make the switch, but when I downloaded firefox, my favorites have disappeared. I looked in my profile in the menu, but it's the profile that I created today by downloading firefox. Where can I find my old profile? Any help is greatly appreciated! Thank you, Billy

  Was this an upgrade of type "on the spot" where your user folder

  C:\Users\youroldusername\
  

  was intact, or did you end up with a new user folder? In the case of a new user folder, you will find a folder named

  C:\Windows.old\Users\youroldusername\
  

  If so, your Firefox data are probably here - and here's how I suggest to access:

  First of all, it would be useful to set windows to display the hidden files and folders. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hidden-files

  Then click in:

  Username\AppData\Roaming\Mozilla\Firefox\Profiles C:\Windows.old\Users\

  Note: there is a cache under AppData\Local folder, but everything important is under AppData\Roaming.

  Here you can find one or several folders named random semi. Who has most recently updated content is probably one you want to restore.

  This post has my suggested procedure to resurrect these data in your new installation of Firefox. Please note the use of the copy instead of move throughout the process. This allows you to try again if it fails somewhere along the way.

  https://support.Mozilla.org/questions/1024189#answer-638319

  A little luck?

  Note that if you really ONLY want to bookmark, copy the last two backups of the old bookmarkbackups folder to a location such as the desktop, see the following article (you will use 'Choose file' in the menu to access these backups): restoring bookmarks from a backup or move them to another computer. Note that this process will replace all new bookmarks that you may have saved since installing Firefox again. If you need to preserve those, first use the export feature: Export Firefox bookmarks to an HTML file for backup or transfer bookmarks.

• Anyone with the problem of not show apple tv on the same wifi to connect the new application remote control (with the last operating system both on device)?

  Tried to connect the new (launched in July 2016) Apple Remote app, I'm not able to add the Apple Tv from my iphone (5 c), because it does not show apple tv to connect even on the same wifi. I use the latest os on iphone and TVos 9.3.3.

  9.3.3 isn't the latest version of the software for your phone or your Apple TV.

  Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > system > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)

• Where is the volume control on the new Apple TV app?

  Where control of the volume on the new Apple TV app?

  iOS devices isn't the IR transmitter to control the TV volume. Use own TV remote control or any universal remote you have.

  TT2