SQL * connect more does not work as I want.

Similar Questions

• Canvio connect II does not work on Mac

  I have a canvio connect II and I had to format it because Windows 7 does not recognize, I did said Toshiba, for formatting so that the hard disk has unit. I formatted with NTFS and my problem is when I connect my Mac hard drive, I can't save anything, I can't make a backup... Then my canvio connect II does not work in my Mac.
  How can I put all the software that had my hard drive? Where can I download them? How to install?

  Thank you!
  Alberto.

  I saw in the toshiba tutorial this hard drive driver "Tuxera NTFS for Mac" it allows to read and write data in Mac and Windows, how can I get this driver?

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• iPhone 6s and carplay connected but does not work

  It has worked before and now does not. I deleted the system carplay phone and indicated above. The iPhone says bluetooth is connected to carplay and carplay indicates it is connected to the iPhone, but it does not work properly. I can't get or receive calls. I hear the phone ring on incoming calls by speakers in the system several times and when I touch the phone button my steering wheel to answer does not work, or it shows the phone number entering on the radio screen. When I try to make a call, the iPhone does not, I call say they have heard their phones ring but could not hear me speak, phones sounds dead on both ends. I have to disconnect carplay to make and receive calls.

  As side note my iPhone and carplay work with audio for listening to music, but who also has been removed from carplay so that I can put in place the phone carplay only system.

  Any suggestion would be appreciated.

  Concerning

  Steve

  Nevermind, I figured it. I completely turned off the iPhone and he turned his back, and then just followed the car game voice instructions to synchronize.

• Config Free - Connectivity Doctor does not work correctly

  Hi all

  yesterday, I've updated the driver for my WIFI, with the driver found on the Toshiba support page. After installation, the Config Free utility does not work correctly. Indeed, the diagnosis of the doctor of connectivity us window briefly, just to replace it with the classic error message: cfmain.exe has encountered a problem and needs to close...

  The details are
  AppName: cfmain.exe AppVer: 5.0.0.119 ModName: venapi.dll
  ModVer: 5.0.0.3 Offset: 000034df

  Thank you very much for your support

  I found this:
  cfmain.exe - this is a component of the Toshiba network device. Network device Toshiba is Toshiba network device selector. For starters, this application requires a common Module of Toshiba ACPI and hotkey wireless.

  Well, because of this description that I recommend you to reinstall the common modules and wireless keyboard shortcut utility

• My wired connection TV does not work.

  I have a Sony Bravia 46 EX720. I tried today to get on netflix, but it says my wired connection failure. I use a router that works properly. When I went to connect to another device, it works fine. However, my TV is not able to use the connection.

  Hi there my name is jeff.i'm having the same problem too .i linked the refresh of internet content but his does not work cos my tv will not let me connect to my internet.

• My Windows Installer does not work and I want to reinstall Windows. How can I do this?

  original title: Windows install

  My windows installer does not work. How can I reinstall my operating system?

  You will need to change the startup disk in the BIOS for the cd. Then boot from it. If you are installing windows from windows

• Connection pool does not work.

  Nice day. all the
  
  I tried OracleConnectionPoolDataSource and OracleDataSource.
  
  And found that there is no difference in performance. And connections are not grouped according to me.
  
  My sample fill the table with the records and read and update simultaneously in two threads.
  
  Below is a code provided.
  
  < strong >
  
  A piece of < facilities > logs: each time new connection is created.
  
  ...
  
  connection = oracle.jdbc.driver.OracleConnection@1198891
  
  0 updatedNumber = 1
  
  Connection.Close = oracle.jdbc.driver.OracleConnection@1198891
  
  connection = oracle.jdbc.driver.OracleConnection@17725c4
  
  Connection.Close = oracle.jdbc.driver.OracleConnection@17725c4
  
  List.Size () = 10
  
  0, name_update0, name_desc0, name_status0, 2008-11-04, 2008-11-04.
  
  1, a1, c1, b1, 2008-11-04, 2008-11-04.
  
  ...
  
  view the logs files I see that every time new connection is created in both cases, if I use OracleConnectionPoolDataSource or OracleDataSource.
  
  < strong >
  
  Question: < facilities > can someone help me understand how to use the connection pool? And how to see with my own eyes that this works?
  
  DDL < strong > < facilities >:
  
  to run the program, we should create table:
  
  {color: #000080} CREATE TABLE TEST_RECORD1)
  
  ID NUMBER (10) NOT NULL PRIMARY KEY,
  
  NAME VARCHAR2 (255 BYTE),
  
  VARCHAR2 (255 BYTE) STATUS,
  
  DESCRIPTION VARCHAR2 (255 BYTE),
  
  START_DATE TIMESTAMP,
  
  END_DATE TIMESTAMP
  
  ); {color}
  
  < strong >
  
  < Facilities > Java code:
  
  package test.jdbc;
  
  import java.sql.Connection;
  
  import java.sql.PreparedStatement;
  
  import java.sql.ResultSet;
  
  import java.sql.ResultSetMetaData;
  
  import java.sql.SQLException;
  
  import java.sql.Statement;
  
  import java.util.ArrayList;
  
  import java.util.Date;
  
  import java.util.List;
  
  javax.sql.ConnectionPoolDataSource import;
  
  import javax.sql.DataSource;
  
  Import oracle.jdbc.pool.OracleConnectionPoolDataSource;
  
  Import oracle.jdbc.pool.OracleDataSource;
  
  public class TestConnectionPooling2 {}
  
  static data source data source;
  
  / * number of iterations * /.
  
  public static final long BASE_REPEAT_NUMBER = 5;
  
  public static final long RECORDS_NUMBER = 10;
  
  Public Shared Sub main (String [] args) throws Exception {}
  
  Here you can change the data source (shared or not), but the performance has won "t change
  
  setupDataSource (new OracleDataSource());
  
  setupDataSource (new OracleConnectionPoolDataSource());
  
  long startTime = System.currentTimeMillis ();
  
  own picture
  
  removeAllRecords ("the removal of test_record1");
  
  insert records into the table
  
  for (int i = 0; i & lt; RECORDS_NUMBER; i++) {
  
  insertRecord (i,
  
  «insert into TEST_RECORD1 (id, name, status, description, start_date, end_date) "»
  
  + " values (?, ?, ?, ?, ?, ?)");
  
  }
  
  wire installation that queries the data in table
  
  Wire th1 = new Thread ("thread 1") {}
  
  public void run() {}
  
  for (int i = 0; i & lt; BASE_REPEAT_NUMBER; i++) {
  
  retrieveRecords ("select * from test_record1 by id asc");
  
  Thread.Yield ();
  
  }
  
  }
  
  };
  
  wire installation that updates the data in table
  
  Th2 thread = new Thread ("thread 2") {}
  
  public void run() {}
  
  for (int counter = 0; counter & lt; BASE_REPEAT_NUMBER; counter ++) {}
  
  for (int i = 0; i & lt; RECORDS_NUMBER; i++) {
  
  performSingleUpdate (counter, i,
  
  "update TEST_RECORD1 set name =?, description =?, status =? where id =? ») ;
  
  Thread.Yield ();
  
  }
  
  }
  
  }
  
  };
  
  TH1.start ();
  
  Th2.start ();
  
  do not complete until the worker threads
  
  While (th1.isAlive (): th2.isAlive ()) {}
  
  Thread.Yield ();
  
  }
  
  long endTime = System.currentTimeMillis ();
  
  System.out.println ("execution time:" + (endTime - startTime) + "ms.");
  
  }
  
  private static Sub performSingleUpdate (long bar, long I, String sql) {}
  
  PreparedStatement stmt = null;
  
  Connection conn2 = getConnection().
  
  try {}
  
  stmt = conn2.prepareStatement (sql);
  
  long temp = counter * 10 + i;
  
  stmt.setString (1, "name_update" + temp);
  
  stmt.setString (2, "name_desc" + temp);
  
  stmt.setString (3, "name_status" + temp);
  
  stmt.setLong (4, i);
  
  int updatedNumber = stmt.executeUpdate ();
  
  System.out.println (counter + ".") updatedNumber = "+ updatedNumber);
  
  } catch (SQLException e) {}
  
  e.printStackTrace ();
  
  } {Finally
  
  try {}
  
  stmt. Close();
  
  } catch (SQLException e) {}
  
  e.printStackTrace ();
  
  }
  
  If (conn2! = null) {}
  
  closeConnection (conn2);
  
  }
  
  }
  
  }
  
  private public static void removeAllRecords (String deleteAllSQL) {}
  
  Statement stmt = null;
  
  Connection conn2 = getConnection().
  
  try {}
  
  stmt = conn2.createStatement ();
  
  int updatedNumber = stmt.executeUpdate (deleteAllSQL);
  
  System.out.println ("remove all records. updatedNumber = "+ updatedNumber);
  
  stmt. Close();
  
  } catch (SQLException e) {}
  
  e.printStackTrace ();
  
  } {Finally
  
  If (conn2! = null) {}
  
  closeConnection (conn2);
  
  }
  
  }
  
  }
  
  {} public static void retrieveRecords (String sql)
  
  List = new ArrayList();
  
  Statement stmt = null;
  
  ResultSet resultset = null;
  
  int recordsCounter = 0;
  
  Output connection getConnection() =;
  
  try {}
  
  stmt = connection.createStatement ();
  
  ResultSet = stmt.executeQuery (sql);
  
  While (resultset.next ()) {}
  
  Record NewRecord = new Record();
  
  recordsCounter ++;
  
  newRecord.setId (resultset.getLong ("id"));
  
  newRecord.setName (resultset.getString ('name'));
  
  newRecord.setDesc (resultset.getString ("description"));
  
  newRecord.setStatus (resultset.getString ("status"));
  
  newRecord.setStartDate (resultset.getDate ("start_Date"));
  
  newRecord.setEndDate (resultset.getDate ("end_Date"));
  
  List.Add (NewRecord);
  
  }
  
  } catch (SQLException e) {}
  
  e.printStackTrace ();
  
  } {Finally
  
  If (resultset! = null)
  
  try {}
  
  ResultSet.Close ();
  
  } catch (Exception e) {}
  
  e.printStackTrace ();
  
  }
  
  If (stmt! = null)
  
  try {}
  
  stmt. Close();
  
  } catch (Exception e) {}
  
  e.printStackTrace ();
  
  }
  
  If (connection! = null) {}
  
  closeConnection (connection);
  
  }
  
  }
  
  StringBuilder sb2 is new StringBuilder ("list.size () =" + list.size () + "\n");.
  
  for (int i = 0; i & lt; list.size (); i ++) {}
  
  Record (Record) = list.get (i);
  
  SB2. Append ("" + record.toString () + "\n");
  
  }
  
  System.out.println ("" + sb2);
  
  }
  
  {} public static void insertRecord (long counter, String sql)
  
  PreparedStatement stmt = null;
  
  Connection conn2 = getConnection().
  
  try {}
  
  stmt = conn2.prepareStatement (sql);
  
  stmt.setLong (1 wicket);
  
  stmt.setString (2, "a" + counter);
  
  stmt.setString (3, "b" + counter);
  
  stmt.setString (4 "c" + counter);
  
  stmt.setTimestamp (5, java.sql.Timestamp (System.currentTimeMillis ())) of new;
  
  stmt.setTimestamp (6, java.sql.Timestamp (System.currentTimeMillis ())) new;
  
  int updatedNumber = stmt.executeUpdate ();
  
  System.out.println (".insertNumber =" + counter + updatedNumber);
  
  } catch (SQLException e) {}
  
  e.printStackTrace ();
  
  } {Finally
  
  try {}
  
  stmt. Close();
  
  } catch (SQLException e) {}
  
  e.printStackTrace ();
  
  }
  
  If (conn2! = null) {}
  
  closeConnection (conn2);
  
  }
  
  }
  
  }
  
  Initial methods
  
  private static Sub setupDataSource(OracleDataSource oracleDataSource) throws SQLException {}
  
  OracleDataSource ds = oracleDataSource;
  
  ds.setUser ("akhlystov");
  
  ds.setPassword ("xallex");
  
  ds.setURL ("jdbc:oracle:thin:@localhost:1521:abc");
  
  dataSource = ds;
  
  }
  
  public static {DataSource getDataSource()
  
  Returns the data source;
  
  }
  
  private public static void closeConnection (connection) {}
  
  If (conn! = null) {}
  
  return;
  
  }
  
  System.out.println ("Connection.Close () =" + login + "\n");
  
  try {}
  
  Connection.Close;
  
  } catch (SQLException e) {}
  
  throw new RuntimeException)
  
  "application should not run when the database cannot close the connection");
  
  }
  
  }
  
  static connection Conn;
  
  public static {connection getConnection()
  
  /*
  
  * Uncomment to test without any source of data, unique connection if (conn is
  
  * null) {try {conn = getDataSource () .getConnection () ;} catch}}
  
  * (SQLException e) {e.printStackTrace () ;}} return conn;
  
  */
  
  try {}
  
  Fitting out = null;
  
  If (instanceof ConnectionPoolDataSource getDataSource()) {}
  
  connection = ((ConnectionPoolDataSource) getDataSource ()) .getPooledConnection () .getConnection ();
  
  } else {}
  
  connection = getDataSource () .getConnection ();
  
  }
  
  System.out.println ("connection =" + connection);
  
  return of connection;
  
  } catch (SQLException e) {}
  
  e.printStackTrace ();
  
  throw new RuntimeException ("application should not run when the database is not available");
  
  }
  
  }
  
  Record class
  
  public static class {Record
  
  long ID;
  
  The name of the string;
  
  String desc;
  
  Status string;
  
  Date startDate;
  
  Date endDate;
  
  {} public long getId()
  
  return the id;
  
  }
  
  public void setId (long id) {}
  
  This.ID = id;
  
  }
  
  public String getName() {}
  
  return the name.
  
  }
  
  public void setName (String name) {}
  
  myIdName = name;
  
  }
  
  public String getDesc() {}
  
  return of ESCR;
  
  }
  
  {} public void setDesc (String desc)
  
  This.DESC = desc;
  
  }
  
  public String getStatus() {}
  
  return the situation;
  
  }
  
  {} public void setStatus (string status)
  
  This.Status = status;
  
  }
  
  public Date getStartDate() {}
  
  return startDate;
  
  }
  
  {} public void setStartDate (Date startDate)
  
  this.startDate = startDate;
  
  }
  
  public Date getEndDate() {}
  
  return endDate;
  
  }
  
  {} public void setEndDate (Date endDate)
  
  this.endDate = endDate;
  
  }
  
  public String toString() {}
  
  return the id + ',' + name + ',' + desc + ',' + status + ',' startDate + ', ' + endDate + ".";
  
  }
  
  }
  
  }
  
  Published by: Alexandr Khlystov on 04.11.2008 14:20

  Relevant documentation for JDBC 9i drivers here is http://download.oracle.com/docs/cd/B10501_01/java.920/a96654/connpoca.htm#1056354.

  In the world of JDBC 9i driver, there was a distinction between a connection pool (consolidated connection) and a cache of connections.

  A connection pool is trying to eliminate overhead consumption and resources of connection / disconnection from the database. If the connection is going to be only reused so no reason to close the connection, just open it again.

  What a performance gain were you looking for? Only, you would see a performance gain if your application was constantly opening and closing of connections, demanding that all resources for Setup and take down communications database. When the connection is established there is no difference in the performance of the execution of SQL.

  You can see with

  import java.sql.Connection;
  import java.sql.ResultSet;
  import java.sql.SQLException;
  
  import oracle.jdbc.pool.OracleConnectionPoolDataSource;
  import oracle.jdbc.pool.OracleDataSource;
  import oracle.jdbc.pool.OraclePooledConnection;
  
  public class TestConnectionCache {
  
    public static void exec(Connection conn) throws SQLException {
      ResultSet rs = conn.prepareStatement("select sys_context('USERENV','SESSIONID') from dual").executeQuery();
      rs.next();
      System.out.println("Session id: " + rs.getInt(1));
      conn.close();
    }
  
    public static void main(String[] args) throws SQLException {
  
      OracleDataSource ods = new OracleConnectionPoolDataSource();
      ods.setUser("...");
      ods.setPassword("...");
  
      // Construct the jdbc url.
      String host     = "...";
      String port     = "...";
      String instance = "...";
  
      String url =
        "jdbc:oracle:thin:@//" + host + ":" + port + "/" + instance
        ;
      ods.setURL(url);
  
      // No connection re-use.
      exec(ods.getConnection());
      exec(ods.getConnection());
  
      // Connection re-use. (Connection pooling)
      OraclePooledConnection opc = (OraclePooledConnection)((OracleConnectionPoolDataSource)ods).getPooledConnection();
      exec(opc.getConnection());
      exec(opc.getConnection());
    }
  }
  

  Product output similar to:

  Session id: 4110149
  Session id: 4110150
  Session id: 4110151
  Session id: 4110151
  

  Note: when the pooliing connection is used, the session of database id is the same. Call close() has not closed the physical connection.

  A cache of connections is a layer on top of pooled connections that manages the creation and destruction of the connections. There usually limits this link how much should be open and the maximum number of connections to allow. Then the cache is queried for a connection, it can return the one that is not in use or perhaps create a new.

  Later versions of the JDBC driver will greatly simplify managing your connections and here is the note of documentation:

  Note:
  The previous cache architecture, based on OracleConnectionCache and OracleConnectionCacheImpl, is discouraged. Oracle recommends that you take advantage of the new architecture, which is more powerful and offers better performance.

  Any reason you're not not using a newer driver?

• Norton 360 Connection Wizard does not work with Firefox 17

  I just upgraded to Firefox 17 and found that Norton 360 "Connection Wizard" (officially named Identity Safe) no longer works. He does not fill in the username and password fields. It worked great and did all the right things when I was using Firefox 16. There is probably a miracle solution, but in the meantime, I had to go back to version 16. Impatience the problem is resolved.

  http://community.Norton.com/T5/Norton-toolbar-Norton-identity/Firefox-17-support-for-Norton-toolbar/TD-p/853416

• Internet connection sharing does not work anymore

  I have used Windows Vista Home Premium for 2 years now on my laptop. Internet connection sharing enabled to connect to the internet via my wireless adapter and allowed me to share my internet connection through the ethernet port. He worked for more than a year. All of a sudden 4 months ago Windows Vista doesn't let me share the internet connection more. When I go to networking and sharing Center, click on "Manage network connections" and it shows that my "Wireless Network Connection" is always set to share. So after reading several forums, I clicked on wireless network connections and click right properties. Then I clicked on the sharing tab, to make sure that "Allow other network users to connect through this computer's Internet connection" has been verified and that it is. After that, Windows Vista will not always share the internet. Someone suggested that I double check the IP version 4 and 6 on the wireless and Ethernet connection were defined on IP addresses obtain automatically, and they are. The computer still will not share the internet connection! I even took the manufacturer in the view of portable and made sure my cable modem Simulator wasn't bad. I took it to a computer store and we checked the crossover cable. Everything is fine! What else can I try?

  Obtain an IP address automatically is the wrong setting on the Ethernet connection.  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  DNS server: no
    
  Owner, Boulder computer Maven
  Most Microsoft Valuable Professional

• Connection Bridge does not work! Help!

  Hello guys.

  I have a problem for my connection work bridged on my virtual machine.

  Data sheet:

  : Server Debian Lenny 5

  3 IP is already configured in static and work

  Installed VMware Server 2. Great work.

  33580 10 vmnet

  15620 vsock 0

  VMCI 43620 2 vsock

  vmmon 60484 6

  Virtual machine installed.

  Ubuntu 9.10 Server with a minimum of gdm.

  The comments interface is configured with dhcp.

  I have setup the connection to the server bridged vmw to eth0: 1, the 3 ip address of the host. When I try ifconfig on the host I see vmnet1 and vmnet8 but I don't see vmnet0.  Anyway, until I reinstalled vmware, when I used to go to the bridge connection, after awhile the host lost the configuration of interfaces and all 3 ip addresses were assigned to the operating system virtual and strange and really stressing that it is.

  I'm a newbie on the use of vmware and I have never configured or managed bridged connection. What should I do in my case? I want almost just my virtual machine to share 1 ip with the host.

  And yes I tried to configure my interfaces with DHCP hosts, but after awhile, the configuration will automatically static...

  On the web interface of vmware, I see that the comments field is identified but all-IP. In any case, this area is not true, it's just a name I put. Maybe I need to set the host reviews domain too? Anyway, even the host is a domain. Host interfaces I just address; network mask; gateway for eth0 and just address and the mask for the other 2 remaining IP... all static.

  I'm googleing for quite awhile now, but the seams I can't solve. I'd love to read any suggestion. In fact I really need some advice.

  Thanks in advance.

  Tony1984 wrote:

  Nothing changed, ifconfig - a shows exactly the same thing I showed you on the previous posts.

  Good.

  Why they change?

  Because people tend to try things and posting them here.

  I don't spot anything.

  Good.

  Should I implement something?

  Not requested by me.

  You told me I couldn't have bridged connection after I showed you the ifconfig-a, but why?

  No, I didn't tell you that. I only told you that you cannot use an IP address on two hosts. The client needs its own unique IP address, but you announced, according to me, it doesn't even have an IP address.

  I don't want no special configuration. I just want to have regular bridged connection. What makes it 'different' in my case is

  I have 3 dedicated IP addresses, but I don't think it's a problem.

  It depends on where you use IP addresses. If they are already used on the host computer does not have one of them in the comments.

  You say: but remember, you cannot use the same IP address on two hosts at the same time. And you have two hosts

  (the VMware host and guest in VMware). This is the default configuration of vmware server?

  Regardless of if you use VMware or something different. Once you have created a system of comments (virtual machine) you have two hosts. The host where VMware Server works on and the virtual machine. And with each client, you add that you add a host computer. It is not complicated. It is the same as if you would add a physical host to your network. And each host needs a unique IP address. No matter if you use bridge or a NAT. It's as simple as that. Standard TCP/IP enterprise.

  I don't want to host 2 or I don't want this complicated thing.

  If you don't want two hosts, why you started with virtualization. It is the purpose of database virtualization. Add hosts without having to buy equipment for the new. Maybe you didn't know that the I mentioned the virtual machine also as host.

  Or perhaps what you mean, it's that I can't use the same static IP address on the host and the guest at the same time?

  Exactly! But that is not because you use filled, this is because TCP/IP works this way. All over the world, on all systems that use the TCP/IP protocol.

  I think you are missing some basics:

  VMware offers three types of failure of networks. All apply to all TCP/IP rules.

  Everything first a 'bridge' or VMnet0:

  When you use a connection open, the guest connects seamlessly to the network. By using its own MAC address and using its own unique IP configuration.

  Second, one is 'host-only' or VMnet1:

  Again, the client has its own unique valid IP configuration, but it is not connected to the physical network, but to a virtual (VMnet1). The host is also connected to VMnet1 via its virtual adapter VMnet1. VMnet1 is a separate IP subnet, it has its own subnet IP address (default something like 192.168.x.x).

  Third is "NAT" or VMnet8:

  It is also a virtual network as VMnet1 but here the host acts as a proxy for the guest. The host has its own unique and valid IP (from subnet IP VMnet8) address and uses a virtual IP address as its gateway to the outside world (physical network). Using NAT allows to hide the comments of the physical network because each package seems to come form the host.

  So, if you want to have your comments using a bridge connection, assign an IP address, which NO other host uses. Unfortunately I can't help you here, as you xxxxx'ed the information most important in your post, IP addresses. These IP addresses are the reason for which this information is requested in this forum. If they must be kept secret, you can xxx the first three digits of the address, but must appear at least in the last three games. Otherwise, we cannot check if they are correct or not.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• my bank home page very well, but after I connect it does not work.

  The graphics on the screen disappear, and what should be in the menu bars is listed on the left, an article on a line. This does not happen with IE11, and the esupport Bank Group said that they have not seen before.

  The problem was indeed the name of PrivacyBadger extension. Disabling makes the problem disappears, which is goodness.

• Connection options does not work after FileVault on

  Something weird happens after I turned on FireVault. The parameters"Connection Options"have no effect. For example:

  1 "screen as login window:' only works like"List of users"while I have"Name and password"selected, and I would like to see the last when I login.»

  2 "menu entry display in the login window" is always enabled, displays the language of the keyboard at the stop to the right of the window, even if the function is not enabled in "System Preferences."

  3. the icon of the guest user is displayed in the login window, despite the fact that the guest user is disabled in "System Preferences."

  Help, please! How can I make these features work and be the same as they were before I enabled FileVault. As it is, I'm not satisfied with how the login window is displayed.

  Thank you!

  PS Booting up now takes a lot more time, after activation of FileVault, when the HARD drive was not encrypted. Is this normal?

  Connection options have no effect on the displayed by FileVault pre-seed authentication dialog box. You can not modify this dialog, except by adding and removing users. If you disconnect without restarting, the connection dialog box will be in accordance with your settings.

• internet connection wifi does not work after entering safe mode

  It works when I connect it to the router with cable, I had this problem before & there was a command typed in cmd that solved but I can't remember it, any help?

  Interesting... If you have booted without failure then you restarted in normal mode and your wireless settings no longer work?

  UH... Well the first thing I would do is to disable and reactivate my wireless card.  The second thing I would do is check I get an IP address on my wireless network, this is done in the command line (cmd) by typing "ipconfig".  If you get an IP address then you know that your router works on the dhcp protocol, but to confirm I would ping the router, which will be your entry door, which is usually something like "ping 192.168.1.1".  If you do not have an IP address, you should try to renew and see if you can buy a... "ipconfig / renew".

  In addition, you will need to check that you are actually connected to a wireless network, it should appear in your software wireless windows, or you proprietary wireless NETWORK card software.

• Internet connection suddenly does not work

  My computer suddenly stopped being able to connect to the internet.

  I use a Belkin Surf & share Wireless... Dongle USB and never had any problems before.
  The router works fine, I connect to it on my roommates Mac here where I am writing this question.
  If I can connect to the router and system tray icon says I'm connected. But when I open Chrome or Opera or try and connect to a FTP server (which I need to do for work!) I can't make the connection and the sys tray icon changes from normal to problem with yellow exclamation sign. When I run a diagnosis it is no problem, and when I look at the details, he said "it can be a problem. The funny thing is that sometimes this translates the sys tray connection status icon back to normal and very occasionally, I am able to load a web page, but then the connection breaks again.
  Here is the ipconfig/all command Info:
  Windows IP configuration
  HostName: Windows7-PC
  Primary DNS suffix: -.
  Node type: hybrid
  Active IP routing: no
  WINS proxy enabled: no
  Wireless Network Connection 10 wireless LAN adapter:
  State of the media: Media disconnected
  The connection-specific DNS suffix:
  Description: Microsoft Virtual WiFi Miniport Adapter [hash] 5
  Physical address: 94-44-52-DA-8B-FC
  DHCP enabled: Yes
  Autoconfiguration enabled: Yes
  Wireless Network Connection 9 wireless LAN adapter:
  The connection-specific DNS suffix:
  Physical address: 94-44-52-DA-8B-FC
  DHCP enabled: Yes
  Autoconfiguration enabled: Yes
  Link-local IPv6 address: fe80::c15f:f4be:4165:1f8a % 52 (Preferred)
  IPv4 address: 192.168.1.29 (Preferred)
  Subnet mask: 255.255.255.0
  Lease obtained: June 12, 2013 09:39:40
  End of the lease: 12 June 2013 11:09:47
  Default gateway: 192.168.1.1
  DHCP server: 192.168.1.1
  DHCPv6 IOOKING: 915686482
  DHCPv6 DUID client: 00-01-00-01-15-B7-8A-65-00-25-22-B2-47-29
  DNS servers: 89.101.160.5 / 89.101.160.4
  NetBIOS over TCP/IP: enabled
  Then, there's stuff on tunnel adapters
  I really need to make it work for my work, ideas, what could be the problem?
  Thank you
  D3

  Hello

  To provide the proper resolution, I would need more information on your side.

  1. deal with any issue while using Internet Explorer?

  2. is the specific issue while trying to open the FTP server?

  3. deal with any issue while accessing other Web site?

  This problem may occur corrupt or incompatible drivers, missing updates or because of incorrect network connection settings.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  
  Method 2:
  If the problem persists, I suggest you try to reset TCP/IP. Check if it helps.

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  See the article and check if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.