SQL Developer debugger does not start

Similar Questions

• Extension of SQL Developer Java does not

  Hello

  I developed a small extension of Java to start the SQL Developer via command line and put some parameters such as the server name, user and password to create a connection when you start.

  THS connection will be deleted when closing.

  This extension was working fine until the 3.0.2 version and does not work with version 4.0.2.

  My question: are there changes in the load of an extension?

  Any help would be appreciated, thanks.

  
  

  I developed a small extension of Java to start the SQL Developer via command line and put some parameters such as the server name, user and password to create a connection when you start.

  THS connection will be deleted when closing.

  This extension was working fine until the 3.0.2 version and does not work with version 4.0.2.

  My question: are there changes in the load of an extension?

  Yes - there are MAJOR changes and they include the use of "lazy" loading of extensions.

  See note on the main page of Oracle extension exchange.

  http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/Extensions-083825.html Special Note regarding Extensions developed prior to SQL

  Developer v4.0:

  With the new version of SQL Developer 4.0, an extension that was written for an earlier version of the SQL Developer will no longer work. Developer SQL is based on the JDeveloper Framework. We have updated the framework to be up-to-date with the JDeveloper 12 c version. With JDeveloper 11 g 2, they switched to an OSGI framework. The JDeveloper team issued instructions to update your extensions to be compatible with the new framework and SQL v4.0 developer.

  Note that first sentence than the previous expansions 'won't work' If you use them in 4.x

  It also appears to be bugs or incompatibilities between the extension of JDeveloper published SDK and the "new" version Sql Dev 4.x uses. The public is 12.1.2, and is one that is available for download for use in the development of an extension. SQL Dev uses version 12.1.3 and who has NOT yet been published.

  I have a new thread posted recently to ask about any aspect of this compatibility, but have not yet had all the answers:

  https://community.Oracle.com/thread/3570408

  A few simple extensions, perhaps yours, may only need a small change in the file "extension.xml" use appropriate brackets.

  Other extensions will require additional changes. One of the main changes is the new ESDK of "lazy" loading of extensions use.

  Some additional info is available on the Java.net site:

  https://Java.NET/projects/jdev-extensions/pages/trigger-hooks

• Debugger does not start

  Hello

  I use Oracle SQL Developer 4.1.0.19, I am facing in comical situations, I have recently started using the debugger with SQL Developer and when debugging a debugger function to give me information correct, but after some time, it seems it started and immediately stop and show me the following lines:

  Connection to the database Test KIC on the IMC server.

  PL/SQL execution: ALTER SESSION SET PLSQL_DEBUG = TRUE

  Running PL/SQL: CALL the DBMS_DEBUG_JDWP. CONNECT_TCP ('192.168.1.39', '50941')

  Debugger agreed database on 50941 port connection.

  Running PL/SQL: CALL the DBMS_DEBUG_JDWP. DISCONNECT()

  Process is complete.

  Disconnection of the KIC Test database on server of BMI.

  Debugger disconnected from the database.

  Any help will be appreciated.

  Kind regards

  I just find that before running the debugger I have to click on the compilation for the debug option.

• Developer SQL does not start on Mac OS x Lion

  Hello
  
  hoping someone can help me with this one, I've been running 3 SQL Developer on the macbook no problem for about a year, I have recently updated to Mac OS x Lion and now when I try to start SQL Developer, he is not running.
  
  I downloaded and installed the latest version of java, as noted on the download page of SQL Developer.
  
  When I start the SQL Developer and view the activity monitor the 'bash' process starts to use 100% of the CPU very quickly and Developer SQL can't yet to the start screen.
  
  Can someone point me in the right direction in terms of diagnosing this problem? Is there a log file I can see again or how to start the SQL Developer with specific arguments?
  
  Kind regards
  Stu

  Developer SQL works for me on my Macbook the Lion. Corresponding host Java looks like:

  /System/library/Java/JavaVirtualMachines/1.6.0.JDK/contents/home

  Here's how my conf file is set up:

  AddVMOption - Dcom.apple.mrj.application.apple.menu.about.name = "SQL_Developer"
  AddVMOption - Dcom.apple.mrj.application.growbox.intrudes = false
  AddVMOption - Dcom.apple.macos.smallTabs = true
  AddVMOption - Dapple.laf.useScreenMenuBar = true
  True SetSkipJ2SDKCheck
  SetJavaHome /System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home
  AddVMOption - Xbootclasspath/p:... /... /RDBMS/jlib/ojdi.jar

  (/ Applications/SQLDeveloper.app/Contents/Resources/sqldeveloper/sqldeveloper/bin/sqldeveloper-Darwin.conf)

  Good luck!

  -Andrew Wolfe

• the inventory of VMware service does not start, the wrong function, bad sql server port

  I've migrated vcenter SQL database to a new server after this KB

  https://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 7960893

  but now most of the vcenter services does not start cause of according to the inventory service.  I see service log of inventory which is the problem, it tries to connect to SQL Server by default, 1433 port, but my SQL server instance is listening on a different fixed port, I don't want to change.  Where can I configure the inventory service we another port of SQL Server?  According to a KB related to the above, it is possible to do

  https://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2033516

  but unfortunately I have vcenter 6 and the instructions above do not seem to apply, I can't even find ssocli, the mentioned folder structure does not exist on my installation

  
  Thank you.

  I solved this.  Despite what has been reported in the newspaper the issue was not the port.  The new database is a named instance, the connection string for vcdb.properties, he entered as the server name = hostname\instancename in fact, it is necessary to use two slashes return hostname\\instancename :-/

• vCenter Server Service does not start after P2V

  Hello community.

  A problem that I have not been able to solve and looking for help.

  Problem:

  vCenter Server Service does not start after that Windows Server was P2V would be.  We get an ERROR 2 of the Service.  Get the error of the system Windows 7024 event log.

  History:

  The client, I currently work with that tries to smash to the high location of the DEV VCENTER.  Location of DEV vcenter works now all for this site (domains, dns and all development servers).  If its VCENTER PRODUCTION of this location.  Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box.  Let's break the SSO, SQL and VCENTER in their own servers.  However, the client wants to re - use the current physical server for SQL Server.  So I need P2V physical server existing until I can start the new environment.

  I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works.  Fails every time with the 2 ERROR Code.  I was unable to get a KB of VMWARE item that corresponds to the issue I'm having.  ERROR 2 code has many articles and none have worked.

  Details:

  vCenter 5.1 Build 799731

  SQL 2008 R2

  Windows 2008 R2

  When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

  Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

  When I saw the Windows system event log I get this error:

  EVENT ID: 7024

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

  2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

  2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

  2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...

  2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached

  2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception

  -> Backtrace:

  -> backtrace [00] rip 000000018018977 a

  -> backtrace [01] rip 0000000180100 c 98

  -> backtrace [02] rip 0000000180101fae

  -> backtrace [03] rip 000000018008aeab

  -> backtrace [04] rip 00000000005 b 4971

  -> backtrace [05] rip 0000000000551298

  -> backtrace [06] rip 00000000005516 c 9

  -> backtrace [07] rip 00000000004c0fae

  -> backtrace [08] rip 00000001405bbfb8

  -> backtrace [09] rip 000000013f4b0078

  -> backtrace [10] rip 000000013f4b016a

  -> backtrace [11] rip 000000013f4b0279

  -> backtrace [12] rip 000000013f4b0609

  -> backtrace [13] rip 000000013f7f2903

  -> backtrace [14] rip 000000013ff9e4b9

  -> backtrace [15] rip 000000013ff9835c

  -> backtrace [16] rip 00000001401b8a3b

  -> backtrace [17] rip 000007fefedca82d

  -> backtrace [18] rip 000000007783652d

  -> backtrace [19] rip 0000000077ccc521

  ->

  2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603

  2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote

  2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now

  I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate.  Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter.  All Services have been changed for local accounts.  All network and ODBC parameters are able to see the server... aka the server can see.  I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...

  Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems.  Only when its summer P2V would have done that themselves.

  I can't get this number.  Need help.

  Thoughts?

  Thank you

  BostonTechGuy

  In this case, we have finished rebuilding the vCenter and all migrate on.  Wish had better put up-to-date, but ultimately, it's what has been done.

  Thank you

  BostonTechGuy

• Portege R100 laptop computer does not start after a while without food

  Hello

  Well there is some time, I bought a beautiful used R100 - a laptop Toshiba in passing - but now, she has developed an annoying problem. Whenever it disconnect the laptop from the power supply for more than 2 hours about (don't know if this is not longer) I can't begin the R100, even if the battery indicator is green. After pressing the powerbutton the power led lights in green, and nothing happens. The "solution" to this problem is to give the R100 some time in this 'turned on' - State and after 15 minutes, I am able to start the computer (turn market again).

  I think that this could be a problem with a battery on the motherboard that is at its limits and needs time to gather enough power to start the computer.

  I hope you can help me identify the problem with my beloved laptop :)

  Yours,

  Tobias

  p.s. I have more or less need to identify the problem and some tips how to solve - the pleasure with the surgery will be from me :)

  p.p.s. Unlike the problem of the M400 further down, I've won if the beginning focused on the hard disk to Flash. In my case the R100 does not give a glance if it does not start. - And as a reference to the other post: "Hmm, I don't remember of the R100 fan not have it at all" * huggs its r100 * "."
  And I tried unplugging all the bits of the laptop and removed the battery, waited 15 minutes and tried to turn it on. the only way to obtain the departure of r100 is the method described above.

  You have an additional RAM installed?

  Maybe you need to re-seat, or it has a intermittent or heat associated with problem.

• Windows 7 Enterprise does not start successfully after re - install

  I have just reinstalled Windows 7 Enterprise 32-bit with SP1 on my laptop HP 6715 b. (I use 32 bits for any software that I develop is always compatible 32-bit.)

  After you have re-installed however, it does not start correctly. What came with windows announce "Starting Windows", but the following animation never - start the four lights that turn and turn into the "Flying Windows Icon.  It then crashes right there - do nothing, no matter how long wait.

  If I can put the machine power off and re - start, we are at the "Windows Recovery screen" - because it has not started correctly the last time.  From there, I can choose to make a recovery and return to the last Point of good restoration, i.e. on a freshly installed system before the update of Windows, of course.

  If I select "Start Windows normally", it starts however. But it is not 'Normal '. For example I can't finish my "Windows Easy Transfer".  It says that it cannot connect to my domain name - even if I am connected to my area and have been using it to install other software.

  Or I can do a Windows Update "normally". The last time I tried, it is gone for hours without finding what be - so I left it overnight. In the morning he had apparently found nothing yet.  However when I turned off the machine and then turn it again - he told me there are 211 updates installed.  WHO has literally all day.

  I'm not happy to come back to the last good Restore Point.  I did once.  He has NOT fixed the problem.

  I also tried:

  • Using MSCONFIG to disable all the startup and Services, apart from Microsoft and Kaspersky - no improvement.
  • Do a CHKDSK - revealed nothing.
  • Start in Safe Mode, did change his behavior.  This time I do not have the Herald "Starting Windows".  But turn the machine works again once, return me the 'Windows Recovery screen '.

  Ideas anyone? I'm at my wits end.

  It's OK guys.  I have it sussed.

  He was objecting to the fact that I had my USB with my "Windows Easy Transfer" files on it, plugged during the initialization of the system.

  Also, I was wrong in my thinking on how "Windows Error Recovery".  I assumed that he would do all that it checks before proposing to do a system restore.  It is not, it suggests a restore of the system first.  If you say NO to that, then he makes his audit.

  What is finally here, is that I finally chose an option before he went into the system recovery.  Then, I waited until he was asked to do a system restore.  I said NO, so he went in it checks.  He went through his analysis and finally concluded it was some "system unspecified device" recently added.

  Well I haven't nothing added to my machine for years.  So, I was puzzled.  Then I thought ' well, I don't normally have my key USB is plugged. "  I wonder... ».  I therefore disconnected the USB drive and rebooted the machine.  The rest they say is history.

  Hope this sorry tale helps someone else.  It just cost me four days!

• Debugger does not stop at breakpoints

  The debugger does not stop at breakpoints for most of my applications.

  I also created two new projects using the templates provided to Hello World, for a project, that it stops on my breakpoinbeing the first line to the breast

  ApplicationUI::ApplicationUI () :

  QObject()

  Sometimes, for the second project he doesn't stop... very frustrating.

  I tried this on two separate devices, either via wifi either by using the USB connection.  I'm running this on a new thinkpad with tons of ram and an ssd, Os is Windows 8.11 and I installed the 64-bit version of momentics...  I also tried to use the SDK 10.2 and 10.3 with the same results...

  Very strange, I copied the project in another directory and then it re-imported in the workspace and then debug started working again.

  Must have been a thing of directory permissions.  in any case, I just wanted to post the resolution of other interests of peoples...

• Debugger does not stop at breakpoints for some applications

  The debugger does not stop at breakpoints for most of my applications.

  I also created two new projects using the templates provided to Hello World, for a project, that it stops on my breakpoinbeing the first line to the breast

  ApplicationUI::ApplicationUI () :

  QObject()

  Sometimes, for the second project he doesn't stop... very frustrating.

  I tried this on two separate devices, either via wifi either by using the USB connection.  I'm running this on a new thinkpad with tons of ram and an ssd, Os is Windows 8.11 and I installed the 64-bit version of momentics...  I also tried to use the SDK 10.2 and 10.3 with the same results...

  Very strange, I copied the project in another directory and then it re-imported in the workspace and then debug started working again.

  Must have been a thing of directory permissions.  in any case, I just wanted to post the resolution of other interests of peoples...

• PlayBook Simulator does not start in vmware.

  I had just installed sdk playbook and Simulator on windows 7 and configure the Simulator on vmware.

  But the playbook Simulator does not start on vmware... He simply display the splash screen...

  Do you have another computer to try out it?

  For example, in my case, I have 3 PC. Two of them the Simulator installed and worked well, the third, no matter what I do I can't get the Simulator to go beyond the start screen.

  I even took a suspended version of the Simulator everywhere for my 3rd machine, and it has run for a little while so locked up when I tried to activate the mode of development. However, VMWare works perfectly for other sims installed on this machine (but with VMTools installed in the virtual machine), then it is not a VMWare question by itself.

  Personally, I think that unfortunately for certain combinations of hardware/OS simulator simply does not work.

  FWIW my 3rd machine is underpowered with only 2 GB of ram, an Intel ATOM (z520) processor and a GMA 500 GPU which are pushed along Windows 7.

  HTH - Rufus

• Z10 Z10 blackBerry does not start since then try a secure erase

  I had problems where none of my text messages have been moved during the previous Blackberry, such as reported earlier today. I was also disappointed by the speed of handset, BBM for example would take at least 5 seconds to load (now on my old torch), so I made a secure erase so I could try the installation again. This seems to have been a mistake, as the handset now does not start. I see "Blackberry" appear for a second, then get a logo that seems to be asking me to connect the unit to a PC. It does nothing - the PC does even not record that a device has been plugged in. After a minute or so, the screen fades and the handset appears just to turn off. I'm very disappointed in my first day with the handset - far from a smooth experience as it should be, I was left the impression that OS10 is still in early beta development.

  What can I do to remedy this?

  kb33480 should help you.

• Research in Motion driver device network does not start

  I spent the last two days, trying in vain to connect my playbook with my computer via usb.

  I tried a lot of things I've read on the messages that other people have done to solve similar/identical problems, but none of them have absolutely made no difference at all for me.

  Quick summary:
  -The playbook has updates.
  -The usb cable is fine as the playbook connects correctly to a different machine of windows 7.
  -The usb ports are fine (tried many of those on this machine), other devices connect without problem.
  -Have you tried Blackberry Desktop and Device Manager, 7 and 7.1.
  -Playbook has wifi off and regular file sharing on.
  -Have you tried to adjust the 'windows' and 'auto-detect' options of connection on playbook.
  -I uninstalled/installed the Device Manager, Office Manager and the individual drivers several times, with and without restarting the computer and the playbook.
  -Turned off firewall and anti-virus
  -Removal of all applications start and all non-microsoft services.
  - And many other things that I forget immediately.

  I don't think that anything I have read that I have not has tried.

  The problem is very specific. The network adapter (Research in Motion Network Device) seems to be able to install correctly but does not start. After installation, for a few seconds, it is said works normally, then change to the yellow triangle with exclamation point and Driver Details indicates that he failed with code 10, although sometimes the error number is different.

  I watched the windows event logs and it has entries by the driver, not to start but no explanation as to why.

  Has anyone else had this problem? And if so, what can I do about it? Please, I've spent days messing around and I can't spend more time on this nonsense.

  It's weird, I never had a problem one of my devices Android or Apple connection to this computer, only this device. Very discouraging.

  Hello

  There is some information on blackberry - deploy here:

  https://developer.BlackBerry.com/native/beta/documentation/com.QNX.doc.native_sdk.QuickStart/topic/r...

  It's for BB10, but it works on the PlayBook as well.

  You must enable the developer mode on the PB. The IP address is the general number of the machine's IP - that gets it to your wireless infrastructure - not the INVESTIGATION period specific developer, which I think is only used for the USB connection.

  The problem with the deployment on wifi, it's BB tends to close the wifi interface, if you do not use it for a while. So, I think that before you deploy, I often use the Web browser on the BB to wake up the network.

  It's all a bit wildfire, to be honest. I'd rather have the USB works, but (for me) which could be a Linux issue, not a BB one.

  Best wishes

  Kevin

• VMWare Virtual Center Server does not start after Windows Update

  Help!  I'm under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

  Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  and error 1000 in the Windows application log:

  Could not initialize the VMware VirtualCenter. Closing...

  PS - I confirmed that the SQL instance is running.

  Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a "space" condition, but there are a lot of available space.

  I have attached the file vpxd.log, he created.

  Clues?

  Thank you.

  OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.

• My performance of the Lightroom Develop Module does not work correctly.

  My performance of Lightroom is not great.  After you have installed the appropriate NVIDIA, GeForce card GTX 970 graph with 4 Gig of Ram, Windows 10 (latest version) with 32 Gig RAM and the latest version of Lightroom CC (2015.3), I am always facing update slow in the develop module image.  The software does not remember the excerpts that I created (1:1).  Whenever I click on a photo of the flows, the share of the image of being clear-> blur-> to clear, which take about 15-20 seconds.  This happens even though I have already generated previews 1:1 for all images in the catalog.  I need help to set the settings so that I can have a good experience with lightroom.

  I tried to follow some recommendations:

  1. leave a 160 Gig camera Raw Cache framework

  2. install an SSD for the start and placed the catalog Lighttroom and Cache folder under the default Images directory, under the my account profile

  3. has created a new catalog that is less than a few LIVE in size

  Posted below is my System Info.   Is there anything else I can do to make this work?  It's very frustrating!

  ---------------  SYSTEM INFO ------------------------------------

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.5 GHz

  Built-in memory: 32717,7 MB

  Real memory for Lightroom: 32717,7 MB

  Real memory used by Lightroom: 925,4 Mo (2.8%)

  Virtual memory used by Lightroom: 1086,4 MB

  Memory cache size: 0.0 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX, AVX2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  GeForce GTX PCIe/970/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 359.00

  Rendering engine: GeForce GTX PCIe/970/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\Johnny\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\Johnny\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) home canon Plugin

  (2) Facebook

  (3) Flickr

  (4) HDR Efex Pro 2

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  (7) perfect B & & W 9

  (8) perfect effects 9

  (9) perfect improve 9

  (10) perfect photo Suite 9

  (11) perfect Portrait 9

  (12) resize perfect 9

  Config.LUA flags: None

  Map #1: Seller: 10de

  Feature: 13 c 2

  Subsystem: 29783842

  Revision: a1

  Video memory: 4008

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  I uninstalled Lightroom CC.  renamed the Lightroom to my profile folder, rebooted the PC.  Reinstalled lightroom CC, choose to create a new lightroom catalog, any of a local session of my C:\ Image folder.  The behavior is the same.  Lightroom does not remember previews and continuous 'loading' and make turn the wheel little whenever I click on an image of the band.  It's crazy...

  You're clicking on between images in the Strip to develop? The develop module does NOT use 1:1 previews. Those that are used only in the library. Develop, Lightroom must load the raw file and return each time, this isn't a good solution to quickly go through images to work to develop. It should take a few seconds to fully make a new raw image loaded it depending on the size of your images are. If you want to speed up switching to develop image there are solutions. One is a raw cache big camera, that you already use and secondly to disable acceleration of graphics card, which, if enabled, slows down the initial loading. Finally, you must ensure that you are the 2015.3 or the 2015.1.1, and that you do not have 2015.2. Version 2 had several bugs that could slow this process terribly.

  15-20 seconds is extremely long for this process of loading in my experience. I can't get it to be slow on a much less powerful system than if the files are > 500 MB high resolution stitched tiff files. Not with RAW files (I pull a 24 Megapixel). If they are raw files, something is wrong. You have turned off the facial recognition?