SQL Loader in error after the modified table
Hello
"I had a column in the table that was initially defined as VARCHAR2 (250), I changed the table and made 1000, when the data is over 250 characters sql loader is in error"
Field in the data file exceeds the maximum length. The table shows the field in VARCHAR2 (1000). Help, please.
Thank you
Gwenaël
I changed the table again to make VARCHAR2 (4000) and still have the error. My data are about 350 characters. Help, please
Change to the column sqlldr control file and explicitly set tank (4000). The default data in sqlldr type is char (255).
Tags: Database
Similar Questions
-
SQL Loader control file (.ctl) given in table
Hello
I have a table 'region' in my schema called dss.
SQL > desc region
I want to LOAD the data into this table of the region in a file called "region.tbl" located at d:\tpch\region.tbl, using a CONTROL file that is also on the the same place is to say d:\tpch\region.ctl.
R_REGIONKEY
R_NAME
R_COMMENT
Region.tbl file contains few records. Recording of a SAMPLE of region.tbl is as follows:
* 1 | AMERICA | HS ironic use, same request. s | *
Region.CTL file contains the following lines to load data using sql loader:
DOWNLOAD THE DATA
INFILE'd:\tpch\region.tbl'
IN THE REGION OF THE TABLE
FIELDS TERMINATED BY ' |'
* (R_REGIONKEY, R_NAME, R_COMMENT) *.
so I go to the command prompt, navigate to the location of the above files and run the command:
D:\TPCH > sqlldr control = region.ctl dss/dss = userid
and get the following error:
SQL * Loader-128: unable to start session
ORA-01017: name of user and password invalid. connection refused
I have the same table under the "system" user creation, but I get a different error with this that is:
SQL * Loader-941: error when the table REGION describe statement
ORA-04043: object REGION does not exist
Using Oracle 11 g on my Windows XP.
I'll appreciate the valuable suggestion.
Thank you very much.
Best regards
KamYou can connect with dss/dss? For example, what
sqlplus dss/dss
If no, and you are sure that the name of username/password combination is correct, have you checked things like $ORACLE_SID - i.e. it points to the right database?
-
Hello
I have this CTL file as below:
DOWNLOAD THE DATA
INFILE 'PRODUCT_*.csv '.
ADD
IN THE PRODUCT_CONFIG TABLE
"WHEN <>(1:3) and (1:3) <>' 99" and <>' 00, «,» (1:4),
FIELDS ENDED BY ',' POSSIBLY FRAMED BY "" "
TRAILING NULLCOLS
(
PARTNUMBER NULLIF PARTNUMBER = BLANKS,
NULLIF LABEL = BLANKS,
NULLIF SEQUENCE SEQUENCE = BLANKS,
NULLIF DISPLAY_FLAG DISPLAY_FLAG = BLANKS,
BILL_PERIOD NULLIF BILL_PERIOD = BLANKS)
However, I got this error when I run my file:
SQL * Loader-350: error of syntax in line 6.
Expecting "(", found "99".
"WHEN <>(1:3) and (1:3) <>' 99" and <>' 00, «,» (1:4),
How can I change my code to solve this error?Hello
After your data, I created a test table and load the data successfully. See if this example helps you
CREATE TABLE test ( col1 VARCHAR2 (20), col2 VARCHAR2 (30), col3 NUMBER, col4 NUMBER ); load data truncate into table test when ( col1 !='00') and (col1 !='99') FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS (col1 char(20), col2 char(30), col3 integer external, col4 integer external ); {code} Regards
-
Can't access iscsi with ' error in the evaluation table display iscsilist IndexSizeError:
I have been using my readyNAS years and today, after having extended a target (in volume), I can't access the Volumes-> iSCSI tab anymore.
SOS!
I really need.
The error I get in FF:
"Error in the evaluation table display iscsilist IndexSizeError: Index or size is negative or greater than the quantity allowed.
It's a bit different in Chrome, but it won't let me copy it.
Error in the evaluation table display iscsilist IndexSizeError: cannot set property 'maxLength' on "HTMLInputElement": the provided value is (-1) is negative.
Any suggestions please?
Thank you!
It was super useful:
I downloaded the update of intermediate as a file and updated firmware to update.
And now I can access the iscsi again tab.
MDGM, thanks a lot!
I'm a happier person now!
-
Explorer.EXE error after the restoration of the ERD Commander
Dell Inspiron B130
Windows XP Service Pack 2
Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.
I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.
Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?
Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?
Hello
What is the full and exact error message?
Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.
Reference:
To start the computer in safe mode
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
How do I recover from a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545 -
LSD unexpected closing of the errors after the installation of el capitan
LSD unexpected closing of the errors after the installation of el capitan
get a lot of errors after start-up and during work
This procedure will remove some cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.
Please, back up all data.
Triple-click anywhere in the line of text below on this page to select this option:
open $TMPDIR..
Copy the selected text in the Clipboard by pressing Control-C key combination.
Launch the Terminal application integrated in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste in the Terminal window by pressing command + V. Depending on the web browser you use, you may need to press the return key. A folder with a long, random name should open. Inside, there should be a subfolder named 'C '. Drag that to the trash.
Log off or restart the computer. Empty the trash. Test.
-
Re: Sql * loader 11g - error ORA-12899
My incorrect file has 2 first recordings like this:
MEMB_NUMBER, ID_NUMBER, ASSIGNED_MEMB_NUMBER, ASSOC_AMT, ASSOC_TYPE, DATE_ADDED, DATE_DE_MODIFICATION, OPERATOR_NAME, USER_GROUP, LOCATION_ID,
0000000107,0000828633, 1.5, J, 22-FEB-02, 12-JUN-02, MSUM080_MEMB_CONV, 00.
0000002301,0000800007, 297,5, J, 03-AUG-00, 12-JUN-02, MSUM080_MEMB_CONV, 00.
My Log file says:
Sheet 1: Rejected - error on the OWBREP table. MEMB_ENTITY, column ID_NUMBER.
ORA-12899: value too large for column 'OWBREP '. "" "" MEMB_ENTITY '. "" ID_NUMBER"(real: 20, maximum: 10)
Sheet 2: Rejected - error on the OWBREP table. MEMB_ENTITY, the ASSOC_AMT column.
ORA-01722: invalid number
Description of table target:memb_number VARCHAR2 (10 Byte) There ID_Number VARCHAR2 (10 Byte) There assigned_memb_number VARCHAR2 (15 Byte) There assoc_amt Number (14.2) There assoc_type Char (1 byte) There date_added Date There Date_Modified Date There operator_name VARCHAR2 (32 Byte) There user_group VARCHAR2 (2 Byte) There Location_id number There
Can you please tell me why the sqlldr throw error? The data looks correct to me.Hello
seems your control file command is not sync with the order of the tables, I think it would be
FIELDS ENDED BY ',' POSSIBLY FRAMED BY "" "
TRAILING NULLCOLS
(
MEMB_NUMBER,
ID_NUMBER,
ASSIGNED_MEMB_NUMBER,
ASSOC_AMT,
ASSOC_TYPE,
DATE_ADDED,
DATE_MODIFIED,
OPERATOR_NAME,
USER_GROUP,
LOCATION_ID
)
Try with this
-
SQL * Loader - can I specify the log file in the control file
SQL * Loader - can I specify the log file in the control file? If so howYes,
Try sqlldr "echo $command_line_par".
Note: ' back quotes
Kind regards
-
Error after the DDL script loading
Hi all
I am running Oracle 10 g on my machine. I have create an ER diagram in Toad Data Modeler, which includes all the keys, constraints etc..
I generated a DDL script that I want to biuld my tables with Oracle.
I loaded the script using SQL DDL * more calculation sheet and there is no problem.
I then tried to insert test data in my tables and I get an error code:
ORA-00942 table or view does not exist.
Now, I know that the tables have been created and also check with the dictionary of data using
Select table_name
from user_tables;
TABLE-NAME
=========
Table1:
Table2
Table 3
.
.
etc.
It shows then all 20 of my paintings, as shown above. I use a Visual Basic front-end and I can see all 20 tables that are listed with the names of attribute for each table.
So guys, where wrong me?
Thanks in advance,
OracleTechieLog in as a SYSADMIN & problem SQL below
Select * from 'customer '.
-
BPEL process stopped polling after the displaced Table
Hello
Oracle 10.1.2
SOA Suite 10.1.3.4
We have a process BPEL has been deployed and working for a while. This process is defined to query a table in every 5 seconds and set the State on BPEL_POLLED once found. It was working fine until I dropped and re - recreates the table that was questioned. (No changes have been made to the structure of the table - I was mearly testing a build script).
This table was recreated, the BPEL process stopped polling. I have re-deployed service, stopped and started the server and it is not the voting table.
May I take it that drop and recreate the table being queried have an impact on the electoral process and I looked through the forums, but I don't really know what I'm looking for?
I'm not a developer, BPEL, however I was left the task of working through this, any help would be appreciated.
Concerning
JBHi James,
This is an expected default behavior (in 10.1.3.4 MLR #7 from at least). The State of the process is set to 'stop' if the vote fails with a SQL error. If you look at the log file, after you turn on debugging, you'd be able to see an explicit message that indicates that the process is currently disabled.If you simply change the status of the process to 'On' even once, it would begin returning.
Or to be on the safer side, if you want to change the structure etc. of the voting table, its best to withdraw from the process, modify the table and then activate the process.Hope this helps,
Kind regards
Yohanna.
http://www.prshanmu.com/articles -
Reference SQL Loader Bind Variables in the when Clause
Support for SQL: SQL * Loader: version 8.0.6.3.0 (don't ask, it runs on Oracle EBS 11i...)
I have a case where my sample data looks like:
and another fileHD00100001002 SM00100002CHAPS 99999999999 20120906GBP0000000000001000000000001
Essentially, I need to apply another "IN" clause for each record of SM depends on the ack_type (char 13 on HD recording), either 1 or 2HD00100001001 SM00100002GBP0000000000001000000000001
I tried setting up the ack_type with a variable binding but find how to reference.
Example of control file:
The code above does not work, it is said that: ack_type is not recognized. Is there a way to do it, given the former character of the SQL Load version?-- $Header: test.ctl -- LOAD DATA REPLACE -- Record Type HD : File Header INTO TABLE test_table WHEN rec_id_no = 'HD' TRAILING NULLCOLS (rec_no RECNUM, hdr_line CONSTANT 'H', rec_id_no POSITION(1:2) CHAR, file_number POSITION(3:5) CHAR, sequence_number POSITION(6:10) CHAR, status POSITION(11:12) CHAR, ack_type POSITION(13:13) ":ack_type", co_id POSITION(14:21) CHAR, dept_id POSITION(22:24) CHAR, btch_no POSITION(25:36) CHAR, trans_id POSITION(37:42) CHAR) -- Record Type SM : File Summary INTO TABLE test_table WHEN rec_id_no = 'SM' and :ack_type = '1' TRAILING NULLCOLS (rec_no RECNUM, hdr_line CONSTANT 'L', rec_id_no POSITION(1:2) CHAR, file_number POSITION(3:5) CHAR, sequence_number POSITION(6:10) CHAR, ccy_code POSITION(11:13) CHAR, amount POSITION(14:26) CHAR, number_trans_ok POSITION(27:40) CHAR)
What is the database version 11i is running on? If 11 GR 2, this doc can help you in the use of the features that Dan mentions
How to use the 9i or 10g features in SQL * Loader for Apps? [423035.1 ID]
HTH
Srini -
Errors after the re-creation of synonyms.
I have a package which refers to approximately 7 synonyms. I recently had to recreate my synonyms because the patterns that they referenced have been moved to another host. So now, packaging and all other schemas referenced by the package are on the same host.
But when I recompiled the package after you recreate these synonyms, I get a plethora of error messages, 2784 including 2696, 2749, 2750, 2761, 2777, 2778, etc. They all seem to point to code that references the synonyms.
But when I run a select using these synonyms, it works.
So what could be wrong here? Why does compilation fail if names are working?
Thank you.You say that you can query the tables using a + select * + clause, correct? However, a procedure cannot find the tables.
I had similar problems and the reason was the privilege to access the table that has been given to the role, and he has issued to the user. If the privilege is granted to the user role cannot access the table within a procedure.
You can do a test done was + select * + in the table and after creating a simple procedure that accesses the same table. In this way, the selection should work, but the procedure should give an error. -
Lenovo A1000-camera error after the last update
Yesterday, I received an update notification. My mistake I didn't take more notes on what was this update, but I have the idea that it was on the build. After that, the camera back fails to start and give an error constant. Someone had a problem simiral or any idea of solution?
1 million thanks in advance
Today, after the update, finally the camera work. Thanks, LENOVO.
-
White loading bar appears after the splash screen. TAKES FOREVER TO FILL!
I recently formatted my windows xp because it was slowing down. I do this once a year and its good because my newly formatted computer takes 30 sec or less to load. However this time I formatted, after the screen intel and BIOS, a black scren appears for 1 minute, then an alternating black and white bar appears at the bottom. no text, nothing. This bar fills up until halfway, then the "xp" logo appears and the computer loads normally. the problem is that the loading bar takes 7 min + join to halfway. so my newly formatted computer load in 8-9 minutes rather than 30 seconds like its supposed to!
I tried to reformat, reinstall xp, but the same thing is happening: s
Once the computer loads however, everything works fine. It's just takes TOO long!Hi MontyPanesar,
Thanks for posting. Please, try the following.
1. place your Windows XP installation CD and start to her...
2. Press any button to start the Windows installation (don't worry... we do not actually use the installer at this point)
3. wait a few moments for the installation program starts, when you see repair an installation of Windows XP using the Recovery Console, and then press the R key
4. wait until you see this screen, enter the number of your master installation. (Typically 1 to C:\Windows)
5. press ENTER.
6. If you are prompted to do so, enter your administrator password. If you don't have one, leave the field blank and press to enter.
7. from the command prompt, type: chkdsk/r (note the space between chkdsk and / r)
Allow it to complete undisturbed.
8. remove the disc, then restart.I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I get this error after the last update WindowsUpdate_80200053
I have the 64 bit version of vist home.
After the last patch of weeks
"Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 64
"Download size: 25,7 to 82.7 MB.
I get the error WindowsUpdate_80200053. Also now I can't download active x controls, updated maleware deleting files (Spy bot s & D gives check sum errors), any web site, including the Microsoft Update download (I get warnings of the author is unknown and corrupted file warning.)
My wife has the 32-bit version and having the same problems.
Hello Stdonitus,
Please try the steps, in order to verify if there is no virus or Spyware issues below.
1. run the Microsoft Windows malicious software removal tool
2 download, install, update and run: (freeware) SUPERAntispyware and Malwarebytes' Anti-Malware (freeware).
3. run this analysis online (safe mode with network, if possible):
http://OneCare.live.com/site/en-us/Center/howsafe.htm4 see and follow carefully:
"Looking for / help with software, spyware software malware and Hijackware.If you need help with virus-related issues, contact the Support Services Microsoft product.
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
If you need more assistance for the position of virus/worm to the Microsoft Newsgroup - security - virus.
Through your News Reader:
News://msnews.Microsoft.com/Microsoft.public.Security.virus
Via the Web:
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virusI hope this helps.
[If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
Maybe you are looking for
-
When I turn my iPhone, the image does not rotate. How can I get there
On my previous iPhones, when I turned my iPhone, the screen swivels also - so I could expand your text or a picture. But on my iPhoneSE, it is not - how can I make it work?
-
My thinkpad is about 4 years old, and now the battery is that turned bad. I would like to buy a new one... but... I tried to figure out what battery is suitable for this laptop, but I found batteries for T430... is the same as t430u? Or what battery
-
Create Table Build .xsl
I use Buil Table to print data on the front panel, but I want to know if I can record this data on Excel or something like that, I don't know if I should create the document or modify certain properties on this block, thank you everyone
-
my screen go black for a second or two wy?
"HP Pavilion p6152f desktop computer Product number: NP220AA. For a second or 2, my screen go black don't any changes made before the beginning of the problem and any error messages. Hope I chose the good advice for this problem.
-
Skillbuiders (Session Timeout) plug in question
HelloI have a question wth Skillbuilders "Session Timeout" plugin:Plugin keeps popping up on the page of connection even if the user disconnected from the application.I used conditions in dynamic Action to prevent the plug-in to be included on the lo