SQL logic or missing database error

What is the problem with this statement

INSERT INTO tableName(CID,TITLE)VALUES(1,test)

I get the error "SQL logic error" or missing database

Advertisement

I managed to solve it by using bind

Tags: BlackBerry Developers

Similar Questions

  • Error: PL / SQL: ORA-00922: missing or invalid option

    I'm sorry, I'm new to Oracle and am in a crazy time. I'm having all kinds of problems with the conversion of SQL to Oracle... and get the PL/SQL: ORA-00922: missing or not valid error option with the following function. Any help appreciated.

    FUNCTION IEXGADQReceived)
    v_BDateTime IN DATE
    v_EDateTime IN DATE
    v_Queuename IN VARCHAR2
    v_Username IN VARCHAR2
    )
    RETURN int IS
    INT v_retval;
    BEGIN
    SET v_retval: = (select count (distinct iid)
    Of agentinteractionsview
    WHERE the ibegintime between v_BDateTime and v_EDateTime
    and fromqueue = v_Queuename
    and fromroutereasonid = 11
    and username = v_Username);

    RETURN v_retval;
    END IEXGADQReceived;

    No problem, we've all been there before: D)

    FUNCTION IEXGADQReceived (v_BDateTime IN DATE,v_EDateTime IN DATE,v_Queuename IN VARCHAR2,v_Username IN VARCHAR2)RETURN int ISv_retval INT;BEGINselect count(distinct iid) INTO v_retval FROM agentinteractionsviewWHERE ibegintime between v_BDateTime and v_EDateTimeand fromqueue = v_Queuenameand fromroutereasonid = 11and username = v_Username;
    
    RETURN v_retval;END IEXGADQReceived;
    
  • The missing compiler error output

    I hope it is a simple:

    When I compile a program and there are errors and/or mise put in custody, opens the window output to build, but the error messages are not listed!  All this shows, it is:

    Build status (MyProject.prj - Debug)
    MyModule.c
    Build failed.

    If I click on the button 'Compile' 4 or 5 times in a row, finally the error list appears.  I can't understand any logic for when the error list appears or fails, but eventually we get half a dozen attempts.  I checked all the settings of the compiler and appropriate warnings are activated, etc.  What am I missing?

     


    I use Version 13.0.0 (632)

    Thank you

    YES!  I'm compiling on a network drive.  I've moved the project on the local hard drive and poof, it seems to work fine now.  I'll know for sure after working with her during the day, but I deliberately introduced warning and error conditions, and he reported it correctly.

    Thank you!

    Mike

  • Multisim database error

    I have a problem running Multisim Power Pro version 10.1 (10.1.357). I get the error 'Could not open database.' created with a previous version of your application After clicking on OK, I get a different error message: "access to the database error. Data are not available". The same error message "cannot access the database" appears for databases of the company and the user as well. Once the completed application loading, I can't place the components because of the issue of the database.

    In the top menu bar, if I go to tools->-> Database Manager database, the application crashes and I have to use Windows Task Manager to close. The event log shows that 'database.dll' is the reason why the multisim.exe watered.

    I am running Windows Vista Ultimate SP1 (32-bit) with full administrator rights. I never installed earlier versions of Multisim on this particular computer before. The strange thing is that the program actually worked the first time I installed it, but I started getting errors after windows update ran. Windows Update shows that only my office 2007 applications have been updated.

    I deleted all the files of database 3 and performed a repair of the application using the installation disc, but that has not solved the problem. I also uninstalled multisim and deleted the folder of the ProgramData directory database but it does not work as well

    Furthermore, I am under Labview 8.5 on this same computer and have no problem with him whatsoever.

    Any help is appreciated.

    After sleepless nights and countless debugging I finally solved my problem with Multisim.

    It turned out that the problem lied in the windows registry. Some of the parameters of register in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Jet\4.0\Engines\] and [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Jet\4.0\ISAM Formats] reduced to nothingness.

    The values of Excel, Exchange, jet 2.x jet 3.x, Lotus, Paradox, Test and xBase ISAM Formats were all empty. Fortunately, I have an another Vista PC which I was able to export the missing values to restore the PC problem. Multisim is now underway!

    BTW, one of the jet 3.x registry values contain 'Win32"="C:\Windows\system32\msrd3x40.dll' which was the main reason why Multisim broke. Multisim could not determine msrd3x40.dll is located in the System32 folder after removing the request of UltraLibrian.

  • my computer never ceases to appear damaged or missing database shellmanger how can I solve this problem

    my computer never ceases to appear damaged or missing database shellmanger how can I solve this problem

    Hello
     
    1. where the error occur?
    2. What is the Exact error message that you receive?
    3. What is the operating system installed on the computer?
     
    Perform the clean boot and check if the problem is resolved or not.
     

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Note: perform step 7 to reset the computer to start as usual after the boot process.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Hope that helps.

  • Receiver error message: "database error detected 0x800f081f" and unable to perform Windows updates.

    Original title: windows are not up-to-date

    database error found 0x800f081f do not set windows troubleshooting, that of why system undo the changes, updates are having not installed so what should I do to solve this problem?

    Hi Hassan,.

    Thanks for the updates.

    You tried to perform step 1 and step 2 provided in method 3 to check the issue?

    If you did not do the 3 method, try the steps in the same and check if that helps.

    If the problem persists, you can try the following steps and check.

    Method 1:

    You try to run a SFC scan on the computer that would be a system file corrupt on the computer search and replace.

    Use the System File Checker tool to repair missing or corrupted system files

    Method 2:

    You can run the following DISM command from an elevated command prompt and see if the patch will install after you run the DISM command.

    a. drag from the right edge of the screen and then click on Search.
    b. enter the command prompt in the search box.

    c. in the list of results, drag down on or right click command prompt, and then press or click on run as administrator.
    In the administrator command prompt window, type the following commands. Press ENTER after each command:

    DISM.exe / Online/Cleanup-image /Scanhealth
    DISM.exe / Online/Cleanup-image /Restorehealth

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • 12.2.3 to 12.2.4 adphistUpdatePatchLevel upgrade problem: unexpected database error

    Hi all

    I am upgrading a 12.2.3 EBS installation at 12.24.

    I'm after that document: 1617458.1 , which refers to: applying the last pub and T2K release update Packs for Oracle E-Business Suite version 12.2 (Doc ID 1617461.1).

    The second paper I am way B, and I am at the step 5: phase adoption $ = patch = 18283295, 19581770 = yes fusion

    Now, I get the below error:

    AutoPatch error:

    adphistUpdatePatchLevel: unexpected database error

    AutoPatch error:

    ORA-01654: impossible to extend the index SYS. I_PLSCOPE_SIG_ACTION$ by 1024 in the SYSAUX tablespace

    ORA-06508: PL/SQL: called program unit is not found: 'APPS. FND_PROFILE ".

    ORA-06512: at the 'APPS '. FND_GLOBAL', line 1781

    ORA-06512: at the 'APPS '. FND_GLOBAL', line 2195

    ORA-06512: at the 'APPS '. FND_GLOBAL', line 2652

    ORA-06512: at the 'APPS '. FND_GLOBAL', line 2804

    ORA-06512: at the 'APPS '. FND_GLOBAL', line 2742

    ORA-06512: at the 'APPS '. WF_EVENT', line 3673

    ORA-06512: at the 'APPS '. FND_PROD_LIC_TGR', line 9

    ORA-04088: error during execution of sorting

    Error in adphistUpdatePatchLevel (AD, C.5)

    Error calling adphistUpdateRlseAndPatchLvl().

    Error calling adphistStoreCurPatchHistInDB2

    AutoPatch WARNING:

    Unable to save the history of Patch to database information

    Trying to save APPLTOP instead...

    STOP_TASK: [record the history of Patch to database] [] [Tuesday, November 18, 2014 22:28:08]

    STRT_TASK: [Save Patch history of file system] [] [Tuesday, November 18, 2014 22:28:08]

    Saving the history of Patch to APPL_TOP information...

    AutoPatch error:

    adphistUpdatePatchLevel: unexpected database error

    AutoPatch error:

    ORA-01654: impossible to extend the index SYS. I_PLSCOPE_SIG_ACTION$ by 1024 in the SYSAUX tablespace

    ORA-06508: PL/SQL: called program unit is not found: 'APPS. FND_PROFILE ".

    ORA-06512: at the 'APPS '. FND_GLOBAL', line 1946

    ORA-06512: at the 'APPS '. FND_GLOBAL', line 2195

    ORA-06512: at the 'APPS '. FND_GLOBAL', line 2652

    ORA-06512: at the 'APPS '. FND_GLOBAL', line 2804

    ORA-06512: at the 'APPS '. FND_GLOBAL', line 2742

    ORA-06512: at the 'APPS '. WF_EVENT', line 3673

    ORA-06512: at the 'APPS '. FND_PROD_LIC_TGR', line 9

    ORA-04088: error during execution of sorting

    Error in adphistUpdatePatchLevel (AD, C.5)

    AutoPatch error:

    Error calling adphistUpdateRlseAndPatchLvl().

    Release includes the hash table

    Release fixes hash table

    Hash table freeing basedons

    Releasing entities hash table

    You must check the file

    /U01/Oracle/vis/fs_ne/EBSapps/log/adop/6/apply_20141118_160401/VIS_barcelona/ADOP_MRG_20141118_1416323127/log/u_ad_444100291.log

    to find errors.

    What should I do to fix this?

    I found document 1119734.1 , but I don't know if that's what I should do to fix this problem.

    Thank you.

    When I told to reapply what I actually meant was to continue patch fixing the worker having failed, sorry about that. Failed to read the error message carefully.

    AutoPatch WARNING:

    Unable to save the history of Patch to database information

    Trying to save APPLTOP instead...

    STOP_TASK: [record the history of Patch to database] [] [Tuesday, November 18, 2014 22:28:08]

    STRT_TASK: [Save Patch history of file system] [] [Tuesday, November 18, 2014 22:28:08]

    Saving the history of Patch to APPL_TOP information...

    It seems that the autopatch could complete except load patch on database information

    You can check the log of the hotfix file to know more details.

    If the hotfix information are not uploaded properly he will be transferred to the database the next time you run adoption, please find following excerpt from 12.2 doc.

    How to fix information is stored


    The adoption of utility stores fix information in the database automatically whenever it applied a patch successfully. However, if the patch is not applied successfully, or when you run adoption in pre-installation mode, patch history is not written directly to the database, but instead, is written in these hotfix information files:

    • javaupdates.txt, which contains information about the changes to the Java files
    • adpsv.txt, which contains information about the changes to all files except the files Java

    Note: In the name of the file, hh is in 24-hour format.

    These two files are in the /admin/ directory. Every time that you run adoption, it checks that the existence of the information of the files in the patch directory. If it finds them, it automatically downloads the information contained in the database of the history of patch. If the download is successful, adoption, and then deletes the files in the directory. The adoption of log files if the upload has succeeded or failed.

    Yes, it looks like so...

  • SQL sent to the database in obiee 10g

    Hello

    I can't see the SQL sent to the database in the log file. Ony able of logical query. I connected inwith administrator and checked th eloglevel is 5.

    How can I view the general sql query that was sent to the database.

    Thank you

    Advanced to the prefix tab
    SET VARIABLE DISABLE_CACHE_HIT = 1;

    Or another NQConfig.ini

    The NO value to cache.

    Since it is answered, mark it as correct :)

    Published by: Srini VIEREN on April 26, 2013 10:35

  • Dashboard OBIEE - JavaScript - get the SQL logic

    Hi Experts,

    I have the dashboard with an OBIEE report and dashboard invites. So, whenever I change the values in the prompt lines in the report to amend accordingly. I hope that the sql logic changes also to the selection, I do on the dashboard page.

    I want to take this logical sql update. I knew that we can write the javaScript function in the municipality. JS file and then call this function in the dashboard. But I want to know how I can get the update sql logic.

    Any help or inputs would be appreciated.


    Thanks and greetings
    S

    Hi Siva,

    Sorry about that last post. I did not properly escape all my special characters and the Forum diverted.

    I have corrected the errors and again tested the code. Works fine on IE and Moilla.

    Give it another shot.

    -Joe

  • RMAN-04005: target database error: ORA-01031: insufficient privileges

    Try to duplicate db
    I checked the orapwd file looks ok.

    Oracle: tulpcorpadb03$ rman TARGET sys/***@wcmp AUXILIARY.

    Release of Recovery Manager: 9.2.0.8.0 - 64 bit Production

    Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.

    RMAN-00571: ===========================================================
    RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of the package manager internal collection failed
    RMAN-04005: target database error:
    ORA-01031: insufficient privileges

    I findout, this is prod db and not allowed to bounce to change, any other solution do rman duplicate work without changing it?

    SQL > show parameter password

    VALUE OF TYPE NAME
    -----------
    Remote_login_passwordfile string NONE

    SQL > connect virtue sysdba;
    Connected.
    SQL > select * from v$ pwfile_users;

    no selected line

    The auxiliary node must always have access to the backupset.

  • Access 2003 - repeated "You cannot make changes to the database" error

    Hey all,.

    Im having a very strange problem with Microsoft Access 2003, we work with the old databases and when we open them by Access 2003 we get the message "you cannot make changes to objects in database" error, which is expected. However, the laptop began to repeat this message repeatedly about 8 times after the first time that you click on it. Its very annoying to have to keep clicking to get rid of the error message. Its a very strange problem, any ideas on how to solve this problem, or even explain what could of happened will be appreciated.

    Thanks in advance

    PS Ce is not an option for updating the database, we work with a program that uses a database of 97 old and if you update the database the program will stop working.

    Hello

    First of all it doesn't seem that it is a Toshiba laptop failure.
    This looks more like a problem of Microsoft.
    I recommend to check the articles in the Microsoft Knowledge base or / and contact Microsoft technical support.

    I studied a bit and found these pages. Maybe you will find useful information.

    http://www.smartcomputing.com/editorial/article.asp?article=articles/WebOnly/TechSupport/420w10/20w01.asp&GUID
    http://support.Microsoft.com/kb/824260/
    http://support.Microsoft.com/?scid=kb;en-us;824278&SPID=2509&SID=98

    Good luck

  • Bootmgr missing of error for windows 7 Home Basic

    Salvation;

    I want to restore my laptop to factory setting, because all network drivers are currupted and couldn't fix the laoptop. but I tried to restore to factory setting I'm missing bootmgr error fascing... .i have no any CD bootable...

    Here are the details of my laptop:

    Operating system: Windows 7 Home Basic

    Model laptop: HP pavilion dv6 notebook PC

    The system board ID: 1658

    Processor type: Intel Core i5 - 2430M CPU @2. 40 GHZ

    any help will be appreciated

    concerning

    khalid Khan

    When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

    The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

    Please indicate if the system recovery ran and finished or you were unable still to start the recovery. Depending on the exact cause, you may be able to fix the "bootmgr missing" error using a Windows 7 installation DVD. If you need a disc to Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If you created this disk, you can boot from it and select 'Repair' to try to solve the current problem.

    Select repair your computer. After several screens, you will come to choice. Select command prompt. Type bootrec /RebuildBcd.  Then type Exit

     

    Select "Startup Repair" and let it run. Reboot the laptop.

     

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • While I am trying to install SQL server, I get an error 'install SQL bootsrapper has stopped working ".

    While I am trying to install SQL Server, I get this error message:

    native sql install bootstrapper has stopped working

    Could someone please help me solve this problem?

    I tried both power and windows checked.net 3.5 features even if I do not receive.

    Hello

    Question also need to collect files of dump for further investigation, I would suggest that you open a folder CSS Microsoft (http://support.microsoft.com/). There will be a technical support engineer assigned to analysis the dump files and give you a solution to this problem.

    For information about how to collect SQL Server dump files, see http://support.microsoft.com/kb/917825.

    OR

    Please try now;

    1. access to the option programs and features.
    2. go to the Turn Windows features On or Off function.
    3. turn on all the options within the Microsoft .NET Framework 3.5.1 option.
    4. click OK to apply the updates.
    5. once updated, try again to install.

  • Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

    I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

    I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

    Tips for solving common problems when Windows 7 won't install troubleshooting

    1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
    http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

    2 disable any security software, including anti-virus programs and firewalls.
    3 make sure that your computer has the BIOS and latest drivers.
    4. disconnect all external devices except the keyboard and mouse before installing.
    5. If your computer/motherboard integrated video use and remove the dedicated video card.
    6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
    7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

    8. check your RAM (memory) to find errors. This can take some time.
    (A) Insert the Windows 7 DVD and restart the computer.
    (B) start from the Windows 7 DVD.
    (C) select your language, and then click Next.
    (D) click on "repair your computer" then select the operating system to fix it.
    (E) click on the link of the Memory Diagnostics in the system recovery menu.
    (F) the computer will restart and your memory is checked for errors.

    9 turn off startup programs:
    (A). Click Start, type MSCONFIG in the search box and press ENTER.
    OK the authorization of user account control and password if necessary
    If you are using XP: click Start, run, and type: MSCONFIG and click OK.
    (B) on the general tab, click Selective startup.
    (C) just below the selective startup, clear the checkbox "Load Startup items".
    (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
    (E) click OK, and then restart the computer.
    (F) try the upgrade again.

    (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

    Questions about installing Windows 7?
    FAQ - Frequently Asked Questions from Installation Windows 7 & responses

  • "Backup of database error" message blackBerry Smartphones

    Hello

    I have the version "BOLD" 4.6.0.162 and Desktop Manager version 4.7 working with XP SP3.  In the past, I got my phone from backup.  Until several weeks ago, I am unable to back up my phone and received the message "backup of databases error."  It happens at different stages during the progress of the transfer.

    I followed the suggestions posted by françoys, http://supportforums.blackberry.com/rim/board/message?board.id=Bold&message.id=3676&query.id=57237#M3676, but still no go.

    My questions are:

    1 has any who found the solution yet?

    2. can I still perform the update (System, critical applications software, etc. via Desktop Manager) without losing files data base and music and picture my contact?

    3. is the advanced option in the backup and recovery solution?

    Thank you.

    Ok.  I solved the problem.

    I have 'forward' option of backup and moved the point by point.  There were a few elements indicated errors then I "cleaned" them.  Once all items have been moved, I did regularly back up again.  It worked fine now.

    Hope this might help other who is facing a similar problem.

Maybe you are looking for


HashFlare