SQL to display the results if the number of output is below a limit

Similar Questions

• I want to display the number of success / testing failed in the Testtand of xml report, please help me

  Hi, I want to display the number of success / testing failed in the Testtand of xml report, please help me.

  Later, my requirement is that I should be able to view the number of test / has not passed in the header of the report too.

  I have attached a sequence to give you an idea of how to get the number of results (I don't check it works ), I used 'SequenceFilePostResultListEntry' callback to calculate the number of results.

  and the number of results is passed to the 'ModifyReportHeader' through Globals files, where you can edit the XML file to display in the Repot (follow the link in my previous post).

  Hope this helps

  AshwiN,

• Displays the number of rows in the table displaying a named criteria query data

  I created a test named for my View, called 'Criteria1' and Criteria1 to create a group of ADF with Table query. I want to display the number of rows in result when a search is performed. How can I do?
  
  Thanks in advance,
  Tom

  As mentioned, you can add outputText and you must give OutputText partialTriggers as query component your Id. Thus, when you give a search on the query component, it will refresh the outputText with the number of lines.

  
  ID = "ot1" partialTriggers = "id of the component of motion here" / > ""

• How to display the number of socket in the ListBox UI control?

  I want to display the number of socket in the Listbox control on execution. I use DisplayExpression method, set the entry as '% TestSocketIndex', but it does not work. This methond works fine if I connect the Combobox of UI control to ExecutionViewMgr.ConnectExecutionList.

  Is there a solution

  

  

  Hey wellsc,

  I have looked at this issue and ran into the same issue you described. I dropped the CAR 482840 for a developer study the matter further. Unfortunately, workarounds only I can think immediately would be to use a ComboBox control or to implement the functionality desired by using a native LabVIEW ListBox.

  Let us know if there is something we can do to help, or if you have other questions about how to implement one of the workarounds. You can still use this CAR number to check the status of the issue, as well.

• Z5 no longer displays the number of notifications that I have on each app

  Given that I've updated the marshmallow last night, my Z5 no longer displays the number of notifications that I have on each app :-( Does anyone else have this problem? Notifications will still appear in the notifications bar, but not on the applications themselves (the few).

  I just got some information about this. This is due to the fact that the snippet of code (API) which has been used by applications such as WhatsApp Messenger, to display unread messages, was not official, and is obsolete. The new API is shared among the partners and will require implementation on the side of the partner.

• How to display the number of lines of time giving the values of the columns?

  Hi all
  
  I want to display the number of rows times the value exists in the column num in the query below
  
  
  

  with t AS
     ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL
       UNION ALL
       SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL
       UNION ALL
       SELECT 'krishna' NAME,     'hyd' LOC, 1 NUM FROM DUAL )
    SELECT T.* FROM T
    CONNECT BY ROWNUM <= NUM
  
  
  Expected output:
  
           venkatesh            hyd      2
           venkatesh            hyd        2
           prasad                 hyd        3
           prasad                   hyd      3
           prasad                   hyd      3
           krishna           hyd       1

  Published by: Nag Aswadhati on November 1, 2012 12:34

  Aswadhati NAG wrote:
  Hi all

  I want to display the number of rows times the value exists in the column num in the query below

  Expected output:
  
  venkatesh            hyd      2
  venkatesh            hyd        2
  prasad                 hyd        3
  prasad                   hyd      3
  prasad                   hyd      3
  krishna           hyd       1
  

  With the help of connection by: -.

  with t AS
     ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL
       UNION ALL
       SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL
       UNION ALL
       select 'krishna' name,     'hyd' loc, 1 num from dual )
    select t.name, t.loc
    from t
    connect by level <= num
           and name = prior name
           and (prior sys_guid() is not null);
  
  NAME      LOC
  --------- ---
  krishna   hyd
  prasad    hyd
  prasad    hyd
  prasad    hyd
  venkatesh hyd
  venkatesh hyd 
  
   6 rows selected
  

• SQL to display the Mon - Sun

  I need a SQL to display the Mon - Sun in a week when enter a date. If I give 24 March 2011 "I want Mon - Sun displayed dates IE from March 21, 2011 to March 27, 2011."

  Even if this question is asked a lot times I decided to post this time.

  Next time if you could search the forum it will be very much appreciated.

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  PL/SQL Release 10.2.0.4.0 - Production
  CORE    10.2.0.4.0      Production
  TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production
  
  SQL> alter session set nls_Date_Format = 'DD-MON-YYYY';
  
  Session altered.
  
  SQL> with t
    2  as
    3  (
    4   select next_day(to_date('&Enter_Date','dd.mm.yyyy') - 7, 'SUN') start_date from dual
    5  )
    6  select start_date + level from t
    7  connect by level <= 7
    8  /
  Enter value for enter_date: 24.03.2011
  old   4:  select next_day(to_date('&Enter_Date','dd.mm.yyyy') - 7, 'SUN') start_date from dual
  new   4:  select next_day(to_date('24.03.2011','dd.mm.yyyy') - 7, 'SUN') start_date from dual
  
  START_DATE+
  -----------
  21-MAR-2011
  22-MAR-2011
  23-MAR-2011
  24-MAR-2011
  25-MAR-2011
  26-MAR-2011
  27-MAR-2011
  
  7 rows selected.
  

  Thank you

  REDA

• form table - displays the number of lines using LOV static

  Hello
  
  I have a report in table form, in that I want to display the number of lines.
  For this I created a static LOVfor no lines and transmitted a list of values say 10; 25.50; 10,25 and 50... 1000; 1000
  but my question is that how can I display all the lines in the tabular presentation using the static lov (as having one of the values in LOV like ALL for the number of lines to display).
  
  can someone help me with this.

  1000; 1000... ALL; 9999999999

• How do to display the number of rows Inserted/deleted etc. in PL/SQL

  In Oracle 10 g PL/SQL, I have a delete statement in a stored procedure. This isn't in a cursor. I want to see the number of lines that I deleted. I can use dbms_output.put_line package. I should know this, but I don't have time to perfect syntax. How do I get the number of rows that are deleted and the display via dbms_output.put_lline?

  For example:

  set serveroutput on
  
  begin
  
     delete  dept;
  
     dbms_output.put_line(sql%rowcount);
  
  end;
  /  
  

  Miguel

• BI Publisher - how to display the number of lines displayed at the bottom of the table on each page

  Hello

  We are the conversion reports Actuate BEEP and not able to understand how to view "Accum.Total = < n >" at the bottom of each page. In the attached report to operate it, "Accum.Total = < n >" must be displayed at the bottom of each page where < n > is the number of lines displayed on the current page and previous page.
  
  For example, if there are 10 rows in the result set, if the 1st page displays 4 rows, 2nd page displays 3 rows and 3rd page is 3 lines and then Accum.Total = 4 on page 1, Accum.Total = 7 on page 2 and Accum.Total = 10 on page 3.
  
  Note that we use the property table "allow the lines to break Pages = False" as we do not want a specific line can be split across pages.
  
  I enclose a sample of report actuate, rtf, BEEP and XML report for testing file.
  
  Approach used so far-
  
  1 > I tried to put the counter in the footer, but it seems that only the fields that come directly from the IC can be used on the header/footer. No matter what form text field or variables defined in the report.
  
  2 > I used approach given in the link below. Using this approach, I am able to view a coded value hard at the bottom of every page (just below the table) but his does not work for the variable (in my case the counter c1).
  
  https://blogs.oracle.com/xmlpublisher/entry/continued
  
  3 > on Google, I found a few articles on the page break conditionally as display only certain numbers on a page or the page by section break but in our case, its dynamics and its number of lines to display on a page is driven by data, so I could not think of a certain condition to use in "Condition." ": If" for use as a page break.
  
  Thank you

  Richa
  

  Watch see the-Report

  http://docs.Oracle.com/CD/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#do_bf_cf

  Download the https://blogs.oracle.com/xmlpublisher/entry/continued sample

  Add

  <>

  name = "contd_footer".

  format = "99G999G999" / >

  After the field "Footer."

  If need to use a footer to display the meter then and sous-modèle with code above and call it in footer

• PowerCLI script to display the number of vCPU by VMhost use

  Hi all

  I'm looking to get help here with powerCLI script to list each total number of ESXi vCPU host that is used to determine if there are any ESXi host CPU is more engaged.

  According to suggestion of performance in some blog vExpert, is around 1: 3 of Jepp core ratio: vCPU allocated, then how to display the report with the powerCLI for something like this:

  PRODESXi01
  Total of nuclei available: 32
  Used by the virtual machine: 28

  PRODESXi02
  Total of nuclei available: 32
  Used by the virtual machine: 38

  So according to the result above, the PRODESXi02 is more committed by 6vCPU allocated to the virtual machine.

  Note: The available total carrots is taken from the value of logical processors from the contents tab, when you click on the vSphere console.

  How to get this report using PowerCLI?

  Thank you

  You mean something like this?

  {Foreach ($esx in Get-VMHost)

  $vCPU = get-VM-location $esx | Measure-object-property NumCpu-sum | Select - ExpandProperty sum

  $esx | Select Name,@{N='pCPU'; E={$_. NumCpu}},

  @{N = 'vCPU'; E = {$vCPU}},

  @{N = "Ratio"; E = {[math]: Round ($vCPU / $_.)} (NumCpu, 1)}}

  }

• Display the number of lines based on a line selector

  Hello
  
  
  We have a form on an sql query. We are currently showing 100 lines per page. We would like to have a line selector, so the number of lines displayed on the page depends on the value selected in the line selector. I'm not sure how this is possible.
  
  Thanks in advance,

  Hello

  It is relatively easy to set up - see: [http://apex.oracle.com/pls/otn/f?p=267:111]

  There are 4 steps to create this feature:

  1. create a "select list with Submit" on your page called, say, P111_ROWS. The source of the list value:

  STATIC2:10;10,20;20,50;50,100;100,200;200,500;500,1000;1000,All;1000000
  

  (Of course, you can change these values according to your needs)

  Display Set Null and display additional values to no.

  2 create a calculation on your page that defines the new element value static assignment of, say, 10. This calculation should depend on the element is null (this simply sets a default initial value)

  3. create a branch of page that links to the same page and check the option reset Pagination

  4. on attributes of the region of your report, enter the name of your new item in the parameter 'Number of lines (element)' - I also clear the value in the parameter 'Number of Rows.

  This should be it!

  Andy

• Peuvent Contacts displays the number of contacts?

  Other address books displays the total number of contacts and the number of contacts in the current group of visualization. Is there a way for Contacts in El Capitan, to do the same.

  I just scroll to the bottom of the list. However, for small lists, it doesn't show the number of cards. I don't know the required number to show.

• is it possible to display the number of elements in the array before you run?

  Hello

  At runtime, I can use the size of array function to check the number of items in a table. But it is possible to display the size of the array in edit mode (i.e. before turn the vi)? Thank you.

  dragondriver wrote:

  The table contains for some culster complicated. Yes, you are right, to help to see the last item will give an idea. But what I want is that anyway to show an indicator on the Panel before showing the dimension when the user changes the size on the fly.

  You can implement the whole thing (indicator of control and the size of array) as a X-control. They are fully operational in edit mode.

  I still don't quite see what you're trying to do? Why would it matter what happens in edit mode? A finalized VI must always be runnning during use. Use a state machine architecture.

• SQL to count the number of days of January with a range of dates

  I have data like this, how to calculate the number of days with January in this date range.

  BEGINNING	END	DAYS OF JAN
  12/12/2013	20/01/2014	20
  21/01/2014	02/02/2014	11

  Hello

  So, you want to count the number of days between

  (a) either start_dt, or January 1, 2014 (prevailing later) and

  (b) or end_dt or January 31, 2014 (whichever comes first).

  However, if start_dt and end_dt are prior to January 2014 (or both are later) which will result in a number negative if you take the difference or 0, if it is higher.

  This looks like a job for the GREATER and LESS than functions.

  SELECT start_dt - START is not a column name good

  , end_dt - is neither END

  BIGGER (1 + LESS (end_dt, DATE ' 2014-01-31'))

  -Most GREAT (start_dt, DATE '' 2014-01-01)

  * v

  ) AS jan_days

  FROM table_x

  ;

  If you would care to post CREATE TABLE and INSERT instructions for some examples of data, then I could test it.