SQLite3.dll

I have an ACER ASPIRE 5410 32 bit operating system, when I start windows I get an error named BackupManagerTray.exe - box cannot locate component

This application has failed to start because sqlite3.dll is not found. Reinstalling the application may fix this problem.

Please can you advise on the resolution of this problem.

Hello dejoiedelphine,

What operating system do you currently use and service pack?  How long were you raise this error message when starting?   Sqlite3.dll errors are caused by situations that lead to the removal or corruption of the sqlite3 DLL file.  In some cases, sqlite3.dll errors might indicate a problem of registry, a virus or malware issue or even a hardware failure.

Do you have uninstalled/installed any new programs/software recently?  What software antivirus you are currently using and what was your last completed full scan?  Do you use a malware/spyware software removal?   I would first start by making a scan to see if any threats are detected, and let us know as possible additional information.

Microsoft safety scanner

The malware removal:

http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning/malware/d27363e9-BE5D-4f58-AF70-ac3500fd2934

Please let us know status.

Thank you

James

Tags: Windows

Similar Questions

  • What should I do to remove it bchelper.exe or replace sqlite3.dll

    What to do to remove it bchelper.exe or replace sqlite3.dll. The system does not boot under any installer

    Hello

    1. What is the exact error message received when the problem occurs?

    2 do you want to remove bchelper.exe or replace sqlite3.dll because the system does not boot under any installer?

    3. what operating system is installed on the computer?

    Method 1:

    I recommend you perform the clean boot.

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as shown in step 7 of the foregoing provide KB article.

    Method 2:

    Try the SFC (System File Checker) scan on the computer.

    SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

    Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

    Reference:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Let us know if it helps!

  • How to fix sqlite3.dll erorr

    Original title: How do I solve this problem? Windows xp sp3 32 bit OS showed sqlite3.dll erorr.

    How to solve this problem? Windows xp SP3 32 bit OS showed erorr sqlite3.dll.

    Hello

    1. were there any changes (hardware or software) to the computer before the show?

    2. When you receive this error message?

    Follow the steps.

    Method 1: You can perform a clean boot that allows to check if startup item or services to third-party application is causing a problem.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353
    Please note: after troubleshooting, make sure you start the computer to a normal startup mode.

    Method 2:
    A few sqlite3.dll errors may be related to a virus or other infections of malware on the computer. You can run a Microsoft security scanner to make sure that the computer is free of infections:

    Microsoft safety scanner

    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note: Before you perform security analysis, make a backup of important data.

  • How do we install windows xp sqlite3.dll

    How to re - install sqlite3.dll I tried several times but has no I'm on windows xp

    George.

    Hello

    1. what program you install?

    2. What is the exact error message?

    3. when exactly you get this error message?

    4. you install a SQlite program?

    Answer for you help the better.

    SQLite3.dll means SQLite, a lightweight SQL database engine.

    SQLite is used by several popular software.

    You can also view the article mentioned below:

    Suggestions for a question on the help forums

    http://support.Microsoft.com/kb/555375

  • Whenever I turn on my computer, I get "Sqlite3.dll is not found."

    Original title: "Sqlite3.dll is not found."

    Whenever I turn on the computer. Once the desktop screen .it's a message "this application has failed to start because sqlite3.dll is not found. reinstalling the application may fix this problem".but the computer still can run that I don't know what was wrong and how can I fix this please?

    I'm not leaving your system works in selective startup mode, because that would leave you with a sloppy XP configuration.

    You must find the faulty startup item and get rid of it.

    Here's how:

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:

    No matter what you use for malware protection, follow these steps:

    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.

    In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

    Restart your computer and solve the outstanding issues.
  • Error message: the procedure entry point sqlite3_wal_checkpoint could not be found in the librayr of Hotlinks SQLite3.dll.

    Original title: IApple synchronize notifier.exe - not found entry point

    I typed a mistake in my first question.  Here he again the question.

    The procedure entry point sqlite3_wal_checkpoint be found in the librayr of Hotlinks SQLite3.dll.

    I called Apple, but they checked my computer and cannot find any problems with the above, but he always comes back.

    Hello

    1. when exactly you receive this error message?

    2. did you of recent changes on the system?

    Method 1:

    Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

    Note: check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

    Method 2:

    You can try to uninstall and reinstall everything produced Apple installed on the system and check if this may help:

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • IncrediMail could not start, error Code 0 x 80040154 also sqlite3.dll missing.

    Using Vista Home Premium, tried reinstalling IncrediMail after getting the message unable to locate component. This application has failed to start because sqlite3.dll is not found.  Downloaded 'FixIt' but it does not work with error Code: 0 x 80040154 appearing. IncrediMail will not reload now that the sqlite3.dll is missing.

    Suzie

    Try the following links

    http://help.IncrediMail.com/English/help/IM/uninstall_incredimail.html

    Support

    http://www.IncrediMail.com/English/help/support.aspx

  • In Vista, we get an error sqlite3.dll is missing

    I get a message that says something like, "sqlite3.dll. file is missing or does not start...  There is also called 'splite3_wal_checkpoint '.

    How can I fix this problem so that I no longer have this message?

    Thank you

    Hi Timothy JPreston,

    1. when exactly you receive this error?

    2. did you of recent changes on the system?

    You can try to perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

    Hope this information is useful.

  • How to fix Sqlite3.dll not found or missing errors?

    How to fix Sqlite3.dll not found or missing errors?

    Hello

    1. were there any changes (hardware or software) to the computer before the show?

    2. When you receive this error message?

    Follow the steps mentioned below and check if that helps.
    Method 1:
    You can perform a clean boot that allows to check if startup item or services to third-party application is causing a problem.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Please note: after troubleshooting, be sure to start your computer in normal mode.

    Method 2:
    A few sqlite3.dll errors may be related to a virus or other infections of malware on the computer that has damaged the DLL file. Alternatively, you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note:  Before you perform security analysis, make a backup of important data.

  • SQLite3.dll error every time I start my computer...

    I have Windows 7 and I get this message every time I start my computer...

    The program cannot start because sqlite3.dll is missing on your computer. Try reinstalling the program to fix the problem.

    How can I get rid of him?

    SQLite3.dll means SQLite, a lightweight SQL database engine.

    SQLite is used by several popular software - and I think some software need to use SQlite is installed on your computer and is set to start when the system starts.

    Press the Windows key + R, type in msconfig and press the Enter key. Select the tab "start". Now, uncheck an entry, click OK and restart your computer. If you still receive the error message, open msconfig again, check the entry you previously unchecked and uncheck another entry, click OK and restart.

    Continue to do so until you discover unchecking what entry causes the sqlite3.dll lack error disappears. Post here some details on this boot entry.

    Furthermore, according to the http://sqlite.org/mostdeployed.html McAfee products using SQLite. If your computer came with preinstalled McAfee and you uninstalled, it is possible that some parts of it were left after uninstalling. Try using the McAfee removal tool , and then restart your computer. If you are currently using any McAfee product and face problems with components such as the antivirus, try using McAfee Removal Tool, and then reinstall McAfee product.

  • SQLite3-wal-point control cannot be in SQlite3.dll library message appears at startup with windows 7 starter 32-bit system.

    SQLite3-wal-point control cannot be in SQlite3.dll library message appears at startup with windows 7 starter 32-bit system.

    Don't worry about this - I fixed it by following the steps below...

    Thanks anyway! :-)

    1. Temporarily close the anti-virus software and firewall
    2. Open the control panel configuration, programs and features or Add (and remove programs) and go to the section uninstalling
    3. Remove all Apple products in this order - iTunes, Quicktime, Apple Software Update, Apple Mobile Device Support, Hello, Apple Application Support.  You don't need to remove Safari
    4. Restart the computer
    5. Go to Apple.com and download the latest version of iTunes
    6. Re-install
  • The "procedure entry point sqlite3_prepare_v2 could not be found in the dynamic link library sqlite3.dll.

    I try to run Rosetta Stone software, however whenever I click on the application link (or shortcut) this annoying message keeps popping up that, according to the "procedure entry point sqlite3_prepare_v2 could not be found in the dynamic link library sqlite3.dll. I studied this before, and there seems to be a problem with Apple/iTunes. But when I deleted iTunes, this question always arises. If there is someone out there or in the it Department which can be useful with this question please help!

    Thank you in advance!

    Hello

    1. are you able to launch the program?

    2. What is the version of iTunes installed on your computer?

    Please follow the methods.

    Method 1:

    Run the Microsoft fixit to uninstall iTunes and check.

    See the link.

    http://support.Microsoft.com/mats/program_install_and_uninstall/

    Method 2:

    Copy the file in the Common Files\Apple\Apple Application Support folder in the Common Apple Mobile Device Support folder and check if it works very well.

  • SQLite3.dll problem to solve!

    I deleted my computer sqlite3.dll. It's runninig on windows 7, 64 bit. Whenever I start my computer, a message appears saying; I can't start the program because sqlite3.dll is missing on your computer. You can solve the problem by installing the program once more. What should I do? Can someone help me please?

    Hi L.Vogels,

    1. How did you remove sqlite3.dll?

    2. have you deleted recent programs?

    SQLite is used by many popular software and some software to use SQlite is installed on your computer and is set to start when the system starts. SQLite3.dll means SQLite, a lightweight SQL database engine

    The boot record and find the program that causes this problem. After finding the program, uninstall and reinstall the program to fix the problem.

     

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

    http://support.Microsoft.com/kb/929135

    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup.

    Uninstall or change a program

    http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

    If the problem persists, or if you have any other concerns, post your reply with the result. We are happy to help you!

  • The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic library SQlite3.dll

    Hello

    My computer shows the message above to start...

    Pleaseadvise I must dotorectify the error...

    SQlite is not a Microsoft program.

    It is used by other programs such as Firefox and iTunes.

    You should be able to determine which program is causing the error by disabling the Start Up items unit you no longer receive the message. Use WIndows Defender to disable start-up programs: http://windows.microsoft.com/en-US/windows-vista/Stop-a-program-from-running-automatically-when-Windows-starts

    If your antivirus to stop Windows Defender running, proceed to step 4 of this article: http://support.microsoft.com/kb/929135

    The most likely explanation is a program from Apple. This thread can give you the solution:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/SQLite3-Wal-checkpoint-can-not-be-located-in/8b31c2b3-67cb-440C-B39B-4792c77c7eea?msgId=976f379e-f6ab-474B-b6bd-df7fdea0341f

  • The error that says "this application has failed to start because sqlite3.dll (also sqlite3.prepare.v2) was not found. Reinstalling the application may fix this problem.

    These messages appear, one after another, at startup.

    Something you have running at Windows startup that uses SQLite is a failure. Find out what this program is (so you can stop it) by managing your Startup:

    Start > run > msconfig [Enter]

    This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

    Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

    How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
    The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

Maybe you are looking for

  • Corrupted files

    I forced my mac stopped during shutdown of the files from moving to another folder... I opened the mac again to find that all the files are 0 bytes and fainted and when I try to open them it says I can't because they are used by the os x

  • Why do I see the files on my iPhone that do not appear on my MacBook iCloud drive?

    the iCloud Drive on my MacBook has several folders that do not appear on my iPhone 6. I have the latest OS updates for both. Only GarageBand, Pages, and TextEdit files do not appear on the iPhone, but there are records Preview, Numbers, and Keynote,

  • Re: Satellite Pro L500-196: what drivers for Windows XP

    Hi all! I just bought a satellite Pro L500-196 that comes with installed Windows7. However for the use of the older software I need for my work, I want to install Windows XP from my old laptop.I want to configure a dual-boot environment, so I use Win

  • Using c# to check if the main report contains a sub report in the Crystal Reports Viewer

    Hello I currently have a web form application, which displays a crystal report already created using the crystal reports Viewer. In this report, the format is a few pages of the main report, followed by a few pages of the report of void. However, whe

  • How can I get photoshop 12 elements to stop the update?

    Photoshop elements 12 updates and random moments, it takes 30 minutes and I cannot perform any other task until its done. I would have preferred it asks me if I want to update and gives me the option to know when its done.