sr5717uk power

Hi guys, I want to update a SR5715UK system with a better video card. I opted for the card (Nvidia GeForce 9400 GT with 1 GB ram) but I need to know what size power supply works with these systems... the map requires 450 w that minimum, any body got no idea what power is installed?

Thank you very much

Glenn

You will need at least a 450 watts that your system has about 300 watts.

Tags: HP Desktops

Similar Questions

  • My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

    My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

    Hello brooksm549,
    Thank you for using communities of Apple Support.

    I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

    On the use of the battery on your iPhone, iPad and iPod touch

    When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

    Maximize the life of the battery and battery life

    Best regards.

  • [Power Mac G5] Type of liquid cooling system?

    Y at - it anyway how to determine type of LCS just by looking at the case?

    We have old school Power Mac G5 DP 2, 7GHz (early 2005) we use for editing (well, for the last two years, he's right there and no one wants to touch this old piece of...). They will throw him in the year, and since I was take care of him for a while, I thought I'd take home when they do and use it as a backup machine for the data of my and my wife. I would like the max memory, put a few large hard drives (and small SSD, but there seems to be a lot of problems with this) and run the Linux command (more problems).

    But first, I have to clean the machine and look at the State of it. What particularly concerns me is the LCS (DP 2, 7GHz I) - these things have been prone to leaks and what I found there are at least three revisions of the LCS - second of them made by Panasonic seems to be the most reliable. I can't look inside, deeply, because it must be ready to use at least for another 3-4 months, I can do is to open the case and remove the front fan and look outside the heater.

    So this brings me to my question: Y at - it anyway to determine the type of LCS just by looking at the case?

    Thank you...

    Apparently, there were two models more prone to leaks than others, although still very rare. See this http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-liquid-cooling-infos-fuites-issues.html

    The damage inflicted by a system of flight are very serious, and it is almost impossible to hide or completely clean. As soon as you open the side panel on the Power Mac, you will easily be able to tell if this unit experianced a problem.

  • Exceptional activities related to power

    After that 5-6 years my MacBook battery needs service, classified as a replacement of the battery, but until I get my new battery... Please help me this is my only machine for everything I do. Recently, I see unusual activity on my MacBook, which associated powers and may be the charger cable, for example today when I connect the charger, the led light with a delay also after a few movements on cable!

    When LED on, after a few minutes, 35% collected on the status, LED changed to green and status of load emissions MacBook: 37% charged battery, then return to the normal load State!

    It is only linked to the battery mode or should I concerned about port and MagSafe charger cable? I have fixed my cable charger broken 7-8 months ago and it has worked very well.

    Thank you

    Kind regards

    Hey there alpha120,

    I understand that you are experiencing some problems with the power of your MacBook. While it looks like a spare battery is a good option for this behavior, you can also try a SMC reset:

    Reset the management system (SCM) controller on your Mac - Apple Support

    Thank you for coming to Apple Support communities, let us know if we can be of further assistance.

    See you soon.

  • Activate App stuck on waiting and power Mode low does ' t

    Hi all

    I have at least two concurrent problems with my iPhone 6 + iOS 10.0.2 (but started with iOS 9).

    I can't install new application directly from the App Store on the phone because they were stuck in the phase of "pending". Same behavior of update of the applications that are already installed.

    The only way to update/install the app's iTunes download and synchronize.

    The other simultaneous problem is in what regards the activation of "low power mode" with the rocker switch (settings > farm > Low Power). Whenever I try to activate (manual or automatic 20% of battery) function, the gray toggle becoming in the Middle, then return to the OFF position.

    I already have backupped & restored several times, but nothing has changed.

    How can I solve this?

    Thank your

    Best regards

    Hello Axoduss,

    Thanks for posting in the communities of Support from Apple. I see that you have two problems. One is that the low power Mode is not activated, and the other is that updates and new applications are blocked pending. I know that I rely on my iPhone for everything. It is important to ensure that it works as expected. I'll be more than happy to help.

    Great job to the backup of your phone and restore. It's a great way to help solve these issues.

    If you are restoring from a backup, the problem may be in the back upward. I recommend to reset the phone to factory settings and set up like new to see if the Mode low power and installing apps works. If this does not work after the installation in the new and not after the restoration then you want to restore your data manually and not market back. Here is an article on setting up the phone as new:

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

    Let us know if that helps.

    Take care!

  • I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

    I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

    I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

    There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

    Hey AmnonMikeCohen,

    Thank you for being a part of the communities of Apple Support.

    I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

    Reset the management system (SCM) controller on your Mac.

    How to reset the NVRAM on your Mac.

    See you soon.

  • Power point

    Is there an outlet, especially for iMac computers or do you have to buy a Microsoft Power Point program which is compatible?

    Yes, there is a PowerPoint for Mac available from Microsoft.

  • There's the iPhone battery chargers 5 that use no electricity.  For use in a power failure.

    There's the iPhone battery chargers 5 that use no electricity.  For use during a power failure.

    Your best bet is an accumulator.  I have one I got on Amazon by EC Tech.  It is a brick, but it will charge my iPhone and the iPad, if the current is cut off.  You just need to load the brick and keep it in an emergency.

  • Watch OS shows 3 past mode of power with almost total of battery reserve

    Hello world

    I have a problem since I updated my watch to watch OS 3. Watch (series 1) goes into unexpected battery power with an almost total reserve mode. It produces one or two times a day and the only thing that I recognize that the watch remains black when I look at my wrist. It shows only the time in green numbers when I press a button and I need to reboot by pressing the two buttons. After the reboot, the watch displays + 80 or even 90 + % battery life and it works as expected for the rest of the day (if is not the same problem from happening again). Especially my battery is 50 + % at the end of the day.

    Today I reset the watch and recovered from backup, but that changed nothing. The watch went to the mode of power with a range of 78% a few minutes ago

    I am really frustrated because it happens very often and I could not find a solution to this problem. Decommissioning watch OS 2 is not an option...

    Thanks in advance for your help, I am really stuck on this issue.

    Best regards from Germany,

    Matthias

    Hi, Matthias

    If your dial of the Watch includes the complication of the battery, it is possible that accidental screen interactions are causing your issue.

    Tapping on the complication battery indicates the level of battery with a large button to put the watch mode of power reserve.

    You can consider using your watch for a while without this complication on the face of the watch to see if the issue is recurring:

    Change the face of the watch on your Apple Watch - Apple Support

  • iPad power Switcj

    On my iPad, the power as well as the blow of unlocking button do not work. How can I solve this problem?

    Take it to Apple for a free estimate, or call them and arrange for express service. It cannot resolve hardware problems yourself. You will need to get a replacement from Apple. Apple does not repair the individual components like that, they replace the whole device with a service unit. If you are in warranty and parts failures were due to a manufacturing defect, it would be free. If out of warranty or if the failures were due to accidental damage or misuse, the elimination of guarantee fees apply.

    iPad repair - official Apple Support

  • Power cord for my iMac has crunched, how do I get a new one?

    What I do my power cord for my iMac has been chewed and I don't know if I can claim the title of the guarantee or if I should just buy a new...

    As I can use it only if I put in some way and cannot be pulled.

    If the plug of your end iMac has this form:

    Then the power cord to any standard computer work.  It may not be

    White enough with the beautiful fitting molded but it will work.

  • no available power source battery

    my battery in the form x lounge, I connect to the power supply cord

    but the power supply continues to display battery

    already reset smc, just update macos what to do next? Thanks for help

    You can choose to wait until your computer is open to the public

    and diagnostic tests performed, if this issue does not affect

    any software update or upgrade; because the device must be

    provided with a steady current while the software is installed. In particular

    with the Mac App Store and if you use a wi - fi connection to access the internet.

    Usually the SMC or system management controller, if reset in one

    effectively, should also be a reset of power management,

    If the process is not successful, there may be other problems in

    the charging circuit which will have an impact on the whole Mac.

    https://www.Google.com/search?q=magsafe + dc-in + Council + alternative + MacBookAir +

    One of the elements which can manifest a strange behavior is whether or

    When the "MagSafe DC-in Board" has become defective. It can

    show no battery and always run the Mac. It may also fail totally in

    a way without notice; that can't end well if use it right now.

    Visit a regular on an Apple store with genius, or an authorized

    Apple's Service provider is recommended; to get a practice notice

    and certain diagnoses. They also estimate repair costs.

    • Laptops Apple: Troubleshooting MagSafe adapters - Apple Support

    • About batteries for laptops Mac - Apple Support

    Are the points of contact in the clean and free MagSafe connectors

    debris? -Which can cause the partial connection or errors here.

    Hard to say most likely probable cause of this problem. Maybe the material.

    Check out the details between the bandages. Recommend: technical diagnosis.

    Good luck in this case!

  • Indicator light power cord

    That means the light orange on the power cord?

    Support actively at a high rate.

  • Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

    Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

    MacBook, 2010, Mac OS X 10.6.8

    Hi Veronica Steward,.

    I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:

    If your Mac will not turn on - Apple Support

    Let us know how it goes and thanks for coming to Apple Support communities.

    See you soon.

  • macOS Sierra - press and hold the power button to enter the mode 'sleep'

    I recently updated my MacBook Air (13 inch, early 2015) model of El Capitan macOS Sierra 10.12. Before the update, hold down the power button / stop for 2-3 seconds, put the machine in standby mode. It does not properly after the update. Release the power button to switch to sleep mode works only once after each time you start the machine.

    I know he has an option to set the mode of sleep using Ctrl + button / stop and by selecting one of three options to restart, sleep and Shutdown, but who needs 3 more click click and is not fast. Also, independently of any application that is open, pressing the button walk / stop worked fine before the update, but now I need to be on the desktop even do Ctrl + Power button work.

    All patches available for it? Miss me the old way of put my Mac to sleep I do not remember if I did some tweak in my Mac, or was it a default feature...

    Greetings jainam2209,

    Thank you for using communities of Apple Support. It seems you want to put the Mac to sleep, but it does not always work.
    I would recommend read you these articles, the first article explains the ways that macOS Sierra is supposed to go to sleep.
    The second article can help if the computer won't sleep when you're trying to sleep.

    macOS Sierra: put your Mac to sleep

    macOS Sierra: If your Mac won't go or stay asleep

    Take care.

Maybe you are looking for

  • contacts does not after be entered manually

    My contact list does not display the new contacts I have manually enter. Any help?

  • GPU computing with ATI Radeon

    Hello Is it possible to use the analysis tools of LabView GPU with GPU Nvidia? All the information I find, does not or is old enough (~ 5 years, I'm sure that Nvidia was the only option). So basically, I'm wondering if, now, it is possible to use dif

  • Fable 1 (the lost chapters) disk missing 1

    I own fable the lost chapters and you want to play, I found in my garage and I wanted to play again. However, it seems to be missing disk 1, I 2-4 drives and the activation key. I would be very happy if you could tell me what to do to play fable 1. T

  • Windows 7 - Windows Media Player encountered a problem while playing the file.

    WMP worked fine one day and then the other, it will not play any type of file.  I just get the error message "Windows Media Player encountered a problem while playing the file." with each trying to play any type of file.  It won't play video or audio

  • 'Open in browser' and 'Share' problem

    Hi all Working on my first application. I'm done for the most part, but I can't for the life of figure me out how to get the invocations of work. The application load an arbitrary URL, found in the detailView.url variable in a WebView. It works very