SRA 4600 - users to limit who can connect to the VPN

Similar Questions

• What is the proper way to create a user who can connect through the Console, but not through the VMWare Client?

  I did the following steps:

  1. create a user

  2. assign the Group root (remove all the other group of the user)

  What's my not just?

  Thank you!

  It is the way to do it.   Either you must be part of the root group to be given to the role admin (or a bespoke) at the level of the host to access the DCUI.

  If you create a user is added to the root group, but is assigned all permissions (either singularly or through a group) on the host then, then the user will be able to connect to the DCUI but not the client vSphere (or any other method of the API).

• How user by VM (XP) can connect at the same time?

  Hello guys,.

  We test VMware View 4 and so far work fine, but I have a question? How many user by VM can connect at the same time? I test with 2 VM (XP) in the pool, but I want to use more than 2 users, but when I try to login doesn't say "no resources available", what that means is that a single user by VM? Us who is running Terminal Server and try to find alternatives.

  Thank you

  It's the same as with a XP machine. 1 single user can connect at the same time.

  André

• Cisco ASA 5510 - Cisco Client can connect to the VPN but cannot Ping!

  Hello

  I have an ASA 5510 with the configuration below. I have configure the ASA as vpn server for remote access with cisco vpn client, now my problem is that I can connect but I can not ping.

  Config

  ciscoasa # sh run

  : Saved

  :

  ASA Version 8.0 (3)

  !

  ciscoasa hostname

  activate the 5QB4svsHoIHxXpF password / encrypted

  names of

  xxx.xxx.xxx.xxx SAP_router_IP_on_SAP name

  xxx.xxx.xxx.xxx ISA_Server_second_external_IP name

  xxx.xxx.xxx.xxx name Mail_Server

  xxx.xxx.xxx.xxx IncomingIP name

  xxx.xxx.xxx.xxx SAP name

  xxx.xxx.xxx.xxx Web server name

  xxx.xxx.xxx.xxx cms_eservices_projects_sharepointold name

  isa_server_outside name 192.168.2.2

  !

  interface Ethernet0/0

  nameif outside

  security-level 0

  address IP IncomingIP 255.255.255.248

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 192.168.2.1 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 192.168.1.253 255.255.255.0

  management only

  !

  passwd 123

  passive FTP mode

  clock timezone IS 2

  clock summer-time EEDT recurring last Sun Mar 03:00 last Sun Oct 04:00

  TCP_8081 tcp service object-group

  EQ port 8081 object

  DM_INLINE_TCP_1 tcp service object-group

  EQ port 3389 object

  port-object eq ftp

  port-object eq www

  EQ object of the https port

  EQ smtp port object

  EQ Port pop3 object

  port-object eq 3200

  port-object eq 3300

  port-object eq 3600

  port-object eq 3299

  port-object eq 3390

  EQ port 50000 object

  port-object eq 3396

  port-object eq 3397

  port-object eq 3398

  port-object eq imap4

  EQ port 587 object

  port-object eq 993

  port-object eq 8000

  EQ port 8443 object

  port-object eq telnet

  port-object eq 3901

  purpose of group TCP_8081

  EQ port 1433 object

  port-object eq 3391

  port-object eq 3399

  EQ object of port 8080

  EQ port 3128 object

  port-object eq 3900

  port-object eq 3902

  port-object eq 7777

  port-object eq 3392

  port-object eq 3393

  port-object eq 3394

  Equalizer object port 3395

  port-object eq 92

  port-object eq 91

  port-object eq 3206

  port-object eq 8001

  EQ port 8181 object

  object-port 7778 eq

  port-object eq 8180

  port-object 22222 eq

  port-object eq 11001

  port-object eq 11002

  port-object eq 1555

  port-object eq 2223

  port-object eq 2224

  object-group service RDP - tcp

  EQ port 3389 object

  3901 tcp service object-group

  3901 description

  port-object eq 3901

  object-group service tcp 50000

  50000 description

  EQ port 50000 object

  Enable_Transparent_Tunneling_UDP udp service object-group

  port-object eq 4500

  access-list connection to SAP Note inside_access_in

  inside_access_in to access extended list ip 192.168.2.0 allow 255.255.255.0 host SAP_router_IP_on_SAP

  access-list inside_access_in note outgoing VPN - PPTP

  inside_access_in list extended access permitted tcp 192.168.2.0 255.255.255.0 any eq pptp

  access-list inside_access_in note outgoing VPN - GRE

  inside_access_in list extended access allow accord 192.168.2.0 255.255.255.0 any

  Comment from inside_access_in-list of access VPN - GRE

  inside_access_in list extended access will permit a full

  access-list inside_access_in note outgoing VPN - Client IKE

  inside_access_in list extended access permitted udp 192.168.2.0 255.255.255.0 any isakmp eq

  Comment of access outgoing VPN - IPSecNAT - inside_access_in-list T

  inside_access_in list extended access permitted udp 192.168.2.0 255.255.255.0 any eq 4500

  Note to inside_access_in of outgoing DNS list access

  inside_access_in list extended access udp allowed any any eq field

  Note to inside_access_in of outgoing DNS list access

  inside_access_in list extended access permit tcp any any eq field

  Note to inside_access_in to access list carried forward Ports

  inside_access_in list extended access permitted tcp 192.168.2.0 255.255.255.0 any DM_INLINE_TCP_1 object-group

  access extensive list ip 172.16.1.0 inside_access_in allow 255.255.255.0 any

  outside_access_in of access allowed any ip an extended list

  outside_access_in list extended access permit tcp any any eq pptp

  outside_access_in list extended access will permit a full

  outside_access_in list extended access allowed grateful if any host Mail_Server

  outside_access_in list extended access permit tcp any host Mail_Server eq pptp

  outside_access_in list extended access allow esp a whole

  outside_access_in ah allowed extended access list a whole

  outside_access_in list extended access udp allowed any any eq isakmp

  outside_access_in list of permitted udp access all all Enable_Transparent_Tunneling_UDP object-group

  list of access allowed standard VPN 192.168.2.0 255.255.255.0

  corp_vpn to access extended list ip 192.168.2.0 allow 255.255.255.0 172.16.1.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  management of MTU 1500

  pool POOL 172.16.1.10 - 172.16.1.20 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 603.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  Global (outside) 2 Mail_Server netmask 255.0.0.0

  Global 1 interface (outside)

  Global interface (2 inside)

  NAT (inside) 0-list of access corp_vpn

  NAT (inside) 1 0.0.0.0 0.0.0.0

  static (inside, outside) tcp Mail_Server 8001 8001 ISA_Server_second_external_IP netmask 255.255.255.255

  static (inside, outside) tcp Mail_Server 8000 ISA_Server_second_external_IP 8000 netmask 255.255.255.255

  static (inside, outside) tcp Mail_Server pptp pptp netmask 255.255.255.255 isa_server_outside

  public static tcp (indoor, outdoor) Mail_Server smtp smtp isa_server_outside mask 255.255.255.255 subnet

  static (inside, outside) tcp 587 Mail_Server isa_server_outside 587 netmask 255.255.255.255

  static (inside, outside) tcp Mail_Server 9444 isa_server_outside 9444 netmask 255.255.255.255

  static (inside, outside) tcp 9443 Mail_Server 9443 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) tcp 3389 3389 netmask 255.255.255.255 isa_server_outside Mail_Server

  static (inside, outside) tcp 3390 Mail_Server 3390 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) tcp Mail_Server 3901 isa_server_outside 3901 netmask 255.255.255.255

  static (inside, outside) tcp SAP 50000 50000 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) tcp SAP 3200 3200 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) SAP 3299 isa_server_outside 3299 netmask 255.255.255.255 tcp

  static (inside, outside) tcp Mail_Server www isa_server_outside www netmask 255.255.255.255

  static (inside, outside) tcp Mail_Server https isa_server_outside https netmask 255.255.255.255

  static (inside, outside) tcp Mail_Server pop3 pop3 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) tcp imap4 Mail_Server imap4 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) tcp cms_eservices_projects_sharepointold 9999 9999 netmask 255.255.255.255 isa_server_outside

  public static 192.168.2.0 (inside, outside) - corp_vpn access list

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout, uauth 0:05:00 absolute

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.2.0 255.255.255.0 inside

  http 192.168.1.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp - esp-md5-hmac transet

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto-map dynamic dynmap 10 set pfs

  Crypto-map dynamic dynmap 10 transform-set ESP-3DES-SHA transet

  cryptomap 10 card crypto ipsec-isakmp dynamic dynmap

  cryptomap interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  No encryption isakmp nat-traversal

  Telnet 192.168.2.0 255.255.255.0 inside

  Telnet 192.168.1.0 255.255.255.0 management

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd dns xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx interface inside

  dhcpd domain.local domain inside interface

  !

  a basic threat threat detection

  host of statistical threat detection

  Statistics-list of access threat detection

  Management Server TFTP 192.168.1.123.

  internal group mypolicy strategy

  mypolicy group policy attributes

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value VPN

  Pseudo vpdn password 123

  vpdn username attributes

  VPN-group-policy mypolicy

  type of remote access service

  type mypolicy tunnel-group remote access

  tunnel-group mypolicy General attributes

  address-pool

  strategy-group-by default mypolicy

  tunnel-group mypolicy ipsec-attributes

  pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  inspect the pptp

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum:b8bb19b6cb05cfa9ee125ad7bc5444ac

  : end

  Thank you very much.

  Hello

  You probably need

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  inspect the icmp error

  Your Tunnel of Split and NAT0 configurations seem to.

  -Jouni

• Can connect via the VPN, but cannot see the files

  I can connect via VPN to my company network, but the files do not arise under Vista. I have no problem to see them on my old Windows PC, so this is a specific problem of Vista. On my old system, just click on computer and it shows me my company on the network's records. No Vista - cannot find anywhere, even if I am connected via VPN. Where are they?

  Hello

  Since it is the network of the company, there is no way to know hwo security is configured, unless you are a computer scientist in society.

  Not "mess up" your computer, first talking to the person in charge of VPN connections.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Standard user can connect to the new network wireless only in local mode - no Internet pass through by the router.

  My wife now takes a laptop (HP Pavilion) with her on a business trip.  The computer that runs Windows Vista Ultimate 64-bit SP2 with all updates.  I have his set as a standard user account, just to keep him out of trouble.  However, with his own account, it can connect to a new wireless network, like a hotel or business she visits could offer.  But, invariably, she gets access 'local only' - no pass Internet through connectivity.  I had to give him the information of my account as an administrator, and then she is able to connect without difficulty.

  Of course, this isn't an ideal situation - standard user must be able to connect to the Internet through a new wireless network.  Otherwise, I should be able to change his account in such a way that it can be given to this authority without necessarily opening the entire system and its related vulnerabilities.
  Any help, suggestions or solutions?

  Hello

  I suggest you go through the information provided in the following link.

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• How to create users that can connect to the application?

  Hello
  
  
  As an example of Application provided by APEX, in this application, the administrator can create users and reset passwords, and the user can connect to this application. How is this happening?
  
  Now I know how to create users and reset passwords through the corresponding working table.
  
  But I don't know how to use the user to to connect to the application? I tried several times to use the user create by ADMIN to connect to the application, but I failed.
  
  I can't find any setting in the sample Application, but it do.
  
  If any good plans?
  
  I thank in advance.

  There are two ways you can handle this... Build users of the APEX and continued them through the api of the APEX (not recommended by what I saw several comments here, outside the development environment) OR in your application, you could build a custom authentication system...

  Here is a link to explain how make one:
  http://djmein.blogspot.com/2007/07/custom-authentication-authorisation.html

  Thank you

  Tony Miller
  Webster, TX

• Can connect to the server (although very slowly) but unable to connect to the internet

  Original title: network connectivity

  I have a user who has been connected to the internet through our SBS server.  All of a sudden, it can connect to the server (although very slowly) but unable to connect to the internet.  The network and sharing shows that it is connected to a public network not by the domain server.

  I hooked another computer for network wiring and it worked fine.  I changed the wiring, and it still doesn't work.

  Any ideas?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Can connect to the IPSec VPN, but can not see the internal network

  I have several users that can connect to our rooms of ussing IPSec VPN on a 5505. I have a user who can connect, but cannot see the internal network. This user is using DSL with a speedstream 4100. However, I have another user with the same configuration that can connect and see the internal network. Newspapers in ASDM show the link, but do not seem to show any errors trying to access internal. Any help will be greatly appreciated. Thank you, Bill.

  Add...

  ISAKMP nat-traversal crypto

• Cannot ping the default gateway with Centrino Advanced-N 6235 on XPS 12 but CAN connect to the Internet

  I have a XPS 12 with an Intel Centrino Advanced-N 6235 wireless card.  I can't ping the default gateway with the wireless card.  When I use a USB network adapter, I can ping the default gateway for the wired connection.  I can connect to the Internet and the internal network with the wireless card and can ping other computers on the network.  I am trying to run a program to connect wireless to a projector.  I have two different programs for the two different projectors.  I can connect by cable but not wireless.  I think that the problem is anything that does not make me a ping of the default gateway or something on the wireless card.  I have a 10 latitude with a Broadcom wireless card that is connected to the same access point and can ping the default gateway and can connect wirelessly to two projectors.  They all have two windows 8 Pro.

  I downloaded the new drivers from Dell, uninstalled, reinstalled, tried to update Windows install the drivers, all with no success. Any ideas?

  The solution of the problem by chance.  I was connected to the computer with a different network than what has been used to authenticate user account on the wireless.  When I switched the user account for the user account that was logged on to the computer was the same who authenticate to the wireless, it worked.  Go figure!

• I can connect with the Administrators account without starting windows in safe mode in win xp pro sp3

  I can connect with the Administrators account without starting windows in safe mode and if yes, how?

  If I ca not, how can I load the graphics in safe mode drivers as all graphical interfaces are not displayed correctly.

  Thank you, Andre

  If XP Pro using the Welcome screen, press CTRL + ALT + DELETE to bring up the classic login box.  In the connection box, type the administrator user name and password. Boulder computer Maven
  Most Microsoft Valuable Professional

• vrealize 6.2 unable to connect on any tenants, can connect to the default tenant

  Helping people, I've been scratching my head for 4 days now.

  Environment

  DC - 2012

  Vcac-device 6.2

  identity device 6.2

  IAAS services on windows 2012

  also haven't tried with vcenter sso sso no chance.

  It is a new environment

  the good:-I can connect to the default tenant with the account admin and all domain account that I add access to.

  the BAD

  All new tenants, I create, I am unable to connect to

  I get the error

  401-Unauthorized: access is denied due to credentials not valid.

  You don't have permission to view this directory or page using the credentials you supplied.

  -J' tried to rebuild at least 10 times (about to abandon VCAC and start learning the IAC :-/) - (ran the 6.2 prereq everytime script)

  -all servers are NTP synchronized without delay.

  -All DNS entries are in place with the research front and rear.

  -all services 28 show such registered unit VCAC

  -no error in catalina.out vcac device

  -Although I am accessing a link of tenant https://Vcac-IAAS/Shell-UI-app/Labs -(laboratoires est mon locataire)

  Catalina.out shows holding = "vspehre.local"

  2015-01-22 01:22:13, 915 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 8 ' holding ="vsphere.local"] com.vmware.identity.websso.client.MessageStoreImpl.add:221 - added new entry MessageStore: %s, the size of the store: %s

  2015-01-22 01:22:30, vcac 276: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.endpoint.SsoResponseListener.consumeResponse:77 - you POST'ed to the Websso client library!

  2015-01-22 01:22:30, 276 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validate:72 - SAMLResponse validation...

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.ValidationState.validateDestination:64 - destination request validation: HttpservletRequest destination = https://Vcac-app.ten.local/Vcac/SAML/WebSSO/ssoSAML message destination = https://Vcac-app.ten.local/Vcac/SAML/WebSSO/SSO

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateInResponseTo:158 - optional validation request ID: _cc2719796497ca852f426b742b4a79fe

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateAssertion:180 - assertion validation...

  2015-01-22 01:22:30, 304 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SamlUtils.getIDPCertByIssuer:944 - IDP is config for: https://Vcac-ID.ten.local:7444/WebSSO/Saml2/metadata/vSphere.local

  2015-01-22 01:22:30, 304 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SamlUtils.validateRequestSignature:597 - signature verification SAML message...

  2015-01-22 01:22:30, 305 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:247 - statement analysis...

  2015-01-22 01:22:30, vcac 317: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:319 - NameID: [email protected]

  2015-01-22 01:22:30, 318 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:320 - NameIDFormat: http://schemas.xmlsoap.org/claims/UPN

  2015-01-22 01:22:30, 318 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateAssertion:231 - affirmation of SSO successfully validated

  2015-01-22 01:22:30, vcac 319: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validate:105 - validated successfully received SAMLResponse

  2015-01-22 01:22:30, vcac 319: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.MessageStoreImpl.add:221 - added new entry MessageStore: %s, the size of the store: %s

  2015-01-22 01:22:31, 477 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl.acquireTokenByCertificate:467 - successfully acquired for the user token: {name: administrator, domain: ten.local}

  2015-01-22 01:22:32, vcac 036: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl.renewToken:531 - token successfully renewed for the user: {name: administrator, domain: ten.local}

  I tried to start the deafult Web site using my Vcac-service account (in Internet Information services Manager).

  -all certificates are self-signed

  stores - identitiy are tenant default configured correctly and working for

  -All virtual machines running on SSD without isssue IOPS / s.

  -all licenses have been configured.

  -NO errors in the IIS logs

  MSDTC - without errors or questions

  -MSDTC running on SQL server and server IAAS

  Authentication - MSDTC defined on mutual authentication (also haven't tried no authentication)

  when I try to browser goto https://fqdnofiaas/vcac(shell-ui-app) (from the host local or server IAAS) I get

  you have no power to view this page. the system records all attempts to inappropriate access.

  I suspect the question to an IIS misconfig or any Advisor of Bug?

  THX

  https://Vcac-IAAS/Shell-UI-app/Labs https://Vcac-IAAS/Shell-UI-app/Labs You must have add org/orgname https://vcac-iaas/vcac/org/labs

  https://vcac-caf e, vcac, org, orgName for orgs no by default.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results