SSD boot drive upgrade for XPS 8500

I want to add a new SSD 128 GB as boot on my XPS 8500 drive when using my original 1 TB hard drive as a data reader.  Questions: Is there a set of instructions on how to better fulfill the new OS install and configure both hard drives?  Can I do a clean install of Win 7 using the Dell XPS 8500 Windows reinstall DVD on the new SSD? The XPS 8500 supports SATA III drives?  Thanks for any help on this.

An additional question: the processor can be upgraded (from i5 to i7) using the motherboard the original XPS 8500?

Hi DoctorDED,

8 GB of memory is sufficient for a machine dedicated to the photo or video editing. However, if you run multiple applications with a lot of resources at the same time especially treatment image or video, CAD or 3D modeling (for example, Premiere Pro, Photoshop and After Effects), then you will surely be benefited by 16 GB of RAM. With more than 8 GB also comes in handy if you make heavy use of virtualization such as Microsoft Hyper-V or VMWare Workstaton tools, especially if you are running multiple operating systems simultaneously.

Answer please if you have any other questions.

Tags: Dell Desktop

Similar Questions

  • A confirmed upgrades to the video card for XPS 8500?

    I want to upgrade the video card in my XPS 8500 (currently a 7570). I searched around and literally impossible to find a simple confirmation of a card that suit and will work (not to mention that the other a Dell offers, 7770, I think that it is). I would really fall into a 6850 6870 or 7850 (in the order of less for the most favorite). I found lots of info on cards that work with the old 8300, XPS, which uses the same power supply as the 8500 according to me. However, I'm not sure if the limitations of the space are the same in the case of XPS 8500 compared to the 8300.

    Would appreciate any info. Thank you!

    I don't see why not.  I just installed a R9 Sapphire x 280 in my XPS8500, I have an OC of HD7850 Sapphire.   This card is crazy for a long time.

  • Tecra R10 - hard drive upgrade for SSD

    Can we say if it is possible to change the hard drive for an SSD?
    It would be perfect!

    Why is it not possible? As far as I know Toshiba proposes some models of the Portege with SSD and SATA drives.
    For the time being SSDS are quite expensive and I don't think the best solution.
    What is the reason for the exchange of HARD drive?
    I still have no experience with SSDS, but I've read several articles ve noticed that Intel X25M should be good. According to the tests that has this HARD drive, comparing to other manufacturers, data transfer rate but it is quite expensive.

    Anyway, when you replace the HARD drive please let us know how it works, and describe your experience with it. It can be very useful for other members of the forum.

    Good luck!

  • Is an upgrade to XPS 8500 to 8700 worth?

    Salvation;

    I am a happy owner of a XPS 8500, in which I have recently updated the GT 640 stock to a 760 GTX graphics card.  Today make a Support Dell driver update inspection and I remembered that my PC is a 'first version 2012 '.  As a guy who is used to look at the new cars every 2 years, I do with my Dells.

    Apart from a system with a new guarantee, what improvements are there between the 8500 and 8700?  Looking at the specs, I have trouble seeing what is really better.  Of course after looking at the new Chevy I would always wander on to the Buick.  The new Area-51 is something to see!

    Is it fair to ask this question: is there a XPS 8800 just around the corner?

    It depends on who you 8500. If it's a core i7 3770, then in my opinion, not worth the upgrade. the 4770 is faster and the 4790 slightly faster than the 4770 again, but is probably not noticeable to most of the work.

    If you do not have an SSD, look by adding a. It will make a huge difference.

    The 760 GTX is good, but really it's just OK. (I'm a so I'm not bagging on yours) a upgrade to a GTX 970 would be noticeable if you game.

    Next gen on the horizon Intel chips are Broadwell and Skylake. Read about them. Mon.02 is later in 2015 or 2016 at first there may be a few desktop computers that are really a step above what came out today.

    All that being said, if you have need for speed CPU now, build a K 4790 and overclock.

  • Replace the HHD Pavilion m7 with SSD boot drive

    I have a Samsung 840 Evo SSD that I managed to install in the 2nd internal drive Bay. It works great as a second internal drive, but I want to make the boot drive for Windows 8.1 or simply swap with the internal HD, which is the current startup disk.

    I used the program Samsung disk magician to clone the internal HD to the SSD, but it does not appear in the BIOS, so I can't select it as your startup disk. I tried to boot from the SSD with the internal HD disconnected and it fails, apparently because the laptop does not see the operating system on it.

    I updated the BIOS to F.29, which is the current version, but the SSD simply does not appear in the BIOS.

    Any help is most appreciated!

    jamesinsf wrote:

    I still have the problem. Anyone have any ideas? Thank you.

    Go to disk management and check if the SSD is an indicator of STARTING activated. Use Gparted: http://gparted.org/

  • Screws for msata for XPS 8500 card card mother screwposts (informative)

    I ordered a Crucial msata for my XPS 8500 card.  Installing an msata card requires two screws to CAPSA map for the two screwposts on the motherboard.  Crucial does not include screws and neither does Dell.  Working with Dell I was able to identify the specifications for the required screw neeeded anchor map msata in positions.  Without the screws an msata card will fall just out of the slot msata.  For any of you out there with the same need is the specification of the screw:

    SCR:M2X3:KSH:MS:BLO

    The screws are tiny metric screws and without the specs, they are incredibly hard to find.  No specification on page 58 of the Dell XPS 8500 manual, which is where the diagram is for installing an msata card.  Dell is expected to add this info in a footnote on page 58.

    Note to Dell's Support staff who might be reading this: this specification of screws for the use of other customers of the file.

    I bought a portable screw Kit made by Rhino Fry Electronics which had the screws in it. These are screws x3mm m2. The kit is the AS-11 model number. Bar code is 8 54190 00103 9.  Rhino has a websit - www.rhino-tek.com.  You can also find them on ebay.  Anyway, I put a map of msata Crucial 256 MB in my XPS 8500 and am a happy camper with her.

  • Size of boot drive VM for tests VAAI

    The Certification Guide to storage said in the section "Configuration of VMS and storage for VAAI - TTY, BlockZero and FullCopy Tests:

    NOTE the virtual boot drive for the virtual machines used for the test should not exceed 6GB.

    But according to the same manual, I have configured all VM startup disks size 20 GB.

    It means that I should reinstall all VM 16?

    When we created all our virtual machines using vSphere client, we made 20 G as the boot disk size.  We were able to pass all the tests.

    It seems contradictory, but I think we're talking about the size of the virtual disk, and it refers to the size of the virtual machine hard file.  If your vmdk is too large, you will not be able to fit 8 virtual machines in your data store during the tests mentioned by figure 1-15.

  • Upgrade to drive BlueRay for XPS One?

    Hello:

    I bought an XPS One (Product) Red in January of this year.

    It came with an 8 X DVD + / RW drive.

    I just had time to set up the XPS One over the weekend.

    Can I put the XPS One on a BlueRay player?

    What would be the cost of the upgrade, provided that this is possible?

    Thank you.

    Treat Ralph


  • Ensuring that my SSD boot drive is set to AHCI mode

    Hello

    To make a needed firmware update on my newly installed SATA3 instructions (6 GB/s) SSD, the manufacturer said that Windows 7 should run in AHCI mode. I'd appreciate if someone would answer the following questions:

    Q1 - How to determine if Windows 7 is running in AHCI mode? ( KB922976 apply?)

    Q2 - in the BIOS, the page where the cottage the SATA2 ports (3 Gbps) and where my CD/DVD drive is connected currently shows under Storage Configuration mode is set an 'Enhanced' and SATA before as 'IDE' not 'AHCI '. My SSD does not appear on this page, so is it relevant?

    Q3 - in the BIOS, under "Onboard Devices Configuration", the Marvell Storage Contrller is set to "IDE Mode" (the other options are 'AHCI' and 'Disabled') and the 'Marvell Boot Room' is set to 'Auto '. I suspect that this controller is one of my SSD. Is this relevant and if so, do I just put it mode 'IDE' to 'AHCI '?

    Ultinate of Windows 7 SP1 (64-bit)

    Motherboard - Asus P & P55D-E

    -Boot disk Kingston HyperX 240 GB SSD attached to the gray SATA3 port on the motherboard.

    Thank you

    Hello

    I am pleased that you can enter the world of the AHCI.
    -J' have only changed the first two entries without the need for the second. So I can't tell if this is important or not. It seems not so much for me.
    -You're good to go with the update of the firmware. It's a good thing that your reader can be upgraded to Windows. My OCZ SSD requires a boot for flashing CD.
    -In my case, I had set my IDE DVD drive because it would not work in AHCI. Have you tried to use it? If you have any problems, leave as is.
    Carlos
  • Desktop HP ENVY Phoenix 860VX: how to replace ssd boot drive in a desktop HP ENVY Phoenix 860VX?

    I bought a desktop computer HP ENVY Phoenix 860VX with an SSD of 256 GB of disk as a boot disk with a disk of 1 TB storage.  I have a Samsung Evo Pro 500 GB SSD I want to use as the startup disk.  I cloned the original drive to the Samsung Evo without problem.  I opened the PC folder to move hard disks, and I can't find the SSD drive.  I found the pretty easy storage of 1 TB drive but cannot find the SSD drive.  Can anyone help?

    Greetings,

    You can have a PCIe M.2 (Non - SED) Solid State Drive 256Go.

    This drive connects to the motherboard, it's the size of a stick of gum.

    It can be mounted vertically or stand flat on the motherboard (MB).

    M2 the drive is much faster than an SATA 3 SSD.  You may not be happy with this change if you bought a SATA 3 SSD. You might be better off going to a 512 GB m2 if the MB supports. I noticed that the m2 drive runs closer to the rated speed when using a k i7 - 5930 or an i7-5960 x due to the track of 40 PCIe bus as opposed to 28 tracks on the i7-5820 k.

    It should be close to the PCIe slots. ASRock, Asus and Gigabyte locate M.2 slots here as it connects with the bus PCIe x 16 and uses the bandwidth of one of the 16 slots x.

    If this is true, install the SATA SSD in the available Bay HHD using an adapter 2.5 inches. Then change the default boot device in the BIOS for the SATA SSD. You may need to experiment on what SATA port you use. EFI can be finicky. It is also possible that you may have to reinstall the original image. I have an Asrock x 99 card in m.2. Asrock BIOS is much more forgiving and configurable. I'm not familiar with MB of your PC or the boot configuration options available during the passage of a m2 boot device to a boot SATA device.

    This change of equipment could also ruin to restore the PC using the original image. It depends on whether this change of equipment is a configurable option to purchase.

    See you soon!

  • The T60 SSD HARD drive upgrade

    I have a Lenovo T60 (2623-KFU) for about 3 years now, and it's always hard with no real problems. I was thinking some SSD solutions. Is it possible (and not void the warranty) to replace the hard drive with an SSD Fluxsol? I hope that the Motherboad/BIOS/others does not limit this anyway.

    Otherwise, I do not use my WWan device and was considering to replace care wireless with a SSD Mini PCI-e card. I know that blocking the BIOS a few components, but is the restriction to only wireless cards, or for all?

    Yes the SATA 2.5 inch SSD will work, but it is limited to SATA1 mode, you are able to change the hard disk without affecting the warranty because it is considered to be a customer replaceable unit or THOUGHT.

  • Satellite Pro C660 graphic needs driver upgrade for Adobe Lightroom 6

    I tested 5 Lightroom on my Satellite Pro C660 and it worked fine.

    I decided to do it, and that week Lightroom 6 came out, so I bought Lightroom 6.

    LR6 gets to the start screen, then stops and closes the Windows7.
    I contacted Adobe and they went on my machine and identified the problem as being the graphics card and says I need an update of the driver.

    I've been on the Toshiba site and it says that the latest driver is 8.15.10.2189, which is the one I currently have (and was changed in 2012).

    I've been on the Intel site and their obtrusive says that the machine has a pilot custom then contact Toshiba.
    I looked around the Intel site and tried to install that seem to be plausible drivers, but have not found one that would install.

    My installation includes a monitor LG 22 "connected to the laptop with the spread of the desktop on both screens (laptop and monitor).

    No one knows what would be the upgrade of the driver I need or how can I know?

    James

    The page Intel graphics driver can be used, and you can also download the driver directly from the page.

    This CPU does support your laptop?
    What Intel GPU (Intel HD graphics chipset *) is the support of laptop?

    The Intel download page provides a driver Intel as an exe or zip package
    https://Downloadcenter.Intel.com/

    You need to download and unpack the zip package.
    You will then be able to update the driver in Device Manager, choose the Advanced installation update procedure.

  • Longs E11 Boot BIOS upgrade for Windows 10


    sure my friend:

    http://www.Microsoft.com/en-us/software-download/Windows10

    When it asks for a product key, just skip the steps the first time you connect on the web that will authenticate it, since you've already made the update.

  • XPS 8500 - replacement HDD and SSD

    I'm looking to upgrade of storage on my my Dell XPS 8500... My question here is twofold:

    1. I want to replace my current 2 TB HDD (disk storage) with a 4 TB or 5 TB of HARD drive. I will be able to use and see the full 4-5 to? Or is this a case where I will not be able to use the entire disk or will need to score? Y at - it an update of the BIOS that will allow me full access to training?
    2. I am also looking to replace my mSATA 256GB SSD (boot drive) with a 500 GB mSATA SSD... will it be any problem read this disk after installation (plan to do a clean install of Windows and reload my programs)?

    Thanks for your help. Hoping to update soon, but did not buy until I knew what I was getting myself into.

    Its a fairly recent machine with a UEFI BIOS, so it should be good... If you have already upgraded to Windows 10 then your system is already a unit of 10 windows and you should be able to clean the Windows 10 installation on the new SSD. If you haven't you should upgrade now as free upgrade expires tomorrow. #

    You must use the SATA AHCI operation. I assume you have your system already set up this way as you already have a 256 GB mSATA.

  • HP Pavilion G6 2310se: HARD SSD update drive

    Hello
    I'm running the disk HARD 500 GB 5400 RPM for the moment and it is slow for me. I want to update for Samsung (MLC) 128 GB sata III 6.0gbps 7 mm (Ultraslim). with a caddy HARD drive where I can place my HARD disk to store data and SSD is used only for windows boot. I can not find on the internet if my laptop supports SATA III or not? and it will boost speed up my laptop or not?
    any help please.

    Other features are 8 GB DDR3 RAM, Intel 3210 M core i5 processor and other things like bluetooth wifi etc etc.

    Hello

    Manual: http://h10032.www1.hp.com/ctg/Manual/c03593041

    Data sheet: http://support.hp.com/us-en/product/HP-Pavilion-g6-Notebook-PC-series/5330578/model/5361234/document/c03693385/

    SSD upgrade will improve the time of startup and overall performance drastically than anything else. SSD boot drive is an excellent choice. Use tools of cloning the SSD manufacturer (from their website) or other free tools available, to migrate the OS.

    Download, run this tool to know the SATA HDD type:
    https://www.Piriform.com/Speccy

    SSD now on the market is of SATA3 (6Gbps), it'll work in your laptop your model SATA connector to be I, II or III. They are compatible with reverse.

    Concerning

    Visruth

Maybe you are looking for