Similar Questions

• P50 and SSD PCIe-NVMe

  Does anyone know what brand/model/version of the solid state drive comes with a ThinkPad P50 configured with a 512 GB SSD PCIe - NVMe?

  I called the center of support here in the United Kingdom, but they couldn't help.

  I saw a lot of people tend to buy a HD at low prices and then swap with a Samsung 950 PRO NVMe m2.

  Could this SSD (950 PRO) be set as main (and only) disc?

  Thank you.

  You will need for the SSD tray to be ordered separately.

  https://www.lenovoquickpick.com/USA/system/ThinkPad/p-series/P50#accessory/66383

• M.2 SSDS that compatible with Alienware 17 R2 2015

  Hello

  I've owned an Alienware 17 R2 2015, I would add an SSD as drive for my windows. I would like to ask, this model supports this SSD:

  Plextor M6e M.2 2280 128GB PCI Express SSD

  Thank you.

  Yes, you could. 17 R3 and R2 15 support PCI-express m2

• ALienware Alpha - controller question

  I just got my Alienware Alpha from Friday, rather than go through the console mode with the controller provided instead, I plugged a mouse & keyboard & entered into mode of office since the beginning. Now my 360 controller acts as a mouse & controller at the same time. I looked around & apparently because I jumped mode console, I can not disable the mouse for the controller option. I tried to not uninstall Alpha Command Center because apparently it worked for someone else, I had no luck however.

  Thank you, in advance.

  Hello

  I did something similar when I arrived at Alpha.  Since then, I came to the conclusion that it is not a good idea to remove the Alpha user interface (or all alpha software), but it is a good compromise.

  I suggest that you re-install Center Alpha UI/order - do not know if this is possible - otherwise you will need to restore your Alpha to factory settings and start over (I had to do that!).  I hope it won't be too bad as you only Friday.

  You will need to connect to the interface user Alpha a couple of times and make updates.  There are at least two updates that fixes the controller and also graphic problems too.  You can only do these updates with the Alpha user interface, so it is important to keep for other updates.

  Now, on to the solution.  This allows to boot directly to Windows rather than load the interface user of Alpha.

  Log in desktop mode.

  -Open a window (command) in now the Windows key and press R

  -In the run box type: netplwiz

  - This opens a window of parameters of user accounts.  Check the box "users must enter a user name and password to use this computer".

  -Click OK.

  Once you have done what the above, your alpha will start as a normal Windows PC, so you can choose which user account to log (Alpha UI or Windows desktop), and it will default to the last used.  The startup time is much faster, but it will ask you to enter your password as a normal PC Windows.

  The only problem I found is that, after that a Windows update the controller no longer works.  I suspect that this is because Windows is a full stop and restart after the update instead of using the quick start that she normally does.  All you need to do in this case is to connect to the interface user Alpha once again, and then disconnect you, then back to your Windows account.  This will fix it until the next Windows update in this case, you simply do the same thing again!

  I hope this helps.  I've been running with this configuration for a few months and it worked fine.

• Z620: need help with the difference ("boot") of ssd pci-e cards and pci-e (BIOS) nand

  Hello

  I intend to buy a card pci-express ssd for access/faster transfer, and I read the topics concerning the problem of booting from that ssd, but still did not understand much to be honest.

  what I noticed, is that HP620 should work with older (like turbodrive Z), but not the based NAND, new Z turbodrive G2,.

  or only with a few tricks.

  now to my question.

  Some people say, this new nand ssd pci - e cards require a boot uefi bios and a few options, I do not understand.

  as I have a regular bios (not), is it true that you cannot boot from these new ssd expansion slot, or are there tricks like the passage to the AHCI and a few other options in the bios?

  If this is not possible, I'd be limited to regular use SATA ssd, limited to 500 MB/s of bandwidth, right?

  Thanks for any help

  Chris

  Found this info on the web;

  "There are actually two versions of the player. The original version uses the familiar AHCI Protocol, while a new variant is the NVM Express standard. The model of the AHCI is compatible with a wide range of motherboards and available among a wider selection of suppliers. »

  The version of NVMe is also supposed to be faster, but in reality, it is not much of a difference.

  

  I think that you need a motherboard with a socket m2 is to see a real difference in speed compared to the old version of AHCI.

  I understand that it is only the most recent Zx40 HP series range that supports readers NVMe but not sure 100%. It would certainly be a challenge trying to get one to work in a series of Zx20 HZ.

  My SM951 in CrystalDiskMark 5;

  

• The p300 supports booting from an SSD PCIE NVMe adapter?

  Hello

  I think I have a samsung 950 pro with an ssd PCIe adapter to start windows 10 on a thinkstation P300 (Machine type 30AG, e3-1281 processor v3 with latest bios-22/06/2016 FBKTC6AUS).

  Will this work?

  THIS MARKET! (Sorry for the caps, but I'm so excited.)

  I have installed the 950 pro in a pcie adapter, put it in the P300, installed the driver Samsung NVMe, initialized and formatted the disc (in the GPT, which is the same as my previous drive C) and then downloaded samsung data migration. I migrated my previous drive C to the new 950 pro, then shutting down my computer. I've detached from the old C drive, rebooted and went into the bios (F1) and I put the pro 950 (under 'other devices') # 1 start order.*

  It starts in windows 10 beautifully, as if she was made to do so; no hiccups, it simply works.

  Although NVMe readers are not officially supported on the P300, Samsung somehow got to work. I strongly suspect that it has to do with the pro Samsung 950 ROM option, which resides in the SSD and not on the computer, which allows you to start.

  * Make sure you just under "other devices" the 950 pro is the only drive listed. I have a data esata drive connected to my computer and the 950 pro as well as my data disk appears under the heading "other devices." at the start, my computer complains that no operating system is found. However, if I turn off my esata drive before starting, the p300 boots perfectly. I just turn on my esata after that I'm on windows.

• (Redirected) Alienware Alpha - monitor or TV

  I'm looking for comments and suggestions. I just bought 2 i5 Alienware Alpha for my 2 boys. They have screens VGA, that they can use, or they can use their HDMI TV. If we have to abandon the VGA they finally to have replacements for TV. Or, we leave only TVs and get new monitors or TVs for the Alienware.

  Someone at - it suggestions? (Cannot afford monitors suggested because of the purchase of the consoles).

  Thank you

  Hi lesterfamily3705,

  Please repost this in the forum of the Club of Alienware for help.

  http://en.community.Dell.com/Owners-Club/Alienware/

• Alienware Alpha refuses to play Star Wars Battlefront 3

  Not too sure what else to try...

  Bought a copy of PC of Star Wars Battlefront 3 of Dell.

  He arrived, installed original, installed the game, but the game would not load (game seems to be gray out originally). Installed on my Media Center PC Battlefront (i5 / 16 GB-RAM/GTX770SLI) and it will start and play without any problems.

  Went back to my Alienware Alpha (i5 / 8GB - RAM)... Upgrade to Windows 10... still has not loaded...

  Experience of GeForce uninstalled and reinstalled and updated drivers for the last... Still has not loaded...

  Updated RAM on my Alienware Alpha from 8 GB to 16 GB (ordered through Dell... shot in the dark)...  Still load the game...

  GeForce experience sees the game, but is unable to optimize or restart...

  Account Origin see the game... but it's greyed out on the Alpha...

  Windows sees the game as being "set up" and is unable to launch...

  Any help or suggestions here? I called the origin, with me by checking the settings of my account and some basic PC troubleshooting... Unable to find a problem...

  Reference called Dell... Transferred 3 times and told me its probably a "software problem" and that maybe they could help me if I paid them $129.00?... What is rather low because I bought the system, game and RAM directly through Dell...

  I've seen countless comments, posts and videos of people with Alphas playing this game...

  Anyone have any ideas on what I can try?

  This site has really not much help.

  After running around trying everything I could think of including updating my drivers and the operating system to upgrade my hardware and spend a few hours on the phone with the support of different groups... I ventured out of my own again and got the game to work...

  I had to completely uninstall the game and then re - download it again and reinstall it from scratch...

  Once I did the game loaded and play a lot.

• What to do with free mini PCIe - Flash for the swap file

  Hello

  in my T500, there is a free mini near the location of SIM location PCIe, but that's only half of length. I found an SSD at SuperTalent in these Dimensions. Someone out there who has tried to use this slot for storage, for example $TEMP or swap file?

  Kind regards

  Ronny

  It will not work. This SSD is designed for the Dell Mini 9, which uses a special type of mini PCI-e slot [FLASH_CON]. This slot machine is connected to a PATA or SATA controller on the motherboard.

  The DSS will not work on PCI-e standard minis housing because they are not connected to a PATA or SATA controller.

  I think that half height mini PCI-e slot is used for Intel Turbo Memory.

• Alienware Alpha lighting area questions

  Hi all

  Start a week or two ago I had a problem with lighting effects on my Alienware Alpha. When I first put it on the end of function bit turns in a few seconds they turn off. The only way have to stay on is to start on the office and go in the software AlienFX and change the color and click on apply / save. Everyone knows this? I tried to reinstall the command center by using the download page of the Alpha pilot, but has nothing good.

  Thank you

  Ved

  For those who have a similar problem, I have this problem. I found a post on the forums Alienware arena, indicating that there is a problem with the PC things standby in console mode. Basically everything what I had to do was to start in console mode, select 'Sleep' in the power options, wait a few seconds and to wake up the PC. My lights work fine now.

• (Redirected) A few questions about Alienware Alpha, didn't know where to ask sorry.

  Hi, I was watching and thinking about buying an alienware alpha, but I had a few 1 questions that I can't find any info on. So could someone please help.

  1st question and that is my main I need to know, can I run Ventrilo on it and play all the games at the same time or would I still need a laptop to use ventrilo to chat with friends?

  2nd video of question 1, I saw said that I could run non-steam game, is it true? I will mainly play steam games, but I want to just make sure I could still run games as League of legends and perhaps The Elder Scrolls online because he is going to play soon from what I've heard.

  3rd question and sorry about that one, but I don't know much about computers so I need to ask. I see that $700 and $850 versions have higher processors makes this mean for games? Also they have more big disks hard, it's just the space right storage? Sorry for this question, that I just want to ask before you buy

  Please any info on these 3 questions would be useful :) Thanks in advance.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware alpha bugs

  I recently purchased the Alienware alpha;

  I noticed a few bugs with the user of Alpha interface I'd like to be addressed.

  First of all, there is no option to specify a user name "" when choosing a WiFi network.  Maximum space to provide a password for the user.  It forces me to use the windows interface to connect to the network and then start steam through the Office for windows 8 (completely defeat the purpose of the UI alpha)

  Secondly, there are many problems with a wired xbox 360 controller iin switching between UI alpha and the situation as a whole steam UI.  Entering the steam UI after the launch through the alpha of the user interface with a wire of the selection process controller goes crazy and appears as if the game keys or the joystick is pressed constantly. Therefore, it is not possible to make all the selections through the intention.

  Third, (my biggest problem with the UI alpha).  When you enter the desktop mode, I have to select my user account (choice between the 'Alpha' usergroup and my admin user), and then enter a password. Instead, it would be more convenient when you select the desktop through the user interface of alpha mode, the system should go directly to the desktop.

  I appreciate that my comments go to the alpha development team to address these deficiencies.  Thank you

  Yablo

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• I am looking for a card PCI UMTS for Portege M700

  First of all Hi everyone, as above mentioned in the title is on the Portege M700, I am looking for a card PCI UMTS for this model have here an 8775 Sierra lying around, but unfortunately, it is not recognized in Win7, I can time can someone tell what card for this laptop is, or even something where I could get so...?

  Thank you apologize in advance

  Hello

  You need a module 3G Broadband?

  As far as I know that some of the Portege M700 series were equipped with the 3G module I think that it s of Novatel but I m not sure leave

  However, if you need a framework for the Toshiba notebook that would be consistent for sure, the best place for the purchase of these parts is your ASP.

  Guys could check what parts are compatible and could order from Toshiba if that would be really necessary

  Welcome them

• Skype for Linux Alpha starts do not

  I installed Skype for Linux Alpha on Ubuntu 15.10. But it does not start. I also have Skype 4.3 for Ubuntu. I tried to reinstall the alpha version, but it does not start.

  [Edited by moderator to add the label "LinuxAlpha"]

  After the last update it works... Thank you

• Pavilion: SSD is available for this?

  SSD is available for this?

  P1A95UAR #ABA

  3CE5380X0R

  Could you say sales of track and repair status, because I bought it from a company at prices reduced and they said that it was a sample displayed in a store of HP.

  Thank you in advance.

  Hello

  Here are its specs:

  http://support.HP.com/au-en/document/c04797004

  I don't know what exactly the sense of the commercial route. And since you bought a machine scondhand no way you can trace it is original, unless the seller tells you. Original this is the United States.

  The State of repair, know no sellers of new clue. And the information provided is not correct:

  

  Kind regards.