SSL certificate not used for Admin Server connections

Similar Questions

• I do not use a proxy server to connect to internet, but Firefox is automatically configured to use the loopback address.

  I have a direct connection to the internet and that you do not use a proxy server. Every few weeks, Firefox will automatically reset itself to be configured to use a proxy to the loopback address (127.0.0.1). Manually change to 'No proxy' works, but I have to do so every time I open the browser or even a new tab. The only solution I can find is to create a new profile that gives me a new, clean install of FF, but then I lose all my Add-ons. This has happened several times now and it's extremely frustrating. I have scanned for malware, but have not found any problems.

  Hello rjlasser, first of all please make sure that none of your extensions is the origin of the problem (some circumvention of censorship of youtube addons do also use proxies for example).

  Otherwise please see How to fix the preferences that will not save for common solutions.

• I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock?

  I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock? In my opinion, it works on IOS8. Because I have not used in a long time, it has reset and does not connect to the wifi until I unlock, and I forgot the password to unlock it. I tried to clear up my iPhone but it requires Internet and iPod can not connect to Internet ithe, I also tried to restore the 'home' button and the lock button while connected to iTunes on my computer and that did not work either... Please let me know if I haven't tried something or have missed something.

  Thank you

  You have to follow the instructions for the erasure or use recovery mode in iTunes again. . You do not specify what happened when you tried to follow these instructions, or instructions for iTunes, which you tried to follow, but you will be able to exit the mode disabled via iTunes if you do not have Wifi:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  See you soon,.

  GB

• Can not unlock with administrator password. Windows 7. laptop is not used for a year.

  I just took on my Asus Eee after not using for a year. I can not open even with administrator password. How can I unlock without using the software tool?

  Hello

  It is all of the information that we are authorized to issue in these Forums.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Hello.

  Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

  Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

  I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

  For example ftp.domain.com:21

  Please try the suggestion 2 above and let me know if it works.

  Concerning

  Vivek

• Best Linux o/s to be used for VMWare Server 2

  Hi guys,.

  What would be the best Linux o/s to be used for VMWare Server 2 and why?

  Are there known traps or other questions that you may have experienced with some operating systems.

  Thanks for the comments.

  I don't know about the 'best' that I only use openSUSE x 64 but I find it incredibly stable and reliable, especially when compared to a lot of Vista (out of production). Image single with 8 GB disks and non - RAID SATA with usually about 10 virtual machines running constantly. CentOS and Ubuntu seem to appear a lot here, but that could be wrong, since people in general do not post when things are working very well. Fedora seems to have arisen recently with more than its share of problems.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Up to version 7.01 FF ever hanged, but with 7.01, after having not used for a period of time (hours or less), it crashes. No solution except again?

  Up to version 7.0.1 but never crushed/hnag, FF with 7.0.1 after you have not used for a period of time (hours or less), it crashes. No solution except again?

  Upgrade your browser Firefox 8 and try

  • getfirefox.com

• I have my ID Windows Live ID have not used for quite awhile and I would like to start using it again, the live ID is always committed, however I don't remember the password

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  original title: can reactivate you my windows Live ID?

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  It is a peer-to-peer (user forum.  You don't talk to Microsoft directly.  The answerto your question is, "No."

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

• How to disable the password screen when the computer is not used for a few minutes

  original title: password problems

  How can I stop my computer from ebb to needing a password, if not used for a few minutes

  Right-click your desktop image and select Customize,

  Click on the link at the bottom right, screen saver

  Uncheck the underlined

  

• Server responds only in time, FTP is not supported on this server [connection timed out after 15001 millseconds]

  Hello

  I repeatedly get the message "the server responding is not in time, FTP is not supported on this server [Connection timed] out after 15001 millseconds" when you try to download via the built in Adobe Muse FTP uploader. I've been in contact with my host who is hostbaby, and they said my ip address was blocked but when they unlock it is the same thing. I tried to change the automatic method and also to change the passive mode, but not joy.

  Any thoughts on how I can fix this?

  Have you checked with any FTP client to access your server host separately just to confirm if they are blocking access?

  You can try any as Filezilla FTP client to confirm access to the server with the same identifiers.

  Thank you

  Sanjit

• SSL certificate has expired for the endpoints BlackBerry push last Thursday!

  There is a generic cert used for endpoints BlackBerry push Eval expired last Thursday.  My embed code for the push service is the appropriate certificate validation and can no longer send.  I checked several end points of cpNNNN.pushapi.eval.blackberry.com and they all share the same expired SSL server cert (no wonder they are shared, surprisingly it is expired).

  To test:

  OpenSSL s_client-connect cp4714.pushapi.eval.blackberry.com:443

  Expansion: NO
  SSL-Session:
  Protocol: TLSv1.2
  Encryption: RC4 - SHA
  Session ID:
  Session-ID-ctx:
  Master-Key: E6D069A6416C5672A99B5D7FA4482190D03E9E14985FE2EB33AF51C580151200490CB06874412C62DAA945A35EA2BE22
  Key - Arg: no
  Krb5 main: no
  PSK identity: None
  PSK identity hint: None
  Start time: 1402341727
  Timeout: 300 (s)
  Check the return code: 10 (certificate expired)

  Cert server returned:

  Certificate:
  Data :
  Version: 3 (0x2)
  Serial number:
  5b: 49:CB:40:09:A7:D3:FB:72:F2:EE:4 b: 97:39:28:47
  Signature algorithm: sha1WithRSAEncryption
  Issuer: C = US, O is Thawte, Inc., CN is Thawte SSL CA
  Validity
  Not before: Jun 5 00:00:00 GMT 2013
  Not after: June 5, 23:59:59 GMT 2014
  Subject: C = CA, ST = Ontario, L = Waterloo, O = Research In Motion Limited, OU = IT, CN is *. pushapi.eval.blackberry.com

  ETA on when a new server certificate will be installed on endpoints pushapi.eval.blackberry.com?

  Seems now fixed.  New certificates of June 11 00:00:00 GMT through 11 Jun 23:59:59 GMT 2014 2015 are in place.

• View domain for the server connection help please

  OK, I don't know where to put this so I hope it's a good place. I tried to install view connection server on my last windows 2003 server. I built a laboratory at home with a dedicated server for vCenter, AD and view connection. When trying to install view connection Server 4.5 sound telling me:

  "This computer is a member of a domain, but no server connection can be found. Please make sure that this computer is properly connected to a domain and that a domain controller is available before to perform this installation again'

  OK, so I logged on windows Server 2003 view connection using active directory so why it gives me this error?

  Thank you.

  Start by pingging your AD server's DNS server.  Also, try ping the DNS server of the virtual machine that you are trying to install the view on.  You can try it joined to the domain by using the command NET DOM.  We do in our environment at all correct control but can not quite understand our this is the problem.  You can also check the event viewer on the virtual computer to see if he throws all Kerberos events associated with the certificate expiring this testimony of course that the server may need to be joined to the domain.  The virtual machine was interrupted for a while?

  See you soon,.

  Chad King

  VCP-410. Server +.

  Twitter: http://twitter.com/cwjking

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Do not use the WebLogic jms connection credentials

  I have a foreign JMS provider set up for our installation of Sonic, with name of user and password specified for the Server JMS (aka the JNDI context) and the connection factory.
  
  The JNDI lookups work correctly, but when you try to establish a connection, use the factory connections, I get an InauthenticClient exception. When I put a watch of notification on the agent of sound messages to see the rejection of applications for connection from WebLogic, I see that the user name is not powered.
  
  This all works in standalone code test with the same user name and password, connection directly to Sonic and Sonic notification about watches that I don't see the username (different code; the WebLogic application is an application servlet writes of spring).
  
  Has anyone seen a similar problem or have any idea of what can go wrong?
  
  Support details:
  
  WLS 10.3.5, JDK 1.6.0_29 (Sun 64-bit), 5.6, SonicMQ 8.5.0 RHEL.
  
  < foreign server name = "SonicMQ_JMSServer_US" >
  AppSvcs_cluster_subdepl < sub-sub-assignment-name > < / sub-sub-assignment-name >
  < by default-targeting-enabled > false < / by default-targeting-enabled >
  ...
  < name of foreign connection factory = "SMS_Repl_XACF" >
  < local-jndi-name > jms/sms/replication/SMS_Repl_XACF < / local-jndi-name >
  < name-jndi-remote > jms/sms/replication/SMS_Repl_XACF < / remote-jndi-name >
  < user name > obscuredusername < / name >
  < encrypted password > {ESA} OBSCURED3mZ7twptOpo4910ypdGPG7nXpcJMEA = < / password encrypted >
  ...
  
  com.sonicsw.jndi.mfcontext.MFContextFactory < initial context factory > < / initial context factory >
  < sign in url - > tcp://nj09mhm5097.mhf.mhc:24100, tcp://nj09mhm5098.mhf.mhc:24100 < / sign in url >
  < jndi-properties-credential-encrypted > AES} {OBSCUREDIRVVGVUp/BqQCQss8tcouHe + rVHog8 = < / jndi-properties-credential-encrypted >
  jndi property <>
  com.sonicsw.JNDI.mfcontext.domain < key > < / key >
  < value > PRP_US_IT < / value >
  < / jndi property >
  jndi property <>
  Java.naming.Security.principal < key > < / key >
  < value > obscuredusername < / value >
  < / jndi property >
  < / foreign-server >

  Hi Steve,.

  The Servlet can access the factory connections via a standard EJB resource reference? I think that this may be necessary so that the application server can be able to encapsulate the connection and inject the credentials of foreign JMS 'createConnection ".

  See http://docs.oracle.com/cd/E21764_01/web.1111/e13727/j2ee.htm#i1313669 for samples.

  HTH,

  Tom

• SSL certificate has expired for Google Mail

  Hi everyone, I'm new here so please be gentle with me!  I got a Palm Pre on the network 02 since October and have been able to use my email very well.  I use Googlemail and 02 using IMAP and today it keeps giving me error messages saying that the SSL certificate has expired.  I tried to turn on/off SSL and downloaded updated software for the Palm OS, but it doesn't always. Is there an easy fix for this? If I change POP that works and how do I do this? Thank you very much. Hellywobs.

  Just to say that I solved this problem from another source - the date was wrong on my phone.  No idea why, but now, I put the date today, it works again. I went to the Date and time App and made the change.  Just thought I'd post here in case anyone has the same problem - it's an easy solution.

• selection of the dates not used for the list

  OK, the last one for today...
  
  I'm trying to fill a list with values of the month years between the first entry in the table and the month previous (sysdate - 1 month).
  
  At the moment I have this, which will select every month between the last entry in the table and sysdate-1.
  

  select to_char( add_months( start_date, level-1 ), 'MON-YY' ) d, to_char( add_months( start_date, level-1 ), 'MON-YY' ) r
  from (select add_months(max(date_received),1) start_date, add_months(sysdate, -1) end_date from localdata) where start_date < end_date
  connect by level <= months_between(trunc(end_date,'MM'), trunc(start_date,'MM') ) + 1

  But I want it uses the first entry and select all the months between then and sysdate-1 where there is no entry in the table.
  
  I tried something like that, but it returned no data:

  select to_char( add_months( start_date, level-1 ), 'MON-YY' ) d, to_char( add_months( start_date, level-1 ), 'MON-YY' ) r
  from (select min(date_received) start_date, add_months(sysdate, -1) end_date from localdata) where start_date < end_date and to_char(start_date, 'MON-YY') not in (select to_char(date_received, 'MON-YY') from localdata)
  connect by level <= months_between(trunc(end_date,'MM'), trunc(start_date,'MM') ) + 1

  Hello

  pearlyred wrote:
  Thanks for the comment tip, it works great now. I just need how to sort date wise.

  If missing_month is a string, such as "JAN-2013", then it's not good for sorting, since the string "JAN-2013" come after "FEB-2013"(et aussi après «FEB-2014"et «FEB-2015") because 'J' comes after 'F'. "»»» If you want to sort, and then keep the month as a DATE, like this:

  WITH     got_missing_month_s     AS
  (
       SELECT     ADD_MONTH first_month, LEVEL - 1)     AS missing_month_s
       FROM     (
                 SELECT TRUNC ( MIN (date_received)
                                         , 'MONTH'
                                )          AS first_month
                 FROM   localdata
            )
       CONNECT BY     LEVEL     <= MONTHS_BETWEEN ( SYSDATE
                                               , first_month
                                        )
      MINUS
          SELECT  TRUNC (date_received, 'MONTH')
       FROM     localdata
  )
  SELECT       TO_CHAR (missing_month_s, 'MON-YYYY')     AS missing_month_d
  ,       missing_month_s
  FROM       got_missing_month_s
  ORDER BY  missing_month_s
  ;
  

  The main request has 2 columns:
  missing_month_d is for display: it's a string such as "JAN-2013".
  missing_month_s is for sorting: it's a DATE.