SSL problem when running Apache httpclient Jrun and not standalone Java

We use the Apache httpclient 4.1.2 to post on an external server, using SSL. The position works well when it runs since Java JRE, but when the code is running in a JRUN/Colfusion instance that uses the same Java JRE, the error message returned is:

javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated

at com.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:352)

at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128)

.......

When you debug the connect using the -Djavax .net .debug = all , the illustrated internal error message is:

java.lang.RuntimeException: could not generate secret

Is there some settings strange ColdFUsion, to undo to do this job? We installed the cert of the other server in the/rje/lib/sercurity/cacerts file, but has not made a difference. Why the work of independent java and not Jrun?

The JDK version is 1.6.0_24 - b07

ColdFusion: 9,0,1,274733

Advertisement

OK, the solution was simple, to disable jsafe the right way by adding the property of java command line:

-Dcoldfusion.disablejsafe = true

Hope that jsafe is not used for something vital...

Tags: ColdFusion

Similar Questions

  • Faced with problems when running CPC and CPA Imort commands

    Hello
    I am facing problems when executing the commnads CPP and CPA from command line to import a file of CPA. I followed a Blog through "b2bGurus", but the third step is not clear. As for what should be OK step 3.
    It will be a great help if someone can explain as well as the exact command to texts needs.
    I'll also send the link I followed orders "http://www.b2bgurus.com/2008/11/cppcpa-feature-in-ebms.html".
    In this bolg followed the steps as "how to the PRC and the import of the CPA."

    Kindly help as this is urgent.



    Thank you and best regards,
    Kunal Banerjee

    Hi Kunal,

    Its a typing mistake, please try

    Of $ORACLE_HOME/ip/tutorial and run below command
    Java oracle.tip.adapter.b2b.utility.EBMSUtility cppcpa.properties

    Concerning
    Nandagopal.S

  • How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

    How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

    Hi PAtwoodwu,

    1. what program are you trying to install?

    2. did you of recent changes on the computer?

    3 does happen with all programs?

    Check and make sure that the Windows service install is running on the computer.

    (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

    (b) right click on the Windows Installer service and then click Properties.

    (c) if the box Startup type is set to Disabled, change it to Manual.

    (d) click on OK to close the Properties window.

    (e) right click on the Windows Installer service and then click Start. The service should start without errors.

    (f) click on the file menu, and then click exit.

  • Windows 7 - when I have my laptop and not really doing anything on it next to the arrow of the hourglass cursor appears.

    Original title: a ridiculous?

    When I have my laptop and not really do any what on it next to the arrow of the hourglass cursor will be displayed. Is this something normal and computer said is just doing something in the background? I'm still learning on the computer. Can you also tell me if Microsoft supports all follow along classes for suck lol. You know just something that would help me to learn more than just check email and surf the web. ythank to help with this? To clerify my? a little more I use Win 7 and Mcafee total protection in what concerns the hourglass, it appears for a few seconds then works.

    Learning - in particular, there are many explanations of key aspects of Windows 7 to Windows 7-help & how-to , there are video demos online which are very informative, as you can see people from operating common components such as Windows Explorer.  But please do not ignore the help Windows on your PC because it also has useful info - search for the start-up, for example, and it will give you a brief explanation of the things that you can then decide to go further by using the link above online.

    Led busy PC - actually it is normally a circle occupied rather than the hourglass XP but I guess that's what you mean.  It is difficult to comment without knowing how long it is for & how often, but the short answer is - Yes, the PC can get other background tasks when you leave it sit idling the day away.

  • Problem when the PWM signal combinning and analog signal TOGETHER!

    Hello everyone,

    first I DAQmx 6212, and I need to run the water pump small (9V - 16V) that should be driven by a PWM signal; I also have a motor (5V - 13V) for a water supply which must be controlled by an analog signal and it has built in a force feedback potentiometer, I logged onto this potentiometer correction + 5V the DAQmx and used the output voltage of the third extremety as a value to diagnose to know the position of the engine.

    My VI shows:

    1 is a normal meter production to create my PWMout signal.

    2 is an analog input, I use it as a PWMin to the LabVIEW to diagnose what is happenning in my pump water through the cycle and frequency.

    3 is an entry of the third extremety of the analog potentiometer.

    4 is an analog output that I used as power supply of the motor valve and I used an AC/DC amplifier for aplify signal the DAQmx and the motor road, between the two (3. 4.) I made a comeback with a few calculations, I had a P-controller to know the real position of the engine valve.

    My problem:

    When setting to 1. and 2. in the same VI only, I get an own PWM output with no problem.

    also with 3. and 4. in the same VI only i can control the motor valve without any problem.

    but when I put all these 4 set found in the attached VI, I have a problem as the engine valve turn continuously without stopping even if I change the position of the valve between 0 and 100%, I should mention that I see a PWM normal outside a signal on my oscilloscope, another thing to delete one of (1 or 2)  and run the engine valve VI works fine without any problems.

    so this my problem, if you can think of any solution please let me know.

    Thanks in advance for your help.

    Kind regards

    Caliente

    Here's your VI, slightly modified so the two analog inputs belong to the same task.  This if only for purposes of illustration, I him have not tested.  You will still need to do some debugging.

    While changing your VI, I noticed another potential problem with your original configuration.  You have configured the two tasks of AI for the same frequency, but read you 10000 samples of one of them and only 100 samples from the other (and throw it most of it).  Data acquisition data are buffered, and if you read as fast as you acquire, the buffer fills eventually.  If you read 10,000 samples of a channel, and the other channel acquires at the same rate, then when you read from the second channel you will get old stale data or an error full buffer.

  • I m get problem when running IE, Chrome or firefox

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: rundll32.exe
    Application version: 6.0.6000.16386
    Application timestamp: 4549b0e1
    Fault Module name: sprote ~ 1.dll
    Fault Module Version: 0.0.0.0
    Timestamp of Module error: 50212e17
    Exception code: c0000005
    Exception offset: 00079aed
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 16393
    Additional information 1 c: 649
    More information 2: 2d993315539d1b4488dfdd4c43482412
    3 more information: bde9
    Additional information 4: e8c962f1cadf8af02e768e3862dcb56c
    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: iexplore.exe
    Application version: 9.0.8112.16450
    Application timestamp: 503723f6
    Fault Module name: ntdll.dll
    Fault Module Version: 6.0.6002.18541
    Timestamp of Module error: 4ec3e3d5
    Exception code: c0000005
    Exception offset: 00039487
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 16393
    Additional information 1: c453
    More information 2: abcc8f7853b48d9807d6d51eb1fa5df9
    Additional information 3: c453
    Additional information 4: abcc8f7853b48d9807d6d51eb1fa5df9
    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
     

    Signature of the problem:
    Problem event name: BEX
    Application name: chrome.exe
    Application version: 21.0.1180.89
    Application timestamp: 503ebf10
    Fault Module name: StackHash_2d77
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception offset: 2028ad6b
    Exception code: c0000005
    Exception data: 00000008
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 16393
    Additional information 1 / 2d 77
    More information 2: 0f87f8924e80c4cc111b410bf65df663
    Information has additional 3: 408
    Additional information 4: a747d84ca122d3999f6adb84ba0cb3d8
    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    These are the messages of problem I m get... Please help me what I have to do...
    Thank you

    Hi Raja DSP,

    1. what version of IE are you using?

    2 did you do changes on the computer before the show?

    Follow the suggestions below for a possible patch with Internet Explorer:

    Method 1: I suggest you to run the fix - it and check if the problem still persists.

    Troubleshoot Internet Explorer to IE quick, safe and stable

    http://support.Microsoft.com/mats/ie_performance_and_safety/

     

    Method 2: If the method above is not enough you can follow the steps in the article mentioned below and check.

     

    Tips for solving problems when Internet Explorer hangs or stops working

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

    Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

    If you have problems with Google Chrome and Mozilla Firefox, you see the following link for their respective forums:

    Google Chrome

    http://www.Google.com/support/chrome/

     

    Mozilla Firefox

    http://support.Mozilla.com/en-us/home

    Let us know if that helps.

  • Problem when running server SOA

    Hi, I'm looking for from the SOA server. I started successfully to Server Admin, but I'm having problems when starting Server SOA. When I'm doing that I get many errors, follow three last lines in the console:

    12 characters do not match "Expressions of folklore <>" expected "" "
    TForm is running and is accepting applications
    12 characters do not match "Expressions of folklore <>" expected "" "

    When I am trying to start SOA server administration console (settings soa_server1-> control-> check soa_server1-> Start/Stop, then click Start) I get: string received certificate of localhost127.0.0.1 - has no control of verification of hostname. Pawe certificate?-Komputer but check should localhost

    Could you help me? If I'm going to write more information.

    Thanks in advance

    Edited by: 948093 2012-07-23 06:07

    Hello

    It seems that when you call after a command.

    startManagedWebLogic soa_server1 'http://127.0.0.1:7001 '.

    try this way.

    soa_server1 startManagedWebLogic.sh T3: / / :

    Make sure you gave Admin Server port or not.

    Check your config file to check the port and IP address or correct.

    Kind regards
    Kal

  • Y560 - problems when running games

    Hello world

    I bought the Y560 about a year and half ago and I was a proud owner since.

    A few days ago I formatted drives, then reinstalled Windows and since I have problems executing Battlefield 3.

    The problem is this: after a few minutes of play, the screen freezes and I can't hear a sound of "grrrrrrrrrrr" on the speakers. I can not give any command keyboard and can only force - turn off the laptop.

    I had no problems to run the game before you reinstall Windows, so I guess that the problem lies in a driver conflict, but how do I know which drivers are the cause?

    Anyone have any ideas on how to solve this problem?

    Thank you very much

    Vyksa

    Problem solved! It turned out that the problem was with the game.

    Thanks to you all.

  • Problem when I add any object and camera

    Hi all, thanks for helping me with this.


    Here is a link to a video I recorded showing my problem.

    77c8e8bd-51e4 - 42d 7 - 97 d 8 - b918f7d12f84.3gp - Google Drive

    After you run the 3D Tracker and the creation of any object and camera.  The angle of the camera moves as the original video moves as well.  I want the camera to stay still instead of tilt angle of the video.

    Thank you

    Aaron

    Your screenshot is Aussie bad quality that I can't really tell exactly what you're doing, but looks like you're not understanding what the tracker of the camera is, or how it works. First of all, the video layer must be 2D. You have changed the video layer 3D and it would never work. Tracker camera recreates a camera inside the AE that corresponds to circulation, the focal length and the position of the camera to film the scene. Camera Tracker provides a way for you to create a ground plan and original that align to a starting point in 3D space of AE so the global center of the model is aligned with a geometry in the plan. Camera Tracker of the AE does not match lens distortion, so if you keep track of the shooting was shot with a lens wide angle and there is a lot of distortion so you must remove this distortion before follow-up or the edges of your 3D objects will drift as the camera moves unless they are located in the center of the photo that is free from distortion.

    I don't know what you're trying to accomplish with your shot. Looks like you followed the middle section of the video and the fact that the 3D layer. It would never work. The normal procedure would be to add a camera and a null value or a solid or a text composition. Then the 3D layers will be stick to shooting perfectly if there is no significant lens distortion.

    Please explain in detail exactly what you're trying to do and if you don't ccreencaptures put it on YouTube using full HD will give us something we can see better. It would have helped if there was audio on your video explaining what you were trying to do.

    Please enter Tracker camera find help in the upper right of the AE and study up on the functioning of the tool.

  • Problem when running of several blocks of entire function

    Hello

    I'm building a great system/function using LabVIEW. Therefore, to practice and make look it tidy, I create a VI of blocks to separate and combine certain functions. But, my problem is when I did, the simulation seems to work really slow and the results are different compared to when I had the whole function/system in a single block.

    For your information, every VI blocks that I created has a loop control and simulation. When I have all interconnected, I put them all in another loop control and simulation, because some functions that I use to connect them together could not be used without the loop.

    Wondering if having a loop control and simulation in every block contributes effectively to this problems as each loop will run depends on the number of time that I put in the loop.

    If it doesn't matter which method to avoid this problem happen? My system/function looks terribly messy and it will be difficult for me to present no later than at the end of my project.

    Thank you.

    Hello

    I think what you are trying to achieve is to use simulation subsystem functionality. This allows the functions to execute outside a loop of simulation so that you can create a Subvi. After selecting the functions in your simulation loop you would like to be in a Subvi, select Edit» create Simulation subsystem. Let me know if that helps!

    Also, here is some information for this: http://zone.ni.com/reference/en-XX/help/371894E-01/lvsimhowto/sim_h_subsyssa/

    -Zach

  • Bex problem when running the Illusion of power

    I installed a graphics program called Illusion of power and when it runs I get the problem "has stopped working", with the following report:

    Signature of the problem:
    Problem event name: BEX
    Application name: power Illusion DEMO.exe
    Application version: 1.97.0.0
    Application timestamp: 466838e8
    Fault Module name: StackHash_e98d
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception offset: 00000000
    Exception code: c0000005
    Exception data: 00000008
    OS version: 6.1.7601.2.1.0.256.1
    Locale ID: 2057
    Additional information 1: e98d
    More information 2: e98dfca8bcf81bc1740adb135579ad53
    3 more information: 6eab
    Additional information 4: 6eabdd9e0dc94904be3b39a1c0583635

    This is the full version, but I also tried installing their demo version and still get the same error.

    I also tried running it in a virtual machine under Windows XP on the same computer and works very well there.

    I have an i7 920, 16 GB of RAM, NVidia GTX470, Windows 7 Ultimate 64-bit.

    I'd appreciate any help to solve the problem or idea on what exactly is causing this problem.

    Hello

    I'm offering please contact the manufacturer of the software on this problem.

    There might be some particular software chance is not compatible with Windows 7.

  • DRIVER_POWER_STATE_FAILURE BSOD when running low on battery and out of hibernation

    I have 13 Duo Sony laptop and Windows 8 gives BSOD when it hibernates after critical battery action and I try to turn it on by connecting the power adapter. I suspect a driver is a problem. Can someone identify the driver from the memory dump?

    Here is the address in the dump file: http://sdrv.ms/18jx5ss

    Hello

    The attached file of the DMP is to bug checking DRIVER_POWER_STATE_FAILURE (9f) .

    This bug check indicates that the driver is in an inconsistent or invalid power state.

    By default it is failing pci.sys (NT Plug - and - Play PCI enumerator) that is NOT the real cause and is being blamed by something else.

    If we run one! IRP on the 4th parameter of the bug check (IRP address blocked), we get the following:

    [16, 0] 0 fffffa8007f09060 0 fffff88003826c48 00000000-fffff880009869f0
    ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\sptd.sys
    \Driver\pci dxgkrnl! DpiFdoPowerCompletionRoutine
    Args: 00000000 00000000 00000000 00000003
    > [16, 2] e1 0 fffffa8008dbb040 fffff80247fac830-fffffa8017f3af08 00000000 success error cancel pending
    ERROR: The symbol file is not found.  Defaulted to export symbols for igdkmd64.sys -.
    \Driver\igfx nt! PopRequestCompletion

    From the above, we can see three things. For me, it is very problematic and we will address as soon as POSSIBLE. However, the other two are small and may not even be a contributing factor, but let's take care of it without worrying.

    c:\windows\system32\drivers\sptd.sys is pass it through the Direct SCSI host - Daemon Tools (BSOD problems with Win 7 and 8 in particular.

    Remove as soon as POSSIBLE with the uninstaller - http://www.duplexsecure.com/en/downloads

    dxgkrnl.sys is the core of DirectX and works hand in hand with next igdkmd64.sys which is Intel Graphics driver.

    Make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

    Kind regards

    Patrick

  • Problem when running Quickstart FunctionExectution


    Hello

    I am able to run the quickstartFunctionExecution successfully using two different machines virtual Java but I don't understand two things:

    1. we started not locators, but also the cacheserver from the command prompt, is Don t it is mandatory to do?

    2 example says "* this is the peer FunctionExecutionPeer2 connects to the execution of the function."

    * This peer performs the function execution request and returns the results to

    * the applicant counterpart.

    But I do not understand where Peer1.java we put values to work and OR return the result, what I see is a simple recording function that's all. Only in the peer2 put us the values of the region as well as the execution and get the result using ResultCollector. Please clarify?

    Due to which I changed the code a little and try to run the same but facing problems, and they are:

    Approach We open the same project in two eclipses and modified the peer1.java, peer2.java as below and kept the XML as it is: in the quick start example

    When I run the FEPeer1 into an eclipse, it gives me results (while the data for the region), but when I see an another eclipse, it gives the error:

    Questions:

    It gives NPE because the size of the rc's 2 (despite the addition of 20 records int FEPeer1)? Second thing, it is the list is seen size 2, but the data is null, why so?

    Please help me as soon as POSSIBLE, because it will be easy to buy according to my POC

    Thank you

    Aqamah

    Hello

    (1) it is filtering the results to data from sentinel/marker that represents the end of the result set. You need something like that if the function has hasResult() set to true for the function and peers may not return any data. You must mark the end of the result set with a call to lastResult() which should return something (in this case dummy data which can be removed during the treatment). If you always know that the data will be returned, then this can be managed differently, especially in cases where you use a filter where the function will be carried out to operate on members with known keys. There are two Boolean values returned in a normal use without filter, as there are two servers and each server are collected in a single outcome, before being finally available for the consumer.

    (2) this is an open discussion forum and you do not need to close a question and so you should just start a new thread or question. It is useful to other people who have read the message board if you find an answer or a useful discussion to add this so that it is easier for others to find useful information between questions.

  • Access to variables in Captivate swf load problem when run locally

    I am charge 3 Captivate SWF in a Flash drive custom. Here is pseudocode that arrives just at the point:

    var cp1_mc:MovieClip = this.createEmptyMovieClip ("cp1_mc", 1);
    cp1_mc.loadMovie ("captivate1.swf");

    [wait (cp1_mc.rdcmndGotoSlide! = undefined) through setInterval]

    cp1_mc.rdcmndGotoSlide IS

    var cp2_mc:MovieClip = this.createEmptyMovieClip ("cp2_mc", 2);
    cp2_mc.loadMovie ("captivate2.swf");

    [wait (cp2_mc.rdcmndGotoSlide! = undefined) through setInterval]

    cp2_mc.rdcmndGotoSlide REST UNDEFINED INDEFINITELY

    The thing is, this problem does not occur when you test the movie in Flash, or happens when the player.swf is run on a server. This happens when the player.swf plays locally in an html page.

    Can someone give me a clue as to what is happening? My best guess is that it has something to do with Flash Player Security, because it happens that locally in a browser, but I do not understand what is happening.

    It turns out that it was a Flash Player security issue and I had to put the security settings to "always trust" for my local directory.

  • Problem when running iterative morphology

    Hi all

    I'm writing a VI that takes an input image and uses the morphological operations until the stop condition is met (the condition is linked with the resulting image). I want to retain the images obtained at each iteration. I tried to do with records to offset and creting a table of the image. Unfortunately, none of these reviews has worked... For some reason, the morphological operation affect my input image, so that all the images stored in the table show the result of the latest iteration. I tried to create a copy of the image in each iteration without success. I created a simplified example to illustrate the problem. I use a loop for whiich makes expansion n to an image of input text. I expect a result different dilated images stored in the output array. Anyone know what could be the reason for my problem?

    Thanks in advance.

    PS: I know I could specify the number of iterations that runs from the morphology of VI, but I do not know this number in advance. I need to apply morphological operations until meeting a condition evaluated in the loop. The idea is to transmit the resulting image in a registry to offset and evaluate each dilated image until a given condition is met.

    Make sure that you create a new image with a unique name for each step you want to memorize.  Use the new image that the destination image.

    If you use an image with the same name, it is the same image and is crushed.

    Bruce

Maybe you are looking for