SSL VPN 25 user license - impossible to get more than 2 SSL VPN connections

Similar Questions

• Impossible to get more than 1 channel to read with DAQmx cDAQ-9172 under Windows 7

  I have the cell load, voltage, and input thermocouple connected to a cDAQ-9172. My sensors entries have been scaled and verified in MAX, and all of them work.  DASYLab 13, the driver is "dcDASY.dll" and the hardware configuration is "NI MAX.

  When I add a task NEITHER-DAQmx Analog Input (that is, a set of scales) it appears correctly. If I add a second channel of the task and select it, I get this message:
  'Channel of task name saved with the module is not available. DASYLab resets the module parameters for usable first channel name task. »
  The name of the task remains the same for each new channel I have Add. If I change the name of the task by using the tab to the drop down menu, it says:
  "You have configured several ways out for the module. If you modify the task, you lose the settings. You want to change the task? »
  Both display the same data channels, and I can't work simultaneously several channels. It seems I missed something obvious, but I can't.

  The parameters are:

  Measurement and Automation Explorer 4.6.1
  NOR-DAQmx 9.0

  Material:-cDAQ-9172
  Slot 1 - NOR 9215 (0-10 Vdc analog voltage)
  Slot 2 - NEITHER 9211 (thermocouple)
  slot 3 - NI 9481 (relay)
  slot 4 - NI 9237 (entry deck w / excitement)
  housing 5 - OR 9402 (DIO)
  slot 6 - NI 9263 (0-10 Vdc output analog)

  Thank you

  You can't perform different tasks (continuous) HERE on a single chassis. The first tasks that starts will be 'the resource booking '.

  Combine the AIs of the various modules in a single task (see photo): start by creating the task of thermocouple. Then add AIs 9237 (e.g. Kraft) and 9215 (volts) using the button with the blue, symbol. Set the mode of synchronization of the task of "continue". Save the task, start DASYLab (second photo).

  Change a task (adding channels, etc.) to the MAX while DASYLab works always, will result in unexpected behavior. To synchronize the configuration of MAX with DASYLab, you will need to close/restart DASYLab or use the 'sync' of the function (see photo 3 "syncmax.jpg"). You can set this function as a shortcut by right-clicking on one of the eight green or grey circle things.

  You should think about an update of the MAX/DAqmx drivers. 9.x is a little outdated.

  Updated at least DAQmx 9.9, better 14.x or 15. 0 (stay far 15 1.x).

• I get threatening and abusive emails to a windows live user, how can I get more information about this user to report.

  e-mails in danger

  I get threatening and abusive emails to a windows live user, how can I get more information about this user to report.

  The information is provided in the source of the message. In OE, Windows Mail and WLMail, Ctrl + F3 reveals this.

• How can I configure Server 2008 R2 to disconnect users, who have been disconnected more than exodus 12 hours?

  How can I configure Server 2008 R2 to disconnect users, who have been disconnected more than exodus 12 hours?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms

• Get more than one individual target when activating a trigger

  Is there a way to get more than one target during the activation of a trigger. A target contains text, the other shows the photo or video. Each of them must be moved independently of the other and placed anywhere on the page. No idea how to do this? Thank you.

  You change the published HTML and assign it the same classes and IDs to several elements.

  Mylenium

• Presentation of master-detail Spry insert cannot get more than two columns?

  Ive been trying to get more than two columns only experiment with spry data sets and can not with the option to «insert master/detail layout» layout

  What I am doing wrong?

  ??????

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  "< html xmlns ="http://www.w3.org/1999/xhtml"" xmlns: spry = "http://ns.adobe.com/spry" > ""
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  < title > Untitled Document < /title >

  < script src = "SpryAssets/SpryData.js" type = "text/javascript" > < / script > "
  < script src = "SpryAssets/SpryHTMLDataSet.js" type = "text/javascript" > < / script > "
  < link href = "SpryAssets/SpryMasterDetail.css" rel = "stylesheet" type = "text/css" / > "
  < script type = "text/javascript" >
  DS1 var = new Spry.Data.HTMLDataSet ("benefitsdata.html", "bizben", {firstRowAsHeaders: false});
  < /script >
  < / head >

  < body >
  < div align = "center" >
  < div class = "MasterDetail" >
  < div spry: region = "ds1" class = "MasterContainer" >
  < div class = "MasterColumn" spry: repeat = "ds1" spry: setrow = "ds1" spry: hover = "MasterColumnHover" spry: select = "MasterColumnSelected" > {column0} < / div >
  < / div >
  < div spry: detailregion = "ds1" class = "DetailContainer" >
  < div class = "DetailColumn" > {column1} < / div >
  < div class = "DetailColumn" > {Column2} < / div >
  < div class = "DetailColumn" > {Column3} < / div >
  < / div >
  < br style = "" clear: both "/ >"
  < / div >
  < / div >
  < / body >
  < / html >

  ____________

  Spry framework all related examples are available here: http://adobe.github.com/Spry/samples/ you can take a look.

  On a sidenote, Spry has been deprecated and is no longer officially supported by Adobe: http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l

  I would recommend that you switch to a jQuery library to your other needs.

• Impossible to get HP pro 8500 has to connect to the internet.

  How can I get HP pro 8500 has to connect to the internet.  When I go through when I go to the e hp Print cebter I see a yellow warning box indicating that my printer is not connected to the internet.

  Inernet connection has been established and shown on eprint center once the printer was turned off and then back on again.

• Failed to get more than 1 email on the shipment line [blush].

  Hello and thank you for your time, just use Mozilla for 2 months [ex user of outlook express]. I want to send an email, the address is available for good, now I want to include a different address, as soon as I get the address first becomes 2nd red and my second address is not, only the first letter is then I quit smoking and do not send anything. I need help, my mail before develops. Thank you, frosty.

  Thanks Todd, had the opportunity to move your suggestions and I have learned from them, I now can I send more than one forward both by using the Enter key, thank you for helping me along the way. Frosty

• I can't get more than 3 "To" fields and need more - help!

  If I want to send an email I get only 3 "to:" fields before entering the title field. Because I can not type in more than one name in each field, how can I send the email recipients a dozen (without going through the address book for each of them, which seems a very tedious way to do)?
  I am a new user of Thunderbird, so forgive me if this is a stupid question, but I can't find the answer in the FAQ.

  Press ENTER after you have entered the third e-mail address.

• PIXMA MP210. When I print, I get more than one sheet of paper that goes thru.

  When printing, more than one sheet of paper passes through. So far, it still prints what I need. Then I get a message that there is a paper jam. I took almost all of the pieces, but can find no documents or anything in animal feed. I have not changed anything before starting.

  All solutions?

  Carl

  Hi Carl54,

  Performing a cleaning of the printer roller may solve the problem you are having.  To do this, please follow the steps located here.  We recommend that at least three cleaning of rollers on the printer.

  It has not responded to your question or problem? Please call or write us using one of the methods on the page contact us for further assistance.

• New Predator X 34-failed to get more than 60 Hz

  I'm curious to know if anyone has a fix/recommendations for things to try in this situation: I just got the X-34 last weekend.  I'm running it with a 980ti SC EGVA + on Windows 10 with Nvidia driver 359.06 version.  My problem is that I can't monitor running more than 60 Hz.  In the OSD, I turned it on IT with a Max of 100 refresh.  When I run the Nvidia Control Panel, I see that the monitor is running at 3440 X 1440 and Gysnc works.  However, when I select anything that exceeds 60 Hz and click on apply, the app immediately goes back to 60 Hz.  When I try to change the Hz using the Advanced view setting Windows 10, I can get it to apply a setting higher than 60 Hz (80, 90, etc.) but will not take the X 34 it - it wobbles black several times then past in black and will not appear until I have go back to 60 Hz.

  Feedback would be to understand whether it is a fixable problem (software problem or setting) or if I have a bad screen and need to RMA it back to the supplier.

  Thank you!

  JV1

  It's great to hear!  I know it seems strange, but the cable carries the bandwidth of the signal and if the cable is not of sufficient quality, it can cause these issues.  Longer cables tend to degrade the signal on the length, that's why you should always use the shortest cable possible for video signals

  Please do not forget to mark my post, or your response indicating the cable swap patch worked as a 'solution' here so that others with the same problem can see and find the solution quickly and the thread will be marked as "resolved".

  Cheers and happy playing,

  Vand

• on my desktop screen, icons are real blurry changed resolution and it wont let me get more than 60 hertz__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I tried to change the resolution and refresh rate, but which is not help and find a way back to the factory setting on the monitor or if it is a good idea. It won't let me go higher than 60 hertz says it's all my screen to refresh 19 inch flat screen made by dell please help out of options

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Was this work very well at a time earlier - I hope that recently?  Was your monitor there ever a better than 60 Hz resolution? Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Go to the Dell Support and enter your Service tag number.  Who should put up your system, including your monitor (assuming that your system is Dell - otherwise just check the make and model of the monitor) and get the latest device drivers available for this monitor and your version of Vista.  Once you have the drivers, you can install them through the Device Manager (start / Control Panel / Device Manager) as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. or it may be a simple executable file - it depends what downloads.  Given that this is the view I'd do the same for your video card (that this either Dell or another manufacturer's).  Once you have installed these drivers, restart and go to Start / Control Panel / customization / display settings and see if you have more options for resolution and can get things the way you want them to be.

  I hope this helps.  If this isn't the case, post back with the results of the above options, and any other information you can give us on the devices and the problem. Let's see if we can come up with a few other options to try.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• get more than the occasional spam in my Inbox Hotmail/Live Mail

  Recently, I have received more than the occasional spam in my Inbox Hotmail/Live Mail. The only constant is that they all @a.xxxxxxxx.com where the xs vary and other gibberish before the @. I used to get very occasional junk e-mail in my Inbox, but since a few weeks I get 4 to 8 per day but I did not have in my Gmail account that I do not regularly use this account.

  I have no problem scanning them but I was wondering why Hotmail filters are not picking up these. Maybe the spammers have figuered on Hotmail filters.

  I sent a note to Hotmail but I don't think thet even monitor the feedback.

  Wayne

  Hello

  The question you have posted is related to Hotmail and would be better suited to the community of Hotmail. Please visit the below mentioned link to find a community that will offer in support of your request:

  http://windowslivehelp.com/product.aspx?ProductID=1

  See also the below mentioned link.

  http://www.Microsoft.com/security/online-privacy/spam-prevent.aspx

• Behavior of ESX/ESXi with standard or free license on HW with more than 6 core

  I am wonderig what happens if I run an ESX license on processor with the core of more than 6.

  For example after the Installation of ESX on an OCTO-Core processor HW, what happens after insert a license that is not advanced or Enterpise Plus key.

  I run VM using only 6 of the 8 main? or the system prevents me to start a virtual machine due to the limitation of the basis of my license?

  The limitation of the base would be the license include all of the physical cores. It is different from the standard or free license which gives you 4 SMP (max 4 vCPU simultaneously).

  If you use advance or company, then the licence would be only to see max 6 cores processors and ignore the other 2 hearts. You can still use your virtual machine as usual. =)

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points.

• Impossible to get to the Admin account and connection to other user accounts.

  Original title: active administrator or no command prompt

  A 32-bit computer to windows 7, open a session locally, has two users. One user, his password has expired, the other no longer works here, of course, no one knows the password.

  I know the administrator password. However, I can't go to the administrator account. I tried the safe mode, no Director. I tried safe mode prompt, but the command line didn't upward just two users.

  By using the O/S Cd tried to repair, then invite command I got. Typed "net user administrator / Active: Yes that seemed to work."

  However once again any administrator from safe mode or normal mode.

  I hope that anyone has any ideas what to try.

  I'm surprised, I can't have the administrator somehow.

  I guess I'm screwed!

  You're pretty much the same situation as the owner of a safe who lost his one and only key. There is a lot of merit to have a spare key... In any case - I read your EMail.