SSM, Cisco IPS Manager, IPS version 1.0000 E2 module

Similar Questions

• IPS Version 7.0000 E4

  I use the JOINT-2 in inline mode and I get the event message according to status:

  evStatus: eventId = 1336563424842344750 = Cisco vendor

  Author:

  login host: IDS1

  appName: modprobe

  appInstanceId:

  time: May 15, 2012 05:48:23 UTC offset = 0 time zone = UTC

  syslogMessage:

  Description: Note: /etc/modules.conf is newer than /lib/modules/2.4.30-IDS-smp-bigphys/modules.dep

  Anyone know how to fix this?

  It is a problem known and open CSCta07007.

  Kind regards

  Sawan Gupta

• Upgrade version of CISCO IPS signature

  Hi guys:

  Anyone know the process for updating the signature on a CISCO IPS version, I want to do it manually. If somedoy can tell me the orders and all I have to do this.

  Concerning

  Luis;

  Updats manual signature for Cisco IPS sensors can be performed from the CLI as shown here:

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/CLI/cli_system_images.html#wp1142504

  Or from the interface of the IDM as shown here:

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/IDM/idm_sensor_management.html#wp2126670

  This process is also used to upgrade software base of the probe.

  Scott

• The IPS Version update

  We use the ASA 5510 with AIP - SSM 10 IPS version 6.0 (3) E1 with a licensee agreement valid. Now, we want to update version IPS 1.0000 E2, is that the update is possible? If so guide me how and also guide me or provide the link how to make a previous backup.

  Yes, I just do the same thing. You will need to download the upgrade with the extension pkg (not the image file that I kept trying to do). The file is: IPS - K9 - 6.1 - 1 - E2.pkg under the security software, software updates.

  Link:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ips6

  Once you have this file, put it on an FTP server, or place the file on the local client that you use to connect to the IPS with IDM. You will need to go to the update of sensor in the IDM and either choose FTP or local update path and point to the file. Sensor recharges when it is made, but you don't won't restart ASA. It will take about 5 minutes, and then you should be able to reconnect to your sensor with IDM.

  Here is a useful link on the upgrade:

  http://www.Cisco.com/en/us/docs/security/IPS/6.1/Configuration/Guide/CLI/cli_system_images.html#wp1231089

  Here is a link to make a backup of the config:

  http://www.Cisco.com/en/us/docs/security/IPS/6.1/Configuration/Guide/CLI/cli_configuration_files.html#wp1033167

  I hope this helps!

  Jason

• Cisco IPS 4200 Signature Update

  We are currently under evaluation and implementation of the Cisco IPS solution to our security needs.

  Our supplier has said that the signature 'online' updates to Cisco IPS is not possible - this is a manual process and we need to charge the device if you want to update the files.

  Somehow, it defies logic. Surely, I think, that any IP address should have the possibility of obtaining signatures updated "online".

  I apologize, because that question is too basic in nature. But could someone shed more light on this?

  Thank you.

  You have auto update functionality of Cisco IPS version 6.0, take a look at the attached picture.

  Update of signatures is * recommended * that you reload the signatures (restart the sensor), although this is not mandatory.

  Our IPS has not been restarted for over two months now and everything is working ok.

  Automatic update

  Automatic update

  Automatic update

• Ssm - 20 upgrade: cisco ips canceled upgrade because...

  Hi all

  I have upgraded our ASA 55402 with SSM-20 modules.

  Upgrading a module version 7.0000 E4 to of 6,0000 E4 everything went well.

  However, the other returned the following error when you try to upgrade the image and recovery partition:

  -cisco ips update cancelled because another upgrade or downgrade is underway

  The firewall that I intend to do the upgrade is passive.

  Firmware ASA: v9.1.1.

  Search Internet and this forum.

  Everyone fell on this?

  Thanx

  Jaap

  "Reset the hw-module module 1' it cause no problems at all.

• Does anyone have a guide to the Cisco IPS Manager Express Administrator?

  Hello.

  Does anyone have a guide to the administrator of the Cisco IPS Manager Express?, I need to update my license some a procedure?, if I have an IPS with Bypass the configuration at the time of the closing of SPI interfaces will license update or will have no affection?

  Thank you.

  Here you will find guides - everything depends on your version:

  http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/products_installation_and_configuration_guides_list.html

  For example, here is the 7.1 version SEO licenses:

  http://www.Cisco.com/en/us/docs/security/IPS/7.1/Configuration/Guide/IME/ime_sensor_management.html#wp2219086

  Apply a license will not stop interfaces... However, if you apply an update of the signature, you'll stop traffic for a short time during the installation of the signatures up-to-date inspection.

  Hope that helps.

• IPS Manager Express or Cisco Security Manager?

  Hi all

  We think buy the license for the 5512 IPS - that of above (IPS Manager Express or Cisco Security Manager) is the right tool to read about management purposes? Or I can be selected? If I can choose either, which guy are you advocating?

  See you soon!

  M

  How many systems do you have? If the number is high, the CSM is the way to go. Manage many systems (and keep them in sync with the same political) with IDM and IME is a nightmare. But if it is a single system, the EMI is the right tool for you. It works very well for the follow-up (up to 10 devices) and can also manage them (individually, it is not so easy for more then another system). And it's free.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Cisco IPS

  Hi all

  Take over some jobs maitainence on IPS and it then, I need help!

  ASA5510-AIP10-K9 with license expires a year. Motor still works well but no update of the signature.

  Question 1

  What is the SKU for license renewal? can you please paste the URL linked here?

  Question 2

  The IPS engine is version 6,0000 E4. Intend to upradge to 8,0000 E4 version.

  What is the propper upgrade path? Should I start by 7.0000 E4, then followed by 8,0000 E4

  or 7.0 (8) E4 patches are cumulative, so only need to apply the latest version?

  Question 3

  This is the little piece of capture "display version":

  Using 1032495104 bytes of available memory (65% of use) 675745792

  system is using 17.4 M 38.5 m bytes of disk space available (45% of use)

  application data using 48.4 M off 166,6 M bytes of disk space available (31% of use)

  startup is using 45.6 M 68.5 m bytes of disk space available (70% of use)

  Application log using 123.5 M off 513,0 M bytes of disk space available (24% of use)

  The upgrade of the motor system will cause the IPS running out of space? I focus on the second statement.

  Millions of thanks to all

  Noel

  1 as described in this document, you must have the support of IPS for your ASA - this is a service contract that includes the ASA equipment and software SMARTnet until updates of signature and software IPS. more commonly classified in support is "AR NBD" (Advance replacement the next day) and Cisco SKU CON-SU1-AS1A10K9.

  2. I think 7.0000 that e4 is the current version. You can upgrade to that (or 7.0 (8) E4) directly from your current version. Please see the readme file.

  3. your available space should be fine.

• Deployment of Cisco IPS 4240 devices

  I can't find all the information about the Cisco IPS 4240 features massive deployments. I have 6 devices, I intend to drive to several remote sites and tie in a centralized unit of Cisco MARCH. Without the help of any CSM/LMS software, is there a quick and dirty to pull this off? I think to set up a single IPS appliance, then pull and distribute the configuration file for the remaining devices. I would like to see how others have done this...

  If all of your sensors are of the same type (all 4240 to your situation) and will execute all the even correct configuration, then the copy command will help out you.

  There is a new feature added to the copy command in IPS 6.1 which will help you during the copying of config of one sensor to another.

  Complete you configure a sensor (using IME, IDM or CLI). When you are satisfied with the configuration, and then use the command copy to copy ON a server of SCP.

  Now bringup a second sensor and configure basic networking through the Installer settings (ip address, gateway, etc...).

  Now, use the command copy to copy the first configuration of sensors from the SCP server in the running of the second probe configuration on the second.

  It will ask you to change the network settings on the second probe.

  Answer n °

  The rest of the configuration of the probe first copy will be placed in the second sensor.

  The second sensor will keep its own unique IP address but win the rest of the configuration of the config of the first probe.

  Continue to do this with additional sensors.

  The process can then be repeated every time that additional changes are made to the first sensor.

  Remember though that this only works if the configuration of the probe will be exactly duplicated (including what interfaces would be monitored and how).

  If each sensor will have some unique tunings, then you need to manage each sensor on its own or buy CSM which can be used to share only parts of the configuration of multiple sensors.

• TCP ports used by Cisco IPS

  I looked up and down by Google and cisco.com for the answer to this, but can do not seem to find it documented anywhere.  I'm looking to identify all the ports that are required to manage a Cisco IPS so that I can open the firewall.  I understand that the following ports are necessary, but I don't know if I am missing anything, please see below:

  TCP 22: Source-online sensor Admin

  TCP 443: Source-online sensor Admin

  UDP 123: Sensor-online NTP Server Admin

  Am I missing something?  Thank you!

  Jonathan

  Boulder, Co

  Jonathon;

  If you do use automatic signatures updates and updates overall correlation, you must also enable the IPS management IP address access TCP 80 (signature and updates to GC) and UDP 53 (updates of the GC).

  Scott

• Cisco ips 6.2 vs cisco ips 7.0

  Hi all

  
  

  I have some experience with cisco IPS, but I want to know are there any differences between these two.

  or someone knows registred bug with this model two problem?

  which one is best? If you want to buy? I need comparison when I go to the docs all have two similar restistiction and the limit, usually for IPv6.

  
  

  My goal to choose any! which is better and why?

  If you have an idea please share. and thanks for that!
  

  
  

  
  

  Concerning

  Jonathan David

  Always choose the latest version 7.0 IPS because it has new features and bug fixes that have been found in the earlier version.

  BTW, if you buy IPS, you will not buy based on the version because the software comes with it by default, but you can upgrade and downgrade it accordingly if you want.

  There are actually many different models of IPS, and here is the list:

  -IPS 4200 series

  -Module AIP on ASA firewall

  -IOS IPS

  -IDSM2 6500 series Switch

  -AIM or NME IPS on routers

  They all can run the version 6.2 or 7.0 or any other supported in this platform.

• use of 100% of Cisco ips 4270 cpu...

  Hi people I have cisco ips 4270 version 7.0 (2) E3 when I try to access through IDM his show the cpu1 CPU = 100% and 100% = cpu4, but vary cpu1 and cpu2 can you please tell me what will be the solution to this problem...

  When I try to go to the configuration then its give me error... attached document attached please check...

  Hello

  Having 100% on some of your CPU is normal on the platform of the IPS.

  The device uses cycles slowed down it is to prepare for the handling of incoming packets and reduce the delay that it will introduce on their way, then is expected to get even under low load.

  If you want to get a better idea of capacity by % of your IPS you are currently using, you should have a look at the value of the load of the Inspection. Looking at the data that you have provided, you are about 25% at present.

  For the message timeout rdep, it seems to be a software problem. Looking more closely at the image you attached, you can also see "analysis engine status: no answer.

  It is somewhat difficult to troubleshoot those on CSC, so I suggest to prosecute TAC if you want to know the exact origin of cause.

  What I advise is upgraded to the latest code of 7 (0) which is I believe 7.0 E4 (5A), since it is more then likely fixed in this version.

  If you are looking for a quick fix, a reboot of the PPE must erase this but the problem will more then likely return later.

  Kind regards

  Nicolas

• Recovery v1 in cisco IPS SSL Session key

  Hi all

  In network audit, I have the comment mentioned by the auditor for cisco IPS 4270 device. but I don't get any solution for the same thing. Kindly help me out on this.

  V1 SSL Session key recovery

  The remote SSH daemon supports connections made

  using the version 1.33 or 1.5 of the SSH

  Protocol. These protocols are not completely

  cryptographically safe so they should not be used.

  With respect,

  Sashi

  Currently there is no way only allow SSH version 2 and disable SSH version 1 on IPS.

  Here is the request for improvement which have been filed for your reference:CSCsk84977

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk84977

  Hope that answers your question.

• List of Cisco IPS Signatures

  Hi guys,.

  I need list of PDF complete cisco ips signatures.

  Can someone help me find a link or a pdf?

  Thank you all,

  JV

  Hello

  I couldn't find any method to export the list of signatures. This could be because there are thousands of them.

  However, you can use the following link to find signatures of details.

  http://Tools.Cisco.com/Security/Center/home.x

  SPSP