Stack Bluetooth hang up Tecra S2

Toshiba Tecra S2, PTS20E-18S032GR, 01/30/2006 purchase model number
link to the description:
HTTP://DE.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=DE&PRODUCT_ID= 106134 & DISC_MODEL = 0

I have the problem, that the bluetooth Stack/Bluetooth Monitor (data "TosBtMng.exe") CPU-Auslastung of 97% by all other programming block and use all the system's performance.

Here s screen Shoot.
http://www.schreiterweb.de/t/tecra_15.jpg
http://www.schreiterweb.de/t/tecra_16.jpg

Hello

I checked with my Tecra M1 but in my case, the mem usage is a little bit lower (5 468 K) and the CPU is 00. I put really know why this happen, but the fact is that in your case it on 100 active processes running. I work with my Tecra very intensively and did no more than 60.

Back to the problem: have you tried to reduce the running process before enabling BT? Perhaps is there a resource conflict. Sorry but I have no other idea.

Tags: Toshiba

Similar Questions

  • Stack Bluetooth can not be installed properly on Satellite C855 - 29M

    Hello

    I just reinstalled Win 7 on my Satellite C855 - 29 M and have installed the downloaded drivers on the Toshiba site, which worked well. I had an unknown device in Device Manager that I discovered was because I needed to install the bluetooth stack.

    I downloaded and installed bfdp-20130924160827, then bltstk 20130924152252, as suggested on these forums, but after restarting the laptop, it will load Windows, then restart, then asks to use repair or start windows normally.

    None of these options worked so I have to use F8 know last good config that worked and when the laptop started to the top there was a message about the bluetooth stack with a missing file. I uninstalled battery bluetooth redownloaded and reinstalled but it's same thing.

    Any ideas guys?

    Hello

    To be honest I don't know what the problem is here and what exactly did you do.
    I checked the download page on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and the fact is that your laptop is fully supported for Win7 64 bit so all necessary drivers, tools and utilities are ready for download from Toshiba.

    Here is the correct order of installation for your machine:
    Windows 7 64-bit SP1
    SW 9.3.0.1020 Chipset installation utility
    Intel Management Engine Interface 8.0.1.1399_Package
    Driver Intel 8.15.10.2639
    and/or
    8.932.5.3 - a 120120-132503C AMD display driver
    Driver Intel Rapid Storage Technology 11.0.0.1032
    Realtek Audio Driver 6.0.1.6559
    ATI HDMI Audio Driver 7.12.0.7704
    HD 1.12.0300 SRS Premium Sound Technology
    Synaptics Touch Pad Driver 15.3.38.2
    Realtek LAN Driver 7.48.823.2011
    Driver Realtek Wireless LAN Driver 2.00.0016
    Intel Wireless Display 3.0.12.0
    Driver Realtek Bluetooth v2.3.9.0211.2012 filter package
    Battery Bluetooth for Windows by Toshiba v9.00.00T
    Bluetooth Monitor v4.08
    Intel USB3.0 Driver 1.0.1.209
    Realtek 6.1.7601.30130 card reader
    TOSHIBA value added package 1.6.0021.640203
    TOSHIBA Sleep 1.4.0022.000104 utility
    TOSHIBA resolution + plug-in for Windows Media Player 1.1.2004
    TOSHIBA Media Controller 1.0.87.5
    TOSHIBA Media Controller plugin 1.0.7.7
    TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 20
    TOSHIBA Web Camera Application
    PatchFiles PCIIDEREG - 1.2
    PatchFiles TosVolRegulator_1.1

    Everything that you have done is good and all you can do is remove preinstalled components BT system, and after restarting the laptop, try to install again.
    I don't know if this is the solution for you, but you can try to reinstall Win7 and install all the following stuff list installation displayed.

  • BT Stack installation hangs on Satellite C55-A-1PC

    Hello

    I have the new Satellite C55-A-1PC provided with 8.1 Windows pre-installed. Even if I see a bluetooth device in Device Manager, it is not any program to control the device Bluetooth, nor in the control panel or the start menu.

    That's why I download Toshiba Bluetooth Stack and want to install it. However, when the installation routine opens the new window "Install bluetooth driver", it crashes. It says "installing the driver of Bluetooth." Please wait. ", but nothing happens and the progress bar has not changed. I tried the version 8 and 9, and this is the same behavior.

    No idea why this is happening?

    > Even if I see a bluetooth device in Device Manager, it doesn't have any program to control the device Bluetooth, nor in the control panel or the start menu.

    The Windows 8.1 supports BT's own internal settings.
    -> Charming bat (Win key + C) parameters parameters PC-> PC & peripherals
    Here you will find the Bluetooth area

    If you enable the BT switch, Notepad will start to search for BT devices available in your environment.

  • Stack Bluetooth for Windows XP 64-bit edition?

    Hello

    I recently bought a LevelOne Bluetooth USB, which contained the Toshiba Bluetooth Stack on its driver CD. Unfortunately I can not use this battery on my 64-bit edition of Windows XP, as Setup installs only the monitor, but not the necessary drivers.

    So my question is: there will be a 64-bit version of the Toshiba bluetooth stack driver? If Yes, when and where can I get the appropriate update?

    Thanks in advance!

    Hi Modi

    It's a very interesting question. Unfortunately, there is no concrete information on this subject, but I'm sure that this update will be in public with the first official edition of 64-bit Windows XP. I put t believe that updates will be available before the units will be delivered with the 64-bit operating system.

    Good bye

  • DVD player WinDVD hangs on Tecra M9

    Whenever I put in a dvd, the system becomes inadmissible and the following message is displayed:

    Description:
    A problem caused this program blocking interact with Windows.

    Signature of the problem:
    Problem event name: AppHangB1
    Application name: WinDVD.exe
    Application version: 8.0.6.120
    Application timestamp: 46148ec9
    Hang Signature: 9056
    Hang the Type: 2
    OS version: 6.0.6000.2.0.0.256.6
    Locale ID: 2057

    Can someone help me stop this? Its a whole new Tecra M9 purchased in February 2008 on Windows Vista.
    Also the dvd player is Intervideo WINDVD for toshiba.

    Any help is appreciated more.

    Shaks

    I put t know exactly why the Win DVD hangs but especially something like that could be linked to the software files corrupt or confused.

    I think that the best solution might be the reinstallation of WinDVD software.

    Do you use the preinstalled WinDVD?
    If Yes, then you need to run the recovery CD because the WinDVD is a part of the image of Toshiba which is placed on the recovery CD.

  • Question about connector Bluetooth internal on Tecra 8100?

    Hi all.
    I have a laptop of 52 - sp pt810e - 13 c. Updated to 512 MB by using 2 toshiba 256 MB pc100 modules purchased on ebay, upgrade to a PIII 850 also obtained in a ebay and upgraded to a larger 40 GB wdc wd400e hard drive, with a lot less noise than 12 GB the original.

    Play with my computer, I found an internal connector "bluetooth" next to the inside which belongs to the keyboard.

    Why is this? Are there any new Bluetooth module for Toshiba Tecra 8100?

    Hello

    I guess that this connector is placed on the motherboard, because it is possible to upgrade the Tecra 8100 with an internal Bluetooth module.
    I don t find Bluetooth modules compatible but all supported and compatible parts, you can order from the Toshiba service partner in your country.

  • How to install the Bluetooth Module for Tecra S1

    Hello
    I have an old model S1 - PT831E-1DCEE-GR - and you want to install a Bluetooth (PA3121U-1BTM model?), but where should it be mounted?

    Kind regards

    Ulf

    Hello

    I think that on the Tecra S1 Bluetooth is optional.
    So on some laptops the BT has been installed on some not but I think that it should be possible to upgrade the unit with the BT module. (I hope ;))

    To my knowledge, the BT module must be installed in the place under the keyboard.
    But if you have no experience in these procedures you should t remove or install anything!

    The BT card must be placed above the keyboard area.
    To remove or to install the Bluetooth card, you must:
    1. remove the two white flat head screws.
    2 unplug the cable to antenna with the tweezers.
    3. disconnect the cards-SUMI (flat cables) on the system board.
    4 (remove the Bluetooth card) or (install the Bluetooth card)

    Be careful. But as I said above, usually it should be installed by a technician because the guys have more experience... you know

  • Stack bluetooth Toshiba occasionally prevents shutdown / restart / logoff

    Hello!

    Sometimes when I try to stop / restart / disconnect my M70 satellite it just does not react without any error message. The only way around this problem is to perform a forced shutdown of shell command "shutdown-s-f" with administrator rights.

    In the application event log, I see the following error message:
    =========================================
    The security descriptor of the application to the Server COM C:\Program Files Toshiba Stack\TosBtSrv.exe application-specific access is invalid. It contains entries of access control with permissions that are not valid. The requested action was therefore not. The application assign this permission of the security program; to change this security permission contact the vendor of the application.
    =========================================

    I integrated module bluetooth onboard, XP Home, with the new battery bluetooth Toshiba page.

    I couldn't set up my computer to use MS bluetooth stack. The solutions proposed on this forum has not worked for me.
    I tried to reinstall the toshiba bluetooth stack a couple of times. Without battery installed stop BT works very well.

    Suggestions how to fix this would be welcome.
    Thank you

    You have special firewall blocking parts of the application?
    What happens if you turn the server part of series the battery COM in
    -Mouse-right click on the Bluetooth icon on the systray-> Options...-> general: turn the Bluetooth Services: Bluetooth COM Port Service (uncheck)
    Reset
    Reboot-> problem still occur?

  • Bluetooth Modul for Tecra M1

    Hello
    I bought a bluetooth module for my Tecra M1 laptop. Maybe can someone explain where I have to place this module inside the laptop? Thanks for your help, Roland

    Hello

    Unfortunately I've never updated the notebook with a module Bluetooth internal and I m not 100% if it is possible, especially on this laptop.
    I have always used a USB Bluetooth stick and/or a PCMCIA Bluetooth card.

  • Stack Bluetooth installation fails

    I bought a dongle Bluetooth with the Toshiba Bluetooth Stack. Software installation is proceeding normally up to the point where it says "Insert the Bluetooth device and click Enter." I do this and stops the installation. I waited until half an hour, but he never went from 56 percent.
    I am running Windows 2000 SP4 on a 1 GHz Athlon. A lot of disk space and RAM. Tried to install it several times, even tried to close the firewall. Nothing makes no difference.
    Any suggestions?

    So please let me know what USB Bluetooth adapter are you using?

  • Question about Toshiba Bluetooth Stack & Bluetooth Dongle

    I was just assuming that I can use the software Toshiba for a bluetooth dongle? If Yes, how can I make sure Toshiba is used and not XP?

    If you use a BT dongle, which came with the BT-stack from Toshiba, then it is no problem at all. If it was delivered with any other BT-stack, then is will very probably work too, but limited time only (30 days). If you install the battery Toshiba BT then the MS stack will be hidden and the Bt-stack from Toshiba is active by default. If you remove the
    Toshiba BT-stack then the MS stack becomes active when MS - SP2 is installed.

  • Win XP SP3 hangs on Tecra S3

    I tried to install Windows XP Service pack 3 on my Tecra S3, and it fails (stops indefinitely) at the stage of "current execution after the installation process".
    I tried to do it via windows Update and also burning full ISO image, "Clean boot" mode, with all the other stuff turned off via msconfig.
    only race in service Toshiba RAID (in any case I guess that takes, and he raises is in any case)...

    no luck :(

    Are there stories of success with XP SP3?

    Hello

    I installed the SP3 successfully on my Satellite A series.

    SP3 contains all MS patches and fixes that have been published and released after SP2.

    That is why the installation of SP2 is necessary and important.

    Have you installed SP2 too?

  • Download stack Bluetooth USB dongle for Windows 7

    I have a Toshiba USB bluetooth dongle. The software will not be installed using Windows 7 and the dongle doesn't work at all on my PC. Download only that I could find for the software was for Toshiba laptops! Where can I download the software and drivers? I have to say that support for the updates of Windows 7 is very poor or very well hidden. Why is the only free battery for portable computer users? Have to avoid in the future products of Toshiba because the support appears to be nonexistent. Any help would be appreciated.

    > The software will not be installed using Windows 7 and the dongle doesn't work at all on my PC

    As I understand it, this software is designed to run under Xp/Vista. Right click on setup.exe and select Properties. In properties, select the Compatibility tab and you will see, Compatible mode.

  • Problem Bluetooth on a Tecra A8 - 10F with Windows Vista Business

    I can't send more than 5 MB of my laptop to another device.
    I installed driver also was last updated and still the same problem...

    What can I do to send more than 5 MB of files to another device?

    Check your disk space available to your destination device.

  • Tecra M3 - Bluetooth Stack versus Bluetooth Monitor?

    Previously, had a Tecra 9000 and never got bluetooth works smoothly and seem to have the same problem with nine Tecra M3... (maybe its me!)

    I checked and updated all the drivers downloads and had problems to any Bluetooth (M3 for IPAQ 3970). Found out that if you uninstall Bluetooth Stack and reinstall it the battery but do NOT install Bluetooth Monitor, everything seems to work (as far as I know). Prices Bluetooth Stack Bluetooth Monitor alternative (the installation guide does not suggest it)?

    Thank you all

    JonBer

    Hello JohnBer

    The only thing I can tell you about Bluetooth technology, it's that I use Bluetooth Toshiba Stack to connect to my mobile phone from Siemens. I sometimes use it as modem to check mail short and fast. I have no problem and the connection is fine. I use the wizard of a mobile phone is always properly recognized and I can use it without problem.

    If you have some problems to make the connection between your device and some external device, it can be caused by some false setting. To make good configuration between laptop and mobile phone was not easy. As I said to check all the Bluetooth settings on both units.

Maybe you are looking for

  • Re: Satellite R630-155 - part number for the LCD cover

    My 3 year old belle has hit my R630 on the floor and the plastic LCD casing/lid is now broken. Hinges are fine, the screen is fine - I just need to replace the plastic cover. How find the part number or get a new one? Thank you.

  • On Equium A200-1V0 unknown BIOS password

    Hello I have an Equium A200-1v0 when turned to is ask a password of bios for which I have not so how do I solve this problem. markb68

  • problem of scanning ' r

    have all in one HP PSC750 While turning on, impmediately messeag on the screen: ' scanningproblem, ste turned off for a while and then on, problem will disappear. " Tried all this, nothing works TX for help

  • All programs on the lack of menu start

    Original title: I click all. programs do not come up When all programs are not displayed. When I go to serch and type in programs they are there .what I can do to fix this?

  • Cannot install Brother HL-2070N for Vista

    I can't install Brother HL-2070N for Vista correctly. I went to the Brother Solution Center, downloaded the drivers and installed. However, when I printed, it did not work. Could someone help?