Stack Bluetooth installation fails

Similar Questions

• Satellite L750-176 - Bluetooth installation fails

  Hello
  I tried to turn on bluetooth via FN + F8 on Windows 7. After allowing the system tries to install the bluetooth driver Bluetooth stack. When installing, I get an error message "could not turn on Bluetooth monitor. Please activate the Communication of wireless switch located on one side of the main unit. »
  There is no switch on the computer toshiba laptop!

  After that, I have to cancel the installation. I already took a peek in the forum, but didn t find a solution.
  I have already restored the image original Toshiba Windows 7 and reinstalled the packet filter bluetooth and battery bluetooth but this didn t the problem fix.

  Any ideas how to solve this problem?

  Thanks Mario

  Post edited by: Edin
  added could not turn on turn Bluetooth power on. Please activate the Wireless Communication switch
  Located on one side of the main unit. »

  Hello

  The laptop seems to be equipped with a combo of Atheros Wlan card. This combo card also supports BT connectivity.
  But before install you the BT stack you must install first the filter of Bluetooth driver Package that can be downloaded from the European driver Toshiba page.
  This very important.

  By the way: you are right. There is no switch to turn on the WLan. You must use the FN + F8 to activate / disable the WiFi or BT

• BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7

  I have a Toshiba Satellite Pro R830 x 64 with Windows 7.

  Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
  The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".

  I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
  As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.

  I tried to uninstall and reinstall several times but still get the same message

  Help, what do I do to fix this?

  File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53

  Hello

  A question: could you please post you completely portable model number?
  I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.

  In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.

  However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past

• BECAUSE 11g Installation fails, saying "$GRID_HOME/bin/crsctl: no such file or directory".

  Hi all

  I have the problem mentioned below.

  Some time ago, I installed Oracle 11 g RAC. As long as this installation failed, I removed at home of the grid and home of the database using 'rm', rather than uninstalling as uninstall failed during execution. Now, when I do a new installation of Oracle 11 g RAC, I get the response below when running from $GRID_HOME/root.sh:

  [code]

  [root@racnode2 oracle] # /u02/app/11.2.0/grid/root.sh

  Run the script root.sh from Oracle 11 g...

  The following environment variables are defined as:

  ORACLE_OWNER = grid

  ORACLE_HOME = /u02/app/11.2.0/grid

  Enter the full path of the local bin directory: [/ usr/local/bin]:

  The 'dbhome' file already exists in the usr.  Overwrite it? (y/n)

  [n]: y

  Copying dbhome to usr...

  The 'oraenv' file already exists in the usr.  Overwrite it? (y/n)

  [n]: y

  Copying oraenv to usr...

  The 'coraenv' file already exists in the usr.  Overwrite it? (y/n)

  [n]: y

  Copying coraenv to usr...

  Entries will be added to the/etc/oratab file according to the needs of

  Assistant configuration database when a database is created

  Finished to turn the generic part of the root.sh script.

  Now root product-specific actions will be performed.

  2013-08-28 00:15:36: analyzing the host name

  2013-08-28 00:15:36: verification of superuser privileges

  2013-08-28 00:15:36: user has superuser privileges

  The file of configuration settings using: /u02/app/11.2.0/grid/crs/install/crsconfig_params

  Create the trace directory

  A bad configuration Oracle Clusterware found on this host

  Unconfigure the existing cluster configuration before you start

  to configure a new Clusterware

  Run "/u02/app/11.2.0/grid/crs/install/rootcrs.pl - deconfig".

  to configure the configuration has failed, then repeat the root.sh

  [code]

  I ran "/u02/app/11.2.0/grid/crs/install/rootcrs.pl - deconfig", but I have the errors below:

  [code]

  [root@racnode2 oracle] # /u02/app/11.2.0/grid/crs/install/rootcrs.pl - deconfig

  2013-08-28 00:17:19: analyzing the host name

  2013-08-28 00:17:19: verification of superuser privileges

  2013-08-28 00:17:19: user has superuser privileges

  The file of configuration settings using: /u02/app/11.2.0/grid/crs/install/crsconfig_params

  Default: no such file or directory /u02/app/11.2.0/grid/bin/crsctl order check the cluster racnode2 - n

  Default: no such file or directory /u02/app/11.2.0/grid/bin/crsctl order check the cluster racnode2 - n

  Oracle Clusterware stack is not active on this node

  Restart the clusterware stack (use /u02/app/11.2.0/grid/bin/crsctl start crs) and try again

  Impossible to check resources

  [root@racnode2 oracle] # /u02/app/11.2.0/grid/bin/crsctl start crs

  -bash: /u02/app/11.2.0/grid/bin/crsctl: no such file or directory

  [code]

  In fact, there is no "crsctl" under GRID_HOME/bin.

  OS: Linux

  If anyone can help. I am willing to provide any information.

  Thank you

  ...

  Hi snowflake, '

  Since u removed directories using the "rm" command, it removes only the installed files. There are some entries will be in/etc/oracle, / etc/inittab and some symlinks in /etc/rc.d (1,2,3,4,5,6) files. You must manually but carefully remove these entries, then force kill any crs, jar css process and reboot the machine. so no crs, css he's start at the start of the process. And then repeat the fresh install.

  Kind regards

  Pradeep. V

• I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  What should I do?

  Hello volvoxc70,

  I understand that you have downloaded macOS Sierra, but are not able to install it, because you are told that the download was corrupted. In a situation like this, the next step would be to remove existing installation application download and re - download.
  

  Applications downloaded from the App Store: click on the Launchpad icon in the Dock, hold the application icon until all the icons begin to jiggle, then click on the button to remove the application. If you later want the app, you can reinstall it on the App Store.

  OS X El Capitan: install, update and uninstall applications
  https://support.Apple.com/kb/PH21867

  If you do not have Launchpad on your Dock, you can access your Applications folder in the Finder menu reach > Applications. Once in the application, find install it macOS Sierra app, click once to select it, open the file menu > move to the trash. You will need to enter your administrator password to perform this operation.

  See you soon!

• Xcode Server installation failed (ssl configuration infrastructure)

  After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

  The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

  Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

  Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

  And then an error stating:

  Xcode Server installation failed (ssl configuration infrastructure)

  Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

  Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

  Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

  Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

  Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

  20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 10;

  currentPercentageCompleteRangeMinimum = 10;

  currentStep = 'Xcode stop server';

  percentComplete = 10;

  status = running;

  }

  20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

  20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

  (4 / 6) [START] stop nginx daemon

  (3 / 6) Server [START] stop API

  (1 / 6) [START] stop CouchDB

  (6 / 6) [START] stop builder

  (5 / 6) [START] daemon stop control

  (2 / 6) [START] stop repeat

  (5 / 6) [END - 0.05 S] Stop control daemon

  (1 / 6) [END - 0.05 S] Judgment of CouchDB

  (2 / 6) [END - 0.05 S] Stopping repeat

  (3 / 6) [END - 0.05 S] Stop server API

  (4 / 6) [END - 0.14 S] Stop the nginx daemon

  (6 / 6) [END - 0.16 S] Stop generator

  A successful!

  Total time: 0.32 seconds

  20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

  20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

  20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

  Note : There was a lot of posts like this that I missed:

  20 September 15:50:38 syslogd server [69]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

  20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "Configuring SSL infrastructure."

  percentComplete = 54;

  status = running;

  }

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

  20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

  20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

  (1/29) [START] make sure Xcode is accessible

  (1/29) [END - 0.20 S] Make sure Xcode is accessible

  Audit (2/29) [START] version of Xcode is supported

  (2/29) [END - 0.00 S] Check if the version of Xcode is supported

  Developer mode (5/29) [START] if necessary activation

  [START] Running (4/29) xcode-selector - /Applications/Xcode.app

  (29/3) [START] check if the server version is supported

  (3/29) [END - 0.02 S] Check if the server version is supported

  Data directories (6/29) [START] creation by default (if they are missing)

  (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

  (7/29) [START] create a symbolic link to the current path of the Xcode application

  Access to the repository (8/29) [START] HTTP configuration

  Integration of control (9/29) [STARTED] preparation

  Access [START] SSH configuration repository (10/29)

  (8/29) [END - 0.12 S] Access to the HTTP repository configuration

  (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

  (10/29) [END - 0.12 S] The access to the repository SSH configuration

  (11/29) [START] establishing the file config for Redis

  (12/29) [START] set up the config for CouchDB file

  (13/29) [START] Setup launchd job system

  (5/29) [END - 0.16 S] Enabling developer mode if necessary

  (9/29) [END - 0.23 S] Preparation of control integrations

  (11/29) [END - 0.16 S] Setting up the config for Redis file

  (12/29) [END - 0.20 S] Setting up the config for CouchDB file

  (13/29) [END - 0.20 S] Launchd jobs system configuration

  Group creation [START] (14/29) for users of service if required

  Saving configuration [START] (16/29)

  (15/29) [START] configuration CouchDB to use all cores

  (14/29) [END - 0.02 S] Creation of service if required users group

  Users of creative services [START] (17/29) if necessary

  (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

  (15/29) [END - 0.08] Configuration of CouchDB to use all cores

  (16/29) [END - 0.33 S] Configuration of the recording

  (17/29) [END - 0.52 S] Creation of users of the service if necessary

  Configuration of SSL infrastructure [START] (18/29)

  (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Total time: 4.13 seconds

  The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  20 September 15:50:41 Server servermgr_xcode [867]: response: {}

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  status = 1;

  }

  20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

  20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "FAILED: SSL infrastructure configuration ';

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  percentComplete = 54;

  status = FAILURE;

  }

  This article is interesting:

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Help to get the Xcode service backup and race would be much appreciated!

  I had this same problem. I typed in the following in the terminal:

  sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

  After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

• Install Snow Leopard Retail: Checking the Installation failed

  Hi all!

  I currently own a MacBook (mid-to-late 2010) with the identifier MacBook7, 1 and I want to reinstall 10.6 after a few questions. I got my retail disk, and it says that it cannot be installed on my computer. I check the logs and it says the following (not all that, only the errors, sorry)

  21-24 June at 20:18:03 localhost OSInstaller [140]: controls Installation failed.

  22-24 June at 20:18:03 localhost OSInstaller [140]: verification of the Installation failure:

  What puzzles me is that the reason is empty! Any help would be appreciated!

  (BTW, I tried to do a format, disc check and repair and all the "solutions" and none of them worked.)

  Sometimes the retail drives do not work if they are the same major version than the original installation disc provided with a computer. I just checked, but as the best I could with the information that you provide and it seems that your computer was shipped with 10.6.3 and this is the same version as the retail drives.  Yet, I wonder if there is a specific build characteristic which is absent in the commercial version.  Contact Apple support to get a replacement original disk.

• Skype installation failed; Code of 1632

  Im making a mistake like:

  Skype installation failed; Code of 1632
  The temp folder is on a drive that is full or is inaccessible. Free space on the disk, or else make sure you have persimission of Scripture on the Temp folder.

  I tried to use different POS and also I tried to install the .msi version but I get page not found error.please help me. I use windows 8.

  Try this:

  http://community.Skype.com/T5/Windows-desktop-client/help-need-a-way-to-run-Skype-w-o-install/m-p/38...

• DeskJet 3720: Driver Installation fails

  Base driver sw installation fails with the following error:

  Call to DriverPackageInstall returned error-536870329 for package ' < C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.inf

  Thanks PCalaminci. I got exactly the same error and same configuration (Win10 x 64 with bitlocker active). The solution is as PCalaminci suggests: temporarily disable the driver signature digital verfifaction (looks like HP delivered a driver with a valid Publisher unknown/no signature that is the cause of the installation of the bomb).

  Note: To temporarily disable checking of driver (on Windows 10) signing it is easier...

  1. In Windows, go to PC settings (you can search for it in the start menu).
  2. Click on 'update & recovery' on the left side.
  3. Click on "Recovery" on the left side.
  4. Click "Restart now" button under Advanced Boot.
  5. Select Troubleshooting-> advanced-> startup parameters and press Restart
  6. Press the number corresponding to the entry 7 "disable driver signature enforcement".
  7. Install the drivers. After your system restarts again once you won't able to install any unsigned drivers until you repeat steps 1-6.

  Above works even if you have your hard drive encrypted with bitlocker (you need not type in your recovery key).

• Satellite A300 - value added Package installation fails

  Hello

  I'm running a new Satellite A300, Vista Home Premium.
  I wasn't able to run PC-diagnose and volume button wasn't working so I uninstalled the existing extra value package, rebooted the system and tried to reinstall the latest version.

  The installation failed. I tried about four times with three newly uploaded files.

  Is there anything I can do to get the installation to complete?

  Thank you

  Dave

  Hello

  I'm not very well why you are not able to install the m VAP.
  I managed to install it.

  As mentioned, you should uninstall the old version, then download the new right version of the Toshiba page and run the exe.
  All that s

  In many cases these issues is NOT related to the applications that you are trying to install, but the Windows operating system. especially he confused s upwards and therefore this installation fails.

  In your case, I recommend you to clean the operating system using the CCleaner and if necessary to reinstall the operating system in order to solve this problem.

• Tecra A11 - VAP installation failed on Win 7 64 bit error 0x8146045B

  Hello

  I need help. The flash on my phone card tool was out of use. I downloaded the value added package in the 1.3.5 version and tried to install. Installation fail after having extracted the Exe file compressed with the error "Setup PVAT error. [0x8146045B] ". I thougt the error may occure while I not remove the installed software before. So I uninstall the value-added package. After reboot and without installation of value added new package the same error.

  How can I install value added package again?

  Tecra A11, Windows 7 64 bit

  Concerning
  TS

  Hi TSAGI,.

  I had a similar problem with the package of added value, so I also removed the previous version first. But after the reboot, I used the freeware CCleaner tool to clean the registry and delete the old keys of VAP. So just download CCleaner and run it, after this restart again and try to install VAP.

  Check this box!

• Skype installation failed; code 1632 on new disc

  Recently, one of my drives hard due is age, it was my drive "temp files" (which was not my main hard drive), after you remove the diskette and restart the Skype system did not work and there icon disappeared, since my main hard drive is small enough space (64 GB SSD) I do not bother to change the folder for temporary files and simply collapsed using the computer until I could get a new drive.

  Two days ago I had a new hard drive (2 TB, I've implemented 2 divides each 1 to and 'K' and 'L' system volume) I put the folder for temporary files on 'K:\tmp' and 'K:\temp', I'm sure that these folders work like temp files folders, other programs can write and read without any problem.

  http://3.1M.YT/N8DQSHh.PNG

  http://1.1M.YT/AQ4i5Ql.PNG

  And the drive pretty much free space:

  http://1.1M.YT/fxJV_fj.PNG

  Anyway when trying to install Skype I get the error message 1632:

  Skype installation failed; Code of 1632
  
  The Temp folder is on a drive that is full or inaccessible.
  Free space on the drive or verify that you have permission write to the Temp folder.

  I am sure that the drive/folder is accessible and is almost empty!

  I thought maybe it was because of the old installation is corrupted, so I tried unistalling it first, but I got exactly the same error when you try to uninstall! Then I proceeded to uninstall manually (remove the files manually, temporary files Skype roaming/program files/etc and deleted each registry entry associated with Skype manually), after this new attempt but still the same.

  -J' tried with the "SkypeSetup.exe", "SkypeSetupFull.exe", they both give me the same error 1632.

  -J' I tried it with the "SkypeSetup.msi", it gives me Error 2755. http://2.1M.YT/ubP0z2.PNG

  -J' googled tried many, everything what I found on the internet, but I still get the same.

  -L'exe 'extract and replace' the installer msi is not an option since I did not all the files associated with Skype.

  -J' tried to change the temporary files in "C:" folder and install but still the same.

  Some useful information:

  -Windows 7 (x 64)

  -Hard drive: SSD 64 GB in total, 5 ~ GB of free space, system volume "C:".

  -The hard drive temp file: 931 GB, 916 GB of free space, System total volume "K:" (new, total space 2 TB / two partitions)

  Please help me I don't know what to do anymore!

  Create a new folder on the partition of K.

  Download Skype.exe and SkypeResources.dll of the OneDrive site files and place these files in the new folder.

  https://onedrive.live.com/redir?RESID=DB6E69DD03D093C9%21180

  If you intend to communicate with users on Skype for business, then you must also the gtr 4... files.

  Create a desktop shortcut pointing to Skype.exe and tent now start Skype using this shortcut.

• Stack Bluetooth hang up Tecra S2

  Toshiba Tecra S2, PTS20E-18S032GR, 01/30/2006 purchase model number
  link to the description:
  HTTP://DE.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=DE&PRODUCT_ID= 106134 & DISC_MODEL = 0

  I have the problem, that the bluetooth Stack/Bluetooth Monitor (data "TosBtMng.exe") CPU-Auslastung of 97% by all other programming block and use all the system's performance.

  Here s screen Shoot.
  http://www.schreiterweb.de/t/tecra_15.jpg
  http://www.schreiterweb.de/t/tecra_16.jpg

  Hello

  I checked with my Tecra M1 but in my case, the mem usage is a little bit lower (5 468 K) and the CPU is 00. I put really know why this happen, but the fact is that in your case it on 100 active processes running. I work with my Tecra very intensively and did no more than 60.

  Back to the problem: have you tried to reduce the running process before enabling BT? Perhaps is there a resource conflict. Sorry but I have no other idea.

• LyncVDI.exe installation fails on the t610 with WES7

  I tried to install LyncVDI.EXE on a t610 with WES7.

  I have looged on administrator, disabled the filter entry and I just got a message "installation failed."

  Any hint to someone?

  You must ensure that your TEMP folders are not z:\temp.

  z:\Temp is a based RAMdrive folder and the RAMdrive is 32 MB by default.

  You can use a temporary folder on C: (for example, c:\temp), a network of road; a USB key.

  You can temporarily change the folder temp with the following commands in a Command. The EXE window:

  If not exist c:\temp\nul mkdir c:\temp

  Set temp = c:\temp

  the value of the tmp = c:\temp

  [PathToLyncvdi] \lyncvdi.exe

  If you want to use something other than c:\temp, change the commands accordingly.

  [PathToLyncVDI] should be replaced with its actual path.

  Tell me if it worked for you

• HP DeskJet 1512: DeskJet 1512 Installation fails with Windows 10

  I just updgaded my g7 HP Pavillion from Windows 7 to Windows 10 and I can not get my DeskJet 1512 to work.  I went to the HP site to shoot down the latest drivers from my drive for installtion of origin has no Windows 10 drivers on it.  Driver downloads, but the installation fails with the message: "the an installer for this device cannot perform the installation at this time."  I have administrator rights on my laptop, no one else is logged on, and I have no other applications running.  Any suggestions?

  Hey there John!

  Please try my suggestions and getting back to me. You can try downloading and running the print and Scan Doctor then choose "Difficulty of printing" and let it run its course. See what the end results you show here and then try again to print. Please also let me know what the results show.

  Try printing a few programs various (Notepad being one of them please) to see if the problem is with a single program, or all of them. Maybe a firewall can block the connection, try to leave this option off when you try to print from the few programs.

  Good luck! Enjoy your day