stair rail

Similar Questions

• Designjet T2500: Second star rail-Designjet T2500

  Hi guys.

  The second rail starwheel seems somewhat wheels, 2 or 4 off them, on the right side.

  Should it come like that? There is really no 2 or 4 littles wheels with springs bit?

  I tried to find a picture of him, but I couldn't find it.

  It is originally, paper jam institutionalized, tearing the paper. Seems to be the cause of it.

  Thank you.

  Hello

  I look to the T920, T1500, T2500

  They have not left, they have it on the right

• MacBook Air has fallen down the stairs and hit a wall

  I got my backpack open with my macbook to the inside and I was dragging down the stairs, not noticing that the Backpack was opened and at halfway down the stairs (about 3 steps down, carpet stairs), my macbook slipped on the backpack and fell down the stairs hit a wall.

  I rushed to my macbook, there was only a dent on the side but nothing major, I turned it on and everything is quite normal, login screen is correct...

  Everything seems fine, I just want to know if I need to check for any serious damage, may be for Apple... etc.

  I had great fear, I had dropped my macbook on carpet floor about 2 or 3 times, he fell on the wooden floor, there was no serious damage, there are a few bumps on the side, but nothing super serious.

  And once again; Everything seems fine, I just want to know if I need to check for any serious damage, may be for Apple... etc.

  If it was my computer, I certainly will consider to Apple.  Let them watch over and advise you how to proceed.

  I hope you have a good backup!

• Satellite A100 troubled Rail Simulator game loading EA

  I have a problem loading Rail Simulator of EA on my Satellite A100.

  In my first attempt, I got the message of free space, so set on removing unused programs and pictures on a CD burning.
  Soon released about 6.5 GB.
  Tried again, as much as to enter the key number and pressing return it just hangs. After about 20 seconds, the drive will stop. It's her!

  Lent the game to a friend with a vista PC and it runs very well.
  My player works for burning CDs, and I have loaded other programs using the player, just like a check. Everything is OK.

  Have you tried loading game using the remote from LG CD/DVD drive, but the result is the same.

  Used ccleaner to clean/check readers, all to nothing does not.

  Any suggestions?

  Thank you
  Steve

  Maybe this will solve the problem:

  1. go to start > run
  2. type regedit and press enter
  3. go to entVersion entVersion\Uninstall\
  4. in the last folder to UNINSTALL, you will find the key (folder): {0824EE6D-137F-4B83-9628-8E7B000BEBA6}
  5. this key should be removed. Then choose the key (blue mark) and press DELETE
  6. in addition to delete this folder: HKEY_LOCAL_MACHINE\SOFTWARE\Electronic Arts\Electronic Arts\Rail Simulator
  7 reboot the laptop and try again

• Dimensions screw rail SCXI-1001

  I don't know if this is the best place for this, but...

  I have some PCB custom this escape several SCXI-1130 modules in SCXI-1001 chassis connections.  Since I don't want the PCBS come A) loose, or B) cause of excessive fatigue on the module connector, I made a support to climb.  I want to connect on the rails of the SCXI chassis through the openings in the panels before modules.  To do this, I need appropriate screws.

  I think that the rails are M2.5, but I don't know (and I don't want to order and wait for the hardware, only to discover that I guessed wrong).  Can anyone confirm that the mounting on the SCXI-1001 chassis rails require screws m 2.5?

  Thank you

  Sean

  Sean,

  If you are referring to the screws that go on the front of the chassis and connect a card to the chassis don't SCREW M2.5X8MM, PHIL, PNHD, SS.

• Measurement of the current rail voltage > 10V

  Who am I to measure the current and voltage on a 15V supply rail.  (Here's a copy of my circuit attatched) I use an acquisition of data USB-6225 and Lab View,

  I have my camera to test connected to a power source. I connected two differential channels to the acquisition of data, one for the current and the other for the voltage.

  I understand that data acquisition is unable to manage more than 10V so I use a voltage halfway through the voltage divider. When I run the action, the indicated current is incorrect. It shows the 10A when it should be about 500 my.

  When I reduce the tension on the power supply 10V, it everything works fine, so I think that its got something to do with the limit of 10V.

  Please can you advise how I can connect that places correctly?

  Do it this way.

  

• NEITHER 9205 always returns the noise from rail to rail.

  Hi all

  I'm completely stumped on this one. I went through the procedure of implementation of the NI 9205 module in my project. Setting the channel to the appropriate type. Placed the node IO in my FPGA code, read and all I get is noise from rail to rail, that is, whatever the measurement range is, I'm getting noise across the range. I ran it as a measure of CSR, as a measure differential, differential with COM updated wrt my diet, differential with COM Earth and the mass of the chassis connected to my powersupply ground.

  Rail to rail noise ringing bells for anyone?

  I checked with an oscilloscope that the appropriate signal is seen on the pins in all the configurations above. I even unplugged and plugged a 3 v battery through the pines and still noise from rail to rail get.

  Help!

  HM, I used the 9205 before, but didn't have never seen something like this. I am more fan of data buffering in a FIFO, rather than reading a control value, but still, you shouldn't see this kind of securities for a reason that I don't see. I had problems with the modules where something is messed up and randomly, the signal will drop out then go back (in fact, I am about to send an or because it is still under warranty, but it's in a portable box, so I think that he may have had problems with shock or something of the sort). I wish I had a good answer for you, but you seem you know what you're doing, so it could be one of those cases where there is a hardware problem.  You have any other module HAVE you can share and see if those working in this niche? You can try it in a different location to maybe see there is a connection from bad backplane? You can also check if your local rep OR has a loan that they can indulge for a day, just to see if another 9205 works. Usually, these are the steps I take when I think that there may be a hardware problem. Unfortunately, except that I don't have a lot of input for you.

• Indian Rail Simulator

  Mr President.

  I ' am having microsoft train sumulator PC CD. How do we install Indian Rail Simulator?

   

  Hello

  ·        What happens when you try to install the game?

  Check out the link provided below for more information on installing the game:

  http://www.Microsoft.com/games/PC/TrainSim.aspx#sysreqs

  You can also ask your question on the Microsoft games forum, the link is provided below:

  http://forums.gamesforwindows.com/

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Rails development

  I just bought a canon MP-E 65mm macro lens, I checked online for different styles of rails focusing many to choose from. I need some info on what might work best for me, I seem to like the castel mini # Novoflex MFR. I have a canon 60 d and a canon T3I. Another topic, this is what would be a good software to buy for Focus stacking, once more a lot to draw from the line, and should I avoid free downloads, (Helicon Focus) and (combine ZM News) are some that I looked, from the videos I've watched that I need to know how to make stacking to get the best photos of macro. Need help on both issues. I always trusted the answers and comments, on the Canon Forum. Thank you all.

  I have two stages of development... One is an old Minolta. The other is a more modern Kirk. Both work well and are quite sturdy.

  I have used others, but not the Novoflex you mention. However, other Novoflex articles I used were always excellent.

  For macro work, I never seen the need for a development of the rails/stadiums having rear and side movement to another. Just backward.

  If you use a tripod head with a quick release of Arca Swiss type, it is possible to track the development of a 'poor', simply install a focal long extra plate on the bracket for the tripod lens. It can be slid forward and backward to focus. However, perhaps not enough precise for work with a ultra lens magnification as the MP-E 65 mm.

  Can't help a lot with the stacking of update software... I'm looking for one of these myself. From my own research, Helicon Focus seems the front runner.

  I also believe that there could be some features of the magic lantern software which can help... allowing the focus bracketing. Once again, it is just something that I start looking and have not yet been implemented. I don't know if ML can be used with the 60 d (but guess he can). I know that it can be used with both my 7Ds and 5DII.

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• x 230 update HDD to SSD - side rails?

  Hi all

  Just got my 230 x today and plans to replace the HARD drive with a Samsung 840pro.

  However looking Lenovo manuals, it seems that the HARD drive has rubber tracks and the solid state drive is supposed to have braces.

  How I get spacers type SSD, or can I use the rubber rails that are currently in the laptop?

  If I do not need them, how can I get them?  I can't find it on the list of accessories.

  @Lenovo: any official word on that?

  mike0112358 wrote:

  can I use the rubber rails that are currently in the laptop?

  Yes, it will work.

  See you soon,.

  Bill

• Rails for N3048 Kit

  After searching around the site of Dell and Google, I can not find this information.  Maybe I'm next to today, but someone can give me a link to and the part number for the rail kit correct for N3048 PowerConnect switches.  Specifically, they need to be mounted on two grids of post.

  Thank you

  Ralph

  I have listed for the rails kit is part number: MfgPart #8K3MP Dell SKU #770 - BBGY. I couldn't find it listed on the site of Dell accessories, but your sales representative should be able to get a quote on this part number.

  See you soon

• (Redirected) Kit rails for PowerEdge R220

  Hello

  I want to install Dell PowerEdge R220 if small locker (total depth 60 cm). Distance between vertical rails is unfortunately only 41cm (as you can see below image). Is there some original rails (rails kit) for R220 that adapts to these conditions.

  Thanks for the reply.

  

  Hi Punicz,

  Please repost this in the most expert servers support forum.

  http://en.community.Dell.com/support-forums/servers/

• Look for the rails to a Dell PowerEdge Rack Console KMM 15FP

  I picked up one of them, in pretty good condition considering its age.   It is the inner rail section.   but I need the rail segments that attach to the cabinet in order to mount it in.

  Anyone know where I can get these, or even what type of rail is necessary.

  Cheers.

  Kersonan,

  It seems that the rails for the KMM 15 kit is part # H1233, or according to your area, it may be CJ817.

  Let me know if it helps.

• Dell PowerEdge R410 sliding ready Rails - no connector CMA inside the rail

  Hello

  I have a second hand that came with Dell R410 sliding ready rails which is mounted in a rack in my 22u rack.  I just bought a new MAC for her, but I found that the outside rails have the ears to fix the MAC (and the support leg), the inner rails that the R410 attaches to did not sense that the arms attach.

  Is someone can confirm if the ready rails to the R410 have ears for the inner rail and if yes, someone has the part number?

  If anyone can take a picture of them if possible that would be great.

  See you soon,.

  Chris

  Bernos,

  Compatible track you talk is part # RGTK7 or P8N8P. Together, they will work with cable management arm, you discussed (part # NN006).

  P8N8p is shown below, as requested.

  

  Let me know if that clarifies things for you.

• HP5510 printer hung like a wireless network. How can I turn it go by laptop, on the stairs?

  I have a printer HP5510 hung like a wireless network.  How can I turn it go by laptop, on the stairs?  I always have to go upstairs % turn it on before printing wwill

  You can not, the printer must be turned on to make it work.