stand alone compact rio

Similar Questions

• Compact RIO NOR-9082 Configuration in MAX, cannot save

  Hello world

  I tried to implement a new cRIO the NOR-9082. Currently, I am able to see the cRIO under "Remote devices" in MAX configuration and view. However, the two errors that are produced:

  (1) when I try to change the setting as the host name and press 'save' a warning appears saying: "there was a problem, save the settings of the target. Make sure that your material is under tension and hat it is connected to the network. I have attached a picture below.

  (2) at the same time, when I try to install the software on the cRIO by double-clicking on 'software' and selecting "Add/Remove software" and run the Wizard "LabVIEW Real - Time Software", another error is displayed: "error: the disk hard n the remote system is complete or encountered an i/o error." I've also attached a picture below.

  The cRIO is lit with "DISABLE RT' toggled OFF. It is connected to the network via an Ethernet cable. This connection seems fine, however I look. (The connection of Ethernet port light flashes continuously activity indication etc..) It is the PC that is connected to the same network, I'm trying to interface with the cRIO. The cRIO displays the right IP address assigned through the network.

  My apologies if I have not provided enough information to solve this problem, but if someone might be able to explain why I could meet these two problems in these circumstances, assistance would be much appreciated. Thank you!

  It seems the main reason I got all these weird problems, it was because the compact RIO NI 9082 can come bundled with windows 7 and LabVIEW 2012 SP1 preinstalled and run as stand-alone computer so all I had to do was plug in a VGA to a screen and a mouse USB, keyboard and an eithernet for network connection cable and he started very well. Now, development and deployment happen locally on the cRIO. It was a little silly to me, so hope that helps someone!

  Kind regards

  Ago - Wei.

• I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

  I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

  Thank you

  Leroy

  Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

• How can I get Web sites to open in the stand-alone windows instead of all stacked in a single window?

  If I have a window open and click a link to open another, they pile up in one window instead of opening a new stand-alone window. How can I change this?

  Open options
  Tabs
  Top box uncheck the box which

• How to record a loop of garageband as a stand alone on my ipad pro?

  Once I recorded a song, I want to save it as a file of music stand alone and keep it on my iPad pro. How do I do that?

  If I try to export to iTunes, it is not found in my music application.

  Hi Marco_Polo,

  Thank you for using communities Support from Apple.

  I see you want to record a song that you created in GarageBand on your iPad.  I don't know what application you are trying to save it to, or if it is a ring, then I suggest that you look through the information provided in the link below for your different sharing options.

  Sharing GarageBand songs

  Have a good.

• I need to stop a download of the query, I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not who have, or want to buy.

  I need to stop a download of the query, that I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not have that, or I want to buy it.

  Motion IS a stand-alone application. It is mainly designed to make effects for Final Cut Pro X, but it is not necessary to have with FCPX nor is it necessary to have FCPX to create projects for other purposes. When you open the query, simply select project of work outside the FCPX motion. You can save regular projects of Motion anywhere on your system.

• NTP synchronization drop Linux Compact RIO

  Hello

  I followed this method of synchronization with NTP (https://decibel.ni.com/content/docs/DOC-39178) and it works most of the time, but sometimes, I lost the NTP synchronization and crio are about 7 s forward. (I get the problem with a 9035 and a 9068).

  When synchronization is no longer works, Pei ntpq command responds "connection refused".

  Does anyone have an idea about the problem?

  Thank you

  Hello Jacques,.

  Sorry, I wasn't very clear

  Before you add the ntp-utils, I lost the synchronization several times: sometimes after a few days, once, after more than 2 weeks, but also sometimes on startup, I was not able to sync

  Given that I have install ntp utils, 10 days earlier, on 5 compact rio, I run the of-p command ntpq every minute and I always get a response, then that means I never lost the NTP synchronization (or I lost it less than a minute). I will continue to monitor them, but it seems that ntp-utils has helped me as weel

  Concerning

  Kevin

• Problems with MAX tasks on different stand-alone

  Hallo!

  I have problems with my MAX-tasks and my V12 Dasylab on different stand-alone.

  I have 3 devices on the first PC.

  OR USB-6009 dev1

  NEITHER USB-6210 dev2

  NEITHER USB-6501 dev3

  Now, I had programmed a file Dasylab which uses the device 2 and device 3. Everythink worked fine. I exported my MAX configuration for unit 2 and unit 3 and imported on the second PC. But that Dasylab was not able to find the right tasks for my program on the second PC, even if MAX everythink that went well. The only solution was to delete all tasks and create them again. But then I tried to open the program stored on my first PC again and I had the same problem, Dasylab was not able to find the right tasks, only solution was to remove the stains and create them again. I tried to reset the configuration of my Dasylab with the "Synchronize with MAX-configuration" option, but it wasn't succsessful. DASYLab gave an errormessage, not mentioning not what exactly is the problem.

  Can anyone help?

  Thank you very much and have a nice day.

  Hilby

  Hallo Hilby,

  I think it can be more that can be solved on the Forum of NOR. I think you should contact your local dealer and ask for help directly.

• touchscreen compact Rio

  Hello world!

  I'm developing an application to control a cooler with Labview 2012 and Compact RIO. I would like to create a group of GUI to visualize data and a basic control.

  However, I would like to use a touchscreen to third party (not OR). Purchase the Labview Touch Panel module can I do?

  My question is: if it's just a screen and not a PC, simply by connecting to the RIO Compact RS232 port and launch of real-time application,

  It will allow me to control the VI?

  Thank you!

  I don't see why not.  You need to just make a protocol of good communications between your cRIO and computers touch screen.  I find a network stream to work very well.

• Emular / Simular Compact RIO

  Hay alguna manera trabajar o hacer simulando Québec tengo el RIO Compact the tests? Ocupo hacer unas secuencias, pero aun no tengo el RIO Compact how.

  Yo as recuerdo con las Renault suckers hacer tus VI y poner una virtual DAQ, is you can hacer algo parecido? o para trabajar con screw in Compact RIO is space forzosamente tenerlo how?

  MUCHAS gracias! Era justo lo than amazed!

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• Basis of LabVIEW Development with Compact RIO device software

  Hello.  Currently, I have the LabVIEW Base development software package and have been using it with DAQ Compact devices for the acquisition of basic data.  I would now like to start integrating controls in my system, changing to RIO Compact for deterministic real-time features.  My question is that I would be able to build applications for the Compact RIO system using only the basis of LabVIEW Development package without updating immediately?  Maybe some features are not available for me, but could at least get a good start like that?

  A CompactRIO embedded time real operating system (RTOS) called VxWorks you need to target the deployment of LabVIEW code to the device. Classic LabVIEW screws you will have been written so far are built to target general purpose operating systems (GPO) such as windows.

  To create screws that are deployable to STSOp, you will need the real-time Module that is not included in the basis of LabVIEW. As a result, to take advantage of the embedded FPGA, you'll need to install the LabVIEW FPGA Module as well.

  As long as you have the FPGA modules and in real time, it seems to me that you should be able to control these devices with LabVIEW Base. Without these software components you will not be able to create an instance of the device target your LabVIEW project.

• Stand-alone labview application (.exe file) does not run correctly

  Hi all

  I'm doing a labview application only to run on another computer (I never did this before).

  I went through the tools-> build application prompts and was able to build an exe file.

  the program is supposed to control a power meter and measures of power, then save them in a text file.

  When I run the exe, on the same computer, I compiled the exe, the program generates a text file to save data to, but he cannot communicate with the electricity meter.

  There are a few screws Sub and a dll file that are used to communicate with the electricity meter. Would it be possible that I am not say labview to correctly

  include these files when I create an executable?

  What are some common problems that arise when building stand alone applications that could be cause of my problems?

  And no one knows of any good tutorials on building applications stand alone in labview, other than the help files OR?

  Thanks for your help,

  Also, if you used the VISA, include the runtime with your Installer.

• binary and generations of stand alone files

  Hello: I have an application that is running in 2014 of LabView which creates and reads several tables 3D (25 X 8 X 6) to and from binary files. Works very well in the development environment. Problem is that now I need to create a (stand-alone) version for the client. Binary file functions do not seem to work. Any help or advice would be apprciated.

  Yes, a very common error is to save files with a path relative to the VI that saves the file. A more portable solution for no-LabVIEW files is to define paths to compared to the output of the function of the Application directory.

  In the development environment, it returns the path where the project file. In the executable file it returns the path where the executable.

  Mike...

• cRIO stand alone running

  Hello world

  I am beginner in LabVIEW and LabVIEW FPGA and RT. student internship that I work this month on FPGA project and my goal is to schedule a stand-alone on cRIO application.

  I got a CompactRIO 9002 with an AIO 9215 analog input module and use LabVIEW 13. This cRIO Gets an ethernet and a RS323 port.

  My request is to:-code FPGA by ethernet

  -acquire a signal input of the NI 9215 module

  -Send the data measured on a device (first on hyperterminal on PC and on an SD card or a storage device) by the port COM (RS232)

  My development was to: 1. create a new FPGA project

  2 code for the target FPGA vi and compile (InOut.vi)

  3 code another vi to run the cRIO from my computer (OpenCloseFPGA)

  At this stage, everything goes well and works and I followed the signal measured on OpenCloseFPGA.vi and my Pc Hyperterminal.

  Can I track this topic 'http://zone.ni.com/reference/en-XX/help/370622L-01/lvrthowto/rt_building_rt_app/' on the creation and deployment of a stand-alone application in real time. But my RT generated and deployed application nothing happens. I followed other tutorials on standalone RT but I still stuck...

  Could someone give me any tips or tutorials to help me?

  I found the solution, there is a mismatch and a mistake in my project.

  First, I use a cRIO 9002 and in building'step to unplugging it SSE2 option in "Advanced dialog box.

  See this topic.

  The second was a mistake from myself, I give an ethernet address to RT host that cannot run in a standalone application (wireless).

  Thank you for all your help.