Standard VGA driver does not load when reinstalling Windows XP

Reinstalled Windows XP on my computer, but he doesn't not load the driver VGA Standard - so I can't install the video driver ATI Radeon x 600 for my graphics card.

In Device Manager, it shows (in yellow) in the other devices section, "Video controller (VGA Compatible)".  I tried to update / install video driver with the Windows XP installation CD in the disc drive, but whenever he says, can not update material.  Whenever I start, the Found / installing the new hardware box arrives, but after a search, he finds no driver to install the video card.

Of which I did some research on the web, I need to load the Standard VGA driver before adding any other drivers (IE, ATI Radeon x 600 video driver) - but Windows XP does not say the driver VGA Standard of its installation disk.  Help!

I have not yet tried reinstalling Windows XP again, FYI.

Hi people,

You could try to remove the "video controller" in the section other devices in Device Manager, then restart the computer.

Who needs to be reinstalled card generic video driver.

However, if you have the correct video card driver, you should be able to reinstall this driver from Device Manager.

Right click on "Video controller" entry and go to the "updated driver software".

Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Dolby audio driver does not load after upgrade Windows 10

    Just upgraded to 10 Windows on my Ideapad N585. At the start, get a Dolby audio driver has not loaded. I recall this issue upgrade to win 8 to 8.1, but can't remember the fix. Should we wait for an updated driver? I have sound, but do not know what driver it uses. (have not yet found drivers yet)

    Another question, I discovered, is that I could not disable the touchpad through Fn + F6. The driver settings momentum have a box to disable the touchpad when an external pointing device using, however, so this isn't a major problem.

    Thanks - I think that I managed to update the driver for the device (which was not so easy to find) Manager - who or Windows Update done automatically. He now works properly again. I have a feeling I'm going to repeat this exercise a lot with Windows 10.

  • the digital camera driver does not load when a sony camera is connected to the computer vista laptop.

    At the same time the downloaded movies netflix has more audio.  Device Manager does not display a driver of the camera when the camera is attached via firewire and running?  I tried to reload the drivers and worked with the pilot web-based updates.

    Hi mstradt,

    1. which version of the operating system are you using 32-bit or 64-bit?

    2. What is the model of the camera number?

    3. you try to use the camera of Sony for the first time?

    4. How do you try to connect the camera?

    You can first try connect the camera with the different port and check if it is detected.

    Also try to use only Sony 4 firewire cable 4-pin to connect the camera.

    You can also visit the following links and see if it helps:

    Can what types of connections and digital video cameras be used to import video?

    http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

    Troubleshoot camera connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • driver does not load

    My TssT SH-S203N sata dvd rom driver does not load. He had worked.

    There is a top exclamation point in Device Manager

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

  • TPkd driver does not load

    At the start, driver TPkd does not load.  (A Windows driver?)

    Restart takes<3 min,="" startup="" takes="" 2hr45m,="" tried="" standby="" but="" it="" timed-out="" overnight="" and="" took="" nine="" hours="" to="">

    There are six other error records everything (same as & daily) "services could not start (3 files, 3 trails) in the 'hidden files and folders' - want to see?

    So, I did not have a restore date to come back because I have 'cleaned' too much.

    I don't know how to reload a Windows or a part of it even if I had a disc for this.

    Can you help me or do we not have to buy another computer?

    MBJ

    Hi JackandMiriamJenks,

    I suggest to start the computer in safe mode with network and try to download the update of the article mentioned.

    See the link below to start in safe mode:

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

     

    Update for Windows XP (KB926255) security

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=13220

    I hope this helps.

  • Flash does not load when you use the standard account in Windows 7

    I use the latest version of Flash on IE9 RC and on some sites, while that connected to Windows 7 (64-bit) as a standard user, does not Flash, but if I go to my Windows 7 Administrator account and go to the very site where the content Flash won't load, it does not load.

    It's Fancast.com on IE9 RC connected with my standard account of Windows 7:

    http://img695.imageshack.us/i/20110224093054.jpg/

    It's Fancast.com on IE9 RC connected with my Windows 7 admin account:

    http://img403.imageshack.us/i/20110224093021.jpg/

    I tried to uninstall and reinstall Flash and disabling hardware acceleration, but nothing happens.

    Flash sites like YouTube videos, no matter which account I'm connected to.

    Also, when I go to NESN.com on IE9 RC in standard mode, content Flash does not load: http://img684.imageshack.us/i/20110224092957.jpg/

    It started happening yesterday when I upgraded to Windows 7 (64-bit) SP1. I don't know if that has anything to do with it, but it was the last major change made to my system.

    Post edited by: A340-600 - Edit to add correct link.

    It's a matter of current Flash, here is your answer

    http://forums.Adobe.com/thread/729200?TSTART=0

  • Thunderbird does not load when open, even in safe mode

    When I open Thunderbird, it charge about 16 MB in RAM, and wedge. If I'm lucky, I can open Thunderbird using the Windows safe mode and safe mode of Thunderbird, run the program as administrator, but only once. Fail other attempts to open the program. I checked the parent.lock file and it does not exist unless Thunderbird is running. The user account is an administrator account, but the same thing happens with a standard account. Compatibility check says that the program is incompatible with any other suggestions. I tried to run under settings for Windows 7 and Vista with the same results. This happens before and after a profile import, omitting the extensions, a version of work using Mozbackup.

    All other programs are functioning normally.

    Acer SW5 - 012P type 2 in 1 computer, Windows 8.1 pro 32-bit, 64-bit based Atom, 4 core CPU with graphics Intel HD, Thunderbird 45.4, Kaspersky Security suite, installed from the same file that I used to work on a computer Windows 10 specifications similar.

    A dump is available from the Task Manager if necessary.

    The problem is cured but not resolved. Reinstall Windows by using an ISO from the Microsoft Web site restored normal operation of Thunderbird.

    I can only assume that something in the installation of Acer image was interfering with the loading, although Thunderbird (a number of different versions have been found) and Seamonkey mail were the only made programs. I thought I had deleted all the bloatware, but it is possible that something was still there.

  • Driver does not load correctly

    Some time previously, I've updated my HP Officejet 6480 all in one software and since then, the drivers do not load correctly.  Whenever I start my computer I get an error while loading programs are.  It is said that a driver has not loaded correctly.  I am running Windows 7 home.  It may have started when I upgraded to Windows 7, 64-bit XP and loaded the new software from the HP website.  I don't remember exactly.  Today I tried to send a fax from the solution Center and found that the "Send a fax" button is irrelevant.  Since I am able to send faxes from the buttons on the front panel on the printrer, I guess that the driver does not properly is the fax driver.  All other functions work.  I uninstalled the software from the control panel in Windows 7 and downloaded and reinstalled the software several times without success to resolve this problem.  Any ideas how I can fix this problem?  Thank you.

    Hi Dave46a,

    Welcome to the HP Forums!

    I see that you have trouble to install your HP Officejet 6480 to your Windows 7 PC.

    I would try the following:

    1.) use Microsoft Fix It to uninstall the software. Select Windows, click on install or upgrade software or hardware, click on install or remove programs, and then click Run now next to correct problems that programs cannot be installed or uninstalled. (Use this to remove the printing software).

    2.) try using the printer HP install wizard for Windows for the re - install.

    (3.) to run the HP print and Scan Doctor to see if other errors occur.

    Hope this helps and have a nice day.

  • Windows Media driver does not load code 10?

    anyone has this problem

    Hello

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

  • HP DV7 - 6C95DX Intel Centrino Wireless N + WiMAX 6150 driver does not load

    Hi all

    Just bought the laptop today and did a fresh install of Windows 7 Pro 64 bit. Everything is OK except the wireless Intel Centrino N + WiMAX 6150 driver will not load. All the other drivers loaded without any problems. I downloaded the driver from the website of th HP, I have download the driver in the Intel site and always used to install.  It's very strange because when I run the driver from the Intel site, it has finished installing, but in Device Manager, I always get a "!" mark next to the device. My wireless adapter works it is what I use now to connect to internet.

    I even tried unnistalling Intel PROSet/Wireless WiFi software and re - install it and still the only one who does not install properly is the "Intel Centrino Wireless - N 6150" and "Microsoft Virtual WiFi Miniport Adapter" and the "Microsoft Virtual WiFi Miniport Adapter #2".»

    Can anyone help me, it bothers the heck out of me.

    Thanks in advance

    Here is the driver [content deleted]

  • Tek TDS2014 driver does not load as a reference vb6.0

    Downloaded the latest version of the pilot site TDS2014 NOR (ver 2.7.1) and it seems that there are no typotheque so it does not load as a reference in VB6.0.

    I had an older version (2.0.9 dated 2006) which was able to load as a reference but started having problems with it after the NI-VISA 4.5.

    First, is there a library of types available for this driver I'm somehow missing or is there the intention to support VB6 on the new driver (at this point, I'm not wan't to create based on the .h file)? Otherwise, there are the old versions available with a type library that I can get to try?

    If I can't help with that, the real problem I had with the old driver after upgrade of VISA is that I can not put the Horizontal attribute to time Record to 1usec with the driver tktds1k2k_ConfigureAcquisitionRecord function (corresponds to a setting of the scope of the 100nsec/div). All other settings seem to work, here's the log of NOR-SPY for setting 100nsec/div:

    viPrintf (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HORthe % EC")
    Formatting viWrite (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HOREC: .000000e-08 ', 20, 20)

    Note the value sent in HOREC order is damaged, must be 1.000000e - 07

    Here is SPY for the work of setting 250nsec/div:

    viPrintf (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HORthe % EC")
    Formatting viWrite (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HOREC 2.500000e - 07 ', 20, 20)

    Because it worked before upgrade VISA that I was trying to exclude imcompatability problem with former driver. Are there known bugs 4.5 VISA who will account for this? Also, I am able to put 100nsec/div with VISA sign using the SCPI command, so the question is not in the scope.

    My last config is:

    Windows XP

    NI-VISA 4.5

    NOR-IVI 3.3

    tktds1k2k_32.dll ver 2.7.1

    For now, I'll try using WriteInstrData and send SCPI directly as a workaround.

    We will publish the updated driver (2.7.2) to focus on the problem of type library. Please let us know if you still have questions.

  • Page of the trial does not load when I connect

    When you go buy or try hiking, it leads to a wherwhy page or want to try Photoshop and things and ask you to log in. I log in, and it goes to the next page, which is just a white screen empty except for the bottom, where it has a tongue setings and other things. The page does not load and I can't get it to the trial. I tried two different browsers, chrome, and firefox.

    Screenshot 2015-10-27 13:46:00.png

    When I go to that page, select experience and click then the next page wants to launch an external application.

    You can't do that. You can download the installer directly instead. Here is the link. Don't forget to follow the download instructions on the other will be refused. 2015 Direct download links adobe CC: creative Cloud 2015 Release | ProDesignTools

    Here what Chrome tells me the link you posted. The thing about adobe does not charge or is blocked on the machine you.

  • My Home Page does not load when Firefox starts

    Since the Firfox 18 update, my home page does not load at startup. I have Windows 7 please notify

    Great, thanks it is an extension that was added without my account had been done - for anyone else having this problem, the extension was for Grammarly - grammar checker!

  • The last tab, further to the right, does not load when you restart FireFox.

    Whenever I restart firefox, the last tab that I had opened does not load. The issue of restarting can be any: add new installed firefox, new update, restart the browser manually, or restart my computer for firefox automatically closes. It's always the same problem. The last tab appears, as my page, new tab, which is empty. I have 3 tabs open and the first 2 will load fine, but not the last. This means that if I restart for an add-on or something, I need to return to my story to go back the last tab, which is annoying. And it may not have been my most recent tab. I can open this last tab, go back to the tab previous surfing the web on this subject, my story of the building and then restart firefox for some reason any. In these cases, I need to open the history window and dig for the last tab of the memory.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the start safe mode window or make changes.
  • handycam sony USB driver does not load

    I have a vista and xp systems I also have a handycam sony usb drivers work on xp but not on vista. If I have win7 I will be able to use my handycam dcr-trv250 of usb?... .drivers does not load...

    anyone can answer this question? I don't want to waste money, but if I win 7 I'll be able to do my work equipment? or will I be able to load my drivers to use? can someone make me to * address email is removed from the privacy * thank you for your time.

    http://eSupport.Sony.com/

    You will need to check with Sony to see if they have Windows 7 drivers available for your model HandyCam.

    Sony has written drivers for their products, not Microsoft.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 Hardware/Software Compatibility Center.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to / stationed there.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • required VGA hw to run youcam

    Dear Sir. I have a problem when executing youcam... its says you need vga hw to run this... laptop Model::HP2000 no::E4X59PA #ACJ Prod

  • Why the execution engine is necessary?

    Hello I want to know what is the LabVIEW runtime engine exactly? Is whay required? What exactly is its role? Where can I find the answers to these questions? I searched this site, but could not locate a single document . Thank you!

  • Will there be security of Microsoft (or any other company) programs that actually work?

    I'm currently under Windows Vista Home Premium, Service Pack 2 on a Dell Studio 450, 64 bit OS, 4 GB of RAM.  For security, I have the full licensed version of McAfee (including firewalls, anti-Spam, Phishing, & scanning in real time, by email, onlin

  • update windows 07 to 8.1

    Dear Sir/Madam, I'm Veerendra Dasari, I was using windows 07 and want to update 8.1 now I don't have updates about 8.1, so I decided to update online by assistance provided by the official page of windows upgrade or installation 7 files offline. If m

  • Tax operating unit and AR credit note

    Hi allCan anyone tell me please where to find any setup in Navision Financials of R12 which connects AR credit tax memo with the operating unit and or legal person.An urgent need.Concerning