Standby and Active Power mode consumption

Similar Questions

• E120: high power mode consumption standby

  Hello, I am new to lenovo. I have thinkpad edge e120, and there is my second question:

  When I turn on the computer in mode 'sleep' Windows, it works very well. but after a few hours (8-10) in standby mode, the battery is low or empty. my friend's macbook air and it may be in mode 'sleep' (or something like that - after the opening of the computer, the system works in seconds) for days, perhaps weeks. is this normal? I don't want to use the "hibernation" mode because it is lsow, it takes tens of seconds to the ready state. (it's faster than "full" windows startup, which takes the cca 1.5 minutes, but still slow). Maybe I need to configure something in the bios or elsewhere?

  Thanks for the ideas...

  Thank you for help but the manager upgrade of power has not helped me.

  but I've partly solved the problem:

  Disable in the bios "always on" usb port (for charging the mobile phone or mp3 player etc. via USB mode 'sleep'). and now the battery is empty after 2 or 3 days not hours (weird - I do not have any device on the usb port - so nothing is charged) and it's much better.

  but I thought, it would be at least of the week

• Activate App stuck on waiting and power Mode low does ' t

  Hi all

  I have at least two concurrent problems with my iPhone 6 + iOS 10.0.2 (but started with iOS 9).

  I can't install new application directly from the App Store on the phone because they were stuck in the phase of "pending". Same behavior of update of the applications that are already installed.

  The only way to update/install the app's iTunes download and synchronize.

  The other simultaneous problem is in what regards the activation of "low power mode" with the rocker switch (settings > farm > Low Power). Whenever I try to activate (manual or automatic 20% of battery) function, the gray toggle becoming in the Middle, then return to the OFF position.

  I already have backupped & restored several times, but nothing has changed.

  How can I solve this?

  Thank your

  Best regards

  Hello Axoduss,

  Thanks for posting in the communities of Support from Apple. I see that you have two problems. One is that the low power Mode is not activated, and the other is that updates and new applications are blocked pending. I know that I rely on my iPhone for everything. It is important to ensure that it works as expected. I'll be more than happy to help.

  Great job to the backup of your phone and restore. It's a great way to help solve these issues.

  If you are restoring from a backup, the problem may be in the back upward. I recommend to reset the phone to factory settings and set up like new to see if the Mode low power and installing apps works. If this does not work after the installation in the new and not after the restoration then you want to restore your data manually and not market back. Here is an article on setting up the phone as new:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Let us know if that helps.

  Take care!

• Problems with Windows 10 screen standby and sleep mode

  After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode.  When the computer turns off, he doesn't have the bright screen.

  After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:

  • > Power LED remains lit after stopping
  • > Computer enters standby or hibernation.

  HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.

  See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?

• RMAN duplicate for standby the active database and the missing data files

  We have a car of 2 node ASM 11 GR 2 and 11.1 of database and a standby with ASM also. Our database is relatively low (300 GB)

  and in one recent event the day before was such a departure from the primary that we decided to "repopulate" the data using duplicate RMAN.

  I deleted the data files of the previous day and followed the Oracle documentation to duplicate a database. In the waiting

  I created a static listener and a pfile containing only the essential information (db_unique_name). I started the day before with nomount using the 'empty' pfile.

  I run RMAN, connected to the target and ancillary catalogues and run this command:

  run {
  allocate channel prmy1 type disk;
  allocate channel prmy2 type disk;
  allocate channel prmy3 type disk;
  allocate channel prmy4 type disk;
  allocate channel prmy5 type disk;
  allocate auxiliary channel stby1 type disk;
  duplicate target database for standby from active database nofilenamecheck;
  }
  

  RMAN duplication completed without errors, so I started the rescue database and got

  an error saying that datafile XXX is missing. I checked XXX datafile at the primary level

  and it is in a DISCONNECTED state. In the standby database the same data file is in the online state.

  So I think the problem is that during the duplication, RMAN (as documentation States) does not work

  Copy the files of data in offline mode, but the standby control file seem to think that these data files

  are online and should be present.

  Can someone please help me solve this problem? From my understanding, I could just copy the missing persons

  data files (there are many however) and in the standby go offline, but I don't think it's

  the right solution, edit this file for control of the standby? I would add another option

  in the RMAN script?

  Take the data file in offline mode on the site of the previous day.

  I don't think that two COPIES try to manage separately offline files.

  Hemant K Collette

• I'm having a holiday in Nha Trang, Viet Nam and my stolen obtained iphone6 10:00-22:30 last night, I activated lost mode which is still pending and said the local police. What should I do?

  I'm having a holiday in Nha Trang, Viet Nam and my iphone6 who was in my bag got stolen 10:00-22:30 last night while returning to the hotel, I activated lost mode which is still pending and said the local police. find my iPhone is in offline mode. What should I do? I read online that if I erase all my data can find that my iphone will be more capable. I also read online that the stolen iphone can be replaced? What should I do? I can't fnd an e-mail to contact apple Australia I did purchase in Sydney Australia.

  Please help me.

  There is nothing for you to do.

  What to do if your iDevice is lost or stolen

  iPhone, iPod Touch and iPad

  If enable you find my phone before it was lost or stolen, you can follow only if it is connected to the Internet by Wi - Fi or cellular. What you can't do, is follow your device using a serial number or other identification number. You can't wait for Apple or anyone else to find your device for you. You can't recover your loss unless you make your device for the loss. It is not covered by your warranty.

  If your iPhone, iPod, iPod Touch, or iPad is lost or stolen, what do you do? There are things you should have done in advance - until you have lost it or it has been stolen - and things to do after the fact. Here are a few suggestions:

  This link, Re: help! I misplaced / lost my iPhone 5 today morning at delta Chelsea hotel downtown one I am not able to follow. Please help!, has some good advice about your options when your iDevice is lost or stolen.

  1. declaration of a lost or stolen Apple product

  2 find my lost iPod Touch

  3. AT & t. Sprint and Verizon can block phones stolen/tablets

  4. What-To-Do-When-Iphone-Is-Stolen

  5. use ICloud Mode lost

  6. what to do if your iOS device is lost or stolen

  7 6 ways to track and recover your lost/stolen iPhone

  8. find my iPhone

  9 report Stolen iPad | Stolen lost found online

  It pays to be proactive in following the advice on the use of find my phone before you lose your device:

  1. find my iPhone

  2 set up your iDevice oniCloud

  3. OS X Lion/Mountain Lion - in regard to my Mac

  4 the free configuration find your iPhone (even on unsupporteddevices)

• screen standby and sleep mode

  When the screen saver comes on, the back ground stays on too, it's just background or a Web page.  Also when I want to sleep, the screen will turn black, but the computer will not sleep.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• SGE2010 and SRW2008: power consumption and noise level?

  Hello!

  I am looking for information on the actual noise level and power consuption produced by the above mentioned models.

  Many thanks in advance,

  Luca

  Luca,

  Consumption of energy and other attributes of physical products keys in the next document (in the documents section of this community):

  https://www.myciscocommunity.com/docs/doc-8669

  WRT to noise levels, they are here:

  SGE2010 - dB 51.4

  SRW2008 - N/A - there is no fan inside this switch - use and external power supply

  Thank you

  Ivor

• Active power Nap

  With active Power Nap, with El Capitan 10.11.5 iMac

  With it a feature to check for new messages; Does this mean that Apple mail must be open so that it works even if the computer is in "standby", and what other things NAP can do?

  Hi Neon3214,

  Should mail, in fact, be open for the NAP to the arrival of new messages while your Mac is asleep. For more information about the features provided by Power Nap, see article below.

  • Mail, Notes, Contacts, calendar, reminders, photo stream, find my Mac and iCloud documents are checked hourly. To receive updates during NAP time, Mail and Notes must be open before your Mac beds.

  How Power Nap works on your Mac
  https://support.Apple.com/en-us/HT204032

  Sincerely

• Auto standby and sleep

  My system wakes up hours even after being put on standby, and then back to mode 'sleep' in itself.

  This happens when I wake up to go to the bathroom in the middle of the night. When I get to a certain place in the hallway, I hear the 'click' in my computer room that occurs subsequently to the top. Then I change course to control the computer and I find it wakes up. He will then go back to sleep in a few minutes. Either it's haunted to wake up when I do (it seems to wake up when I get to a specific place in the hallway (*?), or he wakes up frequently while I'm asleep.)

  Any way to prevent it to wake up or get a log of his self-directed behavior?

  Try disabling "Wake for network access" and "Enable Power Nap" in system preferences > energy saver.

• Setup Active Power Scheme for energy saving by program

  Hello

  I am a software developer and I would like to create a small utility for myself which can change and set the active power for Toshiba Power Saver utility mode.

  There is a function of Platform SDKs 'SetActivePwrScheme' to do a similar thing

  http://msdn.Microsoft.com/library/en-us/power/base/setactivepwrscheme.asp

  but it works for windows only, builtin power plans not for Toshiba Power saver.

  Is it possible to put the active scheme of the Toshiba Power Saver utility?

  Thanks for the advice in advance:

  Kazi

  Hi Kay

  This is a forum for users and users of the community try to solve common problems, share their knowledge and discuss technology.
  I'm not sure that you will find an answer to your question here in the forum. It is more a question for programmers.

  In addition I don't think you'll find any saving code details. I think that these internal and non-accessible information for everyone.

• Standby and Hibernation are not working

  I got my laptop from my college. It was a v7 Aspire 481p with 8 pre-installed windows. I wanted to install linux and the system has failed because of the "Secure Boot" functionality in the UEFI Bios. So I went in "Legacy" mode Now, the system is not started. I had a Windows 8.1 so I used it to start my system using a Bootable usb key with the bios in "legacy" mode

  8.1 windows successfully installed. Use the key that I had extracted from windows 8 using software "produkey" after installing windows 8.1. And 8.1 of windows has been activated. The system has 500 GB HDD + 23 GB SSD. Now, it's almost works very well and the bios is in "Legacy" Mode I have not yet installed linux. At the time current Backed up all my data on an external HARD drive.

  It is:

  
  I installed some drivers I downloaded at acer for windows 8.1. The problem is that the system does not properly in mode 'sleep' and in hibernation mode. In both cases, the screen turns off leaving power on the system. 

  Here are the screenshots of the list of the installed software before and after:

  Front (with UEFI Bios, windows 8)

  

  After that, now (present condition)

  

  The system is still in ' traditional '.

  Apparently, I have installed some drivers because I thought they might not be important, but I'm going to install all drivers and system software in the screenshot before.

  Help me, I would like to know where I am going wrong. I also want to install linux and UEFI with secure boot doesnot allow.

  Also let me know is to "legacy" mode has drawbacks. Speed of the system was unaffected much after the change in legacy mode in the bios.

  Expecting a quicker response.

  Thank you.

  Hello...

• XP is unable to complete the loading and the power of travel.

  XP is unable to complete the loading and the power of travel. It will restart in Mode safe with no problems and then restart to normal safe mode. All programs and everything seem to work OK. CHKDSK/r was run from the installation disk and indicates disk errors have been corrected. Restart the hibernation or standby also works. Ntbtlog.txt is still crushed by the boot of good last and there is no help. It's very long and repeat the load lines and has-no-charge several times! Any ideas what to watch?

  I have lived with this for a few months and reinstalled XP and then new service Pack 3. Nothing done until this difference

  Hmmm...

  NVIDIA drivers are definitely outdated.

  If the system just stops (literally goes off), I suppose a marginal connection inside, an out-of-date driver or a heat problem.

  You can carefully and without requiring too much force, remove one reinstall all you cable and connection inside including your RAM and all other devices installed just do one thing at the time, so you don't mix.  One thing at a time... Unplug it and plug it in again.

  If she runs in Mode safe, your it would mean that the system uses the default XP video drivers (that is why everything is so GREAT in Mode safe).

  When you start normally and will charge drivers NVIDIA, things will run more hot.  Will increase the time on the CPU and video card.  Make sure that all your fans are running, and the system is properly ventilated and ventilated.

  If the CPU or processor on the video card is a problem of heat it just stop - no warning, no newspaper, no nothing.  Cool that turned off for awhile and it could work again for a bit.

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  You must be on the 275.33 version and you are now on 178.13 (from you given msinfo).

  6.14.11.7813 driver version<---- nvidia="" version="" 178.13="" from="">

  Your msinfo32, video section should look like this when you are finished:

  6.14.12.7533 driver version<--- the="" latest="" nvidia="" version="">

• What is active/active and active/passive

  Hi all

  What is the difference between active/active and active/passive in the configuration of the DR?

  What are the advantages and disadvantages?

  Please suggest entries to learn more. Provide also available documents.

  Thanks in advance.

  Kind regards

  Krish

  Probably, you want to know the benefits of active dataguard and dataguard 'normal '.

  With active dataguard relief database can be opened read-only, and updates are applied to the primary real-time.

  With normal dataguard the standby database is installed and update are applied but if you open the database in read-only mode, no updates will be applied.  You must put the database in managed for updates to apply recovery mode.

  Clearly, the advantage is that you can use the database Eve with active dataguard for various purposes such as reporting in real time.

  However, active dataguard is an option under license and do not pay for it.

  http://www.Oracle.com/technetwork/database/Enterprise-Edition/Overview/Active-Data-Guard-11g-datasheet-1-134534.PDF

• Low power mode will affect the performance of the camera?

  I take my iPhone 6 on a trip backpack my camera. I intend to put the phone in airplane mode and I wonder if I should also set low power mode. If I put it in low power mode, it will reduce the performance of the camera?

  I suggest that you test this configuration by yourself before you leave.

  You can also consider taking the external battery back up like those manufactured by mophie.