Standby/hibernation for lack of

Hi all

I have trouble with the sleep and hibernate on my Dell Inspiron 3537. If I said to hibernate the computer shuts down remarkably quickly. Then when I go to recovery from hibernation just TI hangs on a black screen until I forced the closing down, or it starts fresh.

Research in the event viewer I get messages like:

  • Windows to not resume from Hibernate with error status 0 xC0000001.
  • The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000113 (0 x 0000000000000017, 0xffffe0015bc7a010, 0 x 0000000000000000, 0 x 0000000000000000).

and

  • The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

Any ideas on how to combat it? He is fresh out of the factory last week while all drivers must be up to date. Any help would be greatly appreciated.

See you soon,.
Dave

Yes! I had it there at the end fortunately. First of all, I reinstalled the 8670 M AMD Radeon HD driver. This then leads to Windows does not video drivers the next time I booted up, but I was suddenly able to Hibernate and sleep freely. Then I reinstalled the driver AMD again, and suddenly I could not hibernate/sleep. Then, I installed the driver Intel HD Graphics 4400 Driver from the Dell support site. He warned me I was overwhelming a driver more recent but went ahead in any case.

Windows Update is now Throbbing on my outdated driver, but I'm not enough game to try to update later. I can sleep and Hibernate to my heart's content once more

Tags: Dell Laptop

Similar Questions

  • Satellite M30X-111 wake up from standby/hibernation mode

    People, like many of you, I had the questionable connection DC problem and I solved this at the time of re - solder the wandering joint on the connector for the motherboard.

    Everything was fine with the laptop until yesterday when I tried to get the machine to wake from standby / hibernation if it is when you close the screen) and now all that happens is that the blue light around the power button lights up, the CPU fan runs for about 5 seconds, the HARD drive light flashes once Maybe two times and the DVD briefly climb towers.

    Also nothing happens... the screen is blank and the laptop is actually not from the occasional maelstrom of the fan.

    Is it in any case to perform a reset of some sort to get it to snap it on hibernation? I have read up on this subject on various forums and have tried to start without memory, without the HARD drive and the DVD drive and still no life.

    Any input is appreciated that I need this laptop to spring into life again.

    Thanks in advance

    Ground

    Hello

    to wake up the machine, simply remove the battery and the AC and leave the machine for a few hours. After that, it should work again.
    By the way: sometimes it s a good idea to do a biosupdate, because maybe the problem comes from the bios.

    Please give some comments about your success... :)

    Welcome them

  • Satellite U300-144 does not come from the standby/hibernation mode

    Hi, can anyone help?

    I have a new Satellite U300-144 accompanying the Vista home 32-bit preinstallation. I have a problem, he wants to come to the sleep/hibernation mode, and my clear blue power is always on standby/hibernation mode. I hold the power button to restart the computer and then I get a message of illegal closure because I don t shutdown right.

    I tried to upgrade the BIOS later for my model and the n t the problem, then I tried to upgrade to Vista Ultimate t doesn't help either. I installed all the drivers and everything works real well.

    A colleague using me U300 Office. I asked him to check the extended sleep/standby option and he reported that everything works correctly. He always uses the factory settings and only one update is added value package. He kidnapped the former and installed latest version of the Toshiba download page.

    Have you installed latest PPVS too?

  • Re: Not possible to enter sleep/standby extended - standby/hibernation is not allowed now

    No matter what method I use to try to switch to Stanby or hibernation mode, a prompt indicating "standby/hibernation is not allowed now" appears.

    For example, this happens when I go through start-> shut down the computer, or when I close the lid of my computer that I put to sleep mode.

    Help, please! Thank you!

    Hello

    First of al I'd like to know what model of laptop you have.
    Then it is possible that the Hibernate mode.

    Please check the settings if Toshiba Power Saver was installed on the laptop to save energy, and then check the settings there.
    Otherwise, you must check the power Windows Option in the control panel

    See you soon

  • Auto erasing in pro SSD comes from standby/hibernation mod.

    Hallo! Help me)

    I'm on macbook pro 13 "2011 i5. So I bought ssd to upgrade my mac. These are the 128 GB plextor m6pro. I cloned all the disk system ssd. Also I bought optibay, I broke my hard drive cable, so now the whole system works on optibay and ssd (without hard drive).

    I have a serious problem. When I close the macbook and then open after a few minutes my system begins to work is not properly so I click on system reboot and Flash then folder with the question. I like this for 4 times, other times just system opens when I opened my macbook. Then I go to the internet-> disk utility boot and see this ssd is completely erased, no partition! I don't really know what to do.

    It seems that he connects with optibay because it uses cd, mode standby/hibernation and sessions.

    Please help me! =)

    I forgot to add, all the time, I used trimforce enabled, unless it's necessary information. Hope someone could help me.

  • Keyboard gives erroneous characters of standby / hibernation

    Dear all,

    I have an Acer Aspire V5-471. It is fully updated with Windows8.1 and all the MS later updates.

    The problem is that sometimes when the computer from sleep / hibernate mode, the keys to generate incorrect characters. It is a major problem when trying to enter my password to logon.

    I thought it might be a hardware or driver problem and checked the keys and uninstalled/reinstalled drivers, all to nothing does not.

    I then connected with another account and worked well, I created for the first account and who then worked fine until I put the computer to sleep (lid closed). When it happened again, I just changed my user, switched back and it's OK even once in the first count.

    So it seems to enter the mode standby/hibernation somehow corrupts a keyboard user account assignment.

    Has anyone else had this problem? I searched the site and cannot find all similar occurrences.

    Thank you

    Chas.

    No he never had this problem until recently.

    I found this article from a search:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-w...

    Seems to be a problem in microsoft with keyboards.

    If I try to open a session that get incorrect password.

    I click on the back of the switch user screen then click on my login information and can connect OK, it seems when the computer from standby the brining, the KB is considered to be bad for the hotmail account, go to user switching screen seems correct.

    I'll try the proposed to the last SYSTEM RESTORE and see if that fix it.

  • Running back from standby/hibernation program

    Hey there,
    I want to launch a program every time I come back/sign my computer after the standby/hibernation mode. I only found a possibility to play sounds of a logon each time that this happens, but I can't run programs like that. Is it possible to do it on Vista?

    PS: If it isn't, can you send this request apparently simple functionality to the Windows 7 development team?

    While the mark's instructions look as if they will work, there is a more elegant way to achieve, using Vista built in Task Scheduler.

    To create a task that runs whenever you unlock your profile:
    1 open the Task Scheduler [start > Panel > system and Maintenance > administrative tools > Task Scheduler (or just type "Task Scheduler" in the box start search)]. You will need an administrator account/password for access to this.
    2. Select "Create a task" to create a new task.
    3. a panel with several tabs will open.
    4. fill the 'Général' tab to meet your needs.
    5. go to the "Triggers" tab and choose "new". Another panel will open. At the top of this Panel, you will see a (see below). Open it and choose ' to unlock the workstation. Then choose if you want this task to run just for your profile or for everyone. Click on 'ok '. (You can find it useful to use the option "Delay task" to delay the task for 15-30 seconds to give your office a chance to load before the program runs.)
     
    6. go to the Actions tab, select 'New', choose 'Run program' and locate the program you want to run.
    7. Select the tabs 'Conditions' & 'Settings', respectively and change various settings according to your needs. (Make sure that the "Run on AC Only" option is disabled if you are using a laptop and want the task to run when it is unplugged).
    8. click OK to save your new task.
    Now, whenever you unlock your profile after the standby or Hibernate mode, your program runs.
    If you follow these instructions, but choose "connection to" rather than "To unlock the workstation", your task will run whenever you connect (unlock and logon are not the same thing as the computer is concerned, so keep that in mind).
    This may not work if your profile is not protected by a password, but all mine, so I couldn't test it in this situation.
    I hope this will satisfy your needs.
    Best wishes
    BookwormDragon
  • How to disable the standby/Hibernation on series Satellite Pro U mode

    Hello
    I have on my Satellite Pro U installed Windows Vista professional series.

    During the defragmentationprocess my machine automatically goes to sleep.
    Does anyone know how to disable temporarily on hold, the defragmentation process can be completed successfully.

    Published by: Admin on December 1st, 2007 08:13

    Hello

    to disable the standby/Hibernation mode on your system, you should just go to "Control Panel" and open 'powersaver' to change settings powersaver.

    The Powersaver contains profiles where powersaving all associates are defined parameters. You can change this profile and disable the sleep/hibernation mode to perform your defragmentation.

    It would help if you post what system you have...

    Greetings

  • How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

    I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

    I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

    However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
    I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

    Any help would be greatly appreciated!

    This gives a test:

    1. click on START
    2. click on 'run '.
    3 type "notepad" (without the quotes) and press enter
    4. copy and paste this into Notepad:

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
    "USBBIOSHACKS" = DWORD: 00000000
    "USBBIOSx" = DWORD: 00000000

    5. click on file > save as
    6. change the dropdown to "all files".
    7 type usb.reg as the file name and save the file somewhere easy to access
    8 go find the file and double click it. Confirm that you want to add it to the registry
    9 restart the computer and see if you can wake the system from standby mode

    For reference, take a look at this:
    http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

    Let us know,

    Thank you!

    Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • my laptop keeps going mode hibernation for no reason

    my laptop keeps going mode hibernation for no reason

    Hi Alanbyrne1982,

    Welcome and thank you for viewing on the Microsoft Answers community forum.

    It seems that the Hibernate your computer option is turned on. To resolve this problem, I recommend you to follow the steps mentioned in the link mentioned to turn off the hibernation below feature.

    How to disable and re-enable hibernation on a computer that is running Windows Vista:

    http://support.Microsoft.com/kb/920730

    In addition, mentioned below are instructions to change power options where the computer goes to sleep instead of hibernation.

    http://windowshelp.microsoft.com/Windows/en-US/Help/495c2226-19f1-49eb-9fd8-6dd7f2c0b49e1033.mspx.

    Please try these and keep us updated on the status.

    Take care.

    Kind regards

    Cedric M

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I fix windows update agent 32-bit vista Windows Update agent 7.6.7600.256 keep for lack of 8007041D error code

    How can I fix windows update agent 32-bit vista Windows Update agent 7.6.7600.256 keep for lack of 8007041D error code

    Clean boot tried tried reboot fix he said componet needs to be repaired

    Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

    1. when (date about) don't you buy the computer?

    2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

    3 a Norton or McAfee application ALREADY installed on the computer?

    4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

    5 are ALL the following updates listed in installed updates (not update history)? [1]

    (a) KB2705219, KB2712808, KB2744842 [KB2722913 or KB2719177 or KB2699988], KB2731847 [or KB2718523] and maybe KB2736233;

    (b) KB2698365, KB2691442, KB2655992 & KB2719985 [or maybe KB2721691];

    (c) KB2685939 and possibly KB2686833.

    (d) KB2658846, KB2659,262, KB2660649,562, KB2688338 & KB2690533 KB2676;

    (e) KB2393802 KB2644615, KB2633171, and especially KB971029.

    6. If Windows Vista Service Pack 2 is listed in the installed updates, when (the exact date) he was installed according to the history of the update (this time)? [2]

    7A. is the 7 Version of Java Update 7 (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://java.com/en/download/installed.jsp

    7 b. v11.4.402.278 is Adobe Flash Player (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://www.adobe.com/software/flash/about/7. Is Firefox, Chrome or any other alternative browser installed?

    8 is Firefox or another alternative browser installed in addition to Chrome?

    9 have you ever had the opportunity to do a repair installation or a clean installation of Windows?

    10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner Registry Cleaner)?

    ==================================================
    [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

    [2] start | Control Panel | Windows Update | View the update history (in the left menu)

  • Y at - it a patch for lack of MS Fax for Vista Home Premium?

    Y at - it a patch for lack of MS Fax for Vista Home Premium?

    Y at - it a patch for lack of MS Fax for Vista Home Premium?

    Hey Large Pa Billy

    software fax does not come with Vista Home Basic and vista Home premium

    you need vista business or vista ultimate to get the fax with the operating system software

    you will need to get 3rd party software with a fax of your vista machine Home premium

    read the information on the link on compensation available for the version of software of fax below

    http://www.snappysoftware.com/

    Walter, the time zone traveller

  • locks up PC / gets stuck in standby/hibernation mode

    I clubhouse of compaq with preinstalled windows vista that I bought the pc in September 2008 when I fist got the pc he would be stuck in standby/hibernation mode when I pressed on the moon shaped button or when I let it just fall asleep on his own. I went back to the futureshop in my period of 2 weeks buyers and they interlaced monitor as would the tower should green light that he was always on but monitor would remain off until I unplugged the pc from the wall (button / stop does not work)

    now almost 2 years later July 2010 I have problems with Explorer does not or anything like that to with the internet, even my network sharing Center wouldn't load so I took it with future shop service plan and they found some viruses but removal did not work, so they have restored and now I have new sleep problems and they advised me that it can't be fixed. I have disabled the sleep on the keyboard button, but left the pilot light. the technicians reported that they turned off and now it will not (duh!) they told me that I just have to live without it no idea what can help?

    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Try to reset the default power Plan settings. information is at the link above.

    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

    And how to solve problems in Standby Mode is at the link above.

    And read the information of 'Related links', too.

    See you soon.

    Mick Murphy - Microsoft partner

  • computer in hibernation for no reason.

    This week, my laptop HP Pavilion started in hibernation for no reason. I have reset the options to sleep forever and it still goes to sleep. To wake up I have to press the power button and the display shows the Windows recovery and it will up to the point where I was working when he fell asleep. What is going on?

    Quit Internet Explorer for Windows 7 | Performance & maintenance. MOD
    Metadata: Windows 7 - IE9

    Hello

    1. did you of recent changes to the system before the show?

    Method 1:

    Follow the steps from the link below and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

    Method 2:

    Follow the link below and run the fix - it tool and check if the problem is resolved.

    http://support.Microsoft.com/kb/920730

    In addition, check out the link below and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

    It will be useful.

  • RMAN backup for lack of archive log - Urgent

    Dear all,
    How to take backup in oracle rman for lack of logseq at logseq archiving log.

    Please help me urgent.

    Thank you
    Manas

    The SNA method before roll is easiest to get your sleep in harmony rather than completely rebuild.

    The RCS on primary continues to rise and if the archives get generated on primary at a regular stage, would be late the night before by a huge margin.

    If there is a gap of newspaper caused lack of archives and his backup is not available, then I'd rather go with the Roll Forward YVERT method.

Maybe you are looking for

  • fusion drive

    I just start up my iMac 27 "that I received in August 2016. I ordered a Fusion 1 TB drive. What is the profile of what it says. How will I know that's what I ordered? Somehow this iMac has no help.

  • Cannot chmod in directory

    Mavericks running. Recently, I moved my directory on a separate called drive USERS to mount/Users/MyName is my Mac or, when it is activated, a linux instance on a dual boot system.  To be usable on any operating system, I formatted the disc USERS wit

  • DV7-6c95dx: ADDING 2nd HARD DRIVE WE DV7

    ADDING 2ND HARD DRIVE - IT DOES NOT APPEAR UNDER MY COMPUTER - I DON'T KNOW IF SA FORMATTING OR NOT - CAN GET SOME DIRECTIONS - THANK YOU

  • Bad script ScriptLoader messages

    The message below is part of a series that I have to close it before that Firefox opens. All started about 4 days ago. I think it has something to do with Evernote. I was watching on my phone and I captured a Web page to save into Evernote. The Evern

  • Automatic processing of data from scanned questionnaires

    Can Acrobat recognize data from questionnaires and then scanned papers to extract these data to an Excel file?The AU format the Word blank questionnaire can be used if necessary.The data in question concerns:-issues- and answers (at least regarding t