standby of the comments file system create two snapshot files
Why would or should suspend the comments file system create two snapshot files.
In our environment, we have the following VMDK.
Syntest.VMDK
Syntest_1.VMDK
Syntest_2.VMDK
Syntest_3.VMDK
Syntest_4.VMDK
When I create a snapshot that suspends the comments file system it creates two syntest_1 - 000001.vmdk and syntest_1.000002.vmdk (as well as all of the files for snapshots). Here is a screenshot.
Why and is at - it something wrong? I can find a ton of articles on stereotypes, but nothing that speaks.
We are currently on ESXi 5.1.0,1157734.
Thank you
Mike
Out of curiosity. Are two snapshots created even when you create the snapshot manually?
With backup applications, this behavior is not uncommon. The first snapshot is created for the virtual machine write them changed data, while the current is/instant backup, and the second snapshot is created by the backup software to attach the virtual disk basic to the host/proxy backup as "independent - not persistent. Once the virtual disk is disconnected from the proxy the second snapshot will be discarded and then the first snapshot will be validated for the basic disk.
CBT information should not be reset somehow, but updated as changed during the backup data.
André
Tags: VMware
Similar Questions
-
Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework. I then have to wait anywhere from five to ten minutes only for Panel source monitor back to normal to continue editing, with playback. Itself doesn't freeze, I am able to go into my settings and change again within the sequence. It's only the source monitor. Anyone know this problem and is there a solution? Thank you! My apologies if this has already been discussed in another post.
I am running on a processor intel i5 processor 4690 k, 16 GB of ram, all-new msi motherboard and 980 gtx graphics card nine.
Under the key sequence, uncheck preview Composite during Trim.
-
I'm totally new to ESXi. I googled this answer apparently simple like crazy, but couldn't find a solid answer. If you install ESXi on a USB key or USB hard drive, where the guest os get installed? On the same USB device because the ESXi OS is installed?
I have a 40 GB usb hard drive, I want to install it. I don't want to touch none of the disks in my PC at all, but rather run straight from the USB key (similar to the live linux race). It will work all fine without any problem? I use it only for the purposes of learning, nothing major at this point.
Welcome to the community,
Unfortunately, this won't work. Virtual machines (i.e. the VMFS file system) are only supported on storage 'fast', i.e. the SSD/HDD or shared storage LUNs. You cannot create a data store VMFS on a USB device.
André
-
VMware server wiped the host during the generation of the comments operating system
Gidday,
System:
HP dc7800p sff
Slackware64-13
Kernel: 2.6.31.4
VMware serve 2.01 - build 156745
I tried to build a guest of windows on the network via a console on vmware server
We use a tftp boot server and use ximage to copy the image on the machine.
Everything seemed to go well when my screen was filled with random colors.
Restarts it tried to boot into windows, it is thoroughly confusing, because it's a dedicated linux machine.
After starting on a rescue cd, it seems that my old layout (4 sheets), it is now 1 NTFS partition and this partition is filled with a windows file structure and the corresponding files.
I am always tring to understand how a virtual machine that is supposed to write to a file has managed to clear the contents of my hard drive.
Someone at - he had similar experiences or ideas on how this could happen?
See you soon!
Dave
Well Yes, there is a SCSI device to passthru in there as well according to what/dev/sg0 described on the host that the client tried to do with this device, which may well explain the host getting wiped.
Safer to come just the hard and then create a new VM on the Server 2.x using this hard even though it must be said that I have never suffered this deliver me or heard someone else either.
Guy Leech
VMware vExpert 2009
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
How can I configure the profile when I create two instance on Linux?
Hello
When I install two instance on Linux, I always export ORACLE_SID with manually among SIDS. Any possibility is there an easy way to change bodies?
Thanks and greetingsYou can defined as aliases
Sid1 ='source /
.sid1'
SID2 ='source /.sid2' in .sid1 of .sid2 files, you can set everything you need NLS_LANG, ORACLE_HOME, ORACLE_SID...
Then simply type SID1 in your command line to define all variables.
-
Unable to synchronize the data file in dataguard oracle 10g R2 ASM
Hello
I use datagurd for my personal PC (vmware), OS-Solaris 10 x 86, DB-oracle 10 g 2.
I use a database db_name = test & db_uniq_name = test (primary) and db_unique_name = test2 (standby) standby
In the test instance, I have two diskgroup in ASM (Davis, HISTDG) and for test2 two more starts: (DBDG1 & HISTDG1).
Prob: Now when I create a tablespace to Davis (test instance) same thing happens again immediately in test2 (DBDG1) but when I create tablespace in diskgroup HISTDG of the test instance in the same is not get copied to HISTDG1 test2 pending . Even is immediately reproduce at DBDG1(test2 instance) but not HISTDG1 diskgroup
Appreciated for the answer.
Thank you
Published by: user11217569 on March 19, 2013 12:18 AMHello
Set DB_FILE_CREATE_DEST = "
as it can be null and is not really necessary
I then use db_file_name_convert setting as you had originally.
I hope this will solve your problemfor example
Set DB_FILE_NAME_CONVERT = '+ DELAFLOR', '+ DBDG1', '+ HISTDG', '+ HISTDG1 '.
and
whole set DB_FILE_CREATE_DEST = "
or if you use a file pfile deletes the line with DB_FILE_CREATE_DESTCliff nel
Published by: cliff64 on March 19, 2013 11:00
-
I have this card and I want to have a zoom in the part that displays the residential street names, but of course I don't want the names of streets on the large version of the map. Without creating two different files can I activate these layers to the map zoomed in the corner and keep them to the enlarged map? Or is there a different way I should go about it?
The reasoning to want a single file is because the streets and points of interest are evolving, it would be frustrating to manually change the street name of each file, as time passes and things could eventually be forgotten. Have a main file would eliminate errors or inconsistencies between two files.
Card has been designed using InDesign in Illustrator and has.
in indesign, make a right click on the image linked and select 'object layer Options.
-
I am changing a laptop Windows XP Pro using the converter software 4.0.1.
He will start the conversion process, but after 10 seconds or so, I get the error: failed: cannot create a snapshot VSS of the source volumes. Error 2147549183
The strange thing is my images of box Vista successfully without problem.
I'm in a corporate environment. I moved the laptop test I try the image of an OU restrictive and placed in a non-restrictive ORGANIZATIONAL unit (without firewalls and others). I always have the same question.
I made sure all the VSS services and these are running and active. I even tried MS KB Article 941956 comes to do even if it said it was only for Server 2003.
Any other pointers on this? It seems that a lot of people get this error, but the only ones I can find are for server operating systems... not XP.
In the event under application Viewer I have errors of:
Type: error
Event ID: 12292
The volume shadow copy Service error. Error creating the Shadow Copy Provider COM with CLSID {65ee1dba-8ffa-4a58-ac1c-3470ee2f376a} class
Type: WARNING
Event ID: 4356
{The COM system + impossible to create an instance of the Subscriber partition:{41e90f3e-56c1-4633-81c3-6e8bac8bdd70}!new:{d3938ab0-5b9d-11d1-8dd2-00aa004abd5e}. CoGetObject returned HRESULT 80070005
Type: WARNING
Event ID: 4353
The event of COM + a system attempted to raise the EventObjectChange::ChangedSubscription event but received a bad return code. HRESULT was80040201
Type: error
Event ID: 8193
Volume Shadow Copy Service Error: Unexpected error calling routine CoCreateInstance. HR = 0 x 80004002
You are able to start these three services; EventSystem, swprv, vss?
What is this command returns; "vssadmin list writers"?
Joakim
-
Can create manual snapshot, but VDR can't create a suspended snapshot
If I go into the Snapshot Manager, I can create a snapshot (System Quiesce invited selected file) all day, but VDR keeps giving me the cannot create a snapshot hanging on the same server error. I went through all the stuff for this KB. Is there something different in the way that VDR creates a snapshot from do it manually to the virtual machine?
If you disable the memory status and check the comments of quiesce file system option during an attempt of instant manual then it will mimic the operation of snapshot which initiates the VDR. If, as you have indicated that always work a manual snapshot, but not in the VDR initiates, try the following:
(1) the operation of manual snapshot as described above.
(2) if the instant manual successfully, then immediately open the plugin VDR and trigger a manual backup of the virtual machine. If the backup fails with instant failure, get the logs of the VDR (KB 1012282) device and open a SR
(3) if the manual backup is successful, then it might be a matter of resource conflict when the backup window is opened as part of the operation of backup... maybe the ESX newspapers may provide a clue.
-
Hello
I hope someone can help with this query.
I use the code that is very similar to the sample application camerademo to take a photo using the camera. It works properly on devices running OS5. However, on devices running OS6 photo is just an image of white/black.
I think I followed the problem until the encoding string passed to getSnapshot(). When I switch which must be a valid encoding string (based on the output of System.getProperty ("video.snapshot.encodings")) the captured image is a black screen. However, when I pass null to getSnapshot() it works correctly. I want to avoid using null as the captured image is much more that I need and for reasons of effectiveness, I would like to avoid having to reduce its size after the capture of the photo.
I tested this on the 9780 Simulator. The corresponding code is included below for reference.
Thanks in advance!
/* * CameraDemo.java * * Copyright © 1998-2008 Research In Motion Ltd. * * Note: For the sake of simplicity, this sample application may not leverage * resource bundles and resource strings. However, it is STRONGLY recommended * that application developers make use of the localization features available * within the BlackBerry development platform to ensure a seamless application * experience across a variety of languages and geographies. For more information * on localizing your application, please refer to the BlackBerry Java Development * Environment Development Guide associated with this release. */ package com.rim.samples.device.camerademo; import java.util.Vector; import javax.microedition.amms.control.camera.CameraControl; import javax.microedition.media.Manager; import javax.microedition.media.Player; import javax.microedition.media.control.VideoControl; import net.rim.device.api.system.Characters; import net.rim.device.api.ui.Field; import net.rim.device.api.ui.Keypad; import net.rim.device.api.ui.UiApplication; import net.rim.device.api.ui.component.Dialog; import net.rim.device.api.ui.component.RichTextField; import net.rim.device.api.ui.container.MainScreen; import net.rim.device.api.util.StringUtilities; /** * A sample application used to demonstrate the VideoControl.getSnapshot() * method. Creates a custom camera which can take snapshots from the * Blackberry's camera. */ final class CameraDemo extends UiApplication { /** Entry point for this application. */ public static void main(String[] args) { CameraDemo demo = new CameraDemo(); demo.enterEventDispatcher(); } /** Constructor. */ private CameraDemo() { CameraScreen screen = new CameraScreen(); pushScreen( screen ); } } /** * A UI screen to display the camera display and buttons. */ final class CameraScreen extends MainScreen { /** The camera's video controller. */ private VideoControl _videoControl; /** The field containing the feed from the camera. */ private Field _videoField; private Player player; /** An array of valid snapshot encodings. */ private EncodingProperties[] _encodings; /** * Constructor. Initializes the camera and creates the UI. */ public CameraScreen() { //Set the title of the screen. //setTitle( new LabelField( "Camera Demo" , LabelField.ELLIPSIS | LabelField.USE_ALL_WIDTH ) ); //Initialize the camera object and video field. initializeCamera(); //Initialize the list of possible encodings. initializeEncodingList(); //If the field was constructed successfully, create the UI. if(_videoField != null) { createUI(); } //If not, display an error message to the user. else { add( new RichTextField( "Error connecting to camera." ) ); } } /** * Adds the VideoField and the "Take Photo" button to the screen. */ private void createUI() { //Add the video field to the screen. add(_videoField); } /** * Initializes the Player, VideoControl and VideoField. */ private void initializeCamera() { try { //Create a player for the Blackberry's camera. player = Manager.createPlayer( "capture://video" ); //Set the player to the REALIZED state (see Player docs.) player.realize(); //Grab the video control and set it to the current display. _videoControl = (VideoControl)player.getControl( "VideoControl" ); if (_videoControl != null) { //Create the video field as a GUI primitive (as opposed to a //direct video, which can only be used on platforms with //LCDUI support.) _videoField = (Field) _videoControl.initDisplayMode (VideoControl.USE_GUI_PRIMITIVE, "net.rim.device.api.ui.Field"); //Display the video control _videoControl.setDisplayFullScreen(true); _videoControl.setVisible(true); } //Set the player to the STARTED state (see Player docs.) player.start(); } catch(Exception e) { Dialog.alert( "ERROR " + e.getClass() + ": " + e.getMessage() ); } } /** * Create a screen used to display a snapshot. * @param raw A byte array representing an image. */ private void createImageScreen( byte[] raw ) { //Initialize the screen. ImageScreen imageScreen = new ImageScreen( raw ); //Push this screen to display it to the user. UiApplication.getUiApplication().pushScreen( imageScreen ); } /** * Handle trackball click events. * @see net.rim.device.api.ui.Screen#invokeAction(int) */ protected boolean invokeAction(int action) { boolean handled = super.invokeAction(action); if(!handled) { switch(action) { case ACTION_INVOKE: // Trackball click. { try { //A null encoding indicates that the camera should //use the default snapshot encoding. String encoding = null; // All the below result in a black screen being captured on OS6 devices // encoding = "encoding=jpeg&width=1024&height=768"; // encoding = "encoding=jpeg&width=1024&height=768&quality=superfine"; // encoding = _encodings[1].getFullEncoding(); // Null works but the image captured is large (~1MB) encoding = null; //Retrieve the raw image from the VideoControl and //create a screen to display the image to the user. createImageScreen(_videoControl.getSnapshot( encoding ) );//null works } catch(final Throwable e) { UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { Dialog.alert( "ERROR " + e.getClass() + ": " + e.getMessage() ); } }); } return true; } } } return handled; } /** * Prevent the save dialog from being displayed. * @see net.rim.device.api.ui.container.MainScreen#onSavePrompt() */ public boolean onSavePrompt() { return true; } /** * Initialize the list of encodings. */ private void initializeEncodingList() { try { //Retrieve the list of valid encodings. String encodingString = System.getProperty("video.snapshot.encodings"); //Extract the properties as an array of words. String[] properties = StringUtilities.stringToKeywords(encodingString); //The list of encodings; Vector encodingList = new Vector(); //Strings representing the four properties of an encoding as //returned by System.getProperty(). String encoding = "encoding"; String width = "width"; String height = "height"; EncodingProperties temp = null; for(int i = 0; i < properties.length ; ++i) { if( properties[i].equals(encoding)) { if(temp != null && temp.isComplete()) { //Add a new encoding to the list if it has been //properly set. encodingList.addElement( temp ); } temp = new EncodingProperties(); //Set the new encoding's format. ++i; temp.setFormat(properties[i]); } else if( properties[i].equals(width)) { //Set the new encoding's width. ++i; temp.setWidth(properties[i]); } else if( properties[i].equals(height)) { //Set the new encoding's height. ++i; temp.setHeight(properties[i]); } } //If there is a leftover complete encoding, add it. if(temp != null && temp.isComplete()) { encodingList.addElement( temp ); } //Convert the Vector to an array for later use. _encodings = new EncodingProperties[ encodingList.size() ]; encodingList.copyInto((Object[])_encodings); } catch (Exception e) { //Something is wrong, indicate that there are no encoding options. _encodings = null; } } protected boolean keyDown(int keycode, int time) { System.out.println("Input" + keycode + "/" + Keypad.key(keycode) + " C1 = " + Keypad.KEY_CONVENIENCE_1 + " C2 = " + Keypad.KEY_CONVENIENCE_2); if ( Keypad.key(keycode) == Keypad.KEY_CONVENIENCE_1 ) { return true; } return super.keyDown(keycode, time); } protected boolean keyChar(char c, int status, int time) { System.out.println("Input" + c + ":" + Keypad.getKeyCode(c, status)); switch (c) { case Characters.ESCAPE: this.close(); return true; default: return super.keyChar(c, status, time); } } }
Thanks for getting back to me.
It turns out that it was only a problem on the Simulator. I managed to get my hands on a real device 9780 and the code works fine on it.
-
Hello
Is anyone know how you can activate alerts for comments (i.e. individual symptoms) file system free space without activating capacity alerts? Alerts from the ability to create a lot of noise. VRealize operations 6.1
Thank you
John
Go to the content--> Notifications and create a new notification. Set the type of object to the Virtual Machine and the Notfication trigger in the alert definition, then tap the alert that you want to be notified on. You can select any or all levels of criticality, and possibly under Advanced, you can choose any or all States of alert and statutes.
-
Problem to identify the control file when creating physical standby
Hello
(database version: 10.2.0.4)
linux platform)
I use the command below to create physical database from a backup before:
I already tried to cross but always give same errorrman target / auxiliary sys/tiger@paceview Recovery Manager: Release 10.2.0.4.0 - Production on Tue Sep 4 18:05:53 2012 Copyright (c) 1982, 2007, Oracle. All rights reserved. connected to target database: PACEVIEW (DBID=2092349485) connected to auxiliary database: PACEVIEW (not mounted) run { allocate auxiliary channel c1 device type DISK; set until sequence 38; duplicate target database for standby dorecover nofilenamecheck; } released channel: ORA_DISK_1 allocated channel: c1 channel c1: sid=35 devtype=DISK allocated channel: c2 channel c2: sid=36 devtype=DISK executing command: SET until clause Starting Duplicate Db at 04-SEP-12 contents of Memory Script: { set until scn 138180211934; restore clone standby controlfile; sql clone 'alter database mount standby database'; } executing Memory Script executing command: SET until clause Starting restore at 04-SEP-12 channel c1: restoring control file ORA-19625: error identifying file /backup/rman/paceview/DEL1_standby.ctl ORA-27037: unable to obtain file status Linux-x86_64 Error: 2: No such file or directory Additional information: 3 ORA-19600: input file is control file (/backup/rman/paceview/DEL1_standby.ctl) ORA-19601: output file is control file (/PGHProdDB/oradata/paceview/control1.ctl) failover to previous backup released channel: c1 released channel: c2 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of Duplicate Db command at 09/04/2012 18:01:44 RMAN-03015: error occurred in stored script Memory Script RMAN-06026: some targets not found - aborting restore RMAN-06024: no backup or copy of the control file found to restore
Thank youHello;
That's what I'd do:
Primary backup (change in your directory as needed)
RMAN RUN { allocate channel d1 type disk; backup format '/u01/backups/PRIMARY/df_t%t_s%s_p%p' database; sql 'alter system archive log current'; backup format '/u01/backups/PRIMARY/al_t%t_s%s_p%p' archivelog all; backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p'; release channel d1; }
Move the backup and duplicate like this:
rman target sys/password@PRIMARY auxiliary / RMAN> run { allocate channel C1 device type disk; allocate auxiliary channel C2 device type disk; duplicate target database for standby nofilenamecheck; }
For details of this method, see:
http://www.Visi.com/~mseberg/duprman2.html
Best regards
mseberg
-
That is to say the computer has an infection and turn on my protection against viruses (which is on) and buy their protection against the virus. Cannot run two updates from Microsoft and can not access all programs except the internet but don't let me download anything. Missing file is: tfswctrl
Hello
System Tools is a fake antivirus / spyware. We recently saw a lot as it was distributed through advertisements on legitimate websites unsuspecting when an advertising agency got threaten.
Whatever you do... do not buy this software.
Here is a link to instructions on how to remove it.
Good luck
-
I am running XP Professional 2002 SP3. It all started about six months ago I suspect with one of these updates. These files are located in the files with the associated files. There are actually hundreds of thousands of them. They have tripled the number of files on my computer. I want to know how to get rid of them and stop the system from their creation.
Hello Redoced,
I found an article from knowledge explaining that ~ WRL .tmp files are created by Word, further than the WRL type .tmp files are created by Clipboard actions.
Description of how Word creates temporary files
Because the problem you posted is related to the word and it would be better suited to the community of Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
Steven
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
If I copy and paste a comment in a pdf when I create a comment copied xfdf file is not included. Is it possible to add these comments copied to the xfdf file?
Hi Steve Whipple.
This link (Acrobat Help |) Import and export comments ) seems relevant to your query. Please let me know if it allows you to export xfdf file comments.
Kind regards
Rahul Tyagi
Maybe you are looking for
-
capture data using writing to the file position encoder
Hello dear Sir can anyone help to check with my encoder to measure data?I connect the writing to the file of the measurement, but when I open the .txt file,.no result is, thank you very much for your help
-
D: / is not readable. This disk structure is corrupted and unreadable. Shows when I try and look at photos on a CD that I created. Will work on the laptop, this disc was created, but does not and another laptop computer. Any ideas?
-
You can use the fax software of xp with a phone line I have just read
I want to be able to send faxes to my computer but I don't have a telephone line. can you set up the fax program windows XP on a single dsl line
-
HP Laserjet P1102w: P1102w - change password and now I can't print wireless network
Recently, I changed the network password on our router Cisco Valet and without realizing it seemed to me making the wireless printing stop workinig. I can always print to this printer via the USB cable, but it is not found on the wireless network. I
-
Just noticed something at the top of the page every time I scroll a black container happens. What is it? How can I disable it? in the example of cookbook it shows help add salt settings buttons