Standby power problems M30-344 (CPU uses only 600 MHz)

Hello!
In my m30 344 motherboard and display are changed.
Now I can't use the full 1.5 ghz cpu!
In the power saver profile I can choose only the cpu rate of 1-3! I've now uninstalled this tool and reinstalled the version by the net. But I can use only 600 mhz!
What can I do?

[Edited by: admin 7 May 05 08:18]

Hello

As far as I know if the motherboard is changed the speed of the CPU will be around 600 MHz and in this case the service partner needs to update the CPU microcode. After that, the speed of the processor will be as before.

I hope that you have already solved your problem with the speed of the processor.

Tags: Toshiba

Similar Questions

  • Hi people. Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

    Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

    Hello

    You will be able to use the watch in Europe.

    There is no regional differences in the hardware and the software can be configured to your chosen region. The supplied USB power adapter will have to pine trees located in the United States. A travel adapter will allow you to connect it to the European outlets.

    Alternatively, you can buy an Apple USB power adapter that is located in your country of destination / country.

    For example:

  • Satellite M30-951 - processor clocked at 600 MHz (it must be at 1500) - high energy saving

    Hello

    earlier this year, a company has changed the case of my laptop. Since that time on the laptop was very slow. I thought it has something to do with the software, but after a new installation, the problem was not solved.

    Now, I used severel programs to check the speed of the CPU. Programms all tell me that my CPU Speed is 600 MHz (it must be at 1500 MHz).

    The laptop is connectet to current alternative and energy-saving is high. I did a bios update and spent setting the CPU in the Bios of dynamics to high. But no sollution.

    Then I saw that my fan does not (at the beginning, or when I use Notepad). I thought that his damaged, but I tested it on another laptop and the fan works perfectly with 5V.

    Moreover no program shows me the temprature, so I think the sensor of temprature or anything else is failure, so that the fan does not work and the CPU is at each time at 600 MHz.

    Does anyone have an idea how I can fix this problem or I have to change?

    Thank you very much

    Concerning

    Nassim

    Seems you have tried almost everything that can be done now.
    And I agree with you that there could be something wrong with temperature sensor and this is why I advise you to go to an authorized service provider to verify if this is really the problem.

    Before you do, you could try if the programmable notebook hardware control (NHC) can display the temperature because it is a very good tool. But as you say, no other tool could do this job, I doubt that it can control it. But worth a try.

  • Satellite M30-344-CPU cooling fan noise

    Hello world...
    I have a satellite m30 344... it is 1 1/2 year... and now, I had a problem with my cpu... fan is making a horrible noise... and the air flow is not good...

    I'm looking for how clean my fan... I removed the keyboard and I also took into consideration... but could not find any access to the cpu fan...

    can someone make a suggestion how to clean the fan to the processor in my laptop?

    THX
    ascorbin

    Post edited by: ascorbin

    Hello

    In my opinion, it's a very bad idea to open Notepad on your own. As you know that books are very sensitive units and if you have no experience you shouldn't do this. I guess that the guarantee is valid for two years and open Notepad, you can void your warranty.

    I'm sorry, but I put t see any means cleaning without dismantling because there is no cooling grilles of ventilation and air in the lower corner. On some laptops from Toshiba, the of cold air is visible and the cleaning procedure is much easier.
    Before doing something wrong contact partner in your country. It is also possible that there is a problem with the CPU fan and it can be exchanged.

    Good bye

    Post edited by: Barrie

  • Qosmio F10-105 only works with the 600 MHz

    Hello

    My f10-105 run only @600 Mhz! in the bios and in power options I have select provincy.
    the verse of the bios. East of 1.20
    someone at - it an idea?

    THX

    Hello

    Usually after the replacement of the motherboard, it may happen that laptop runs just at 600 MHz. In this case you should contact the Service partner. The firmware must be written again. If the partner doesn't to do this, the machine runs at a speed fixed Service 600 MHz.

  • I bought my palm tx 3 years ago... problem: the power button work anymore; appear it only in a white light scanning when I press on the back 'home '.

    I've had my palm tx for 3 years now and I have had some problems with it. (because I bought it on the web, there was the guarantee) the first problem is the "power" does not work anymore? and the second, the scan goes blank (white) when I press one funds 4 (calendar or at home...). What could be the case of this defect?

    I bought my palm tx 3 years ago... problem: the power button work anymore; appear it only in a white light scanning when I press on the back 'home '.

    The warranty on a TX is only 1 year from the date of purchase.  Yours is way past the period covered.

    The switch was a small part of the TX.  Pressing any other button will turn on the unit, and it will turn off let it expire.

    There is a wire on the switch repair yourself, if you're a DO-IT-YOURSELF person here type:

    http://Forum.Brighthand.com/showthread.php?t=255871

    Have you tried a Soft Reset?  A warm reboot?  A Hard Reset?    Resets are explained here:

    http://KB.Palm.com and enter 887 'ID of Solution '.

    WyreNut

    Message relates to: Centro (AT & T)

  • Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

    Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

    If you had bought subscription Acrobat Standard / stand-alone product , you need to cancel the subscription / order and re - register / re - order subscription Acrobat Pro DC / stand-alone product.

  • Satellite M30-801: CPU only works with a 600 MhZ

    Hi people, I have a strange problem since my PC back to toshiba support (lcd problem, on assistance report i red that the pcb has been replaced): my CPU goes up to 600 MhZ. I tried to update the version of the bios from 1.20 to 1.70 successfully and I have restored the default value believing it could be a related problem of bios , but nothing changes.

    The problem is present in a new installation of Windows XP (from recovery CD), so I think I could exclude a software problem.

    Any ideas?

    Thanks in advance
    Roberto

    Hello

    The update of BIOS does ' t solve this problem.
    It seems that the Toshiba service partner forgot to start several compatibility tests. This is necessary after some repair procedures. Without this additional test, the CPU does not work with maximum efficiency. Well, there is nothing to see. You must contact the service again and it should solve this problem.

  • Satellite Pro U400 starts - power problem?

    Hey,.

    my liquid U400 down without any reason and doesn't start anymore.
    My first idea was damage from CPU, but even if the laptop is taken to power the power led does not illuminate.

    (1) make U400 notebook work normally when the battery is removed, but pluged in power? Because if not maybe only the battery is broken.
    (2) any other ideas? :)

    Guarantee is more than 1 months :(

    Answer to your question is YES. You can remove the battery and use your laptop with AC power only. In most PC stores showing the rooms are placed laptop without battery. Probably the batteries have been stolen in the past.
    Anyway, they can run with AC power only.

    When you connect the laptop to the power plug and the power light is not on I assume that there is a problem of electronic power supply.
    Contact the nearest authorized maintainer and ask for help.

  • Portege M200 - CPU runs only at 598 MHz! Basic BACK Toshiba Service tool

    Portege M200 - CPU runs only at 600 MHz

    I have a Portege M200 with a Dothan Pentium M 725 supposed to run at 1.6 ghz, but posts a 598 Mhz
    frequency. I updated the bios to 1.8.

    I read in a previous post "locked"...:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63390

    .. He's supposed to be a base of BACK of Toshiba utility to fix the problem. .
    It is said that this is not a Bios problem...

    Can someone direct me to this utility?

    Thank you!

    Gary

    The answer is here... thanks all and who is responsible for:

    http://forums.Toshiba.com/T5/Qosmio-laptops/598-MHz/TD-p/194566

    The key is a utility called 'pom200t1 '.

    You will need the following.

    A floppy disk or if you do not have an external floppy drive, or if you are common sense to be able to boot a file from a CD player.
    You must also WinImage, as all files that you download come as .ima files
    Download pom200t1 - V1.5.zip and pom200t1.zip (if if doesn't work either).

    You can find them here:

    http://www.stormpaintball.com/Toshiba/pm765.bin (this one is a ditch last attempt).
    Then follow the instructions on the site I posted before:

    Symptom: CPU remains constantly 598 MHz.

    * Process: *.

    (1) boot in the BIOS. (Press "Esc" during the boot process, before the loading of the operating system, but after having entered your password, if you use the startup password protection).

    2) look under 'Other' category.

    (3) if the motherboard does not have enough information about the CPU, the category 'Dynamic CPU frequency Mode' appear on (you won't see it).

    If the laptop is in this state that he won't ever faster than 598 Mhz until you perform the following procedure.
    Note: Although this utility said it's for a Toshiba Portege M200, the particular difficulty you need may work on other Toshiba laptops.
    He has worked on 3 different Toshiba Satellite Pro M15 S405s, but * USE at YOUR OWN RISK *.

    (1) start Windows and create the startup disk in the pom200t1.exe file.

    (2) boot from the diskette you just made.

    (3) in the menu, select the initial repair option 2 "set config".

    (4) in the following menu, select option 1 'Initial cofiguration"(misspelled)

    (5) after a few seconds, you should see "Writing a file is over!" and the laptop restarts automatically without asking for confirmation.

    (6) when restarting the laptop go back into the BIOS and look under 'Other' category. You should now see the "dynamic CPU frequency Mode". Make sure it is set to "Dynamically switchable" for the CPU limitation.

    7) restart Windows and make sure that the CPU can throttle in normal conditions. The Intel SpeedStep technology icon should now be in the systray. Go to the Toshiba power management / Power Saver Properties and update all of your methods to save power to use technology SpeedStep that you prefer (fixed or automatic) and mount all caps speed processor, or you can go above 798 MHz because cursors will always be to their previous settings (4 or less), while they can now go up to 7. Let me know how you go.
    I have fixed the CPU now just need to find out why my fan only works when I activate it manually!

  • Satellite M30-344 would not start

    Hello!

    I have a Toshiba Satellite M30-344.
    I have use Notepad for several weeks. Now, whenever I start the laptop computer, an error message appears: "0203: failure IDE #2 - you want to start the installation.
    Since the last use, I has not changed anything on the configuration.
    The only problem there is that I forgot to turn it off, and he continued to run under my table for more than 2 weeks.

    Is there a way to fix this?

    Thank you for your help.

    Greetings from the Germany!

    Hello

    .. Oh dear, you're not kidding? You forgot to turn it off and kept under a table? Man, that s REALLY weird. :)

    And now, to help you with your problem:
    IDE #2 means the DVD player, if you have a few options to bring your machine to life, because your DVD player might be defective.
    First of all, try to enter the BIOS and do everything by default. If you didn t get results, then remove the disc by unscrewing the screw under the drive and gently pulling the drive out
    THA machine. Alternatively, after you unscrewed, gently open the reader and then pulling it by the internal transport of the reader.

    In case of doubt, how or afraid to damage something, then bring your machine to a local ASP and they will help you with your problem.
    So, I think, your drive is probably faulty.

    Welcome them

    P.S.: And try to remember next time when what you keep under your table such as notebooks, animals, humans, gremlins... ;)

    Beautiful weekened

  • Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

    Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

    Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

    I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

    I have xp of the process and have nothing wrong.

    Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

    Any suggestions would be greatly appreciated.

    Thank you! :>)

    Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

    I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

    I have xp of the process and have nothing wrong.

    Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

    Any suggestions would be greatly appreciated.

    Thank you! :>)

    The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

    To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

    That's what * I * would call cleaning and optimization of a Windows XP machine:

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update:
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • Re: Portege M200 - CPU runs only at 600 MHz

    Hello

    I bought a Dothan M755 2 GHZ processor for my M200. I installed the CPU with no problems, but now I have a: this CPU only runs at 600 MHZ. It seems to me that it works on the power saving mode, but I have the tablet on power supply.

    I tried an option in the bios to health, but there is nothing. My version is (seen in the top right corner in the bios): "ACPI BIOS Version 1.80"

    My OS is Windows 7 Prof

    Y at - it a possibility (update of the BIOS? etc.) to fix?

    Thanks for your support!

    Hey,.

    That s the speed step function and the kicks in the multiplier 5 x to save energy.

    Check the BIOS if you can find the setting on the speed step and turn it off. If you do not have such an option in the BIOS choose another plan and the value 100% minimum processor state. It will always run at 2.0 GHz.

    Check this box!

  • Standby power 7 Tecra 9000

    Hello world

    I realized that newer versions of Toshibas Power Saver
    available for the new notebooks Tecra. I use Power Saver 4 on my Tecra 9000. I just tried to install the latest version of PowerSaver on my Tecra 9000. Installation seems to work, but after completing the procedure, an error sound due and energy savings has not started properly, but I have no massage error. If I try to run the energy saver manually I don't receive a massage of error, that I don't have permission to start the process!
    Is it possible to install and use a newer version of the saving on the Tecra 9000? What is the latest version that I can use on the Tecra 9000? I hope that no version 4?

    Best regards

    Mason

    Hi Matty

    Can you please tell me do you have had problems with energy savings? For each series of notebook for each laptop model there are aligned in each model versions, and you can use only the energy savings that are made for your model of 9000.

    Believe me, the best version for your Tecra is the version that you can find on the CD tools & utilities. If there is no problem with energy saving, it is not necessary to make any update.

  • Satellite Pro M30 - 344 recovery disk availability?

    Toshiba dear owners,

    Someone has in stock / on sale... The recovery disk
    the value of the M30 344 in English. My game is only
    in German. (Win XP Home / Pro)

    Thanks in advance,
    Antti

    Hello

    As Feliks said installing WXP Microsoft version full English and use the drivers from the download page. You can find them in all languages.

Maybe you are looking for