Standing ring not updated or by sending reminders

Similar Questions

• Possible bug: constant Typedef ring not updated...

  I have a constant control of ring, which is defined as a strict type def.

  If I select an instance of the control in my diagram and 'open the typedef', I can't change, no problem.

  I then click 'apply changes' and 'save' and expect any changes to be propagated to each instance of the control (such that it works with all other controls that I use). If I run the code and observe the values, they are held as the previous version of the control.

  If I delete the instance of the control and then add it again, the new values are found.

  It's frustrating, because I have to remove and re-add all cases, whenever I change something. I've seen this behavior in other controls as "apply changes" has always worked as I expected.

  Anyone seen this before?

  I'm using LabVIEW 2012, SP1, Build 12.0.1 (32 bit).

  Thank you

  Matt

  It is design - http://digital.ni.com/public.nsf/allkb/46CC27C828DB4205862570920062C125

• Ring type constant def not updated for LabVIEW 2010 SP1

  I have a problem with the update of the control ring LV 2010 SP1 constants.  If I change the values or names of elements of a ring of control that has the defined type (type def or type strict def) my constant schema do not update.  The constants are set to Auto-Update of type def and if I right click on the constant, change to a control and then back to a constant, they update very well.  And if I have a control/indicator on the comic it refreshes also very well.

  Anyone else seen this problem or can someone seeks to duplicate?

  LV 2010 SP1 bug?

  Thank you

  Dan

  It is not a bug. See here - http://digital.ni.com/public.nsf/allkb/46CC27C828DB4205862570920062C125

• Photo ring Type Def not updated

  I have a ring of photo type def.  I used it in an another vi.  At the time, the ring of photography has only 5 photos in there.  Later, I added another image to the ring of pic type def, but not a not updated of the vi.  Why is this?

  Given a ring of photo is just another type of ring, see if these appy son message

  Ring type constant def not updated for LabVIEW 2010 SP1

  strict type of ring bat bug?

  Strict Type def with Menu ring does not automatically update the related constants

• Update continues to send the same updates. Can not turn it off.

  Update continues to send the same three updates. I have install and the update comes with the same
  updates.

  Go to windows update and disable the updates that you have already downloaded, if they managed before.  And then on the update contained a right click on it and select Hide update and this should get rid of your problem.  It is a Microsoft problem they are working on but it won't work you will always receive other updates, but not those that you have hidden.

• Send-LinkedCloneRecompose is not updated to the Image on the pool name

  Hi all

  Using the command "Send LinkedCloneRecompose", everything seems to work properly:

  • The PS command indicates that the workstations will recompose (watch, unchanged VMs: 0).
  • The pool has a task to reconstruct for all desktop computers.
  • Pool tasks window shows that the action recompose for the correct snapshot.
  • A new replica is created in vSphere.
  • Desktop computers are recomposed OK.

  Get-pool-Pool_id "$poolID" | Get-DesktopVM | Send-LinkedCloneRecompose - ParentVMPath "$parentPath" - ParentSnapshotPath "newSnapPath" - annex ((Get-Date).) AddMinutes (1)) - forceLogoff $false - stopOnError $true

  Problem:

  • Check information pool in view administrator, the name of "The Image" shows again the old cliché– it is obviously incorrect. This would normally change to the new name of snapshot if the operation recompose is performed from within the Administrator display.
  • Using Powershell to query pool information, the same details appear - the old name of the snapshot is written.

    > Get-pool-Pool_id "$poolID".

    >...
    

    > parentVMSnapshotPath: * original old cliché way *.

    >...
    

  So, is this a bug? Can it be reproduced, or - is this a problem that I am experiencing?

  Any ideas?

  Thank you.

  Using LinkedCloneRecompose-sending does not update the configuration of the pool - it reconstructs only the virtual machines to the specified image.

  You must use the command Update-AutomaticLinkedClonePool, use it as below only would change the parent VM and snapshot leaving all other pool settings as they are.

  Run presents first, and then use the send-LinkedCloneRecompose to rebuild the VMs system to the last image.

  Update-AutomaticLinkedClonePool-pool_id «$poolID' - '$parentPath' parentVMPath - parentSnapshotpath «newSnapPath»

  Get-pool-Pool_id "$poolID" | Get-DesktopVM | Send-LinkedCloneRecompose - ParentVMPath "$parentPath" - ParentSnapshotPath "newSnapPath" - annex ((Get-Date).) AddMinutes (1)) - forceLogoff $false - stopOnError $true

• I've updated to the latest version, but gmail said I did not and continues to send me to the browser download page.

  When I try to download the new version of Firefox, I get a window saying: save the file or cancel. When I hit save file, nothing else happens. I went through Google chrome and downloaded the new version, went in the downloads and delete older versions, but I always get a message on gmail that I have not updated to the new version and when I try to go to some sites I am sent to your browser upgrade window.

  You have a user agent that is corrupted by the Fast Browser Search (FBSMTWB) and which identifies you as Firefox/3.0.12

  • Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; RV:1.9.0.12) Gecko/2009070611 Firefox/3.0.12 (.NET CLR 3.5.30729) FBSMTWB

  See:

  • https://support.Mozilla.com/kb/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• Send an email on Windows 8 not updated

  I have a new computer with Windows 8.  My yahoo email that is on my e-mail application is not updated regularly.  Any suggestions?  Y at - it an option on the frequency that it is updated.  I thought it was supposed to be 'live' with the update in real time, but which does not occur.

  Hello wiwetz,

  I would like to confirm that I understand your concern. You are not to receive e-mail messages that they arrive?

  For the e-mail application to receive the electronic as they arive, the Mail app must be enabled on the lock screen. You can add Mail to the lock of the start screen->-> change PC settings-> settings-> lock screen aps.

  You may also change your synchronization settings.

  To change your sync settings

  1. On start, tap or click Mail.

  2. Enter in the right edge of the screen, and then tap Settings.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, then clickSettings).

  3. Press or click accounts.

  4. Press or click the account you want.

  Adjust these settings:

  • How many times your email Mail Downloads (for action as they arrive at all hours, or manually).

  • Back to how to pass messages (as short as three days at any time).

  • What content you want to downloaded (e-mail, calendar, contacts).

  Mark

• "Mail" will not update!

  After installing the new update for my iPhone SE my email in "Mail", will not update. No new email comes through. Thank God the "Mail" is updated on my IMac desktop computer. So, this must be a problem with the new IOS 10? Right? I know that if I contact my ISP provider, they will say that it's an Apple problem and vice versa. What should do?

  Greetings nuguy2,

  Thanks for your post. It seems that your emails only are not updated on your mail app on your iPhone after updating to iOS 10. I can't wait to hear this. I know that I trust emails all the time. I'll be happy to help you.

  Take a look at this article: get help with Mail on iPhone, iPad and iPod touch - Apple Support

  In particular, the best thing to do is to delete and re-add the account as long as your email account is configured for IMAP. Here's how to remove and re-add the account

  Remove your e-mail account and set it up again

  If you still have problems with sending and receiving e-mail, try to remove your e-mail account of your device, then add it back again:*

  1. On your computer, connect to the site is Web of your email provider to check that all your e-mail or check if your e-mail is saved somewhere other than your iOS device.
  2. On your iOS device, tap Settings > Mail, Contacts, calendars.
  3. Press the e-mail account that you want to remove.
  4. Press to delete the account.
  5. Add your account again.

  * iOS backups in iCloud and iTunes include a backup of your e-mail settings, but not your emails. E-mail deleted from your iOS device are not recoverable from iCloud iTunes backup. Learn more about backups in iCloud and iTunes.

  Take care

• will not update updates from hp

  It says that I have an HP update when I click updates, it passes through the audit & when it becomes too prepare the list of actions that it worked for 30 minutes and always running is this normal to take this long to prepare the list of actions.

  Hi @fran77kel,

  Thank you for having responded quickly. Do not update it with HP support assistant. I will send you a link to update the bios. Please visit the link: http://hp.com/drivers please follow the on-screen instructions and update the bios. I hope that it pans well. Trust me, I did a lot of research and a lot of effort went into this to help you.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Please keep me posted as to how things went.

  Now carefully and have a great week ahead.

• Why does not update my Mac/Itunes

  Dear all,

  New to this forum thing but I have no were else to turn.

  I recently bought a new mini Ipad 4 running the latest OS 9.2, however when I have the cable link to my Mac, it is not recognized due to my Mac running an old Itunes.

  So, as any who would put you at day - however, my Mac tells me that I run later: Mac OS X 10.6.8... It does not update further. Then, my Itunes is 11 V. 4 and when I go to apple.com, it won't download any version later i.e. V12

  So now I have an ipad that I can't fully use

  My Mac features;

  Model ID: iMac10, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Many thanks to anyone who has faced a similer problem or knows how to solve this problem

  C.

  PS - I've read about the update OS X El Capitan, but it seems that many people have problems with it, so I have not upgraded to this OS

  "it will be not updated everything.

  That does not mean that you cannot upgrade to a new OS X. There is a difference between an update and upgrade. Just because you read that some users have had problems with El Capitan, does mean you want.

  The minimum requirement of OS X for iTunes 12.3.2 is OS X 10.8.5 or later as shown here > Download iTunes 12.3.2

  If your Mac meets the requirements, you can upgrade for free directly to El Capitan v10.11 > OS X El Capitan - technical specifications

  El Capitan is available for free on the App Store.

  Then you can update iTunes to sync with your new iPad.

  If your Mac does not meet the requirements of El Capitan, see if your Mac can pass to v10.8 Mountain Lion > system requirements for OS X Lion mountain

  If so, you can buy at the Apple Store Mountain Lion > http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Apple will send you a confirmation email with a redemption code. You can use this code to purchase on the App Store to download Mountain Lion.

  Very important to read this thing before upgrading to snow Leoaprd > the upgrade of 10.7 and don't forget Rosetta! Apple Support communities

  post edited by: CS

• Updates do not update.

  My computer is barely a year old, and I usually never miss an update. However, I went to travel recently could not stay connected to the internet long enough to download anything and ignored my updates for about a week. Now I'm back, and nothing will download. I tried to download it all night and he kept on the "install updates" screen before closing and kept at home for two days before I finally forced to stop so I can get some work. I tried to install an update to the time (have a total of 10) and whenever I click on download, it will happen to some random % and then I get error message saying updates Windows has stopped, I click OK and need me the menu "help", which helps not at all. I don't get an error code, Windows Updates does not close after the message, or it freezes up, it just keeps trying to download.

  Please do NOT ask me for the error code I received. I don't have an error code. If I did, it would make my problem ten thousand times easier, and I wouldn't be here.

  Hello

  • You get the error from the Windowsupdate log?

  However, you can try these:

  Has) download the stand-alone package updates that have failed to install.

  i. Please note number KB article for the specific update that failed. Visit the Microsoft Download Center and download the updates manually on the site.
  II. Microsoft download Center: http://www.microsoft.com/downloads/en/default.aspx 
  III. Enter the item in the field number search and download the same.
  IV. double-click on the downloaded file.
  v. and click Run and follow the wizard to install.

  B) run the system update readiness tool.
  For more information about how to download and run the system update readiness tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821 Description of the system update tool for Windows Vista and Windows Server 2008: http://support.microsoft.com/kb/947821

  In the link above, scroll down to the "Microsoft Download Center" section and then click on the link to download the update for your operating system preparation tool.

  C) try to reset the windows update components and verify if you are able to install.

  You can reset windows update components by referring to article: how to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us

  Diana
  Microsoft Answers Support Engineer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• can not update; "" Windows or windows defender ' more and I lost my; "' help and support ' file system on startup. Need help to get all that, please.

  I can't update "windows" or "windows defender". Followed the steps described by Microsoft help, tried to download manually, have asked Microsoft to help (no response yet) these first two things didn't work. I even had something like; change setting.that message security came for "Windows update", I have change the security setting, did not just well, still nothing.
  Windows Defender gives me an error code that looks like this;
  Error Code 0 x 80070005
  That's all I can get, and it will not update.
  and on top of it, I've lost my "Microsoft Help and support (it) when I click Start and click Help and support, I get a (?) all help options or when I click on it nothing there is totally 'empty '.
  I have one more problem.
  I tried to defrag my computer, and I can't do it either. I get a grey screen and if I click on anylise or defragment, it does nothing, no error message or anything else. Tried to manually defragment Traore does not work, tried to load a defrag on the web program, wouldn't let me load it.
  Nobody knows what happens here? why I'm having these problems all of a sudden? I do nothing but send E-mails and read my emails and I do not browse the internet or enter sites that are safer. So, what can I do? How to make everything return to normal? can someone help me with this?
  Also let me tell you right now, I'm not an expert on how to do things on the computer, so I'm scitish when it receives or sounds complicated. I don't want to lose my entire system because of these unfortenate none of the work programmes.

  Hello shessy49, welcome.

  I would recommend that we run a SFC (System File Checker) first scan to see what he finds. Try this:

  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. go to the "Startup" tab and uncheck all the entries displayed
  4. click on 'Apply' at the bottom right
  5 restart your computer

  ---
  After the reboot
  ---

  1. click on START
  2. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  3. type "sfc/scannow" (without the quotes) and press enter

  If the question started very recently, you can try a system restore:

  1. click on START
  2. click on "all programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am running Xp SP2 Windows does not update anything more and gives me [error number: 0x8024400A] Why can't update Windows again?

  I am running Xp Sp2 and about a month, there are, I tried updating to SP3 (new) and it sends my computer fits in. It keeps just reboot and reboot (SP3 has always done this has my computer since its release). I had to do a cover of the plant to return to the place where he could start normally but now Windows does not update anything. I go to Windows Update, it goes through the motions of checking to see if everything is legitimate, click the express button and gives me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024400A]   After going through the links provided and find no solution the last link sent me here. So why can't update Windows?

  Hi kriplurr,

  Thank you for keeping us posted about the State of the question.
  I'm glad you are able to run the updates.
   
  You can download the Windows Installer under the following link and check.
  Windows Installer 3.1 v2 (3.1.4000.2435) is available
  seehttp://support.Microsoft.com/kb/893803
   
  Or you can download it directly at the following link.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25
  (a) click on the above link.
  (b) click Download next to WindowsInstaller-KB893803-v2 - x 86-.exe
  (c) install and check.
   
  Hope this information helps.

• Standalone update Windows Vista service pack 2 32-bit does not update because of missing files in service pack 1.

  Original title: lack of vista service pack 1 files

  updated standalone service pack 2 32-bit tells me he does not update my copy of vista 32 with service pack 1 installed. due to the missing files in service pack 1. Windows update says all updates, including service pack 1 are current and accurate.

  Hello

  What is the full error message that you receive?

  Method 1:

  You can see the KB article to reset the Windows Update components and check if you can install the stand-alone package of Vista Service Pack (SP) 2.

  How to reset the Windows Update components?

  Method 2:

  If the problem persists, then you can try the steps in the following article and check if this can help:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Method 3:

  You also, try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7